IEF
Xie, H., Li, L., Chen, T., Yu, W., Wang, X. and Zhao, H. (2013) 'Study on spark assisted compression ignition (SACI) combustion with positive valve overlap at medium–high load'. Applied Energy, 101. pp. 622 - 633. ISSN: 0306-2619
Braimah, N. (2013) 'Construction delay analysis techniques—A review of application issues and improvement needs'. Buildings, 3 (3). pp. 506 - 531.
Braimah, N. (2013) 'Approaches to delay claims assessment employed in the UK construction industry'. Buildings, 3 (3). pp. 598 - 620.
Centonza, A., Darwish, M., Kharaz, AH. and Darwish, M. (2013) 'Wavelet transform applications in active filters'. International Journal on Engineering Applications, 1 (2). pp. 137 - 143.
Lin, S., Huang, Z. and Fan, M. (2013) 'Analysis of end-plate connections at elevated temperatures'. Steel and Composite Structures, 15 (1). pp. 81 - 101. ISSN: 1229-9367
Mahmoud, MM. and Karayiannis, TG. (2013) 'Heat transfer correlation for flow boiling in small to micro tubes'. International Journal of Heat and Mass Transfer, 66. pp. 553 - 574. ISSN: 0017-9310 Open Access Link
Noureddine, H., Ni, Q., Al-Raweshidy, H. and Min, G. (2013) 'A new link lifetime estimation method for greedy and contention-based routing in mobile ad hoc networks'. Telecommunication Systems, 55 (3). pp. 1 - 13. ISSN: 1018-4864
Zhang, Y., Zhao, H., Peckham, M. and Campbell, B. (2013) 'Direct in-cylinder CO2 measurements of residual gas in a GDI engine for model validation and HCCI combustion development'. SAE Technical Papers. ISSN: 0148-7191
Zhang, Y., Zhao, H., Ojapah, M. and Cairns, A. (2013) '2-Stroke CAI Operation on a Poppet Valve DI Engine Fuelled with Gasoline and its Blends with Ethanol'. SAE Technical Paper Series, 1. ISSN: 0148-7191
Ojapah, MM., Zhang, Y. and Zhao, H. (2013) 'Analysis of gaseous and PM emissions of 4-stroke CAI/HCCI and SI combustion in a di gasoline engine'. SAE Technical Papers. ISSN: 0148-7191
Ponomareva, K. and Date, P. (2013) 'Higher order sigma point filter: A new heuristic for nonlinear time series filtering'. Applied Mathematics and Computation, 221. pp. 662 - 671. ISSN: 0096-3003 Open Access Link
Brunsting, S., de Best-Waldhober, M., Brouwer, AS., Riesch, H. and Reiner, D. (2013) 'Communicating CCS: Effects of text-only and text-and-visual depictions of CO2 storage on risk perceptions and attitudes'. Energy Procedia, 37. pp. 7318 - 7326. ISSN: 1876-6102
Zhang, Y., Zhao, H., Ojapah, M. and Cairns, A. (2013) 'CAI Combustion of Gasoline and its Mixture with Ethanol in a 2-Stroke Poppet Valve DI Gasoline Engine'. Lecture Notes in Electrical Engineering, 189 LNEE (VOL. 1). pp. 67 - 81. ISSN: 1876-1100
Rugo, D. (2013) 'Marco Ferreri: The task of cinema and the end of the world'. Journal of Italian Cinema and Media Studies, 1 (2). pp. 129 - 141. ISSN: 2047-7368 Open Access Link
Zhang, Y., Lee, C., Zhao, H., Ma, T., Feng, J., Lin, Z. and et al. (2013) 'Improvement of Fuel Economy and Vehicle Performance Through Pneumatic Regenerative Engine Braking Device (Reneged)'. Springer Berlin Heidelberg. pp. 55 - 66. ISSN: 1876-1100
Zhang, Y., Zhao, H., Peckham, M. and Campbell, B. (2013) 'Direct In-cylinder CO2 Measurements of Residual Gas in a GDI Engine for Model Validation and HCCI Combustion Development'. SAE Technical Paper Series, 1. ISSN: 0148-7191
Ojapah, MM., Zhang, Y. and Zhao, H. (2013) 'Analysis of Gaseous and PM Emissions of 4-Stroke CAI/HCCI and SI Combustion in a DI Gasoline Engine'. SAE Technical Paper Series, 1. ISSN: 0148-7191
Zhang, Y., Zhao, H., Ojapah, M. and Cairns, A. (2013) 'CAI combustion of gasoline and its mixture with ethanol in a 2-stroke poppet valve DI gasoline engine'. Fuel, 109. pp. 661 - 668. ISSN: 0016-2361
Herfatmanesh, MR., Lu, P., Attar, MA. and Zhao, H. (2013) 'Experimental investigation into the effects of two-stage injection on fuel injection quantity, combustion and emissions in a high-speed optical common rail diesel engine'. Fuel, 109. pp. 137 - 147. ISSN: 0016-2361
