Ruslan, HN., Muthusamy, K., Mat Yahaya, F., Fauzi, MA., Ismail, MA. and Ali, Z. (2024) 'Review on performance of self compacting concrete containing solid waste and bibliometric properties: A review'. Journal of Building Engineering, 86. pp. 1 - 24. ISSN: 2352-7102

Tanash, AO., Muthusamy, K., Mat Yahaya, F. and Ismail, MA. (2023) 'Potential of recycled powder from clay Brick, sanitary Ware, and concrete waste as a cement substitute for Concrete: An overview'. Construction and Building Materials, 401. pp. 1 - 22. ISSN: 0950-0618

Kumar, R., Singh, V. and Ismail, M. (2023) 'Post-Earthquake Damage Identification of Buildings with LMSST'. Buildings, 13 (7). pp. 1 - 12.Open Access Link

Ruslan, HN., Tanash, AO., Muthusamy, K., Yang, LW. and Ismail, MA. (2023) 'Properties of Sustainable Concrete Containing Recycled Fine Aggregate as Partial Sand Replacement', in Mendonça, P., Tsukamoto, H., Chastre, C., Chastre, VV. and Jaya, RP. (eds.) Key Engineering Materials. Stafa-Zurich, Switzerland : Trans Tech Publications. , 942. pp. 129 - 135.

Soleymani, HR. and Ismail, M. (2022) 'Challenges and new trends in infrastructure life cycle cost analysis'. International Journal of Sustainable Building Technology and Urban Development, 13 (2). pp. 221 - 230. ISSN: 2093-761X Open Access Link

Jamaludin, NFA., Muthusamy, K., Md Jaafar, MF., Putra Jaya, R. and Ismail, MA. (2022) 'Performance of Palm Oil Clinker Lightweight Aggregate Concrete Comprising Spent Garnet as Fine Aggregate Replacement'. Advances in Civil Engineering, 2022. pp. 1 - 13. ISSN: 1687-8086 Open Access Link

Muthusamy, K., Jamaludin, NFA., Jaafar, MFM., Budiea, AMA. and Ismail, MA. (2022) 'Compressive Strength of Palm Oil Lightweight Aggregate Concrete Containing Industrial Waste as Partial Sand Replacement'. Materials Science Forum, 1056 MSF. pp. 55 - 60. ISSN: 0255-5476

Kumar, R., Ismail, M., Zhao, W., Noori, M., Yadav, AR., Chen, S., Singh, V., Altabey, WA., Silik, AIH., Kumar, G., Kumar, J. and Balodi, A. et al. (2021) 'Damage detection of wind turbine system based on signal processing approach: a critical review'. Clean Technologies and Environmental Policy, 23 (2). pp. 561 - 580. ISSN: 1618-954X

Meddah, MS., Al-Harthy, A. and Ismail, MA. (2020) 'Recycled concrete aggregates and their influences on performances of low and normal strength concretes'. Buildings, 10 (9). pp. 167 - 167.

Liu, S., Chen, S., Shen, C., ismail, M. and Kumar, R. (2020) 'Improved Low-Resolution Quantized SiMO Estimation via Deep Learning'. IEEE Wireless Communications Letters, 9 (8). pp. 1331 - 1335. ISSN: 2162-2337

Wan Hassan, WNF., Ismail, MA., Lee, HS., Meddah, MS., Singh, JK., Hussin, MW. and Ismail, M. et al. (2020) 'Mixture optimization of high-strength blended concrete using central composite design'. Construction and Building Materials, 243. pp. 118251 - 118251. ISSN: 0950-0618

Lee, H-S., Singh, JK., Ismail, MA., Bhattacharya, C., Seikh, AH., Alharthi, N. and Hussain, RR. et al. (2019) 'Corrosion mechanism and kinetics of Al-Zn coating deposited by arc thermal spraying process in saline solution at prolong exposure periods'. Scientific Reports, 9 (1). pp. 1 - 17. ISSN: 2045-2322 Open Access Link

Balakrishnan, B., Khalid, NHA. and Ismail, M. (2019) 'Effect of heating and cooling technique on residual compressive strength and weight loss of grout containing High volume fly ash'. IOP Publishing. pp. 012045 - 012045. ISSN: 1755-1307

Abd Khalid, NH., Abdul Rasid, NN., Mohd Sam, AR., Abdul Shukor Lim, NH., Zardasti, L., Ismail, M., Mohamed, A. and Majid, ZA. et al. (2019) 'The hydration effect on palm oil fuel ash concrete containing eggshell powder'. IOP Publishing. pp. 012047 - 012047. ISSN: 1755-1307

Awalluddin, D., Azreen Mohd Ariffin, M., Hanim Osman, M., Syahrizal Ibrahim, I., Warid Hussin, M., Ismail, MA. and Lee, HS. et al. (2019) 'Interactive buckling of structural local bamboo in Malaysia'. IOP Publishing. pp. 012036 - 012036. ISSN: 1755-1307

Rajak, MAA., Majid, ZA. and Ismail, M. (2019) 'Pozzolanic activity of nanosized palm oil fuel ash: A comparative assessment with various fineness of palm oil fuel ash'. IOP Publishing. pp. 012061 - 012061. ISSN: 1755-1307

Tang, WL., Lee, HS., Vimonsatit, V., Htut, T., Singh, JK., Hassan, WNFW., Ismail, MA., Seikh, AH. and Alharthi, N. et al. (2019) 'Optimization of micro and nano palm oil fuel ash to determine the carbonation resistance of the concrete in accelerated condition'. Materials, 12 (1). pp. 130 - 130. ISSN: 1996-1944

