Mahmoud, MM. and Karayiannis, TG. (2015) 'Flow pattern transition models and correlations for flow boiling in mini-tubes'. Experimental Thermal and Fluid Science, 70. pp. 270 - 282. ISSN: 0894-1777 Open Access Link

Ferhati, A., Karayiannis, TG., Lewis, JS., McGlen, RJ. and Reay, DA. (2015) 'Single-Phase Laminar Flow Heat Transfer From Confined Electron Beam Enhanced Surfaces'. Heat Transfer Engineering, 36 (14-15). pp. 1165 - 1176. ISSN: 0145-7632 Open Access Link

Ahmad, SW., Lewis, JS., McGlen, RJ. and Karayiannis, TG. (2014) 'Pool boiling on modified surfaces using R-123'. Heat Transfer Engineering, 35 (16-17). pp. 1491 - 1503. ISSN: 0145-7632 Open Access Link

Sanna, A., Hutter, C., Kenning, DBR., Karayiannis, TG., Sefiane, K. and Nelson, RA. (2014) 'Numerical investigation of nucleate boiling heat transfer on thin substrates'. International Journal of Heat and Mass Transfer, 76. pp. 45 - 64. ISSN: 0017-9310 Open Access Link

Mumith, J-A., Makatsoris, C. and Karayiannis, TG. (2014) 'Design of a thermoacoustic heat engine for low temperature waste heat recovery in food manufacturing: A thermoacoustic device for heat recovery'. Applied Thermal Engineering, 65 (1-2). pp. 588 - 596. ISSN: 1359-4311 Open Access Link

Karayiannis, TG. and Lewis, JS. (2014) 'Selected papers from the third micro and nano flows conference'. Heat Transfer Engineering, 35 (2). pp. 123 - 124. ISSN: 0145-7632

Pike-Wilson, EA. and Karayiannis, TG. (2014) 'Flow boiling of R245fa in 1.1mm diameter stainless steel, brass and copper tubes'. Experimental Thermal and Fluid Science, 59. pp. 166 - 183. ISSN: 0894-1777 Open Access Link

Pike-Wilson, EA., Mahmoud, MM. and Karayiannis, TG. (2013) 'Flow boiling of R134A and R245FA in a 1.1 MM diameter tube'. ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013.

Hutter, C., Sanna, A., Karayiannis, TG., Kenning, DBR., Nelson, RA., Sefiane, K. and Walton, AJ. et al. (2013) 'Vertical coalescence during nucleate boiling from a single artificial cavity'. Experimental Thermal and Fluid Science, 51. pp. 94 - 102. ISSN: 0894-1777

Lewis, JS. and Karayiannis, TG. (2013) 'Special issue: 3rd Micro and Nano Flows Conference'. Applied Thermal Engineering, 59 (1-2). pp. 695. ISSN: 1359-4311

Aleknaviciute, I., Karayiannis, TG., Collins, MW. and Xanthos, C. (2013) 'Methane decomposition under a corona discharge to generate COx-free hydrogen'. Energy, 59. pp. 432 - 439. ISSN: 0360-5442

Aleknaviciute, I., Karayiannis, TG., Collins, MW. and Xanthos, C. (2013) 'Plasma-assisted decomposition of gaseous propane to produce COx free hydrogen'. International Journal of Low-Carbon Technologies, 8 (3). pp. 197 - 202. ISSN: 1748-1317

Wu, H., Tassou, SA., Karayiannis, TG. and Jouhara, H. (2013) 'Analysis and simulation of continuous food frying processes'. Applied Thermal Engineering, 53 (2). pp. 332 - 339. ISSN: 1359-4311 Open Access Link

Wu, H., Karayiannis, TG. and Tassou, SA. (2013) 'A two-dimensional frying model for the investigation and optimisation of continuous industrial frying systems'. Applied Thermal Engineering, 51 (1-2). pp. 926 - 936. ISSN: 1359-4311 Open Access Link

Wu, H., Tassou, SA. and Karayiannis, TG. (2013) 'Modelling and control approaches for energy reduction in continuous frying systems'. Applied Energy, 112. pp. 939 - 948. ISSN: 0306-2619

Hutter, C., Sefiane, K., Karayiannis, TG., Walton, AJ., Nelson, RA. and Kenning, DBR. (2012) 'Nucleation site interaction between artificial cavities during nucleate pool boiling on silicon with integrated micro-heater and temperature micro-sensors'. International Journal of Heat and Mass Transfer, 55 (11-12). pp. 2769 - 2778. ISSN: 0017-9310

Mirmanto., Kenning, DBR., Lewis, JS. and Karayiannis, TG. (2012) 'Pressure drop and heat transfer characteristics for single-phase developing flow of water in rectangular microchannels'. Journal of Physics: Conference Series, 395 (1). pp. 012085 - 012085. ISSN: 1742-6588

Karayiannis, LG., Mahmoud, MM. and Kenning, DBR. (2012) 'A study of discrepancies in flow boiling results in small to microdiameter metallic tubes'. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 36. pp. 126 - 142. ISSN: 0894-1777

Karayiannis, TG., Mahmoud, MM. and Kenning, DBR. (2011) 'A study of discrepancies in flow boiling results in small to micro diameter metallic tubes'. ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2011, 2. pp. 543 - 563.

