Moridi, A., Stewart, EJ., Wakai, A., Assadi, H., Gartner, F., Guagliano, M., Klassen, T. and Dao, M. et al. (2020) 'Solid-state additive manufacturing of porous Ti-6Al-4V by supersonic impact'. Applied Materials Today, 21. pp. 100865 - 100865. ISSN: 2352-9407 Open Access Link

Li, Z., Beslin, E., den Bakker, AJ., Scamans, G., Danaie, M., Williams, CA. and Assadi, H. et al. (2020) 'Bonding and microstructure evolution in electromagnetic pulse welding of hardenable Al alloys'. Journal of Materials Processing Technology, 290 (April 2021). pp. 1 - 14. ISSN: 0924-0136 Open Access Link

Seraj, RA., Abdollah-Zadeh, A., Assadi, H., Hajipour, H. and Kadkhodaee, M. (2020) 'Effect of substrate on the properties of cold sprayed coating of WC-10Ni'. Advances in Materials and Processing Technologies. pp. 1 - 14. ISSN: 2374-068X

Nikhbakht, R., Saadati, M., Jahazi, M., Assadi, H. and Jodoin, B. (2020) 'EBSD Analysis Enhancement of Cold Sprayed Composite Materials: Sample Preparation , Annealing, and Scan Optimization'. [Poster] Exhibited at. Microscopical Society Symposium of Canada 2 6 2020

Assadi, H. and Gärtner, F. (2020) 'Particle Compression Test: A Key Step towards Tailoring of Feedstock Powder for Cold Spraying'. Coatings, 10 (5). pp. 1 - 11.Open Access Link

Nikbakht, R., Assadi, H. and Jodoin, B. (2020) 'Intermetallic Phase Evolution of Cold-Sprayed Ni-Ti Composite Coatings: Influence of As-Sprayed Chemical Composition'. Journal of Thermal Spray Technology. ISSN: 1059-9630

Lebon, B., Li, H-T., Patel, J., Assadi, H. and Fan, Z. (2019) 'Numerical modelling of melt-conditioned direct-chill casting'. Applied Mathematical Modelling, 77 (2). pp. 1310 - 1330. ISSN: 0307-904X Open Access Link

Seraj, RA., Abdollah-zadeh, A., Dosta, S., Assadi, H. and Garcia Cano, I. (2019) 'Comparison of Stellite coatings on low carbon steel produced by CGS and HVOF spraying'. Surface and Coatings Technology, 372. pp. 299 - 311. ISSN: 1879-3347 Open Access Link

Nikbakht, R., Seyedein, SH., Kheirankish, S., Assadi, H. and Jodoin, B. (2019) 'The role of deposition sequence in cold spraying of dissimilar materials'. Surface and Coatings Technology, 367. pp. 75 - 85. ISSN: 1879-3347 Open Access Link

Assadi, H., Gaertner, F., Klassen, T. and Kreye, H. (2019) 'Comment on ‘Adiabatic shear instability is not necessary for adhesion in cold spray’'. Scripta Materialia, 162. pp. 512 - 514. ISSN: 1359-6462 Open Access Link

Seraj, RA., Abdollah-zadeh, A., Dosta, S., Canales, H., Assadi, H. and Garcia Cano, I. (2019) 'The effect of traverse speed on deposition efficiency of cold sprayed Stellite 21'. Surface and Coatings Technology, 366. pp. 24 - 34. ISSN: 1879-3347 Open Access Link

Hajipour, H., Abdollah-zadeh, A., Assadi, H., Taheri-Nassaj, E. and Jahed, H. (2018) 'Effect of Feedstock Powder Morphology on Cold-Sprayed Titanium Dioxide Coatings'. Journal of Thermal Spray Technology, 27 (8). pp. 1542 - 1550. ISSN: 1544-1016 Open Access Link

Nikbakht, R., Seyedein, SH., Kheirandish, S., Assadi, H. and Jodoin, B. (2018) 'Asymmetrical Bonding in Cold Spraying of Dissimilar Materials'. Applied Surface Science, 444 (30 June 2018). pp. 621 - 632. ISSN: 0169-4332 Open Access Link

Li, W., Assadi, H., Gaertner, F. and Yin, S. (2018) 'A Review of Advanced Composite and Nanostructured Coatings by Solid-State Cold Spraying Process'. Critical Reviews in Solid State and Materials Sciences, 44 (2). pp. 109 - 156. ISSN: 1040-8436 Open Access Link

Gao, F., Assadi, H. and Fan, Z. (2017) 'A Phase-field Study of Grain Refinement: Role of Number Density of Inoculant Particles'.6th Decennial International Conference on Solidification Processing, SP17. Windsor, UK. 1 - 28 July. 9781908549297.Open Access Link

Klassen, T., Krebs, S., Binder, K., Villa-Vidaller, M., Gaertner, F., Gartner, T. and Assadi, H. et al. (2017) 'Cold spraying for additive manufacturing and repair'.19th Chemnitz Seminar on Materials Engineering. Chemnitz Univ Technol, Inst Mat Sci & Engn, Chemnitz, GERMANY. 17 - 17 March. IOP Publishing. pp. 011002 - 011002. ISSN: 1757-8981 Open Access Link

