BCC
Fong, E., Koponen, K., Omairey, S. and Dunning, P. (2023) 'Thermal–mechanical metamaterial analysis and optimization using an Abaqus plugin'. Engineering with Computers, 40 (2). pp. 1145 - 1155. ISSN: 0177-0667 Open Access Link
Rodrigues, FDS., Hami Seno, A., Sharif Khodaei, Z. and Aliabadi, F. (2023) 'Structural health monitoring platform for industrial scale composite structures'.The 20th International Conference on Fracture and Damage Mechanics (FDM 2022). Malaga, Spain Previous Article Next Article. 12 - 7 September. AIP Publishing. pp. 020041-1 - 020041-10. ISSN: 0094-243X Open Access Link
Ali, MA., Khan, T., Khan, KA. and Umer, R. (2023) 'Micro Computed Tomography based stochastic design and flow analysis of dry fiber preforms manufactured by automated fiber placement'. Journal of Composite Materials, 57 (12). pp. 2075 - 2090. ISSN: 0021-9983
Syerko, E., Schmidt, T., May, D., Binetruy, C., Advani, SG., Lomov, S., et al. (2023) 'Benchmark exercise on image-based permeability determination of engineering textiles: Microscale predictions'. Composites Part A: Applied Science and Manufacturing, 167. pp. 107397 - 107397. ISSN: 1359-835X
Ali, MA., Irfan, MS., Khan, T., Khalid, MY. and Umer, R. (2023) 'Graphene nanoparticles as data generating digital materials in industry 4.0'. Scientific Reports, 13 (1). pp. 1 - x. ISSN: 2045-2322 Open Access Link
Hami Seno, A. and Ferri Aliabadi, MH. (2023) 'Multifidelity data augmentation for data driven passive impact location and force estimation in composite structures under simulated environmental and operational conditions'. Mechanical Systems and Signal Processing, 195. pp. 1 - 17. ISSN: 0888-3270 Open Access Link
Akhtar, K., Ali, H., Ud Din, I., Abbas, A., Zahir, MZ., Ahmad, F., et al. (2023) 'Heat Transfer Augmentation and Entropy Generation Analysis of Microchannel Heat Sink (MCHS) with Symmetrical Ogive-Shaped Ribs'. Energies, 16 (6). pp. 1 - 23.
Khan, T., Ali, MA., Irfan, MS., Cantwell, WJ. and Rehan, U. (2023) 'Visualizing pseudo‐ductility in carbon/glass fiber hybrid composites manufactured using infusible thermoplastic Elium® resin'. Polymer Composites, 44 (3). pp. 1859 - 1876. ISSN: 0272-8397
Paul, D., Varshney, A., Mahajan, P. and Mishnaevsky, L. (2023) 'Post-repair residual stresses and microstructural defects in wind turbine blades: Computational modelling'. International Journal of Adhesion and Adhesives, 123. pp. 1 - 14. ISSN: 0143-7496
Gaitanelis, D., Chanteli, A., Worrall, C., Weaver, PM. and Kazilas, M. (2023) 'A multi-technique and multi-scale analysis of the thermal degradation of PEEK in laser heating'. Polymer Degradation and Stability, 211. pp. 1 - 12. ISSN: 0141-3910 Open Access Link
Irfan, MS., Ali, MA., Khan, T., Anwer, S., Liao, K. and Umer, R. (2023) 'MXene and graphene coated multifunctional fiber reinforced aerospace composites with sensing and EMI shielding abilities'. Composites Part A: Applied Science and Manufacturing, 165. pp. 107351 - 107351. ISSN: 1359-835X
Paul, D., Velmurugan, R. and Gupta, NK. (2023) 'Drop weight impact analysis of GFRP tubes with hollow glass particle-filled matrix'. Defence Technology, 29. pp. 1 - 9. ISSN: 2096-3459 Open Access Link
Alizadeh, E., Omairey, S. and Zysset, P. (2023) 'Investigating the post-yield behavior of mineralized bone fibril arrays using a 3D non-linear finite element unit-cell model'. Journal of the Mechanical Behavior of Biomedical Materials, 138. pp. 1 - 14. ISSN: 1751-6161 Open Access Link
Zitoun, A., Dixon, S., Kazilas, M. and Hutchins, D. (2023) 'Defect Detection and Imaging in Composite Structures Using Magnetostrictive Patch Transducers'. Sensors, 23 (2). pp. 1 - 16. ISSN: 1424-8220 Open Access Link
Khayam, U., Suryandi, AA. and Rachmawati. (2023) 'Design of Bowtie Antenna With Rounded Edge and Middle-Sliced Modifications for UHF Partial Discharge Sensor'. IEEE Access, 11. pp. 22822 - 22834.