Karayiannis, TG., Collins, MW. and Sefiane, K. (2011) 'Selected papers from the second micro nano flows conference'. Heat Transfer Engineering, 32 (13-14). pp. 1099 - 1100. ISSN: 0145-7632

Ahmad, SW., Karayiannis, TG., Kenning, DBR. and Luke, A. (2011) 'Compound effect of EHD and surface roughness in pool boiling and CHF with R-123'. Applied Thermal Engineering, 31 (11-12). pp. 1994 - 2003. ISSN: 1359-4311 Open Access Link

Mahmoud, MM., Karayiannis, TG. and Kenning, DBR. (2011) 'Surface effects in flow boiling of R134a in microtubes'. International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3334 - 3346. ISSN: 0017-9310 Open Access Link

Lewis, J. and Karayiannis, TG. (2011) 'Special issue: 2nd micro and nano flows conference'. Applied Thermal Engineering, 31 (5). pp. 593. ISSN: 1359-4311

Gedupudi, S., Zu, YQ., Karayiannis, TG., Kenning, DBR. and Yan, YY. (2011) 'Confined bubble growth during flow boiling in a mini/micro-channel of rectangular cross-section Part I: Experiments and 1-D modelling'. International Journal of Thermal Sciences, 50 (3). pp. 250 - 266. ISSN: 1290-0729

Zu, YQ., Yan, YY., Gedupudi, S., Karayiannis, TG. and Kenning, DBR. (2011) 'Confined bubble growth during flow boiling in a mini-/micro-channel of rectangular cross-section part II: Approximate 3-D numerical simulation'. International Journal of Thermal Sciences, 50 (3). pp. 267 - 273. ISSN: 1290-0729

Bogojevic, D., Sefiane, K., Walton, AJ., Lin, H., Cummins, G., Kenning, DBR. and Karayiannis, TG. et al. (2011) 'Experimental investigation of non-uniform heating effect on flow boiling instabilities in a microchannel-based heat sink'. International Journal of Thermal Sciences, 50 (3). pp. 309 - 324. ISSN: 1290-0729 Open Access Link

Wu, H., Jouhara, H., Tassou, SA. and Karayiannis, TG. (2011) 'Modelling of energy flows in potato crisp frying processes'. Applied Energy, 89 (1). pp. 81 - 88. ISSN: 0306-2619

Tesch, K., Collins, MW., Karayiannis, TG., Atherton, MA. and Edwards, P. (2011) 'Modelling of two-component turbulent mass and heat transfer in air-fed pressurised suits'. Flow, Turbulence and Combustion, 87 (1). pp. 55 - 77. ISSN: 1386-6184

Hutter, C., Kenning, DBR., Sefiane, K., Karayiannis, TG., Lin, H., Cummins, G. and Walton, AJ. et al. (2010) 'Experimental pool boiling investigations of FC-72 on silicon with artificial cavities and integrated temperature micro-sensors'. Experimental Thermal and Fluid Science, 34 (4). pp. 422 - 433. ISSN: 0894-1777

Karayiannis, TG., Shiferaw, D., Kenning, DBR. and Wadekar, VV. (2010) 'Flow patterns and heat transfer for flow boiling in small to micro diameter tubes'. Heat Transfer Engineering, 31 (4). pp. 257 - 275. ISSN: 0145-7632

Hutter, C., Kenning, DBR., Sefiane, K., Karayiannis, TG., Lin, H., Cummins, G. and Walton, AJ. et al. (2010) 'Experimental pool boiling investigations of FC-72 on silicon with artificial cavities and integrated temperature microsensors'. Experimental Thermal and Fluid Science, 34 (4). pp. 422 - 433. ISSN: 0894-1777

Jiang, X., Siamas, G., Jagus, K. and Karayiannis, TG. (2010) 'Physical modelling and advanced simulations of gas-liquid two-phase jet flows in atomization and sprays'. Journal of Progress in Energy and Combustion Science, 36 (2). pp. 131 - 167. ISSN: 0360-1285

Rosa, P., Karayiannis, TG. and Collins, WC. (2009) 'Single-phase heat transfer in microchannels: The importance of scaling effects.'. Applied Thermal Engineering, 29 (17-18). pp. 3447 - 3468. ISSN: 1359-4311

Tesch, K., Atherton, MA., Karayiannis, TG., Collins, MW. and Edwards, P. (2009) 'Determining heat transfer coefficients using evolutionary algorithms'. Journal of Engineering Optimisation, 41 (9). pp. 855 - 870. ISSN: 1029-0273 Open Access Link

