Maidment, GG., Missenden, JF., Karayiannis, TG. and Wang, F. (2005) 'An investigation of a novel cooling system for chilled food display cabinets'. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (2). pp. 157 - 165. ISSN: 0954-4089

Lee, H., Mihailescu, P. and Shepherdson, J. (2005) 'TeamWorker: an agent-based support system for mobile task execution', in Unland, R., Calisti, M. and Klusch, M. (eds.) Software Agent-based Applications, Platforms and Development Kits. Basel, Switzerland : Birkhauser Verlag. pp. 433 - 448. ISBN 10: 3-7643-7347-4. ISBN 13: 978-3-7643-7347-4. Open Access Link

Chen, L., Tian, YS. and Karayiannis, TG. (2005) 'Vertical upward flow patterns in small diameter tubes'.6th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (ExHFT-6). Matsushima, Miyagi, Japan. 17 - 21 April.Open Access Link

Cao, L., Zhao, H., Jiang, X. and Kalian, N. (2005) 'Mixture formation and controlled auto-ignition combustion in four-stroke gasoline engines with port and direct fuel injections'. International Journal of Engine Research, 6 (4). pp. 311 - 330. ISSN: 1468-0874

Verbiezen, K., van Vliet, AP., Klein-Douwel, RJH., Ganippa, LC., Bougie, HJT., Meerts, WL., Dam, NJ. and Meulen, JJ. et al. (2005) 'Quantitative nitric oxide measurements by means of laser-induced fluorescence in a heavy-duty diesel engine'.European Combustion Meeting 2005. Louvain-la-Neuve, Belgium. 3 - 6 April. [unpublished]

Bougie, B., Ganippa, LC., van Vliet, AP., Dam, N., Meerts, WL. and ter Meulen, JJ. (2005) 'Soot characterization with laser-induced incandescence in a heavy-duty Diesel engine'."European Combustion Meeting 2005. Louvain-la-Neuve, Belgium. 3 - 6 April. [unpublished]

Assalem, A., Obayya, SSA. and Al-Raweshidy, HS. (2005) 'Full vectorial finite element analysis of semiconductor lasers'. Optics Communications, 248 (1-3). pp. 221 - 228. ISSN: 0030-4018

Zobaa, AF. (2005) 'The optimal passive filters to minimize voltage harmonic distortion at a load bus'. IEEE Transactions on Power Delivery, 20 (2). pp. 1592 - 1597. ISSN: 0885-8977 Open Access Link

Zobaa, AF. and Aziz, MMA. (2005) 'The most economical power factor correction according to tariff structures in Egypt'. IEEE Transactions on Power Delivery, 20 (2). pp. 912 - 918. ISSN: 0885-8977 Open Access Link

Grace, IN., Datta, D. and Tassou, SA. (2005) 'Sensitivity of refrigeration system performance to charge levels and parameters for on-line leak detection'. APPLIED THERMAL ENGINEERING, 25 (4). pp. 557 - 566. ISSN: 1359-4311

Dehouche, Z., Lafi, L., Grimard, N., Goyette, J. and Chahine, R. (2005) 'The catalytic effect of single-wall carbon nanotubes on the hydrogen sorption properties of sodium alanates'. Nanotechnology, 16 (4). pp. 402 - 409. ISSN: 0957-4484

Zhu, Y., Zhao, H. and Ladommatos, N. (2005) 'Computational fluid dynamics study of the effects of the re-entrant lip shape and toroidal radii of piston bowl on a high-speed direct-injection diesel engine's performance and emissions'. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219 (8). pp. 1011 - 1023. ISSN: 0954-4070

Mansouri, SA. (2005) 'Coordination of set-ups between two stages of a supply chain using multi-objective genetic algorithms'. International Journal of Production Research, 43 (15). pp. 3163 - 3180. ISSN: 0020-7543

El-Haddadeh, R. and Taylor, GA. (2005) 'A novel congestion-based pricing scheme for QoS-enabled networks'.International Conference on Security and Management (SAM'05). Las Vegas, Nevada, US. C S R E A PRESS. pp. 155 - 162.

