Kogo, BE., Wang, B., Wrobel, LC. and Chizari, M. (2018) 'Microstructural analysis of a girth welded subsea pipe'. Engineering Letters, 26 (1). pp. 193 - 202. ISSN: 1816-093X Open Access Link

Zhang, D-P., Cheng, W-M. and Wang, B. (2017) 'Variational analysis of mid-span deflection of gantry cranes'. Journal of Central South University, 24 (11). pp. 2705 - 2716. ISSN: 2095-2899

Ren, Y., Cheng, W., Wang, Y. and Wang, B. (2017) 'Analysis of flexural behavior of a simple supported thin beam under concentrated multiloads using trigonometric series method'. Thin-Walled Structures, 120. pp. 124 - 137. ISSN: 0263-8231 Open Access Link

Ren, Y., Cheng, W., Wang, Y. and Wang, B. (2017) 'Analysis of the distortion of cantilever box girder with inner flexible diaphragms using initial parameter method'. Thin-Walled Structures, 117. pp. 140 - 154. ISSN: 0263-8231 Open Access Link

Romero, A., Soua, S., Gan, TH. and Wang, B. (2017) 'Condition monitoring of a wind turbine drive train based on its power dependant vibrations'. Renewable Energy, 123. pp. 817 - 827. ISSN: 0960-1481

Jiang, WZ., Liu, Y. and Wang, B. (2017) 'The plastic behavior of sandwich beams with core gradation'. International Journal of Mechanical Sciences, 130 (September 2017). pp. 19 - 30. ISSN: 0020-7403 Open Access Link

Jiang, WZ., Liu, Y. and Wang, B. (2017) 'Dynamic responses of metal sandwich beams under high velocity impact considering time inhomogeneity of core deformation'. International Journal of Impact Engineering, 110. pp. 311 - 323. ISSN: 0734-743X Open Access Link

Ren, Y., Cheng, W., Wang, Y., Chen, Q. and Wang, B. (2017) 'Distortional analysis of simply supported box girders with inner diaphragms considering shear deformation of diaphragms using initial parameter method'. Engineering Structures, 145. pp. 44 - 59. ISSN: 0141-0296 Open Access Link

Ren, Y., Paradowska, A., Wang, B., Eren, E. and Janin, Y. (2017) 'Residual Stress State of X65 Pipeline Girth Welds before and after Local and Furnace Post Weld Heat Treatment'. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 139 (4). pp. 041401-1 - 041401-8. ISSN: 0094-9930 Open Access Link

Yu, K. (2017) 'Challenges in the application of DCVG-survey to predict coating defect size on pipelines'. Materials and Corrosion, 68 (3). pp. 329 - 337. ISSN: 0947-5117 Open Access Link

Romero, A., Lage, Y., Soua, S., Wang, B. and Gan, TH. (2016) 'Vestas V90-3MW Wind Turbine Gearbox Health Assessment Using a Vibration-Based Condition Monitoring System'. Shock and Vibration, 2016. pp. 1 - 18. ISSN: 1070-9622 Open Access Link

Ren, YZ., Cheng, WM., Wu, X. and Wang, B. (2015) 'Torsional-Flexural Buckling of Unevenly Battened Columns under Eccentrical Compressive Loading'. Journal of Engineering Mechanics, 142 (1). pp. 04015066 - 04015066. ISSN: 0733-9399 Open Access Link

Bourga, R., Moore, P., Janin, Y-J., Wang, B. and Sharples, J. (2015) 'Leak-before-break: Global perspectives and procedures'. International Journal of Pressure Vessels and Piping, 129. pp. 43 - 49. ISSN: 0308-0161 Open Access Link

Saithna, A., Chizari, M., Morris, G., Anley, C., Wang, B. and Snow, M. (2015) 'An analysis of the biomechanics of interference screw fixation and sheathed devices for biceps tenodesis'. Clinical Biomechanics, 30 (6). pp. 551 - 557. ISSN: 0268-0033 Open Access Link

Butt, HSU., Xue, P., Jiang, TZ. and Wang, B. (2015) 'Parametric identification for material of viscoelastic SHPB from wave propagation data incorporating geometrical effects'. International Journal of Mechanical Sciences, 91. pp. 46 - 54. ISSN: 0020-7403

Wang, B. and Wiercigroch, M. (2015) 'Forward: Special issue in honour of professor Steve R. Reid FREng FRSE'. International Journal of Mechanical Sciences, 91. pp. 1 - 2. ISSN: 0020-7403

Wang, A., Xu, C., Zhang, C., Gan, Y. and Wang, B. (2015) 'Experimental Investigation of the Properties of Electrospun Nanofibers for Potential Medical Application'. Journal of Nanomaterials, 2015. pp. 1 - 8. ISSN: 1687-4110 Open Access Link

