Al-Khwildi, AN., Khan, S., Loo, KK. and Al-Raweshidy, HS. (2007) 'On-demand link weight routing protocol with cross-layer communication'.18th IEEE International Symposium on Personal, Indoor and Mobile Radio Communication. Athens, GREECE. IEEE. pp. 904 - 908.

Freitas, W., Asada, EN., Zobaa, AF. and McConnach, JS. (2007) 'Policy and economic issues of electrical power and energy systems'. International Journal of Global Energy Issues, 27 (3). pp. 253 - 253. ISSN: 0954-7118

Shiferaw, D., Karayiannis, TG., Kenning, DBR. and ASME. (2007) 'Flow boiling in a 1.1 mm tube with R134a - Experimental results and comparison with model'. ICNMM2007: PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS. pp. 19 - 27.

García-Villalba, M., Stoesser, T., Terzi, DV., Wissink, JG., Fröhlich, J. and Rodi, W. (2007) 'Large eddy simulation of turbulent separated flow over a three-dimensional hill'.11th EUROMECH European Turbulence Conference. Univ Porto, Fac Engenharia, Oporto, PORTUGAL. 1 - 28 June. Springer Berlin Heidelberg. pp. 627 - 629. ISSN: 0930-8989

Mahfouf, M., Linkens, DA., Abbod, MF. and Talamantes-Silva, J. (2007) 'Hot Rolled Aluminium Alloys Texture via Hybrid Modelling'. Elsevier BV. pp. 437 - 442. ISSN: 1474-6670

Abbod, MF., Mahfouf, M., Linkens, DA. and Sellars, CM. (2007) 'AN EXTENDED 316L STAINLESS STEEL MODEL SUITABLE FOR INDUSTRIAL ROLLING'. Elsevier BV. pp. 305 - 310. ISSN: 1474-6670

Sanna, A., Pavlovic, E., Golobic, I., Sefiane, K., Kenning, DBR. and Karayiannis, TG. (2007) 'Critical analysis and improvement of a mechanistic multi-site model for pool nucleate boiling'.10th UK National Heat Transfer Conference. Edinburgh. [unpublished]

Tesch, K., Karayiannis, TG., Atherton, M., Collins, MW. and Edwards, P. (2007) 'Heat and mass transfer in air-fed pressurised suits'.10th UK National Heat Transfer Conference. Edinburgh. [unpublished]

Hutter, C., Sefiane, K., Walton, AJ., Karayiannis, TG. and Kenning, DBR. (2007) 'Pool boiling investigations on silicon with artificial cavities, immersed in FC-72'.10th UK National Heat Transfer Conference. Edinburgh. [unpublished]

Fan, M. (2007) 'Process for making composite products'.

Fan, M. (2007) 'Process for making composite products from fibrous waste material'.

Zobaa, AF. and Majd, A. (2007) 'Power electronics for distributed and co-generation'. International Journal of Energy Technology and Policy, 5 (2). pp. 109 - 109. ISSN: 1472-8923

Romero, R., Zobaa, AF., Asada, EN. and Freitas, W. (2007) 'Mathematical optimisation techniques applied to power system operation and planning'. International Journal of Energy Technology and Policy, 5 (4). pp. 393 - 393. ISSN: 1472-8923

Tabatabai, F. and Al-Raweshidy, HS. (2007) 'C and Ka-Band Wide Bandpass Filter Using LTCC Technology'.2007 Asia-Pacific Microwave Conference - (APMC 2007). IEEE. pp. 1116 - 1119.

Zobaa, AF. and Jovanovic, M. (2007) 'A comprehensive overview on reactive power compensation technologies for wind power applications'.12th International Power Electronics and Motion Control Conference, 2006. EPE-PEMC 2006. Portoroz, Slovenia. IEEE. pp. 1848 - 1852.

Jouhara, H. and Axcell, BP. (2007) 'An Experimental Study of Wickless Miniature Heat Pipes operating in the Range of 200 �C to 450 �C'.11 th UK National Heat Transfer Conference.  [unpublished]

Hapuarachchi, TD., Ren, G., Fan, M., Hogg, PJ. and Peijs, T. (2007) 'Fire retardancy of natural fibre reinforced sheet moulding compound'. Applied Composite Materials, 14 (4). pp. 251 - 264. ISSN: 0929-189X

Huo, Y., Tian, S. and Karayiannis, TG. (2007) 'R134a flow boiling heat transfer in small diameter tubes', in Sunden, B. and Shah, RK. (eds.) Advances in Compact Heat Exchangers. RT Edwards Inc.. pp. 95 - 111. ISBN 10: 1930217161. ISBN 13: 9781930217164. Open Access Link

Abbod, MF., Catto, JWF., Chen, M., Linkens, DA. and Hamdy, FC. (2007) 'Artificial Intelligence techniques for the prediction of bladder cancer progression'. Esann 2005 Proceedings 13th European Symposium on Artificial Neural Networks. pp. 109 - 114.