Luthfiyah, H., Qowiy, OA., Malakani, AI., Arthanto, DH., Setiawan, FD., Ramanel, TA., et al. (2023) 'An optimized stator and rotor design of squirrel cage induction motor for EMU train'. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 14 (1). pp. 35 - 46. ISSN: 2087-3379
Mandasari, DR., Amelia, L., Malakani, AI., Purnomo, ED., Aziz, A., Suryandi, AA., et al. (2023) 'Reduction of cogging torque in segmented permanent magnet BLDC motor IPM v-shape by skewing stator'.THE INTERNATIONAL CONFERENCE ON BATTERY FOR RENEWABLE ENERGY AND ELECTRIC VEHICLES (ICB-REV) 2022. AIP Publishing. pp. 040003 - 040003. ISSN: 0094-243X
Suryandi, AA., Sarma, N., Mohammed, A., Peesapati, V. and Djurović, S. (2022) 'Fiber Optic Fiber Bragg Grating Sensing for Monitoring and Testing of Electric Machinery: Current State of the Art and Outlook'. Machines, 10 (11). pp. 1103 - 1103.
Ud Din, I., Medhin, Y., Aslam, N., Bathusha, MSS., Umer, R. and Khan, KA. (2022) 'Rate dependent piezoresistive characterization of smart aerospace sandwich structures embedded with reduced graphene oxide (rGO) coated fabric sensors'. Composites Communications, 36. pp. 1 - 6. ISSN: 2452-2139
Manzoor, S., Ud Din, I., Giasin, K., Köklü, U., Khan, KA. and Panier, S. (2022) 'Three-Dimensional Finite Element Modeling of Drilling-Induced Damage in S2/FM94 Glass-Fiber-Reinforced Polymers (GFRPs)'. Materials, 15 (20). pp. 1 - 15. ISSN: 1996-1944 Open Access Link
Yu, H., Hami Seno, A., Sharif Khodaei, Z. and Ferri Aliabadi, MH. (2022) 'Structural Health Monitoring Impact Classification Method Based on Bayesian Neural Network'. Polymers, 14 (19). pp. 1 - 22. ISSN: 2073-4360 Open Access Link
Ud Din, I., Aslam, N., Medhin, Y., Sikandar Bathusha, MS., Irfan, MS., Umer, R. and et al. (2022) 'Electromechanical behavior of self-sensing composite sandwich structures for next generation more electric aerostructures'. Composite Structures, 300. pp. 1 - 12. ISSN: 0263-8223
Gaitanelis, D., Worrall, C. and Kazilas, M. (2022) 'Detecting, characterising and assessing PEEK’s and CF-PEEK’s thermal degradation in rapid high-temperature processing'. Polymer Degradation and Stability, 204. pp. 1 - 14. ISSN: 0141-3910 Open Access Link
Ali, MA., Irfan, MS., Khan, T., Ubaid, F., Liao, K. and Umer, R. (2022) 'In-situ monitoring of reinforcement compaction response via MXene-coated glass fabric sensors'. Composites Science and Technology, 227. pp. 109623 - 109623. ISSN: 0266-3538
Orlova, DA., Panchenko, AY., Omairey, SL. and Berinskii, IE. (2022) 'Computational homogenization of bio-inspired metamaterial with a random fiber network microstructure'. Mechanics Research Communications, 124. pp. 1 - 6. ISSN: 0093-6413
Caglar, B., Broggi, G., Ali, MA., Orgéas, L. and Michaud, V. (2022) 'Deep learning accelerated prediction of the permeability of fibrous microstructures'. Composites Part A: Applied Science and Manufacturing, 158. pp. 106973 - 106973. ISSN: 1359-835X
Bahrami, F., Omairey, S., Bone, G., Matthews, M., Worrall, C., Sampethai, S., et al. (2022) 'Polymer coating material for innovative reversible dissimilar composite-metal joining for automotive applications'.20th European Conference on Composite Materials - Composites Meet Sustainability. Lausanne, Switzerland. 26 - 30 June. ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability. pp. 477 - 484.Open Access Link