Kpenyigba, KM., Jankowiak, T., Rusinek, A., Pesci, R. and Wang, B. (2015) 'Effect of projectile nose shape on ballistic resistance of interstitial-free steel sheets'. International Journal of Impact Engineering, 79. pp. 83 - 94. ISSN: 0734-743X Open Access Link

Artigao, E., Ferrando, JL., Gan, TH., Wang, B., Kappatos, V., Selcuk, C. and Soua, S. et al. (2014) 'Development of a baseline as a novel strategy for a condition monitoring system for the assessment of wind turbine generators'. Insight: Non-Destructive Testing and Condition Monitoring, 56 (8). pp. 417 - 421. ISSN: 1354-2575

Iqbal, N., Xue, P., Wang, B. and Li, Y. (2014) 'On the high strain rate behavior of 63-37 Sn-Pb eutectic solders with temperature effects'. International Journal of Impact Engineering, 74. pp. 126 - 131. ISSN: 0734-743X Open Access Link

Wang, B., Wu, X., Gan, T-H. and Rusinek, A. (2014) 'Finite element modelling of atomic force microscope cantilever beams with uncertainty in material and dimensional parameters'. Engineering Transactions, 62 (4). pp. 403 - 421. ISSN: 0867-888X Open Access Link

Li, B., Wang, S., Wu, X. and Wang, B. (2014) 'Dynamic response of continuous beams with discrete viscoelastic supports under sinusoidal loading'. International Journal of Mechanical Sciences, 86. pp. 76 - 82. ISSN: 0020-7403 Open Access Link

Liu, Y., Wu, HX., Lu, G. and Wang, B. (2013) 'Dynamic properties of density graded thin-walled metal hollow sphere arrays'. Mechanics of Advanced Materials and Structures, 20 (6). pp. 478 - 488. ISSN: 1537-6494

Lu, X. and Wang, B. (2013) 'On the strength of angle-patterned sandwich cores under various loading conditions'. Key Engineering Materials, 535-536. pp. 413 - 417. ISSN: 1013-9826

Wang, B., Chao, X., Li, Y. and Reid, SR. (2013) 'Tensile strength of electrospun Poly(ethylene-co-vinyl alcohol) nanofibre sheets'. Key Engineering Materials, 535-536. pp. 215 - 218. ISSN: 1013-9826

Xue, P., Iqbal, N., Liao, HJ., Wang, B. and Li, YL. (2012) 'Experimental study, on strain rate sensitivity of ductile porous irons'. International Journal of Impact Engineering, 48. pp. 82 - 86. ISSN: 0734-743X

Wang, B., Deshpande, VS. and Langseth, M. (2012) 'Special issue on advances in impact mechanics in honour of Professor Steve Reid'. International Journal of Impact Engineering, 48. pp. 1 - 1. ISSN: 0734-743X

Hussin, MF., Wang, B. and Hipnie, R. (2012) 'The reliability and validity of Basic Offshore Safety and Emergency Training knowledge test'. Journal of King Saud University - Engineering Sciences, 24 (2). pp. 95 - 105. ISSN: 1018-3639

Reid, SR., Aleyaasin, M. and Wang, B. (2012) 'Out-of-plane pipe whip for a bent cantilever pipe: Comparison between experiment and FEM models'. Journal of Applied Mechanics, 79 (1). ISSN: 0021-8936

Chizari, M., Snow, M., Cheung, W., Mahmud, J. and Wang, B. (2012) 'Relative motion of tendon limbs in a loop tendon graft'. Biomedical Engineering: Applications, Basis and Communications, 24 (5). pp. 447 - 451. ISSN: 1016-2372

Liu, Y., Wu, HX., Zhang, XC. and Wang, B. (2011) 'The influence of lattice structure on the dynamic performance of metal hollow sphere agglomerates'. Mechanics Research Communications, 38 (8). pp. 569 - 573. ISSN: 0093-6413

Chizari, M., Snow, M. and Wang, B. (2011) 'Post-operative assessment of an implant fixation in anterior cruciate ligament reconstructive surgery'. Journal of Medical Systems, 35 (5). pp. 941 - 947. ISSN: 0148-5598

Reid, SR., Wang, B. and Aleyaasin, M. (2011) 'Structural modelling and testing of failed high energy pipe runs: 2D and 3D pipe whip'. International Journal of Pressure Vessels and Piping, 88 (5-7). pp. 189 - 197. ISSN: 0308-0161 Open Access Link

