Dr Jinsheng Kang
Brunel University London
Fax: +44 (0) 1895 269763
Jinsheng joined Brunel Design as a Lecturer in Design in 2003. He is a Chartered Engineer (CEng), Member of IMechE, and Fellow in The Higher Education Academy. He obtained his BEng degree in Mechanical and Manufacturing Engineering in China in 1982 and his PhD degree in Mechanical Engineering in the UK in 2001. After completing his PhD, he was a Postdoctoral Research Fellow in Bournemouth University from 2001 to 2003 before he joined Brunel University London.
He was an Assistant Lecturer (1982-1986), Lecturer (1988-1993), Associate Professor (1993-1996) in the Department of Mechanical Engineering, Xinjiang Institute of Technology (Now, School of Mechanical Engineering, Xinjiang University) in China. He was an Academic Visiting Scholar in the Department of Mechanical Engineering, University of Washington, Seattle, USA from 1986 to 1988, in the Department of Manufacturing Engineering, Loughborough University, UK from 1996 to 1997, and in the Center for Human Modelling and Simulation (HMS), University of Pennsylvania, USA in summers 2008 and 2009.
BEng, PhD, CEng, MIMechE, FHEA
Research and Teaching
Human Modelling and Simulation, Virtual Human, Computer Aided Creative Conceptual Design.
Principal Investigator, The Royal Academy of Engineering, Distinguished Visiting Fellowship, for Professor John Rasmussen, Aalborg University, Denmark to visit me in November 2010, £4,000.
Principal Investigator, The Royal Academy of Engineering, Research Exchange with China and India Award, for Prof. Hongan Wang from Institute of Software, Chinese Academy of Sciences to visit me from July to August 2010, £3,000.
Principal Investigator, EPSRC Dorothy Hodgkin Postgraduate Award for Ms Jie Hong, Human Motion Modelling and Simulation, 2008-2011, £45,000.
Principal Investigator, Beijing East Culture and Art Company Limited, PhD Studentship for Ms Jie Hong, Human Motion Modelling and Simulation, 2008-2011, £45,000.
Principal Investigator, The Royal Academy of Engineering, Global Research Award, Life like virtual human for product design and environment design, for secondment at Center for Human Modelling and Simulation (HMS), University of Pennsylvania, 2008-2009, £26,000.
HEFCE SRIF 2 project, Intelligent Virtual Modelling, BRUN 07 XCT SRIF02/033, 2003-2007, £100,000. (Principal Investigator Prof. D K Wright)
Principal Investigator, BRIEF Award No. 773, 2005-2007, Modelling the Diversity of human Motion, £14,985.
Influences of Surface Quality on the Rolling Contact Fatigue Behaviour of Ceramics, funded by SKF Engineering & Research Centre B. V., The Netherlands, Oct. 1997—Oct. 2000, £24,000 (Principal Investigator Prof. Mark Hadfield).
Principal Investigator, Jigs and Fixtures Design Expert System on PC, funded by the National Natural Science Foundation of China, Grant No. 59175161, 1992 ---- 1995, RMB 45,000.
- DM2319 Dynamics, Mechanisms and Stress Analysis
- DM3601 Computer Based Design Methods
- Ms J. Hong, Human Motion Modelling and Simulation, PhD started June 2008.
- Mr K. Zhong, Real time hand gesture recognition, Visiting PhD started Sept. 2009
- Mr S. Orphanides, Generating 3D Product Design Models in Real-Time using Hand Motion and Gesture, MPhil awarded in July 2010.
- Mr Y. Zhao, Investigation of an Emotional Virtual Human Modelling Method, PhD awarded in June 2009.