Jayasree, N., Omairey, S., Loukodimou, V., Bradbury, A., Lidgett, M., Elliott, R., et al. (2022) 'Optimised composite crash structure development with focus of life cycle analysis for a fuel cell electric vehicle'.20th European Conference on Composite Materials - Composites Meet Sustainability. Lausanne, Switzerland. 26 - 30 June. ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability. pp. 555 - 562.Open Access Link
Ud Din, I., Medhin, Y., Aslam, N., Salman, M., Bathusha, S., Umer, R. and et al. (2022) 'Rate Dependent Electromechancal Characterization And Modeling Of Graphene Based Fiber Reinforced Polymer Laminates'.20th European Conference on Composite Materials, ECCM20. Lausanne, Switzerland. 26 - 30 June. Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability ECCM20. pp. 187 - 194.Open Access Link
Suryandi, AA., Tuohy, P. and Djurovic, S. (2022) 'Finite Element Analysis Study of FBG Magnetostrictive Composite Flux Sensor Geometry for Electric Motor Air-gap Flux Monitoring'.2022 11th Mediterranean Conference on Embedded Computing (MECO). IEEE. pp. 01 - 06.
Suryandi, AA. and Djurovic, S. (2022) 'FBG Magnetostrictive Composite Flux Sensor for Monitoring Rotor Permanent Magnet Flux'.2022 11th Mediterranean Conference on Embedded Computing (MECO). IEEE.
Mishnaevsky, L., Bendixen, B., Mahajan, P., Fæster, S., Johansen, NFJ., Paul, D. and et al. (2022) 'Repair of Wind Turbine Blades: Costs and Quality'.The Science of Making Torque from Wind (TORQUE 2022). Delft, Netherlands. 2 - 3 June. IOP Publishing. pp. 1 - 8. ISSN: 1742-6588 Open Access Link
Irfan, MS., Patel, S., Umer, R., Ali, MA. and Dong, Y. (2022) 'Thermal and morphological analysis of various 3D printed composite honeycomb cores'. Composite Structures, 290. pp. 115517 - 115517. ISSN: 0263-8223
Khan, T., Ali, MA., Irfan, MS., Khan, KA., Liao, K. and Umer, R. (2022) 'Resin infusion process monitoring using graphene coated glass fabric sensors and infusible thermoplastic and thermoset matrices'. Polymer Composites, 43 (5). pp. 2924 - 2940. ISSN: 0272-8397
Irfan, MS., Ali, MA., Khan, KA., Umer, R., Kanellopoulos, A. and Abdul Samad, Y. (2022) 'An electronic textile embedded smart cementitious composite'. Engineering Reports, 4 (3). ISSN: 2577-8196
Blanco, E., Omairey, SL., Luque, R., Barrientos, JM., Ferrera, E. and Kazilas, M. (2022) 'Jig-less end-effector system for automating exhausting composite fuselage assembly tasks'.International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens (11th EASN 2021). Online. 15 - 3 September. IOP Publishing. pp. 012005 - 012005. ISSN: 1757-8981 Open Access Link
Omairey, SL., Loukodimouf, V., Sampethai, S., Bahrami, F., Kazilas, M. and Salamat-Zadeh, F. (2022) 'Design against distortion for aerospace-grade additively manufactured parts - PADICTON'.International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens (11th EASN 2021). Online. 15 - 3 September. IOP Publishing. pp. 012003 - 012003. ISSN: 1757-8981 Open Access Link
Zitoun, A., Fakis, D., Jayasree, N., Omairey, S., Oikonomidis, F., Stoeva, Z. and et al. (2022) 'Graphene-based strain sensing in composites for structural and health monitoring applications'. SN Applied Sciences, 4 (2). pp. 1 - 17. ISSN: 2523-3963 Open Access Link
