Reid, SR., Aleyaasin, M. and Wang, B. (2012) 'Out-of-plane pipe whip for a bent cantilever pipe: Comparison between experiment and FEM models'. Journal of Applied Mechanics, 79 (1). ISSN: 0021-8936

Liu, Y., Wu, HX., Zhang, XC. and Wang, B. (2011) 'The influence of lattice structure on the dynamic performance of metal hollow sphere agglomerates'. Mechanics Research Communications, 38 (8). pp. 569 - 573. ISSN: 0093-6413

Chizari, M., Snow, M. and Wang, B. (2011) 'Post-operative assessment of an implant fixation in anterior cruciate ligament reconstructive surgery'. Journal of Medical Systems, 35 (5). pp. 941 - 947. ISSN: 0148-5598

Reid, SR., Wang, B. and Aleyaasin, M. (2011) 'Structural modelling and testing of failed high energy pipe runs: 2D and 3D pipe whip'. International Journal of Pressure Vessels and Piping, 88 (5-7). pp. 189 - 197. ISSN: 0308-0161 Open Access Link

Iqbal, N., Xue, P., Liao, HJ., Wang, B. and Li, YL. (2011) 'Material characterization of porous bronze at high strain rates'. Materials Science and Engineering A, 528 (13-14). pp. 4408 - 4412. ISSN: 0921-5093

Cheung, W., Mahmud, J., Evans, S., Holt, C., Wang, B. and Chizari, M. (2011) 'Mechanical assessment of 2 different methods of tripling hamstring tendons when using suspensory fixation'. Knee Surgery, Sports Traumatology, Arthroscopy, Online Paper (2). pp. 262 - 267. ISSN: 0942-2056

Xu, C., Xu, F., Wang, B. and Lu, T. (2011) 'Electrospinning of Poly(ethylene-co-vinyl alcohol) Nanofibres Encapsulated with Ag Nanoparticles for Skin Wound Healing'. Journal of Nanomaterials, 2011. pp. 1 - 7. ISSN: 1687-4129 Open Access Link

Xue, P., Iqbal, N., Liao, HJ., Wang, B. and Li, YL. (2011) 'Experimental study, on strain rate sensitivity of ductile porous irons'. International Journal of Impact Engineering, 48. pp. 82 - 86. ISSN: 0734-743X

Hussin, M. and Wang, B. (2010) 'Industrial safety perception among post-graduate engineering students'. Knowledge-Based Systems, 2 (8). pp. 769 - 711. ISSN: 0950-7051

Zhang, XC., Liu, Y., Wang, B. and Zhang, ZM. (2010) 'Effects of defects on the in-plane dynamic crushing of metal honeycombs'. International Journal of Mechanical Sciences, 52 (10). pp. 1290 - 1298. ISSN: 0020-7403

Chizari, M., Wang, B., Barrett, M. and Snow, M. (2010) 'Biomechanical testing procedures in tendon craft reconstruction surgery'. Biomedical Engineering: Applications, Basis and Communications, 22 (5). pp. 427 - 436. ISSN: 1016-2356

Chirazi, M., Wang, B., Snow, M. and Barrett, M. (2010) 'Mechanical aspects of a single-bundled tibial interference screw fixation in a tendon graft ACL reconstruction'. Biomedical Engineering: Applications, Basis and Communications, 22 (4). pp. 271 - 278. ISSN: 1016-2356

Li, B., Wang, B. and Reid, SR. (2010) 'Effective elastic properties of randomly distributed void models for porous materials'. International Journal of Mechanical Sciences, 52 (5). pp. 726 - 732. ISSN: 0020-7403 Open Access Link

Wang, B., Lu, G. and Reid, S. (2010) 'Special issue in honour of Professor Tongxi Yu'. International Journal of Mechanical Sciences, 52 (5). pp. 635 - 635. ISSN: 0020-7403

Chizari, M., Snow, M. and Wang, B. (2010) 'Post-Operative Assessment of an Implant Fixation in Anterior Cruciate Ligament Reconstructive Surgery'. Journal of Medical Systems. pp. 1 - 7. ISSN: 0148-5598

Cheung, W., Mahmud, J., Evans, S., Holt, C., Snow, M. and Wang, B. (2010) 'Evaluating the mechanical properties of a tendon graft, using digital image correlation technique'. Journal of Biomechanics, 42 (Supplement 1).