- Mr B. Badi, Modelling the Diversity of Human Motion, MPhil awarded in June 2007
(2014) Hong, J., Kang, J. and Price, ME., Extraction of bodily features for gait recognition and gait attractiveness evaluation, Multimedia Tools and Applications 71 (3) : 1999- 2013 Download publication
(2013) Kang, J., Zhong, K., Qin, S., Wang, H. and Wright, D., Instant 3D design concept generation and visualization by real-time hand gesture recognition, Computers in Industry 64 (7) : 785- 797 Download publication
(2011) Price, ME., Kang, J., Dunn, J. and Hopkins, S., Muscularity and attractiveness as predictors of human egalitarianism, Personality and Individual Differences 50 (5) : 636- 640 Download publication
(2010) Zhao, Y., Kang, J. and Wright, D., Synthetic vision and memory model for virtual human - biomed 2010., Biomed Sci Instrum 46 337- 344 Download publication
(2009) Yi, X., Qin, SF. and Kang, JS., Generating 3D architectural models based on hand motion and gesture, Computers in Industry 60 (9) : 677- 685
(2007) Zhao, Y., Kang, J. and Wright, DK., Synthetic vision and emotion calculation in intelligent virtual human modeling, Biomedical Sciences Instrumentation 43 360- 365 Download publication
(2006) Zhao, Y., Kang, J. and Wright, DK., Emotion-affected decision making in human simulation, Biomedical Sciences Instrumentation 42 482- 487 Download publication
(2006) Kang, J., Badi, B., Zhao, Y. and Wright, DK., Human motion modeling and simulation by anatomical approach, WSEAS Transactions on Computing 5 (6) : 1325- 1332 Download publication
(2006) Qin, S., Wright, DK., Kang, J. and Prieto, PA., Use of 3D body motion to freeform surface design, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220 (2) : 335- 339 Download publication
(2005) Kang, J. and Hadfield, M., Examination of the material removal mechanisms during the lapping process of advanced ceramic rolling elements, Wear 258 (1-4) : 2- 12 Download publication
(2005) Qin, S., Wright, DK., Kang, J. and Prieto, PA., Incorporating 3D body motions into large-sized freeform surface conceptual design, Biomedical Sciences Instrumentation 41 271- 276 Download publication
(2005) Kang, J., Wright, DK., Qin, SF. and Zhao, Y., Modeling human behaviors and reactions under dangerous environment, Biomedical Sciences Instrumentation 41 265- 270 Download publication
(2005) Kang, J. and Hadfield, M., The effects of lapping load in finishing advanced ceramic balls on a novel eccentric lapping machine, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 219 (7) : 505- 513 Download publication
(2005) Kang, J. and Hadfield, M., The polishing process of advanced ceramic balls using a novel eccentric lapping machine, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 219 (7) : 493- 504 Download publication
(2003) Kang, J. and Hadfield, M., Comparison of four-ball and five-ball rolling contact fatigue tests on lubricated Si3N4/steel contact, Materials and Design 24 (8) : 595- 604 Download publication
(2003) Kang, J., Hadfield, M. and Ahmed, R., The effects of material combination and surface roughness in lubricated silicon nitride/steel rolling contact fatigue, Materials and Design 24 (1) : 1- 13 Download publication
(2002) Kang, J., Hadfield, M. and Tobe, S., Residual stress field of HIPed silicon nitride rolling elements, Ceramics International 28 (6) : 645- 650
(2002) Kang, J. and Hadfield, M., The influence of natural surface defects on rolling contact fatigue failure modes of HIPed Si3N4, Industrial Ceramics 22 (3) : 121- 128 Download publication
(2001) Kang, J. and Hadfield, M., A novel eccentric lapping machine for finishing advanced ceramic balls, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 215 (6) : 781- 795 Download publication
(2001) Kang, J. and Hadfield, M., Parameter optimization by Taguchi methods for finishing advanced ceramic balls using a novel eccentric lapping machine, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 215 (1) : 69- 78 Download publication
(2001) Kang, J., Hadfield, M. and Cundill, RT., Rolling contact fatigue performance of HIPed Si3N4 with different surface roughness, Ceramics International 27 (7) : 781- 794 Download publication
(2000) Kang, J. and Hadfield, M., The influence of heterogenous porosity on silicon nitride/steel wear in lubricated rolling contact, Ceramics International 26 (3) : 315- 324 Download publication
(2010) Huang, P., Kang, J., Kider, JT., Sunshine-Hill, B., McCaffrey, JB., Rios, DV. and Badler, NI., Real-Time Evacuation Simulation in Mine Interior Model of Smoke and Action, the 23rd International Conference on Computer Animation and Social Agents (CASA 2010),
(2006) Kang, J., Badi, B., Zhao, Y. and Wright, DK., Human motion modeling and simulation, 6th WSEAS International Conference on Robotics, Control and Manufacturing Technology (ROCOM '06)
(2002) Kang, J. and Hadfield, M., Surface quality and reliability of HIPed Si3N4 rolling elements, 3rd International Conference on Quality and Reliability
(1999) Kang, J. and Hadfield, M., A study on the lapping of ceramic balls, 4th International Conference on Computer Methods and Experimental Measurements for Surface Treatment Effects, Surface Treatment IV 389- 399
(1999) Kang, J. and Hadfield, M., Rolling contact failure modes of lubricated silicon nitride in relation to surface defects, 9th World Ceramics Congress and Forum on New Materials, Ceramics: Getting Into the 2000s 533-540-
(1995) Kang, J., Feng, Y. and Zhang, X., Jigs and fixture design expert system on PC, 13th ICPR, Global Frontiers in Manufacturing 453-455-
(2000) Kang, J., Hadfield, M. and Cundhill, R., The consequences of aggressive lapping processes on the surface integrity of HIP'ed silicon nitride bearing balls. In: Tribology in Environmental Design. London, UK : Professional Engineering Publishing Ltd 227- 234
(1997) Kang, J. and Weston, RH., Market driven enterprise modelling and integration. In: Managing Enterprise - Stakeholders, Engineering, Logistics and Achievement. 515- 522 Download publication