BCC
Gaitanelis, D., Worrall, C. and Kazilas, M. (2024) 'Influence of rapid high-temperature processing on the interface of CF/PEEK, a quick and effective method for enhancing the IFSS'. Composites Science and Technology, 251. pp. 110564 - 110564. ISSN: 0266-3538
Gaitanelis, D., Worrall, C. and Kazilas, M. (2024) 'A numerical model to prevent the thermal degradation of CFRPs at extreme heating rates – The laser processing of CF/PEEK'. Composites Part A: Applied Science and Manufacturing, 177. pp. 107938 - 107938. ISSN: 1359-835X
Paul, D., Varshney, A., Mahajan, P. and Mishnaevsky, L. (2023) 'Post-repair residual stresses and microstructural defects in wind turbine blades: Computational modelling'. International Journal of Adhesion and Adhesives, 123. pp. 1 - 14. ISSN: 0143-7496
Gaitanelis, D., Chanteli, A., Worrall, C., Weaver, PM. and Kazilas, M. (2023) 'A multi-technique and multi-scale analysis of the thermal degradation of PEEK in laser heating'. Polymer Degradation and Stability, 211. pp. 1 - 12. ISSN: 0141-3910 Open Access Link
Paul, D., Velmurugan, R. and Gupta, NK. (2023) 'Drop weight impact analysis of GFRP tubes with hollow glass particle-filled matrix'. Defence Technology, 29. pp. 1 - 9. ISSN: 2096-3459 Open Access Link
Alizadeh, E., Omairey, S. and Zysset, P. (2023) 'Investigating the post-yield behavior of mineralized bone fibril arrays using a 3D non-linear finite element unit-cell model'. Journal of the Mechanical Behavior of Biomedical Materials, 138. pp. 1 - 14. ISSN: 1751-6161 Open Access Link
Zitoun, A., Dixon, S., Kazilas, M. and Hutchins, D. (2023) 'Defect Detection and Imaging in Composite Structures Using Magnetostrictive Patch Transducers'. Sensors, 23 (2). pp. 1 - 16. ISSN: 1424-8220 Open Access Link
Fong, E., Koponen, K., Omairey, S. and Dunning, P. (2023) 'Thermal–mechanical metamaterial analysis and optimization using an Abaqus plugin'. Engineering with Computers, 40 (2). pp. 1145 - 1155. ISSN: 0177-0667
Orlova, DA., Panchenko, AY., Omairey, SL. and Berinskii, IE. (2022) 'Computational homogenization of bio-inspired metamaterial with a random fiber network microstructure'. Mechanics Research Communications, 124. pp. 103930 - 103930. ISSN: 0093-6413
Gaitanelis, D., Worrall, C. and Kazilas, M. (2022) 'Detecting, characterising and assessing PEEK’s and CF-PEEK’s thermal degradation in rapid high-temperature processing'. Polymer Degradation and Stability, 204. pp. 1 - 14. ISSN: 0141-3910 Open Access Link
Bahrami, F., Omairey, S., Bone, G., Matthews, M., Worrall, C., Sampethai, S., et al. (2022) 'Polymer coating material for innovative reversible dissimilar composite-metal joining for automotive applications'.20th European Conference on Composite Materials - Composites Meet Sustainability. Lausanne, Switzerland. 26 - 30 June. ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability. pp. 477 - 484.Open Access Link
Jayasree, N., Omairey, S., Loukodimou, V., Bradbury, A., Lidgett, M., Elliott, R., et al. (2022) 'Optimised composite crash structure development with focus of life cycle analysis for a fuel cell electric vehicle'.20th European Conference on Composite Materials - Composites Meet Sustainability. Lausanne, Switzerland. 26 - 30 June. ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability. pp. 555 - 562.Open Access Link
Mishnaevsky, L., Bendixen, B., Mahajan, P., Fæster, S., Johansen, NFJ., Paul, D. and et al. (2022) 'Repair of Wind Turbine Blades: Costs and Quality'.The Science of Making Torque from Wind (TORQUE 2022). Delft, Netherlands. 2 - 3 June. IOP Publishing. pp. 1 - 8. ISSN: 1742-6588 Open Access Link
Omairey, SL., Loukodimouf, V., Sampethai, S., Bahrami, F., Kazilas, M. and Salamat-Zadeh, F. (2022) 'Design against distortion for aerospace-grade additively manufactured parts - PADICTON'.International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens (11th EASN 2021). Online. 15 - 3 September. IOP Publishing. pp. 012003 - 012003. ISSN: 1757-8981 Open Access Link
Blanco, E., Omairey, SL., Luque, R., Barrientos, JM., Ferrera, E. and Kazilas, M. (2022) 'Jig-less end-effector system for automating exhausting composite fuselage assembly tasks'.International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens (11th EASN 2021). Online. 15 - 3 September. IOP Publishing. pp. 012005 - 012005. ISSN: 1757-8981 Open Access Link
Zitoun, A., Fakis, D., Jayasree, N., Omairey, S., Oikonomidis, F., Stoeva, Z. and et al. (2022) 'Graphene-based strain sensing in composites for structural and health monitoring applications'. SN Applied Sciences, 4 (2). pp. 1 - 17. ISSN: 2523-3963 Open Access Link