Chizari, M., Wang, B. and Snow, M. (2009) 'Effect of suturing of a tendon graft in ACL reconstruction'. Engineering Letters, 17 (3). pp. 205 - 208. ISSN: 1816-093X Open Access Link

Chizari, M., Snow, M. and Wang, B. (2009) 'Post-operative analysis of ACL tibial fixation'. Knee Surgery, Sports Traumatology, Arthroscopy, 17 (7). pp. 730 - 736. ISSN: 0942-2056

Chizari, M. and Wang, B. (2009) 'Estimating material property and failure of a living cell; Numerical study'. International Journal of Applied Mechanics and Engineering, 1 (2). pp. 339 - 347. ISSN: 1758-8251

Xu, LM., Li, C., Fan, H. and Wang, B. (2008) 'Elastic property prediction by finite element analysis with random distribution of materials for tungsten/silver composite'. Journal of Materials Science, 43 (17). pp. 5804 - 5808. ISSN: 0022-2461

Wang, B. and Zhang, E. (2008) 'On the compressive behaviour of sintered porous coppers with low to medium porosities, Part II: Preparation and microstructure'. International Journal of Mechanical Sciences, 50 (3). pp. 550 - 558. ISSN: 0020-7403

Wang, B. and Zhang, E. (2008) 'On the compressive behavior of sintered porous coppers with low-to-medium porosities-Part II: Preparation and microstructure'. International Journal of Mechanical Sciences, 50 (3). pp. 550 - 558. ISSN: 0020-7403

Ruan, D., Lu, G., Ong, LS. and Wang, B. (2007) 'Triaxial compression of aluminium foams'. Composites Science and Technology, 67 (6). pp. 1218 - 1234. ISSN: 0266-3538

Taggart, MJ., Blanks, A., Kharche, S., Holden, A., Wang, B. and Zhang, H. (2007) 'Towards understanding the myometrial physiome: approaches for the construction of a virtual physiological uterus'. BMC Pregnancy and Childbirth, 7 Suppl 1 (SUPPL. 1). pp. S3 - S3. ISSN: 1471-2393 Open Access Link

Wang, B., Zheng, J. and Lu, G. (2006) 'Dynamic strength and strain rate sensitivity of 37 wt% Pb 63 wt% Sn eutectic solders'.8th Electronics Packaging Technology Conference. Singapore, SINGAPORE. 6 - 8 December. IEEE. pp. 694 - 700.

Wang, B., Zheng, J. and Shu, D. (2006) 'Dynamic strength and strain rate sensitivity of 37 wt% Pb 63 wt% Sn eutectic solders'.6th Asia-Pacific Symposium on Engineering Plasticity and its Applications (AEPA2002). UNIV SYDNEY, SYDNEY, AUSTRALIA. 6 - 8 December. Trans Tech Publications. pp. 181 - 186. ISSN: 1013-9826

Wang, B. and Lu, G. (2006) 'Finite element analysis on the stress and fracture in the second metatarsal'. Key Engineering Materials, 312. pp. 275 - 280. ISSN: 1013-9826

Wang, B. and Lu, G. (2006) 'Dynamic strength of steel welds under high strain rate loading'.International Symposium on Macro-, Meso-, and Nano-Mechanics of Materials (MM2003). Hong Kong, PEOPLES R CHINA. 1 - 10 December. Trans Tech Publications. pp. 87 - 92. ISSN: 1022-6680

Zhang, E. and Wang, B. (2005) 'On the compressive behaviour of sintered porous coppers with low to medium porosities - Part I: Experimental study'. International Journal of Mechanical Sciences, 47 (4-5 SPEC. ISS.). pp. 744 - 756. ISSN: 0020-7403

Wang, B., Zhang, J. and Lu, G. (2003) 'Taylor impact test for ductile porous materials - Part 2: Experiments'. International Journal of Impact Engineering, 28 (5). pp. 499 - 511. ISSN: 0734-743X

Ruan, D., Lu, G., Wang, B. and Yu, TX. (2003) 'In-plane dynamic crushing of honeycombs - A finite element study'. International Journal of Impact Engineering, 28 (2). pp. 161 - 182. ISSN: 0734-743X

Wang, B. and Lu, G. (2002) 'Crash analysis of automobile bumpers with pedestrians'.3rd International Conference on Advances in Steel Structures. HONG KONG, PEOPLES R CHINA. 9 - 11 December. ELSEVIER SCIENCE BV. pp. 939 - 946.

