Ali, MA., Khan, KA. and Umer, R. (2021) 'An electric circuit analogy-based homogenization approach for predicting the effective permeability of complex dual-scale porous media'. Materials Today Communications, 28. pp. 102565 - 102565. ISSN: 2352-4928

Yong, AXH., Aktas, A., May, D., Endruweit, A., Advani, S., Hubert, P., Abaimov, SG., Abliz, D., Akhatov, I., Ali, MA., Allen, T., Berg, DC., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Caglar, H., Causse, P., Chiminelli, A., Cohades, A., Comas-Cardona, S., Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., Garcia-Manrique, JA., George, A., Graupner, R., Grishaev, V., Guilloux, A., Hancioglu, M., Harizi, W., Herman, T., Huang, W., Kabachi, MA., Keller, A., Kind, K., Laspalas, M., Lebedev, OV., Lizaranzu, M., Long, AC., Masania, K., Michaud, V., Middendorf, P., Salvatori, D., Schubnel, R., Sharp, N., Sozer, M., Thomas, J., Trochu, F., Umer, R., Valette, J., Wang, JH. and Willenbacher, B. et al. (2021) 'Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise'. Composites Part A: Applied Science and Manufacturing, 148. pp. 106480 - 106480. ISSN: 1359-835X

Omairey, S., Sampethai, S., Hans, L., Worrall, C., Lewis, S., Negro, D., Sattar, T., Ferrera, E., Blanco, E., Wighton, J., Muijs, L., Veldman, S., Doldersum, M., Tonnaer, R., Jayasree, N. and Kazilas, M. et al. (2021) 'Development of innovative automated solutions for the assembly of multifunctional thermoplastic composite fuselage'. International Journal of Advanced Manufacturing Technology, 117 (5-6). pp. 1721 - 1738. ISSN: 0178-0026 Open Access Link

Omairey, S., Jayasree, N. and Kazilas, M. (2021) 'Defects and uncertainties of adhesively bonded composite joints'. SN Applied Sciences, 3 (9). ISSN: 2523-3963 Open Access Link

Hami Seno, A. and Ferri Aliabadi, MH. (2021) 'Uncertainty quantification for impact location and force estimation in composite structures'. Structural Health Monitoring, 21 (3). pp. 1061 - 1075. ISSN: 1475-9217 Open Access Link

Suryandi, AA., Damian, IE. and Djurovic, S. (2021) 'FBG Magnetostrictive Composite Flux Sensor Response Characterisation for Surface Permanent Magnet Rotor Flux Monitoring'.2021 10th Mediterranean Conference on Embedded Computing (MECO). IEEE. pp. 1 - 6.

Aamir, M., Giasin, K., Tolouei-Rad, M., Ud Din, I., Hanif, MI., Kuklu, U., Pimenov, DY. and Ikhlaq, M. et al. (2021) 'Effect of Cutting Parameters and Tool Geometry on the Performance Analysis of One-Shot Drilling Process of AA2024-T3'. Metals, 11 (6). pp. 1 - 13.

Yong, AXH., Aktas, A., May, D., Endruweit, A., Lomov, SV., Advani, S., Hubert, P., Abaimov, SG., Abliz, D., Akhatov, I., Ali, MA., Allaoui, S., Allen, T., Berg, DC., Bickerton, S., Caglar, B., Causse, P., Chiminelli, A., Comas-Cardona, S., Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., George, A., Gillibert, J., Govignon, Q., Graupner, R., Grishaev, V., Guilloux, A., Kabachi, MA., Keller, A., Kind, K., Large, D., Laspalas, M., Lebedev, OV., Lizaranzu, M., Long, AC., López, C., Masania, K., Michaud, V., Middendorf, P., Mitschang, P., van Oosterom, S., Schubnel, R., Sharp, N., Sousa, P., Trochu, F., Umer, R., Valette, J. and Wang, JH. et al. (2021) 'Experimental characterisation of textile compaction response: A benchmark exercise'. Composites Part A: Applied Science and Manufacturing, 142. pp. 106243 - 106243. ISSN: 1359-835X