Iqbal, N., Xue, P., Liao, HJ., Wang, B. and Li, YL. (2011) 'Material characterization of porous bronze at high strain rates'. Materials Science and Engineering A, 528 (13-14). pp. 4408 - 4412. ISSN: 0921-5093

Xue, P., Iqbal, N., Liao, HJ., Wang, B. and Li, YL. (2011) 'Experimental study, on strain rate sensitivity of ductile porous irons'. International Journal of Impact Engineering, 48. pp. 82 - 86. ISSN: 0734-743X

Xu, C., Xu, F., Wang, B. and Lu, T. (2011) 'Electrospinning of Poly(ethylene-co-vinyl alcohol) Nanofibres Encapsulated with Ag Nanoparticles for Skin Wound Healing'. Journal of Nanomaterials, 2011. pp. 1 - 7. ISSN: 1687-4129 Open Access Link

Cheung, W., Mahmud, J., Evans, S., Holt, C., Wang, B. and Chizari, M. (2011) 'Mechanical assessment of 2 different methods of tripling hamstring tendons when using suspensory fixation'. Knee Surgery, Sports Traumatology, Arthroscopy, Online Paper (2). pp. 262 - 267. ISSN: 0942-2056

Hussin, M. and Wang, B. (2010) 'Industrial safety perception among post-graduate engineering students'. Knowledge-Based Systems, 2 (8). pp. 769 - 711. ISSN: 0950-7051

Chizari, M., Wang, B., Barrett, M. and Snow, M. (2010) 'Biomechanical testing procedures in tendon craft reconstruction surgery'. Biomedical Engineering: Applications, Basis and Communications, 22 (5). pp. 427 - 436. ISSN: 1016-2356

Zhang, XC., Liu, Y., Wang, B. and Zhang, ZM. (2010) 'Effects of defects on the in-plane dynamic crushing of metal honeycombs'. International Journal of Mechanical Sciences, 52 (10). pp. 1290 - 1298. ISSN: 0020-7403

Chirazi, M., Wang, B., Snow, M. and Barrett, M. (2010) 'Mechanical aspects of a single-bundled tibial interference screw fixation in a tendon graft ACL reconstruction'. Biomedical Engineering: Applications, Basis and Communications, 22 (4). pp. 271 - 278. ISSN: 1016-2356

Li, B., Wang, B. and Reid, SR. (2010) 'Effective elastic properties of randomly distributed void models for porous materials'. International Journal of Mechanical Sciences, 52 (5). pp. 726 - 732. ISSN: 0020-7403 Open Access Link

Wang, B., Lu, G. and Reid, S. (2010) 'Special issue in honour of Professor Tongxi Yu'. International Journal of Mechanical Sciences, 52 (5). pp. 635 - 635. ISSN: 0020-7403

Chizari, M., Snow, M. and Wang, B. (2010) 'Post-Operative Assessment of an Implant Fixation in Anterior Cruciate Ligament Reconstructive Surgery'. Journal of Medical Systems. pp. 1 - 7. ISSN: 0148-5598

Cheung, W., Mahmud, J., Evans, S., Holt, C., Snow, M. and Wang, B. (2010) 'Evaluating the mechanical properties of a tendon graft, using digital image correlation technique'. Journal of Biomechanics, 42 (Supplement 1).

Chizari, M., Wang, B. and Snow, M. (2009) 'Effect of suturing of a tendon graft in ACL reconstruction'. Engineering Letters, 17 (3). pp. 205 - 208. ISSN: 1816-093X Open Access Link

Chizari, M., Snow, M. and Wang, B. (2009) 'Post-operative analysis of ACL tibial fixation'. Knee Surgery, Sports Traumatology, Arthroscopy, 17 (7). pp. 730 - 736. ISSN: 0942-2056

Chizari, M. and Wang, B. (2009) 'Estimating material property and failure of a living cell; Numerical study'. International Journal of Applied Mechanics and Engineering, 1 (2). pp. 339 - 347. ISSN: 1758-8251

Xu, LM., Li, C., Fan, H. and Wang, B. (2008) 'Elastic property prediction by finite element analysis with random distribution of materials for tungsten/silver composite'. Journal of Materials Science, 43 (17). pp. 5804 - 5808. ISSN: 0022-2461

Wang, B. and Zhang, E. (2008) 'On the compressive behaviour of sintered porous coppers with low to medium porosities, Part II: Preparation and microstructure'. International Journal of Mechanical Sciences, 50 (3). pp. 550 - 558. ISSN: 0020-7403

Wang, B. and Zhang, E. (2008) 'On the compressive behavior of sintered porous coppers with low-to-medium porosities-Part II: Preparation and microstructure'. International Journal of Mechanical Sciences, 50 (3). pp. 550 - 558. ISSN: 0020-7403