Rees, DWA. (2018) 'The Mechanics of Elastic Solids'. Wspc (Europe). ISSN 10: 1786346168 ISSN 13: 9781786346162

Rees, DWA. (2016) 'Mechanics of Solids and Structures'. World Scientific Publishing. ISSN 13: 978-1-78326-396-7

Rees, DWA. (2014) 'The Mechanics of Engineering Structures'. World Scientific Publishing Co Inc. ISSN 10: 1783264039 ISSN 13: 9781783264032

Rees, DWA. (2012) 'Plane strain compression of aluminium alloy sheets'. Materials and Design, 39. pp. 495 - 503. ISSN: 0261-3069

Rees, DWA. (2012) 'Mechanics of deformable solids'. Studium Press LLC. ISSN 10: 1-933699-620 ISSN 13: 9781933699622

Rees, DWA. (2011) 'A theory for swaging of discs and lugs'. Meccanica, 46 (6). pp. 1213 - 1237. ISSN: 0025-6455

Rees, DWA. (2009) 'Mechanics of optimal structural design: minimum weight structures'. Wiley. ISSN 10: 0470746238 ISSN 13: 9780470746233

Rees, DWA. (2009) 'Descriptions of reversed yielding of a solid circular bar in torsion'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (3). pp. 557 - 571. ISSN: 0954-4062

Rees, DWA. (2008) 'Deformation and rapture of stainless steel under cyclic, torsional creep'. Engineering Integrity, 25 (1). pp. 15 - 22. ISSN: 1365-4101 Open Access Link

Rees, DWA. (2007) 'Descriptions of reversed yielding in bending'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221 (9). pp. 981 - 991. ISSN: 0954-4062 Open Access Link

Rees, DWA., Garner, AF. and Dix, S. (2007) 'Creep behaviour in fibre-reinforced polymer mat composites'. Engineering Integrity, 23 (1). pp. 6 - 13. ISSN: 1365-4101 Open Access Link

Rees, DWA. (2006) 'Forming properties of four high-strength sheet steels'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220 (11). pp. 1815 - 1825. ISSN: 0954-4054

Rees, DWA. (2006) 'Basic engineering plasticity'. Butterworth-Heinemann. ISSN 10: 0750680253 ISSN 13: 9780750680257

Rees, DWA. (2006) 'Errors in the r value when based upon total strain measurements'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220 (6). pp. 989 - 996. ISSN: 0954-4054

Hu, CQ. and Rees, DWA. (2006) 'Simulation validation of advanced sheet metals under stretch forming'.SAE 2006 World Congress & Exhibition. Detroit, MI, USA. SAE International. pp. 0354. ISSN: 0148-7191

Rees, DWA. (2004) 'Autofrettage of thick-walled pipe bends'. International Journal of Mechanical Sciences, 46 (11). pp. 1675 - 1696. ISSN: 0020-7403

Rees, DWA. (2003) 'Nutting creep in polymer composites'. Journal of Materials Processing Technology, 143-144 (1). pp. 164 - 170. ISSN: 0924-0136

Rees, DWA. (2003) 'Anisotropy in thin canning sheet metals'. Journal de Physique IV, 105. pp. 19 - 29. ISSN: 1155-4339

Rees, DWA. (2002) 'Nutting creep in mono- and bi-layer polymers'. Plastics, Rubber and Composites, 31 (8). pp. 350 - 358. ISSN: 1465-8011

Rees, DWA. (2001) 'Modelling of non-linear creep in bi-polymer composites'.9th International Conference on Creep and Fracture of Engineering Materials and Structures. Swansea, UK. 1 - 4 April. IOM COMMUNICATIONS LTD. pp. 353 - 362.

Rees, DWA. (2001) 'Factors influencing the FLD of automotive sheet metal'. Journal of Materials Processing Technology, 118 (1-3). pp. 1 - 8. ISSN: 0924-0136

Rees, DWA. (2001) 'A bi-axial pole strain transducer device'. Measurement Science and Technology, 12 (1). pp. 97 - 102. ISSN: 0957-0233

Rees, DWA. (2001) 'Influences of rolling reduction on sheet metal formability'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (6). pp. 887 - 895. ISSN: 0954-4054

Rees, DWA. (2000) 'Mechanics of solids and structures'. Imperial College Press. ISSN 10: 1860942180 ISSN 13: 9781860942181

Rees, DWA. (2000) 'High temperature creep-fatigue in stainless steel', in Miannay, D., Costa, P., Francois, D. and Pineau, A. (eds.) Advances in Mechanical Behaviour, Plasticity and Damage: Proceedings of EUROMAT 2000. ELSEVIER SCIENCE BV. pp. 1315 - 1320. ISBN 10: 0-08-042815-0.

Rees, DWA. (2000) 'Rim and pole failures from elliptical bulging of oriented orthotropic sheet metal'. The Journal of Strain Analysis for Engineering Design, 35 (2). pp. 109 - 123. ISSN: 0309-3247

Rees, DWA. and Clayton, A. (1999) 'Creep and recovery in bi-polymer composites'.5th International Conference on Flow Processes in Composite Materials. Plymouth, UK. 12 - 14 July. ADVANCED COMPOSITES MANUFACTURING CENTRE. pp. 171 - 178.