Tsolakis, A., Megaritis, A., Wyszynski, ML. and Theinnoi, K. (2007) 'Engine performance and emissions of a diesel engine operating on diesel-RME (rapeseed methyl ester) blends with EGR (exhaust gas recirculation)'. Energy, 32 (11). pp. 2072 - 2080. ISSN: 0360-5442

Yates, DR., Rehman, I., Abbod, MF., Meuth, M., Cross, SS., Linkens, DA., Hamdy, FC. and Catto, JW. et al. (2007) 'Promoter hypermethylation identifies progression risk in bladder cancer'. Clinical Cancer Research, 13 (7). pp. 2046 - 2053. ISSN: 1078-0432

Sum-Im, T., Taylor, GA., Irving, MR. and Song, YH. (2007) 'A differential evolution algorithm for multistage transmission expansion planning'.42nd International Universities Power Engineering Conference. Brighton, ENGLAND. IEEE. pp. 357 - 364.

Yoo, Y., Tuck, M., Kondakindi, R., Seo, C-Y., Dehouche, Z. and Belkacemi, K. (2007) 'Enhanced hydrogen reaction kinetics of nanostructured Mg-based composites with nanoparticle metal catalysts dispersed on supports'. Journal of Alloys and Compounds, 446-447. pp. 84 - 89. ISSN: 0925-8388

Mamon, RS. and Date, P. (2007) 'Editorial - special issue in financial mathematics'. IMA Journal of Management Mathematics, 18 (4). pp. 313 - 314. ISSN: 1471-6798

Aldelo, H., Sulaiman, TH., Casey, YK. and Al-Raweshidy, HS. (2007) 'Signalling model of service discovery in Personal Cluster'.2007 IEEE 18th International Symposium on Personal, Indoor and Mobile Radio Communications. IEEE. pp. 3273 - 3276.

Khan, S., Mahmud, SA. and Al-Raweshidy, HS. (2007) 'A cross-layer solution for dynamic selection of data-rate in WLAN using traffic differentiation'.2007 16th IST Mobile and Wireless Communications Summit. IEEE. pp. 959 - 963.

Martins, M. and Zhao, H. (2007) 'Experimental Studies of a 4-Stroke Multi-Cylinder Gasoline Engine with Controlled Auto-Ignition (CAI) Combustion'.SAE Brasil 2007 Congress and Exhibit. SAE International. ISSN: 0148-7191

Fürhapter, A. (2007) 'Four-stroke CAI engines with internal exhaust gas recirculation (EGR)', inHCCI and CAI Engines for the Automotive Industry. Elsevier. pp. 136 - 163. ISBN 13: 9781845691288.

Zhao, H. (2007) 'Preface'. Elsevier. ISSN 13: 9781845691288

Zhang, Y., He, BQ., Xie, H. and Zhao, H. (2007) 'The combustion characteristics of an HCCI engine fuelled with ethanol'. Neiranji Xuebao Transactions of CSICE Chinese Society for Internal Combustion Engines, 25 (1). pp. 30 - 36. ISSN: 1000-0909

Sterno, N., Greeves, G., Tullis, S., Jiang, X. and Zhao, H. (2007) 'Improvements of the KIVA dense spray modeling for HSDI diesel engines'. SAE Technical Papers. ISSN: 0148-7191

Coletti, F. and Macchietto, S. (2007) 'SIMPLE 3D VASCULARIZATION MODELS FOR PERFUSION BIOREACTORS'. Elsevier BV. pp. 175 - 180. ISSN: 1474-6670

Zhang, Y., Xie, H., Zhou, N., Chen, T. and Zhao, H. (2007) 'Study of SI-HCCI-SI Transition on a Port Fuel Injection Engine Equipped with 4VVAS'.SAE World Congress & Exhibition. SAE International. ISSN: 0148-7191