Di Natale, F., Carotenuto, C., D'Addio, L., Lancia, A., Antes, T., Szudyga, M., et al. (2013) 'New technologies for marine diesel engine emission control'. Chemical Engineering Transactions, 32. pp. 361 - 366. ISSN: 2283-9216
Childerhouse, P., Luo, W., Basnet, C., Ahn, HJ., Lee, H. and Vossen, G. (2013) 'Evolution of inter-firm relationships: A study of supplier-logistical services provider-customer triads'. International Journal of Industrial Engineering Theory Applications and Practice, 20 (1-2). pp. 126 - 140. ISSN: 1072-4761
Bishop, JDK., Axon, CJ., Bonilla, D., Tran, M., Banister, D. and McCulloch, MD. (2013) 'Evaluating the impact of V2G services on the degradation of batteries in PHEV and EV'. Applied Energy, 111. pp. 206 - 218. ISSN: 0306-2619
Lee, C-Y., Zhao, H. and Ma, T. (2013) 'A simple and efficient mild air hybrid engine concept and its performance analysis'. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (1). pp. 120 - 136. ISSN: 0954-4070
He, BQ., Liu, MB., Yuan, J. and Zhao, H. (2013) 'Combustion and emission characteristics of a HCCI engine fuelled with n-butanol-gasoline blends'. Fuel, 108. pp. 668 - 674. ISSN: 0016-2361
Braimah, N. (2013) 'Investigation into Health and Safety (HS) management in civil engineering laboratories'. International Journal of Engineering Research & Technology, 2 (2). ISSN: 2278-0181
Rugo, D. (2013) 'Truth After cinema: The explosion of facts in the documentary films of Jia Zhangke'. Asian Cinema, 24 (2). pp. 195 - 208. ISSN: 1059-440X Open Access Link
Jouhara, H. (2013) 'Heat pipe based cooling solutions for data centres'.6th International Conference on Sustainable Energy and Environmental Protection. Maribor, Slovenia.
Xianchao Huang., Taylor, G., Irving, M., Lizi Zhang. and Wenbin Tao. (2013) 'Service restoration of distribution systems using enhanced NDE with LCO'.2013 IEEE Power & Energy Society General Meeting. Vancouver, CANADA. IEEE. pp. 1 - 5. ISSN: 1944-9925
Madani, SH., Wissink, J. and Bahai, H. (2013) 'A comparative study of immersed-boundary interpolation methods for a flow around a stationary cylinder at low Reynolds number'.5th International Conference on Computational Methods for Coupled Problems in Science and Engineering. Santa Eulalia, SPAIN. International Center for Numerical Methods in Engineering. pp. 585 - 596.Open Access Link
Fadhl, B., Wrobel, LC. and Jouhara, H. (2013) 'Numerical modelling of the temperature distribution in a two-phase closed thermosyphon'. Applied Thermal Engineering, 60 (1-2). pp. 122 - 131. ISSN: 1359-4311 Open Access Link
Kolokotroni, M., Gowreesunker, BL. and Giridharan, R. (2013) 'Cool roof technology in London: An experimental and modelling study'. Energy and Buildings, 67. pp. 658 - 667. ISSN: 0378-7788 Open Access Link
Moghadam, MS., Darwish, M. and Marouchos, C. (2013) 'A simple drive induction motor based on buck/boost inverter topology'.UPEC2013. Dublin, IRELAND. IEEE. pp. 1 - 4.
Louvieris, P., Clewley, N. and Liu, X. (2013) 'Effects-based feature identification for network intrusion detection'. Neurocomputing. ISSN: 0925-2312
De Alvaro Garcia, L., Diwold, K., Gershinsky, G., Taylor, GA., Yunta Huete, A. and Wallom, DCH. (2013) 'High performance computing and communications technology solutions for future smart distribution network operation'.22nd International Conference and Exhibition on Electricity Distribution (CIRED 2013). Institution of Engineering and Technology. pp. 0730 - 0730.
Mohanraj, K., Paramasivam, S., Dash, SS. and Zobaa, AF. (2013) 'Open and short circuit diagnosis of a VSI fed three phase induction motor drive using fuzzy logic technique'. International Review on Modelling and Simulations, 6 (6). pp. 1858 - 1864. ISSN: 1974-9821
Shieh, JS., Chan, YT., Abbod, MF., Sun, WZ. and Wen, YR. (2013) 'Adaptive neuro-fuzzy system applied to patient-controlled analgesia analysis'. . pp. 1 - 15.