Zitoun, A., Dixon, S., Kazilas, M. and Hutchins, D. (2022) 'The Effect of Changes in Magnetic Field and Frequency on the Vibration of a Thin Magnetostrictive Patch as a Tool for Generating Guided Ultrasonic Waves'. Sensors, 22 (3). pp. 1 - 15. ISSN: 1424-8220 Open Access Link
Omairey, SL., Dunning, PD. and Sriramula, S. (2022) 'The Effect of Matrix Property Smoothing on the Reliability of Fibre-Reinforced Composites'. Springer Nature Singapore. pp. 217 - 228. ISSN: 2195-4356
Paul, D., Velmurugan, R. and Gupta, NK. (2022) 'Experimental and analytical studies of syntactic foam core composites for impact loading'. International Journal of Crashworthiness, 27 (1). pp. 299 - 316. ISSN: 1358-8265
Al-Rukaibawi, LS., Omairey, S. and Károlyi, G. (2021) 'A numerical anatomy-based modelling of bamboo microstructure'. Construction and Building Materials, 308. pp. 1 - 13. ISSN: 0950-0618 Open Access Link
Asareh, M., Pouchias, A., Zitoun, A., Yasaee, M., Kazilas, M. and Skordos, A. (2021) 'Electrical and Mechanical Behaviour of Copper Tufted CFRP Composite Joints'.SAMPE Europe Conference (SAMPE Europe 21). Baden/Zürich, Switzerland. 29 - 30 September.Open Access Link
Omairey, S., Jayasree, N. and Kazilas, M. (2021) 'Injection repair of advanced composites: a prospective method for delamination damage repair', in Verma, D., Sharma, M., Lim Goh, K., Jain, S. and Sharma, H. (eds.) Sustainable Biopolymer Composites Biocompatibility, Self-Healing, Modeling, Repair and Recyclability. United Kingdom : Elsevier B.V.. pp. 183 - 211. ISBN 13: 978-0-12-822291-1. Open Access Link
Omairey, S., Sampethai, S., Hans, L., Worrall, C., Lewis, S., Negro, D., et al. (2021) 'Development of innovative automated solutions for the assembly of multifunctional thermoplastic composite fuselage'. International Journal of Advanced Manufacturing Technology, 117 (5-6). pp. 1721 - 1738. ISSN: 0178-0026 Open Access Link
Omairey, S., Jayasree, N. and Kazilas, M. (2021) 'Defects and uncertainties of adhesively bonded composite joints'. SN Applied Sciences, 3 (9). ISSN: 2523-3963 Open Access Link
Zitoun, A., Dixon, S., Edwards, G. and Hutchins, D. (2020) 'Experimental Study of the Guided Wave Directivity Patterns of Thin Removable Magnetostrictive Patches'. Sensors, 20 (24). pp. 1 - 19. ISSN: 1424-8220 Open Access Link
Jayasree, N., Omairey, S. and Kazilas, M. (2020) 'Novel multi-zone self-heated composites tool for out-of-autoclave aerospace components manufacturing'. Science and Engineering of Composite Materials, 27 (1). pp. 325 - 334. ISSN: 0792-1233 Open Access Link
Omairey, SL., Dunning, PD. and Sriramula, S. (2020) 'Multi-scale reliability-based design optimisation framework for fibre-reinforced composite laminates'. Engineering Computations (Swansea, Wales), 38 (3). pp. 1241 - 1262. ISSN: 0264-4401 Open Access Link
Loukodimou, V., Kazilas, MC. and Skordos, AA. (2020) 'Simulation of damage on carbon fibre laminates using the Ladevèze material model'. ECCM 2018 - 18th European Conference on Composite Materials.
Pouchias, A., Kazilas, M., Cunningham, P. and Stein, J. (2019) 'Development of a flexible dielectric sensor for flow monitoring of the liquid resin infusion process'. Sensors, 19 (23). pp. 5292 - 5292. ISSN: 1424-8220 Open Access Link
Loukodimou, V., Kazilas, MC. and Skordos, AA. (2019) 'Simulation of damage on carbon fibre laminates using the Ladevèze material model'.18th European Conference on Composite Materials (ECCM-18). Athens, Greece. 1 - 28 June. Proceedings of the 18th European Conference on Composite Materials (ECCM-18). pp. 1 - 7.Open Access Link
Omairey, SL., Dunning, PD. and Sriramula, S. (2019) 'Multiscale surrogate-based framework for reliability analysis of unidirectional FRP composites'. Composites Part B: Engineering, 173. pp. 106925 - 106925. ISSN: 1359-8368
Bahrami, F., Worrall, CM., Ogin, SL., Oldfield, M. and Watts, JF. (2019) 'Thermally assisted piercing; manufacture and properties of multiply-pierced composites'.International Conference on Composite Materials. Melbourne, Australia. 11 - 16 August. Proceedings of the 22nd International Conference on Composite Materials (ICCM22 2019. pp. 1269 - 1280.Open Access Link
Paul, D., Ramachandran, V. and Gupta, NK. (2019) 'Improvements in the crushing behaviour of glass fibre-epoxy composite tubes by the addition of hollow glass particles'. Thin-Walled Structures, 141. pp. 111 - 118. ISSN: 0263-8231
Fakis, DI., Worrall, C. and Kazilas, M. (2019) 'Waveguide Method for Surface Impedance Measurements on Composite Material Substrates'.2019 93rd ARFTG Microwave Measurement Conference (ARFTG). Boston, MA. 1 - 7 June. IEEE.