Shah, SZH., Megat-Yusoff, PSM., Karuppanan, S., Choudhry, RS., Ud Din, I., Othman, AR., Sharp, K. and Gerard, P. et al. (2020) 'Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites'. Composites Part B: Engineering, 207 (15 February 2021). pp. 1 - 14. ISSN: 1359-8368

Zitoun, A., Dixon, S., Edwards, G. and Hutchins, D. (2020) 'Experimental Study of the Guided Wave Directivity Patterns of Thin Removable Magnetostrictive Patches'. Sensors, 20 (24). pp. 1 - 19. ISSN: 1424-8220 Open Access Link

Umer, R., Ali, MA., Alia, RA., Khan, KA. and Cantwell, WJ. (2020) 'Creep compaction and μCT based permeability measurement of aerospace-grade out-of-life prepregs'. Materials Today Communications, 25. pp. 101419 - 101419. ISSN: 2352-4928

Ali, MA., Guan, Q., Umer, R., Cantwell, WJ. and Zhang, T. (2020) 'Deep learning based semantic segmentation of µCT images for creating digital material twins of fibrous reinforcements'. Composites Part A: Applied Science and Manufacturing, 139. pp. 106131 - 106131. ISSN: 1359-835X

Seno, AH. and Aliabadi, MHF. (2020) 'Correction: Seno, A.H.; Ferri Aliabadi, M.H. Impact Localisation in Composite Plates of Different Stiffness Impactors under Simulated Environmental and Operational Conditions. Sensors 2019, 19, 3659'. Sensors, 20 (22). pp. 6410 - 6410. ISSN: 1424-8220

Seno, AH. and Aliabadi, MHF. (2020) 'A novel method for impact force estimation in composite plates under simulated environmental and operational conditions'. Smart Materials and Structures, 29 (11). pp. 115029 - 115029. ISSN: 0964-1726

Ud Din, I., Tu, S., Hao, P., Panier, S., Khan, KA., Umer, R., Shah, SZH., Franz, G. and Aamir, M. et al. (2020) 'Sequential damage study induced in fiber reinforced composites by shear and tensile stress using a newly developed Arcan fixture'. Journal of Materials Research and Technology, 9 (6). pp. 13352 - 13364. ISSN: 2238-7854

Jayasree, N., Omairey, S. and Kazilas, M. (2020) 'Novel multi-zone self-heated composites tool for out-of-autoclave aerospace components manufacturing'. Science and Engineering of Composite Materials, 27 (1). pp. 325 - 334. ISSN: 0792-1233 Open Access Link

Ali, MA., Umer, R. and Khan, KA. (2020) 'A virtual permeability measurement framework for fiber reinforcements using micro CT generated digital twins'. International Journal of Lightweight Materials and Manufacture, 3 (3). pp. 204 - 216. ISSN: 2588-8404

Omairey, SL., Dunning, PD. and Sriramula, S. (2020) 'Multi-scale reliability-based design optimisation framework for fibre-reinforced composite laminates'. Engineering Computations (Swansea, Wales), 38 (3). pp. 1241 - 1262. ISSN: 0264-4401 Open Access Link

Ud Din, I., Naresh, K., Umer, R., Khan, KA., Drzal, LT., Haq, M. and Cantwell, WJ. et al. (2020) 'Processing and out-of-plane properties of composites with embedded graphene paper for EMI shielding applications'. Composites Part A: Applied Science and Manufacturing, 134. pp. 105901 - 105901. ISSN: 1359-835X

Ud Din, I., Hao, P., Panier, S., Khan, KA., Aamir, M., Franz, G. and Akhtar, K. et al. (2020) 'Design of a New Arcan Fixture for In-plane Pure Shear and Combined Normal/Shear Stress Characterization of Fiber Reinforced Polymer Composites'. Experimental Techniques, 44 (2). pp. 231 - 240. ISSN: 0732-8818

Ali, MA., Umer, R. and Khan, KA. (2020) 'Experimental-Numerical Hybrid Reinforcement Characterization Framework', inCT Scan Generated Material Twins for Composites Manufacturing in Industry 4.0. Springer Singapore. pp. 73 - 94. ISBN 13: 9789811580208.