Wang, B., Zheng, J. and Lu, G. (2002) 'Rubbing contact between rotating blade and casing plate. Part 1 - Experimental study'.6th Asia-Pacific Symposium on Engineering Plasticity and its Applications (AEPA2002). UNIV SYDNEY, SYDNEY, AUSTRALIA. 2 - 6 December. Trans Tech Publications. pp. 725 - 730. ISSN: 1013-9826

Wang, B., Song, J. and Kang, Y. (2002) 'On modelling of biodegradable foams for packaging applications'. Key Engineering Materials, 227. pp. 253 - 260. ISSN: 1013-9826

Wang, B. and Shu, D. (2002) 'Experimental investigation on the viscoelastic properties of porous metals'.9th International Conference on Metal Forming (METAL FORMING 2002. UNIV BRIMINGHAM, BIRMINGHAM, ENGLAND. 9 - 11 September. Elsevier BV. pp. 144 - 149. ISSN: 0924-0136

Zhang, E., Zeng, S. and Wang, B. (2002) 'Preparation and microstructure of in situ particle reinforced titanium matrix alloy'.9th International Conference on Metal Forming (METAL FORMING 2002. UNIV BRIMINGHAM, BIRMINGHAM, ENGLAND. 9 - 11 September. Elsevier BV. pp. 103 - 109. ISSN: 0924-0136

Wang, B. and Yi, S. (2002) 'Dynamic plastic behavior of 63 wt% Sn 37 wt% Pb eutectic solder under high strain rates'. Journal of Materials Science Letters, 21 (9). pp. 697 - 698. ISSN: 0261-8028

Fan, H., Wang, B. and Lu, G. (2002) 'On the tearing energy of a ductile thin plate'. International Journal of Mechanical Sciences, 44 (2). pp. 407 - 421. ISSN: 0020-7403

Wang, B. and Lu, G. (2002) 'Mushrooming of circular tubes under dynamic axial loading'. Thin-Walled Structures, 40 (2). pp. 167 - 182. ISSN: 0263-8231

Huang, X., Wang, B., Lu, G. and Yu, TX. (2002) 'Large deflection of elastoplastic, non-linear strain-hardening cantilevers'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 216 (4). pp. 433 - 445. ISSN: 0954-4062

Lu, G., Wang, B. and Zhang, T. (2001) 'Taylor impact test for ductile porous materials - Part 1: Theory'. International Journal of Impact Engineering, 25 (10). pp. 981 - 991. ISSN: 0734-743X

Song, JH., Kang, YG. and Wang, B. (2001) 'Rapid prototyping and tooling for moulded pulp packaging'.17th National Conference on Manufacturing Research. CARDIFF UNIV, CARDIFF, WALES. 4 - 6 September. PROFESSIONAL ENGINEERING PUBLISHING LTD. pp. 193 - 198.

Wang, B., Klepaczko, JR., Lu, G. and Kong, LX. (2001) 'Viscoplastic behaviour of porous bronzes and irons'.5th Asia-Pacific Conference on Materials Processing. SEOUL, SOUTH KOREA. 25 - 27 June. Elsevier BV. pp. 574 - 580. ISSN: 0924-0136

Kong, LX., Wang, B. and Hodgson, PD. (2001) 'Prediction of stress-strain behaviors in steels using an integrated constitutive, FEM and ANN model'. ISIJ International, 41 (7). pp. 795 - 800. ISSN: 0915-1559

She, FH., Chow, S., Wang, B. and Kong, LX. (2001) 'Identification and Classification of Animal Fibres Using Artificial Neural Networks'. Journal of textile engineering, 47 (2). pp. 35 - 38. ISSN: 0040-5043

Wang, B. and Yang, M. (2000) 'Damping of honeycomb sandwich beams'. Journal of Materials Processing Technology, 105 (1). pp. 67 - 72. ISSN: 0924-0136

Wang, B. and Yang, M. (2000) 'Damping of honeycomb sandwich beams'. Journal of Materials Processing Technology, 105 (1-2). pp. 67 - 72. ISSN: 0924-0136

Wang, B. and Zheng, J. (2000) 'Dynamic buckling of a column with adhesive bonds'.5th Asia-Pacific Symposium on Advances in Engineering Plasticity and Its Applications (AEPA 2000). HONG KONG, PEOPLES R CHINA. 12 - 16 June. Trans Tech Publications. pp. 703 - 708. ISSN: 1013-9826

Ma, X., Kong, LX., Barnett, MR. and Wang, B. (2000) 'FEM simulation of torsion tests for pre-deformed lead with work-softening'.5th Asia-Pacific Symposium on Advances in Engineering Plasticity and Its Applications (AEPA 2000). HONG KONG, PEOPLES R CHINA. 12 - 16 June. Trans Tech Publications. pp. 407 - 412. ISSN: 1013-9826

Zhang, J., Lu, G., Wang, B. and Zhang, TG. (2000) 'Dynamic yield stresses of porous materials made of bronze and iron'.5th Asia-Pacific Symposium on Advances in Engineering Plasticity and Its Applications (AEPA 2000). HONG KONG, PEOPLES R CHINA. 12 - 16 June. Trans Tech Publications. pp. 249 - 254. ISSN: 1013-9826