Omairey, SL., Dunning, PD. and Sriramula, S. (2019) 'Development of an ABAQUS plugin tool for periodic RVE homogenisation'. Engineering with Computers, 35 (2). pp. 567 - 577. ISSN: 0177-0667
Pouchias, A., Cunningham, PR., Stein, J. and Kazilas, M. (2019) 'Online flow monitoring system development for the resin transfer moulding process'.18th European Conference on Composite Materials (ECCM-18). Athens, Greece. 1 - 28 June. Proccedings of the 18th European Conference on Composite Materials (ECCM-18). pp. 1 - 7.Open Access Link
Omairey, SL., Dunning, PD. and Sriramula, S. (2018) 'Influence of micro-scale uncertainties on the reliability of fibre-matrix composites'. Composite Structures, 203. pp. 204 - 216. ISSN: 0263-8223
Omairey, S., Dunning, P. and Sriramula, S. (2018) 'Effect of micro-scale uncertainties on the elastic properties of fibre-matrix composites'. Proceedings of the 6th European Conference on Computational Mechanics: Solids, Structures and Coupled Problems, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018. pp. 828 - 839.
Paul, D., Velmurugan, R., Jayaganthan, R., Gupta, NK. and Manzhirov, AV. (2018) 'Analysis of syntactic foam - GFRP sandwich composites for flexural loads'. IOP Publishing. pp. 012064 - 012064. ISSN: 1742-6588
Atlani, R., Fassois, SD., Georgantopoulou, A., Kazilas, M., Kressel, I., Kwak, M., et al. (2018) 'A random vibration based platform for statistical damage detection in a population of nominally identical composite aerostructures'. 9th European Workshop on Structural Health Monitoring, EWSHM 2018.
Paul, D. and Velmurugan, R. (2018) 'Analysis of the specific properties of glass microballoon-epoxy syntactic foams under tensile and flexural loads'. Elsevier BV. pp. 16956 - 16962. ISSN: 2214-7853
Jayasree, NA., Airale, AG., Ferraris, A., Messana, A., Sisca, L. and Carello, M. (2017) 'Process analysis for structural optimisation of thermoplastic composite component using the building block approach'. Composites Part B: Engineering, 126. pp. 119 - 132. ISSN: 1359-8368
(2016) 'Unidirectional Carbon Fibre Anchorage Length Effect on Flexural Strength Capacity For Concrete Beams'.2nd International Conference on Architecture, Structure and Civil Engineering. Universal Researchers.
Kazilas, MC. (2011) 'Industrial dielectric cure monitoring and its application to out-of-autoclave cure monitoring and control'. International SAMPE Technical Conference.
Tsamasphyros, G., Kalkanis, K., Kanderakis, G., Pantelelis, N., Tur, M., Botsev, Y., et al. (2009) 'Combined application of Bragg gratings and dielectric sensors for the cure monitoring of bonded composite repairs'.20th International Conference on Optical Fibre Sensors. SPIE. ISSN: 0277-786X
Kazilas, MC. and Partridge, IK. (2005) 'Exploring equivalence of information from dielectric and calorimetric measurements of thermoset cure-a model for the relationship between curing temperature, degree of cure and electrical impedance'. Polymer, 46 (16). pp. 5868 - 5878. ISSN: 0032-3861
Kazilas, MC., Skordos, AA. and Partridge, IK. (2005) 'Parameter estimation in equivalent circuit analysis of dielectric cure monitoring signals using genetic algorithms'. Inverse Problems in Science and Engineering, 13 (2). pp. 157 - 176. ISSN: 1741-5977
Kazilas, MC. and Partridge, IK. (2004) 'Temperature modulated dielectric analysis (TMDA): A new experimental technique for the separation of temperature and reaction effects in dielectric cure monitoring signals'. Measurement Science and Technology, 15 (5). pp. L1 - L4. ISSN: 0957-0233
Tsangaris, GM. and Kazilas, MC. (2002) 'Conductivity and percolation in epoxy resin/conductive filler composites'. Materials Science and Technology, 18 (2). pp. 226 - 230. ISSN: 0267-0836