Arabgol, Z., Villa Vidaller, M., Assadi, H., Gaertner, F. and Klassen, T. (2017) 'Influence of thermal properties and temperature of substrates on the quality of cold-sprayed deposits'. Acta Materialia, 127. pp. 287 - 301. ISSN: 1359-6454 Open Access Link

Assadi, H., Kreye, H., Gärtner, F. and Klassen, T. (2016) 'Cold spraying - A materials perspective'. Acta Materialia, 116. pp. 382 - 407. ISSN: 1359-6454 Open Access Link

Klassen, T., Gaertner, F. and Assadi, H. (2016) 'Process Science of Cold Spray', in Kay, CM. and Karthikeyan, J. (eds.) High Pressure Cold Spray Principles and Applications. pp. 17 - 66. ISBN 10: 162708097X.

Assadi, H., Gaertner, F. and Klassen, T. (2016) 'Modeling and Simulation of Cold Spray', in Kay, CM. and Karthikeyan, J. (eds.) High Pressure Cold Spray Principles and Applications. pp. 67 - 106. ISBN 10: 162708097X.

Assadi, H., Irkhin, I., Gutzmann, H., Gärtner, F., Schulze, M., Villa Vidaller, M. and Klassen, T. et al. (2015) 'Determination of plastic constitutive properties of microparticles through single particle compression'. Advanced Powder Technology, 26 (6). pp. 1544 - 1554. ISSN: 0921-8831

Hajian, M., Abdollah-zadeh, A., Rezaei-Nejad, SS., Assadi, H., Hadavi, SMM., Chung, K. and Shokouhimehr, M. et al. (2015) 'Microstructure and mechanical properties of friction stir processed AISI 316L stainless steel'. Materials and Design, 67. pp. 82 - 94. ISSN: 0261-3069

Sheikhi, M., Malek Ghaini, F. and Assadi, H. (2015) 'Prediction of solidification cracking in pulsed laser welding of 2024 aluminum alloy'. Acta Materialia, 82. pp. 491 - 502. ISSN: 1359-6454

Borchers, C., Stoltenhoff, T., Hahn, M., Schulze, M., Assadi, H., Suryanarayana, C., Gärtner, F. and Klassen, T. et al. (2015) 'Strain-induced phase transformation of MCrAlY'. Advanced Engineering Materials, 17 (5). pp. 723 - 731. ISSN: 1438-1656

Villa Vidaller, M., Haußler, F., Assadi, H., Gärtner, F. and Klassen, T. (2015) 'Influence of substrate on cold sprayed titanium coatings'. Proceedings of the International Thermal Spray Conference. pp. 1047 - 1054.

Assadi, H., Gaertner, F., Klassen, T., Heinrich, P., Kreye, H. and Kroemmer, W. (Accepted) 'Method for manufacturing diamond'.

Hajian, M., Abdollah-Zadeh, A., Rezaei-Nejad, SS., Assadi, H., Hadavi, SMM., Chung, K. and Shokouhimehr, M. et al. (2014) 'Improvement in cavitation erosion resistance of AISI 316L stainless steel by friction stir processing'. Applied Surface Science, 308. pp. 184 - 192. ISSN: 0169-4332

Sheikhi, M., Malek Ghaini, F. and Assadi, H. (2014) 'Solidification crack initiation and propagation in pulsed laser welding of wrought heat treatable aluminium alloy'. Science and Technology of Welding and Joining, 19 (3). pp. 250 - 255. ISSN: 1362-1718

Daneshian, B. and Assadi, H. (2014) 'Impact behavior of intrinsically brittle nanoparticles: A molecular dynamics perspective'. Journal of Thermal Spray Technology, 23 (3). pp. 541 - 550. ISSN: 1059-9630

Arabgol, Z., Assadi, H., Schmidt, T., Gärtner, F. and Klassen, T. (2014) 'Analysis of thermal history and residual stress in cold-sprayed coatings'.International Thermal Spray Conference (ITSC). Busan, SOUTH KOREA. 1 - 15 May. Springer Science and Business Media LLC. pp. 84 - 90. ISSN: 1059-9630

List, A., Gärtner, F., Mori, T., Schulze, M., Assadi, H., Kuroda, S. and Klassen, T. et al. (2014) 'Cold Spraying of Amorphous Cu50Zr50 Alloys'. Journal of Thermal Spray Technology, 24 (1-2). pp. 108 - 118. ISSN: 1059-9630

Raabe, D., Sandlöbes, S., Millán, J., Ponge, D., Assadi, H., Herbig, M. and Choi, PP. et al. (2013) 'Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: A pathway to ductile martensite'. Acta Materialia, 61 (16). pp. 6132 - 6152. ISSN: 1359-6454

Jabbareh, MA. and Assadi, H. (2013) 'Modeling of grain structure and heat-affected zone in laser surface melting process'. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 44 (4). pp. 1041 - 1048. ISSN: 1073-5615

Raabe, D., Ponge, D., Kirchheim, R., Assadi, H., Li, Y., Goto, S., Kostka, A., Herbig, M., Sandl, S., Kuzmina, M., Millán, J., Yuan, L. and Choi, PP. et al. (2013) 'Interface Segregation in Advanced Steels Studied at the Atomic Scale', inMicrostructural Design of Advanced Engineering Materials. Wiley-VCH Verlag GmbH & Co. KGaA. pp. 267 - 298. ISBN 13: 9783527332694.