Rees, DWA. and Au, YHJ. (1999) 'Deformation and fracture of a particulate MMC under nonradial combined loadings'.Symposium on Multiaxial Fatigue and Deformation: Testing and Prediction. Seattle, Washington. 19 - 20 May. ASTM International. pp. 54 - 81. ISSN: 0066-0558

Rees, DWA. (1999) 'Limiting formability of orthotropic sheet metal'.1st International Conference on Component Optimisations- from Material Properties and Simulation Software (COMPASS 1999). Swansea, UK. 29 - 1 April. ENGINEERING MATERIALS ADVISORY SERVICES LTD. pp. 97 - 104.

Rees, DWA. (1999) 'Pole instability theory for ellipsoidal bulging of rolled sheet'. Journal of Materials Processing Technology, 92 (93). pp. 508 - 517. ISSN: 0924-0136

Rees, DWA. (1999) 'Elastic-plastic stresses in rotating discs by von Mises and Tresca'. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 79 (4). pp. 281 - 288. ISSN: 0044-2267 Open Access Link

Rees, DWA. (1998) 'Interactions between time and cyclic deformation processes in a nimonic alloy'. Fatigue and Fracture of Engineering Materials and Structures, 21 (3). pp. 315 - 331. ISSN: 8756-758X

Rees, DWA. (1998) 'Deformation and fracture of metal matrix particulate composites under combined loadings'. Composites Part A: Applied Science and Manufacturing, 29 (1-2). pp. 171 - 182. ISSN: 1359-835X

Rees, DWA. (1998) 'Cyclic plasticity, creep and fracture in a Nimonic alloy'. The Journal of Strain Analysis for Engineering Design, 33 (6). pp. 419 - 435. ISSN: 0309-3247

Rees, DWA. and Power, RK. (1998) 'Process signatures and finite elements in sheet metal forming'. Journal of Materials Processing Technology, 77 (1-3). pp. 134 - 144. ISSN: 0924-0136

Hancox, J. and Rees, DWA. (1997) 'Floating horn airbag module optimization'.Autotech Congress - Automotive Vehicle Technologies (Autotech 97). Birmingham, UK. 4 - 6 November. MECHANICAL ENGINEERING PUBL. pp. 79 - 88. ISSN: 1357-9193

Rees, DWA. (1997) 'Basic solid mechanics'. Macmillan. ISSN 10: 0333666097 ISSN 13: 9780333666098

Middleton, RH., Saxon, MD., Phillips, G., Frost, M., Griffiths, BJ., Rees, D. and Esat, I. et al. (1997) 'Introduction of an holistic design approach through a teaching company scheme'.IEE 5th International Conference on Factory 2000 - The Technology Exploitation Process. Cambridge. 2 - 4 April. IEE. pp. 278 - 283. ISSN: 0537-9989 Open Access Link

Rees, DWA. (1997) 'Instability analysis for ellipsoidal bulging of sheet metal', in Predeleanu, M. and Gilormini, P. (eds.) Advanced Methods in Materials Processing Defects. Elsevier. , 45. pp. 235 - 244. ISBN 10: 0-444-82670-X.

Rees, DWA. and Power, RK. (1997) 'Orientation and formability of orthotropic sheet metals'. The Journal of Strain Analysis for Engineering Design, 32 (1). pp. 61 - 81. ISSN: 0309-3247

Rees, DWA. (1997) 'A tensor function for the R-value of sheet metal'. Applied Mathematical Modelling, 21 (9). pp. 579 - 590. ISSN: 0307-904X

Rees, DWA. (1996) 'Sheet orientation and forming limits under diffuse necking'. Applied Mathematical Modelling, 20 (8). pp. 624 - 635. ISSN: 0307-904X

Rees, DWA. and Liddiard, M. (1996) 'Elasticity and flow behaviour of a metal matrix composite'. Key Engineering Materials: Frontiers for Engineering Materials, 118-119 (118-119). pp. 179 - 185. ISSN: 1662-9795

Stolworthy, CIM. and Rees, DWA. (1995) 'Macroscopic characterisation of failure in composites materials'. Key Engineering Materials: Advances in Engineering Materials, 99-100. pp. 43 - 50. ISSN: 1662-9795

Rees, DWA. (1995) 'Plastic flow in the elliptical bulge test'. International Journal of Mechanical Sciences,, 37 (4). pp. 373 - 389. ISSN: 0020-7403

Rees, DWA. and Li, RKY. (1995) 'Invariant polynomials for composite strength'. Key Engineering Materials: Advances in Engineering Materials, 99-100. pp. 51 - 56. ISSN: 1662-9795

Rees, DWA. (1995) 'Tensile flow and instability in galvanized, rolled steel sheet'. The Journal of Strain Analysis for Engineering Design, 30 (4). pp. 305 - 315. ISSN: 0309-3247

Rees, DWA. (1995) 'Instability limits to the forming of sheet metals'. Journal of Materials Processing Technology, 55 (3). pp. 146 - 153. ISSN: 0924-0136

Rees, DWA. (1994) 'Equivalence and instability correlations for isotropic and anisotropic sheet plasticity'. Journal of Materials Processing Technology, 40 (1-2). pp. 173 - 194. ISSN: 0924-0136

Rees, DWA. and Power, RK. (1994) 'Forming limits in a clad steel'. Journal of Materials Processing Technology, 45 (1-4). pp. 571 - 575. ISSN: 0924-0136