Torabi, SA., Sahebjamnia, N. and Mansouri, SA. (2013) 'Business continuity management system: A comprehensive approach to dealing with crisis in organizations'. Disaster Prevention and Management Knowledge Quarterly, 3 (1). pp. 40 - 52.
Mansouri, SA. and Torabi, SA. (2013) 'Learning from the commercial sector'. Crisis Response, 8 (4). pp. 32 - 33.
Ashton, PM., Taylor, GA., Carter, AM., Bradley, ME. and Hung, W. (2013) 'Application of phasor measurement units to estimate power system inertial frequency response'.2013 IEEE Power & Energy Society General Meeting. Vancouver, CANADA. IEEE. pp. 1 - 5. ISSN: 1944-9925
Dai, D., Fan, M. and Collins, P. (2013) 'Fabrication of nanocelluloses from hemp fibers and their application for the reinforcement of hemp fibers'. Industrial Crops and Products, 44. pp. 192 - 199. ISSN: 0926-6690
Pisica, I., Chousidis, C., Taylor, G., Tomescu, L. and Wallom, D. (2013) 'Novel information model of smart consumers for real-time home energy management'.2013 4th IEEE/PES Innovative Smart Grid Technologies Europe (ISGT EUROPE). Lyngby, DENMARK. IEEE. pp. 1-5 - 1-5. ISSN: 2165-4816
Pisica, I., Axon, CJ., Taylor, GA., Granell, R. and Wallom, DCH. (2013) 'Investigation of Data Communication Networks to Enable Demand Response and Dynamic Tariffs'.2013 IEEE International Conference on Green Computing and Communications (GreenCom) and IEEE Internet of Things(iThings) and IEEE Cyber, Physical and Social Computing(CPSCom). IEEE. pp. 320-323 - 320-323.
Tseng, L., Tang, SC., Chang, CY., Lin, YC., Abbod, MF. and Shieh, JS. (2013) 'Nonlinear and conventional biosignal analyses applied to tilt table test for evaluating autonomic nervous system and autoregulation'. The Open Biomedical Engineering Journal, 7 (1). pp. 93 - 99. ISSN: 1874-1207 Open Access Link
Sidorov, S., Date, P. and Balash, V. (2013) 'Using news analytics data in GARCH models'. Applied Econometrics (in Russian), 29 (1). pp. 82 - 96. ISSN: 1993-7601
Riesch, H., Potter, C. and Davies, L. (2013) 'Combining citizen science and public engagement: the Open Air Laboratories Programme'. Journal of Science Communication, 12 (3). pp. A03 - A03. ISSN: 1824-2049
Suresh Kumar, V., Ramela, KR. and Zobaa, AF. (2013) 'A cuk converter to improve the ride-through capability of low power adjustable speed drives for voltage sag and swell'. International Review of Electrical Engineering, 8 (4). pp. 1302 - 1310. ISSN: 1827-6660
Wei, Q., Liu, Q., Fan, S-Z., Lu, C-W., Lin, T-Y., Abbod, M. and et al. (2013) 'Analysis of EEG via Multivariate Empirical Mode Decomposition for Depth of Anesthesia Based on Sample Entropy'. Entropy, 15 (9). pp. 3458 - 3470.
Huang, J-R., Fan, S-Z., Abbod, M., Jen, K-K., Wu, J-F. and Shieh, J-S. (2013) 'Application of Multivariate Empirical Mode Decomposition and Sample Entropy in EEG Signals via Artificial Neural Networks for Interpreting Depth of Anesthesia'. Entropy, 15 (9). pp. 3325 - 3339.
Molnar, A., Weerakkody, V., El-Haddadeh, R., Lee, H. and Irani, Z. (2013) 'A Framework of Reference for Evaluating User Experience When Using High Definition Video to Video to Facilitate Public Services'. Springer Berlin Heidelberg. pp. 436 - 450. ISSN: 1868-4238
Torabi, SA., Sahebjamnia, N., Mansouri, SA. and Aramon Bajestani, M. (2013) 'A particle swarm optimization for a fuzzy multi-objective unrelated parallel machines scheduling problem'. Applied Soft Computing, 13 (12). pp. 4750 - 4762. ISSN: 1568-4946
Lee, KC., Lee, H., Lee, N. and Lim, J. (2013) 'An agent-based fuzzy cognitive map approach to the strategic marketing planning for industrial firms'. Industrial Marketing Management, 42 (4). pp. 552 - 563. ISSN: 0019-8501 Open Access Link