von Berg, E., Edelbauer, W., Alajbegovic, A., Tatschi, R., Volmajer, M., Kegl, B. and Ganippa, LC. et al. (2005) 'Coupled simulations of nozzle flow, primary fuel jet break-up and spray formation'. Journal of Engineering for Gas Turbines and Power, 127 (4). pp. 897 - 908. ISSN: 0742-4795

Tassou, SA. and Grace, IN. (2005) 'Fault diagnosis and refrigerant leak detection in vapour compression refrigeration systems'. International Journal of Refrigeration, 28 (5). pp. 680 - 688. ISSN: 0140-7007

Mansouri, SA. (2005) 'A multi-objective genetic algorithm for mixed-model sequencing on JIT assembly lines'. European Journal of Operational Research, 167 (3). pp. 696 - 716. ISSN: 0377-2217

Yap, D., Megaritis, A. and Wyszynski, ML. (2005) 'An experimental study of bioethanol HCCI'. Combustion Science and Technology, 177 (11). pp. 2039 - 2068. ISSN: 0010-2202

Tsolakis, A., Hernandez, JJ., Megaritis, A. and Crampton, M. (2005) 'Dual fuel diesel engine operation using H2: effect on particulate emissions'. Energy and Fuels, 19 (2). pp. 418 - 425. ISSN: 0887-0624

Chen, L., Tian, YS. and Karayiannis, TG. (2005) 'R134a flow patterns in small-diameter tubes'. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (2). pp. 167 - 181. ISSN: 0954-4089

Westgarth-Smith, AR., Leroy, SAG., Collins, PEF. and Roy, DB. (2005) 'The North Atlantic Oscillation and UK butterfly life cycles, pigmentation, morphology, behaviour and conservation'. Antenna, 29 (3). pp. 186 - 196.

Su, WH., Lin, TJ., Zhao, H. and Pei, YQ. (2005) 'Research and development of an advanced combustion system for the direct injection diesel engine'. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219 (2). pp. 241 - 252. ISSN: 0954-4070

Somarathne, S., Seymour, M. and Kolokotroni, M. (2005) 'Dynamic thermal CFD simulation of a typical office by efficient transient solution methods'. Building and Environment, 40 (7). pp. 887 - 896. ISSN: 0360-1323

Cao, L., Zhao, H., Jiang, X. and Kalian, N. (2005) 'Understanding the infiuence of valve timings on controlled autoignition combustion in a four-stroke port fuel injection engine'. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219 (6). pp. 807 - 823. ISSN: 0954-4070

Tassou, SA. and Bansal, PK. (2005) 'Special issue on new developments in refrigeration systems'. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (2). pp. i - iii. ISSN: 0954-4089

Rueda, E., Tassou, SA. and Grace, IN. (2005) 'Fault detection and diagnosis in liquid chillers'. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (2). pp. 117 - 125. ISSN: 0954-4089

Date, P. and Cantoni, M. (2005) 'A bound on closed-loop performance based on finite- frequency response samples'. Systems and Control Letters, 54 (5). pp. 447 - 454. ISSN: 0167-6911

Nigim, KA., Zobaa, AF. and El-Amin, I. (2005) 'An introduction to reactive power compensation for wind farms'. International Journal of Energy Technology and Policy, 3 (3). pp. 185 - 195. ISSN: 1472-8923

Zobaa, AF. (2005) 'Cost-effective applications of power factor correction for nonlinear loads'. IEEE Transactions on Power Delivery, 20 (1). pp. 359 - 365. ISSN: 0885-8977 Open Access Link

Jouhara, H. and Axcell, BP. (2005) 'Film boiling heat transfer and vapour film collapse for various geometries'.11 th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-11) , Avignon, France.  [unpublished]

Jouhara, H. and Axcell, BP. (2005) 'A theoretical study of convective film boiling'.9 th UK National Heat Transfer Conference.  [unpublished]

Yim, HS., Lee, H. and Park, SJ. (2005) 'Adam: architecture-driven multi-agent systems development methods'. WSEAS Transaction Journal on Systems, 4 (10). pp. 1762 - 1767. ISSN: 1109-2777

Mihailescu, P., Lee, H. and Shepehrdson, J. (2005) 'Optimising the performance of J2ME mobile applications'. WSEAS Transaction Journal on Systems, 4 (11). pp. 1891 - 1898. ISSN: 1109-2777

Shepehrdson, J., Lee, H. and Mihailescu, P. (2005) 'Evaluation of multi-agent platforms as an enabler of enterprise mobilisation'. WSEAS Transaction Journal on Systems, 4 (11). pp. 1899 - 1905. ISSN: 1109-2777

Wang, F., Maidment, GG., Missenden, JF., Karayiannis, TG. and Bailey, C. (2005) 'Innovations in food display cabinets'. Proceedings of the Institute of Refrigeration.