Alidokht, SA., Abdollah-zadeh, A. and Assadi, H. (2013) 'Effect of applied load on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite'. Wear, 305 (1-2). pp. 291 - 298. ISSN: 0043-1648

Jafarzadegan, M., Abdollah-zadeh, A., Feng, AH., Saeid, T., Shen, J. and Assadi, H. (2013) 'Microstructure and Mechanical Properties of a Dissimilar Friction Stir Weld between Austenitic Stainless Steel and Low Carbon Steel'. Journal of Materials Science and Technology, 29 (4). pp. 367 - 372. ISSN: 1005-0302

Assadi, H. and Emmerich, H. (2013) 'Intelligent driving in traffic systems with partial lane discipline'. European Physical Journal B, 86 (4). ISSN: 1434-6028

Arabgol, Z., Assadi, H., Schmidt, T., Gärtner, F. and Klassen, T. (2013) 'Analysis of thermal history and residual stress in cold sprayed coatings'. Proceedings of the International Thermal Spray Conference. pp. 269 - 274.

Jafarzadegan, M., Feng, AH., Abdollah-Zadeh, A., Saeid, T., Shen, J. and Assadi, H. (2012) 'Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel'. Materials Characterization, 74. pp. 28 - 41. ISSN: 1044-5803

Nikbakht, R. and Assadi, H. (2012) 'Phase-field modelling of self-propagating high-temperature synthesis of NiAl'. Acta Materialia, 60 (10). pp. 4041 - 4053. ISSN: 1359-6454

Ojaghi-Ilkhchi, M. and Assadi, H. (2012) 'Modelling of electroreduction of porous oxides in molten salt'. Computational Materials Science, 53 (1). pp. 1 - 5. ISSN: 0927-0256

Hadi, I., Jabbareh, MA., Nikbakht, R. and Assadi, H. (2012) 'Modelling of microstructure evolution during thermal processes - A hybrid deterministic-probabilistic approach'.6th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS 2010). Guilin Univ Elect Technol, Guilin, PEOPLES R CHINA. 1 - 19 November. Trans Tech Publications, Ltd.. pp. 63 - 70. ISSN: 0255-5476

Alidokht, SA., Abdollah-Zadeh, A., Soleymani, S., Saeid, T. and Assadi, H. (2012) 'Evaluation of microstructure and wear behavior of friction stir processed cast aluminum alloy'. Materials Characterization, 63. pp. 90 - 97. ISSN: 1044-5803

Assadi, H., Schmidt, T., Richter, H., Kliemann, JO., Binder, K., Gärtner, F., Klassen, T. and Kreye, H. et al. (2011) 'On parameter selection in cold spraying'. Journal of Thermal Spray Technology, 20 (6). pp. 1161 - 1176. ISSN: 1059-9630

Alidokht, SA., Abdollah-zadeh, A., Soleymani, S. and Assadi, H. (2011) 'Microstructure and tribological performance of an aluminium alloy based hybrid composite produced by friction stir processing'. Materials and Design, 32 (5). pp. 2727 - 2733. ISSN: 0264-1275

Saeid, T., Abdollah-zadeh, A., Shibayanagi, T., Ikeuchi, K. and Assadi, H. (2010) 'On the formation of grain structure during friction stir welding of duplex stainless steel'. Materials Science and Engineering A, 527 (24-25). pp. 6484 - 6488. ISSN: 0921-5093

Saeid, T., Abdollah-Zadeh, A., Shibayanagi, T., Ikeuchi, K. and Assadi, H. (2010) 'EBSD investigation of friction stir welded duplex stainless steel'. World Academy of Science, Engineering and Technology, 61. pp. 376 - 379. ISSN: 2010-376X

Schmidt, T., Assadi, H., Gärtner, F., Richter, H., Stoltenhoff, T., Kreye, H. and Klassen, T. et al. (2009) 'Erratum: From particle acceleration to impact and bonding in cold spraying (Journal of Thermal Spray Technology DOI: 10.1007/s11666-009-9357-7)'. Journal of Thermal Spray Technology, 18 (5-6). pp. 1038. ISSN: 1059-9630

Jabbareh, MA. and Assadi, H. (2009) 'Modelling of microstructure evolution in transient-liquid-phase diffusion bonding under temperature gradient'. Scripta Materialia, 60 (9). pp. 780 - 782. ISSN: 1359-6462

Assadi, H., Oghabi, M. and Herlach, DM. (2009) 'Influence of ordering kinetics on dendritic growth morphology'. Acta Materialia, 57 (5). pp. 1639 - 1647. ISSN: 1359-6454