Zitoun, A., Dixon, S., Kazilas, M. and Hutchins, D. (2022) 'The Effect of Changes in Magnetic Field and Frequency on the Vibration of a Thin Magnetostrictive Patch as a Tool for Generating Guided Ultrasonic Waves'. Sensors, 22 (3). pp. 1 - 15. ISSN: 1424-8220 Open Access Link
Omairey, SL., Dunning, PD. and Sriramula, S. (2022) 'The Effect of Matrix Property Smoothing on the Reliability of Fibre-Reinforced Composites'. Springer Nature Singapore. pp. 217 - 228. ISSN: 2195-4356
Paul, D., Velmurugan, R. and Gupta, NK. (2022) 'Experimental and analytical studies of syntactic foam core composites for impact loading'. International Journal of Crashworthiness, 27 (1). pp. 299 - 316. ISSN: 1358-8265
Ali, MA., Guan, Q., Umer, R., Cantwell, WJ. and Zhang, T. (2022) 'Efficient processing of μCT images using deep learning tools for generating digital material twins of woven fabrics'. Composites Science and Technology, 217. pp. 109091 - 109091. ISSN: 0266-3538
Caglar, B., Broggi, G., Ali, MA., Orgéas, L. and Michaud, V. (2022) 'DEEP LEARNING BASED PREDICTION OF FIBROUS MICROSTRUCTURE PERMEABILITY'. Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability. pp. 807 - 814.
Khan, T., Irfan, MS., Ali, MA., Khan, KA., Liao, K. and Umer, R. (2022) 'PROCESS MONITORING USING LIQUID THERMOPLASTIC RESIN AND 2D NANOMATERIAL-BASED FABRIC SENSORS'. Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability. pp. 1037 - 1043.
Ali, MA., Khan, T., Irfan, MS. and Umer, R. (2022) 'SEMANTIC SEGMENTATION OF μCT IMAGES OF 3D WOVEN FABRIC USING DEEP LEARNING'. Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability. pp. 831 - 837.
Al-Rukaibawi, LS., Omairey, S. and Károlyi, G. (2021) 'A numerical anatomy-based modelling of bamboo microstructure'. Construction and Building Materials, 308. pp. 1 - 13. ISSN: 0950-0618 Open Access Link
Asareh, M., Pouchias, A., Zitoun, A., Yasaee, M., Kazilas, M. and Skordos, A. (2021) 'Electrical and Mechanical Behaviour of Copper Tufted CFRP Composite Joints'.SAMPE Europe Conference (SAMPE Europe 21). Baden/Zürich, Switzerland. 29 - 30 September.Open Access Link
ALI, MA. and UMER, R. (2021) 'DEEP CONVOLUTIONAL NEURAL NETWORK FOR SEGMENTING CT IMAGES OF FIBER REINFORCEMENTS'.Thirty-sixth Technical Conference. Destech Publications, Inc.. pp. 1080 - 1087.
Omairey, S., Jayasree, N. and Kazilas, M. (2021) 'Injection repair of advanced composites: a prospective method for delamination damage repair', in Verma, D., Sharma, M., Lim Goh, K., Jain, S. and Sharma, H. (eds.) Sustainable Biopolymer Composites Biocompatibility, Self-Healing, Modeling, Repair and Recyclability. United Kingdom : Elsevier B.V.. pp. 183 - 211. ISBN 13: 978-0-12-822291-1. Open Access Link
Shah, SZH., Megat-Yusoff, PSM., Choudhry, RS., Sajid, Z. and Ud Din, I. (2021) 'Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites'. Composites Communications, 28. pp. 1 - 6. ISSN: 2452-2139
Ali, MA., Khan, KA. and Umer, R. (2021) 'An electric circuit analogy-based homogenization approach for predicting the effective permeability of complex dual-scale porous media'. Materials Today Communications, 28. pp. 102565 - 102565. ISSN: 2352-4928