Dr Atanas Ivanov

Publications

Journal Papers

(2011) Ivanov, A., Shabgard, MR., Seyedzavvar, M. and Oliaei, S., A numerical method for predicting the depth of heat affected zone in EDM process for AISI H13 tool steel, Journal of Scientific and Industrial Research 70 493- 499

(2010) Popov, K., Dimov, SS., Ivanov, A., Pham, DT. and Gandarias, E., New tool-workpiece setting up technology for micro-milling, International Journal of Advanced Manufacturing Technology 47 (1-4) : 21- 27

(2009) Ivanov, A., Shabgard, MR. and Farahmand, MR., Mathematical modelling and comparative study of the machining characteristics in ultrasonic-assisted electrical discharge machining of cemented tungsten carbide (WC—10%Co), Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture 223 (9) : 1115- 1126

(2009) Abdullah, A., Shabgard, MR., Ivanov, A. and Shervanyi-Tabar, MT., Effect of ultrasonic-assisted EDM on the surface integrity of cemented tungsten carbide (WC-Co), The International Journal of Advanced Manufacturing Technology 41 (3-4) : 268- 280

(2008) Ivanov, A., Ferri, C. and Petrelli, A., Electrical measurements in micro EDM, Journal of Micromechanics and Microengineering 18 (8) : 085007

(2007) Pham, DT., Ivanov, A., Bigot, S., Popov, K. and Dimov, S., An investigation of tube and rod electrode wear in micro EDM drilling, International Journal of Advanced Manufacturing Technology 33 (1-2) : 103- 109

(2006) Popov, K., Dimov, S., Pham, DT. and Ivanov, A., Micromilling strategies for machining thin features, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220 (11) : 1677- 1684

(2006) Gandarias, E., Dimov, S., Pham, DT., Ivanov, A., Popov, K., Lizarralde, R. and Arrazola, PJ., New methods for tool failure detection in micromilling, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220 (2) : 137- 144

Conference Papers

(2005) Uriarte, L., Ivanov, A., Oosterling, H., Staemmler, L., Torben, P. and Allen, D., A comparison between microfabrication technologies for metal tooling, 4M 2005: First International Conference on Multi-Material Micro Manufacture, 4M 2005: First International Conference on Multi-Material Micro Manufacture

(2005) Bigot, S., Ivanov, A. and Popov, K., A study of the micro EDM electrode wear, 1st Multi-Material Micro Manufacture

(2007) Ivanov, A., Ferri, C. and Petrelli, A., Electrode wear ratio and its effects on process modelling and process Capability, I*PROMS2007

(2009) Ivanov, A. and Ferri, C., Micro EDM process Tolerance and its Effect of Electrode Wear Compensation, 9th euspen International Conference

Book Chapters

(2006) Reza-Shabgard, M., Ivanov, A. and Rees, A., Influence of EDM machining on surface integrity of WC-Co. In: Menz, W., Dimov, SS. and Fillon, B. eds. 4M 2006: Second International Conference on Multi-Material Micro Manufacture. Elsevier Science 331- 334

(2006) Rees, A., Dimov, SS., Ivanov, A., Herrero, A. and Uriarte, LG., Micro EDM: Accuracy of on-the-machine dressed electrodes. In: Menz, W., Dimov, SS. and Fillon, B. eds. 4M 2006: Second International Conference on Multi-Material Micro Manufacture. Elsevier Science 361- 364

(2005) Herrero, A., Goenaga, I., Azcarate, S., Uriarte, L., Ivanov, A. and Rees, A., Mechanical micromachining by milling, wire EDM, die-sinking EDM and diamond turning. In: Junkar, M. and Levy, PR. eds. Proceedings of the 8th International Conference on Management of Innovative Technologies - MIT'2005, Fiesa, Slovenia, 22-24 September 2005. Slovenia : Laboratory for Alternative Technologies – University of Ljubljana

(2005) Pham, DT., Dimov, SS., Bigot, S., Ivanov, A. and Popov, K., Micro EDM drilling: Accuracy study. In: Bramley, AN. ed. Advances in integrated design and manufacturing in mechanical engineering. Kluwer Academic Publishers 281- 294

(2005) Ivanov, A., Pham, DT., Dimov, S. and Bigot, S., Micro EDM drilling: accuracy study. In: Bramley, AN. ed. Advances in Integrated Design and Manufacturing in Mechanical Engineering. Kluwer Academic Pub 281- 294