Yap, D., Karlovsky, J., Megaritis, A., Wyszynski, ML. and Xu, H. (2005) 'An investigation into propane homogeneous charge compression ignition (HCCI) engine operation with residual gas trapping'. Fuel, 84 (18). pp. 2372 - 2379. ISSN: 0016-2361

Westgarth-Smith, AR., Leroy, SAG. and Collins, PEF. (2005) 'The North Atlantic Oscillation and UK butterfly populations'. Biologist, 52 (5). pp. 273 - 276. ISSN: 0006-3347 Open Access Link

Ladommatos, N., Xiao, Z. and Zhao, H. (2005) 'The effect of piston bowl temperature on diesel exhaust emissions'. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219 (3). pp. 371 - 388. ISSN: 0954-4070

Tsolakis, A. and Megaritis, A. (2005) 'Partially premixed charge compression ignition engine with on-board H2 production by exhaust gas fuel reforming of diesel and biodiesel'. International Journal of Hydrogen Energy, 30 (7). pp. 731 - 745. ISSN: 0360-3199

Tsolakis, A., Megaritis, A. and Golunski, SE. (2005) 'Reaction profiles during exhaust-assisted reforming of diesel engine fuels'. Energy and Fuels, 19 (3). pp. 744 - 752. ISSN: 0887-0624

Yap, D. and Megaritis, A. (2005) 'Applying forced induction to bioethanol HCCI operation with residual gas trapping'. Energy and Fuels, 19 (5). pp. 1812 - 1821. ISSN: 0887-0624

Westgarth-Smith, AR., Leroy, SAG., Collins, PEF. and Roy, DB. (2005) 'Mechanisms for the control of U.K. butterfly abundance by the North Atlantic Oscillation'. Antenna, 29 (4). pp. 257 - 266.

Abbod, MF., Sellars, CM., Linkens, DA., Zhu, Q. and Mahfouf, M. (2005) 'Validation and generalisation of hybrid models for flow stress and recrystallisation behaviour of aluminium–magnesium alloys'. Materials Science and Engineering A, 395 (1-2). pp. 35 - 46. ISSN: 0921-5093

Abbod, MF. and Linkens, DA. (2005) 'Application of intelligent control in medicine', in Ruano, AE. (ed.) Intelligent control systems using computational intelligence techniques. London : The Institution of Electrical Engineers. pp. 415 - 445. ISBN 10: 0-86341-489-3. ISBN 13: 9780863414893.

Li, Y., Zhao, H., Leach, B. and Ma, T. (2005) 'Development of a fuel stratification spark ignition engine'. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219 (7). pp. 923 - 934. ISSN: 0954-4070

Al-Raweshidy, H., Ali, H., Obayya, SSA., Langley, R. and Batchelor, J. (2005) 'Stress–strain modelling and analysis of a piezo-coated optical fibre sensor'. Optics Communications, 246 (4-6). pp. 357 - 366. ISSN: 0030-4018

Dehouche, Z., Savard, M., Laurencelle, F. and Goyette, J. (2005) 'Ti-V-Mn based alloys for hydrogen compression system'. Journal of Alloys and Compounds, 400 (1-2). pp. 276 - 280. ISSN: 0925-8388

Date, P. and Cantoni, M. (2005) 'On validating closed-loop behaviour from noisy frequency-response measurements'. Systems and Control Letters, 54 (6). pp. 607 - 612. ISSN: 0167-6911 Open Access Link

Dehouche, Z., Grimard, N., Laurencelle, F., Goyette, J. and Bose, TK. (2005) 'Hydride alloys properties investigations for hydrogen sorption compressor'. Journal of Alloys and Compounds, 399 (1-2). pp. 224 - 236. ISSN: 0925-8388