Edwards, P., Tesch, K., Karayiannis, TG., Collins, MW., Atherton, MA., Young, P., Large, M. and Brade, R. et al. (2009) 'Design optimisation of air-fed full pressurised suits'. Fusion Engineering and Design, vol 84 (n. 2-6). pp. 716 - 721. ISSN: 0920-3796 Open Access Link

Sanna, A., Karayiannis, TG., Kenning, DBR., Hutter, C., Sefiane, K., Walton, AJ., Golobič, I., Pavlovič, E. and Nelson, RA. et al. (2009) 'Steps towards the development of an experimentally verified simulation of pool nucleate boiling on a silicon wafer with artificial sites'. Applied Thermal Engineering, 29 (7). pp. 1327 - 1337. ISSN: 1359-4311 Open Access Link

Tesch, K., Collins, MW., Karayiannis, TG., Atherton, MA. and Edwards, P. (2009) 'Heat and mass transfer in air-fed pressurised suits'. Applied Thermal Engineering, 29 (7). pp. 1375 - 1382. ISSN: 1359-4311 Open Access Link

Hristov, Y., Zhao, D., Kenning, DBR., Sefiane, K. and Karayiannis, TG. (2009) 'A study of nucleate boiling and critical heat flux with EHD enhancement'. Heat and Mass Transfer, 45 (7). pp. 999 - 1017. ISSN: 0947-7411 Open Access Link

Shiferaw, D., Karayiannis, TG. and Kenning, DBR. (2009) 'Flow boiling in a 1.1mm vertical tube with R134a: Experimental results and comparisons with model'. International Journal of Thermal Sciences, vol 48 (n. 2, February 2009). pp. 331 - 341. ISSN: 1290-0729

Gedupudi, S., Cummins, GP., Lin, H., Walton, AJ., Sefiane, K., Karayiannis, TG. and Kenning, DBR. et al. (2008) 'Fabrication of silicon microchannel with integrated heater and temperature sensors for flow boiling studies'.1st ASME Micro/Nanoscale Heat Transfer International Conference. Tainan, Taiwan. 6 - 9 June. ASME. pp. 747 - 753.

Shiferaw, D., Karayiannis, TG. and Kenning, DBR. (2008) 'Flow boiling in a 1.1 mm tube with R134a: Experimental results and comparison with model'. International Journal of Thermal Sciences, 48 (2). pp. 331 - 341. ISSN: 1290-0729 Open Access Link

Shiferaw, D., Karayiannis, TG. and Kenning, DBR. (2007) 'Examination of heat transfer correlations and a model for flow boiling of R134a in small diameter tubes'. International Journal of Heat and Mass Transfer, 50 (25-26). pp. 5177 - 5193. ISSN: 0017-9310 Open Access Link

Chen, L., Tian, YS. and Karayiannis, TG. (2006) 'The effect of tube diameter on vertical two-phase flow regimes in small tubes'. International Journal of Heat and Mass Transfer, 49 (21-22). pp. 4220 - 4230. ISSN: 0017-9310 Open Access Link

Kinnear, D., Atherton, M., Collins, M., Dokhan, J. and Karayiannis, T. (2006) 'Colour in visualisation for computational fluid dynamics'. Optics and Laser Technology, 38 (4-6). pp. 286 - 291. ISSN: 0030-3992 Open Access Link

Chen, L., Tian, YS. and Karayiannis, TG. (2006) 'The effect of tube diameter on vertical two-phase flow regimes in small tubes'. International Journal of Heat and Mass Transfer, 49 (21-22). pp. 4220 - 4230. ISSN: 0017-9310 Open Access Link

Lalzad, AK., Eames, IW., Maidments, G. and Karayiannis, TG. (2006) 'Modelling and experiments for a small-scale solar desalination plant'. International Journal of Low Carbon Technologies, 1 (2). pp. 149 - 166. ISSN: 1748-1317

Maidment, GG., Missenden, JF., Karayiannis, TG. and Wang, F. (2005) 'An investigation of a novel cooling system for chilled food display cabinets'. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (2). pp. 157 - 165. ISSN: 0954-4089

Chen, L., Tian, YS. and Karayiannis, TG. (2005) 'R134a flow patterns in small-diameter tubes'. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (2). pp. 167 - 181. ISSN: 0954-4089

Zhao, X., Collins, MW. and Karayiannis, TG. (2004) 'A numerical coupling method for moving boundary problems: Application in coriolis meters'. IASME Transactions, 1 (3). pp. 498 - 503. ISSN: 1790-031X

Al-Dadah, RK. and Karayiannis, TG. (2004) 'Optimised electrode design for EHD enhancement of boiling and condensation in shell and tube heat exchangers'. International Journal of Heat and Exchangers, V (1). pp. 29 - 50. ISSN: 1524-5608