Seno, AH. and Aliabadi, MH. (2020) 'A Comparative Study of Impact Localisation in Composite Structures Using Neural Networks under Environmental and Operational Variations'. Trans Tech Publications, Ltd.. pp. 410 - 415. ISSN: 1013-9826

Ali, MA., Umer, R. and Khan, KA. (2020) 'Experimental-Empirical Hybrid Approach', inCT Scan Generated Material Twins for Composites Manufacturing in Industry 4.0. Springer Singapore. pp. 153 - 170. ISBN 13: 9789811580208.

Ali, MA., Umer, R. and Khan, KA. (2020) 'Reinforcement Compaction Response', inCT Scan Generated Material Twins for Composites Manufacturing in Industry 4.0. Springer Singapore. pp. 95 - 113. ISBN 13: 9789811580208.

Ali, MA., Umer, R. and Khan, KA. (2020) 'Generation of Material Twin Using Micro CT Scanning', inCT Scan Generated Material Twins for Composites Manufacturing in Industry 4.0. Springer Singapore. pp. 19 - 52. ISBN 13: 9789811580208.

Ali, MA., Umer, R. and Khan, KA. (2020) 'CT Scan Generated Material Twins for Composites Manufacturing in Industry 4.0'. Springer Singapore. ISSN 13: 9789811580208

Ali, MA., Umer, R. and Khan, KA. (2020) 'Flow Fields and Reinforcement Permeability', inCT Scan Generated Material Twins for Composites Manufacturing in Industry 4.0. Springer Singapore. pp. 115 - 151. ISBN 13: 9789811580208.

Ali, MA., Umer, R. and Khan, KA. (2020) 'Experimental Techniques for Reinforcement Characterization', inCT Scan Generated Material Twins for Composites Manufacturing in Industry 4.0. Springer Singapore. pp. 53 - 72. ISBN 13: 9789811580208.

Ali, MA., Umer, R. and Khan, KA. (2020) 'Introduction', inCT Scan Generated Material Twins for Composites Manufacturing in Industry 4.0. Springer Singapore. pp. 1 - 18. ISBN 13: 9789811580208.

Pouchias, A., Kazilas, M., Cunningham, P. and Stein, J. (2019) 'Development of a flexible dielectric sensor for flow monitoring of the liquid resin infusion process'. Sensors, 19 (23). pp. 5292 - 5292. ISSN: 1424-8220 Open Access Link

Loukodimou, V., Kazilas, MC. and Skordos, AA. (2019) 'Simulation of damage on carbon fibre laminates using the Ladevèze material model'.18th European Conference on Composite Materials (ECCM-18). Athens, Greece. 1 - 28 June. Proceedings of the 18th European Conference on Composite Materials (ECCM-18). pp. 1 - 7.Open Access Link

Hao, P., Din, IU. and Panier, S. (2019) 'Development of Modified Arcan Fixture for biaxial loading response of fiber-reinforced composites'. Polymer Testing, 80. pp. 106148 - 106148. ISSN: 0142-9418

Ali, MA., Umer, R., Khan, KA. and Cantwell, WJ. (2019) 'XCT-scan assisted flow path analysis and permeability prediction of a 3D woven fabric'. Composites Part B: Engineering, 176. pp. 107320 - 107320. ISSN: 1359-8368

Ali, MA., Umer, R., Khan, KA. and Cantwell, WJ. (2019) 'Application of X-ray computed tomography for the virtual permeability prediction of fiber reinforcements for liquid composite molding processes: A review'. Composites Science and Technology, 184. pp. 107828 - 107828. ISSN: 0266-3538

Wijaya, W., Ali, MA., Umer, R., Khan, KA., Kelly, PA. and Bickerton, S. (2019) 'An automatic methodology to CT-scans of 2D woven textile fabrics to structured finite element and voxel meshes'. Composites Part A: Applied Science and Manufacturing, 125. pp. 105561 - 105561. ISSN: 1359-835X

Aamir, M., Tolouei-Rad, M., Din, IU., Giasin, K. and Vafadar, A. (2019) 'Performance of SAC305 and SAC305-0.4La lead free electronic solders at high temperature'. Soldering & Surface Mount Technology, 31 (4). pp. 250 - 260. ISSN: 0954-0911