Cao, L., Zhao, H. and Jiang, X. (2007) 'Investigation into Controlled Auto-Ignition Combustion in a GDI Engine with Single and Split Fuel Injections'.SAE World Congress & Exhibition. SAE International. ISSN: 0148-7191

Sterno, N., Greeves, G., Tullis, S., Jiang, X. and Zhao, H. (2007) 'Improvements of the KIVA Dense Spray Modeling for HSDI Diesel Engines'.2007 Fuels and Emissions Conference. SAE International. ISSN: 0148-7191

Chaudhry, SR. and Al-Raweshidy, HS. (2007) 'An application controlled handover for heterogeneous radio in wired wireless integrated networks'.2007 16th IST Mobile and Wireless Communications Summit. IEEE. pp. 995 - 998.

Zhao, H. (2007) 'HCCI and CAI engines for the automotive industry'. Woodhead Publishing Limited. ISSN 13: 9781845691288

Zhao, H. (2007) 'Outlook and future directions in HCCI/CAI engines', inHCCI and CAI Engines for the Automotive Industry. Elsevier. pp. 507 - 509. ISBN 13: 9781845691288.

Zhao, H. (2007) 'Overview of CAI/HCCI gasoline engines', inHCCI and CAI Engines for the Automotive Industry. Elsevier. pp. 21 - 44e. ISBN 13: 9781845691288.

Zhao, H. (2007) 'Motivation, definition and history of HCCI/CAI engines', inHCCI and CAI Engines for the Automotive Industry. Elsevier. pp. 3 - 19e. ISBN 13: 9781845691288.

Li, Y., Zhao, H., Brouzos, N. and Ma, T. (2007) 'Parametric Study on CAI Combustion in a GDI Engine with an Air-Assisted Injector'.SAE World Congress & Exhibition. SAE International. ISSN: 0148-7191

Li, Y., Zhao, H. and Ma, T. (2007) 'Developing a Fuel Stratification Concept on a Spark Ignition Engines'.SAE World Congress & Exhibition. SAE International. ISSN: 0148-7191

Kolokotroni, M., Shilliday, J., Liddament, M., Santamouris, M., Farrou, I., Seppanen, O., Brown, R., Parker, J. and Guarracino, G. et al. (2007) 'Vent DisCourse: Development of educational material on energy efficient ventilation of buildings'. International Journal of Ventilation, 6 (1). pp. 61 - 67. ISSN: 1473-3315

Tabatabai, F. and Al-Raweshidy, HS. (2007) 'Linearity improvement for impulse radar ultra wideband over fiber'.2007 Asia-Pacific Microwave Conference - (APMC 2007). IEEE. pp. 743 - 746.

Tabatabai, F. and Al-Raweshidy, HS. (2007) 'Feed-Forward Linearization for Fibre Optic Application using Semiconductor Optical Amplifier'.2007 Asia-Pacific Microwave Conference - (APMC 2007). IEEE. pp. 404 - 407.

Shiferaw, J., Karayiannis, TG. and Kenning, DBR. (2006) 'Modelling issues for flow boiling of refrigerants in channels of small cross-section'.Micro and nanoscale flows: advancing the Engineering Science and Design. University of Strathclyde, Glasgow, UK. 7 - 8 December. [unpublished]

Braimah, N., Ndekugri, I. and Gameson, R. (2006) 'A review of industry standards and publications/charts for adjusting productivity losses in construction contracts'. Association of Researchers in Construction Management Arcom 2006 Procs 22nd Annual Arcom Conference. pp. 49 - 58.

Maroudas, G. and Louvieris, P. (2006) 'Exploring factors that determine consumer attitude toward use of intelligent software agents'. Proceedings of the 14th European Conference on Information Systems Ecis 2006.

Tassou, SA., Datta, D. and Grace, IN. (2006) 'Application of artificial intelligence techniques for the reduction of energy consumption of refrigeration systems'. . pp. 439 - 456.

El-Haddadeh, R., Watts, SJ. and Taylor, GA. (2006) 'NGL02-4: Charging QoS Inter-Domain Networks: IntServ over DiffServ'.IEEE Globecom 2006. San Francisco, CA. IEEE. pp. 1 - 5. ISSN: 1930-529X

Gatto, A. and Lowenberg, M. (2006) 'Evaluation of a three-degree-of-freedom test rig for stability derivative estimation'. Journal of Aircraft, 43 (6). pp. 1747 - 1762. ISSN: 0021-8669