Seno, AH. and Aliabadi, MHF. (2019) 'Impact Localisation in Composite Plates of Different Stiffness Impactors under Simulated Environmental and Operational Conditions'. Sensors, 19 (17). pp. 3659 - 3659. ISSN: 1424-8220

Omairey, SL., Dunning, PD. and Sriramula, S. (2019) 'Multiscale surrogate-based framework for reliability analysis of unidirectional FRP composites'. Composites Part B: Engineering, 173. pp. 106925 - 106925. ISSN: 1359-8368

Bahrami, F., Worrall, CM., Ogin, SL., Oldfield, M. and Watts, JF. (2019) 'Thermally assisted piercing; manufacture and properties of multiply-pierced composites'.International Conference on Composite Materials. Melbourne, Australia. 11 - 16 August. Proceedings of the 22nd International Conference on Composite Materials (ICCM22 2019. pp. 1269 - 1280.Open Access Link

Paul, D., Ramachandran, V. and Gupta, NK. (2019) 'Improvements in the crushing behaviour of glass fibre-epoxy composite tubes by the addition of hollow glass particles'. Thin-Walled Structures, 141. pp. 111 - 118. ISSN: 0263-8231

Seno, AH., Sharif Khodaei, Z. and Aliabadi, MHF. (2019) 'Passive sensing method for impact localisation in composite plates under simulated environmental and operational conditions'. Mechanical Systems and Signal Processing, 129. pp. 20 - 36. ISSN: 0888-3270

Ud Din, I., Panier, S., Hao, P., Franz, G., Bijwe, J. and Hui, L. (2019) 'Finite element modeling of indentation and adhesive wear in sliding of carbon fiber reinforced thermoplastic polymer against metallic counterpart'. Tribology International, 135. pp. 200 - 212. ISSN: 0301-679X

Fakis, DI., Worrall, C. and Kazilas, M. (2019) 'Waveguide Method for Surface Impedance Measurements on Composite Material Substrates'.2019 93rd ARFTG Microwave Measurement Conference (ARFTG). Boston, MA. IEEE. pp. 1 - 5.

May, D., Aktas, A., Advani, SG., Berg, DC., Endruweit, A., Fauster, E., Lomov, SV., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, MA., Allen, TD., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A., Correia, N., Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, MA., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, OV., Lizaranzu, M., Liotier, P-J., Middendorf, P., Morán, J., Park, C-H., Pipes, RB., Pucci, MF., Raynal, J., Rodriguez, ES., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, EM., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. and Ziegmann, G. et al. (2019) 'In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise'. Composites Part A: Applied Science and Manufacturing, 121. pp. 100 - 114. ISSN: 1359-835X

Omairey, SL., Dunning, PD. and Sriramula, S. (2019) 'Development of an ABAQUS plugin tool for periodic RVE homogenisation'. Engineering with Computers, 35 (2). pp. 567 - 577. ISSN: 0177-0667

Ali, MA., Umer, R., Khan, KA. and Cantwell, WJ. (2019) 'In-plane virtual permeability characterization of 3D woven fabrics using a hybrid experimental and numerical approach'. Composites Science and Technology, 173. pp. 99 - 109. ISSN: 0266-3538

Ali A., M., Umer, R. and Khan, KA. (2019) 'Equivalent Permeability of Adjacent Porous Regions'.2019 Advances in Science and Engineering Technology International Conferences (ASET). IEEE. pp. 1 - 4.

Pouchias, A., Cunningham, PR., Stein, J. and Kazilas, M. (2019) 'Online flow monitoring system development for the resin transfer moulding process'.18th European Conference on Composite Materials (ECCM-18). Athens, Greece. 1 - 28 June. Proccedings of the 18th European Conference on Composite Materials (ECCM-18). pp. 1 - 7.Open Access Link

UMER, R., ALI, M., KIHAN, K. and CANTWELL, W. (2019) 'A Novel Reinforcement Characterization Framework for Liquid Composite Molding Processes'.American Society for Composites 2019. DEStech Publications, Inc..

ALI, MA., UMER, R., KHAN, KA. and CANTWELL, WJ. (2019) 'Effect of Debulking Cycles on the Fiber Volume Fraction of 3D Fabrics for Vacuum Assisted Resin Infusion Process'.American Society for Composites 2019. DEStech Publications, Inc..