Ismail, MA. and Feng, CB. (2019) 'The effect of acidic environment on the concrete utilizing palm oil fuel ash'. IOP Publishing. pp. 012104 - 012104. ISSN: 1757-8981

Philip, J., Ismail, MAK. and Al-Subari, B. (2019) 'Strength and sulphate resistance of high performance concrete containing different fineness of Palm oil fuel ash'. IOP Publishing. pp. 012100 - 012100. ISSN: 1757-8981

Khalid, NHA., Rasid, NNA., Mohdsam, AR., Lim, NHAS., Ismail, M., Zardasti, L., Mohamed, A., Majid, ZA. and Ariffin, NF. et al. (2018) 'Characterization of palm oil fuel ash and eggshell powder as partial cement replacement in concrete'. IOP Publishing. pp. 032002 - 032002. ISSN: 1757-8981

Wi, K., Lee, HS., Lim, S., Song, H., Hussin, MW. and Ismail, MA. (2018) 'Use of an agricultural by-product, nano sized Palm Oil Fuel Ash as a supplementary cementitious material'. Construction and Building Materials, 183. pp. 139 - 149. ISSN: 0950-0618

Lee, HS., Kwon, SJ., Singh, JK. and Ismail, MA. (2018) 'Influence of Zn and Mg Alloying on the Corrosion Resistance Properties of Al Coating Applied by Arc Thermal Spray Process in Simulated Weather Solution'. Acta Metallurgica Sinica (English Letters), 31 (6). pp. 591 - 603. ISSN: 1006-7191

Khalid, NHA., Ismail, M., Sam, ARM., Mohamed, A., Ismail, MA., Jamellodin, Z., Salleh, N., Hamid, NAA. and Majid, MA. et al. (2018) 'Physico-Mechanical Properties of Polymer Concrete Containing Micro-Filler of Palm Oil Fuel Ash'. American Scientific Publishers. pp. 3974 - 3977. ISSN: 1936-6612

Lee, HS., Park, JH., Singh, JK. and Ismail, MA. (2018) 'Deposition of Coating to Protect Waste Water Reservoir in Acidic Solution by Arc Thermal Spray Process'. Advances in Materials Science and Engineering, 2018. pp. 1 - 13. ISSN: 1687-8434

Yang, HM., Lee, HS., Yang, KH., Ismail, MA. and Kwon, SJ. (2018) 'Time and cold joint effect on chloride diffusion in concrete containing GGBFS under various loading conditions'. Construction and Building Materials, 167. pp. 739 - 748. ISSN: 0950-0618

Meddah, MS., Ismail, MA., El-Gamal, S. and Fitriani, H. (2018) 'Performances evaluation of binary concrete designed with silica fume and metakaolin'. Construction and Building Materials, 166. pp. 400 - 412. ISSN: 0950-0618

Wi, K., Lee, HS., Lim, S., Ismail, MA. and Hussin, MW. (2018) 'Effect of using micropalm oil fuel ash as partial replacement of cement on the properties of cement mortar'. Advances in Materials Science and Engineering, 2018. pp. 1 - 8. ISSN: 1687-8434

Lim, NHAS., Samadi, M., Hussin, MW., Sam, ARM., Ariffin, NF., Ismail, MA., Lee, HS. and Ariffin, MAM. et al. (2017) 'Influence of Oil Palm Biomass Waste on Compressive Strength and Chloride Penetration of Mortar'. EDP Sciences. pp. 01008 - 01008.

Awalluddin, D., Mohd Ariffin, MA., Osman, MH., Hussin, MW., Ismail, MA., Lee, HS. and Abdul Shukor Lim, NH. et al. (2017) 'Mechanical properties of different bamboo species'. MATEC Web of Conferences, 138. pp. 01024 - 01024. ISSN: 2261-236X

Lee, HS., Choe, HB., Baek, IY., Singh, JK. and Ismail, MA. (2017) 'Study on the shielding effectiveness of an arc thermal metal spraying method against an electromagnetic pulse'. Materials, 10 (10). pp. 1 - 14. ISSN: 1996-1944 Open Access Link

Lee, BY., Ismail, MA., Kim, HJ., Yoo, SW. and Kwon, SJ. (2017) 'Numerical technique for chloride ingress with cover concrete property and time effect'. Computers and Concrete, 20 (2). pp. 185 - 196. ISSN: 1598-8198

Lee, HS., Ismail, MA., Singh, JK. and Shin, JH. (2017) 'Embedded sensor system to detect chloride permeation in concrete: an overview'. Corrosion Engineering Science and Technology, 52 (5). pp. 373 - 382. ISSN: 1478-422X

Choi, SH., Lee, HS., Choi, HK., Kim, HC., Min, TB. and Ismail, MA. (2017) 'Experimental research on development of heated form incorporating exothermic reaction powder to protect concrete in cold weather'. Construction and Building Materials, 135. pp. 30 - 36. ISSN: 0950-0618

Ryu, HS., Singh, JK., Lee, HS., Ismail, MA. and Park, WJ. (2017) 'Effect of LiNO2 inhibitor on corrosion characteristics of steel rebar in saturated Ca(OH)2 solution containing NaCl: An electrochemical study'. Construction and Building Materials, 133. pp. 387 - 396. ISSN: 0950-0618

Lee, H-S., Singh, JK. and Ismail, MA. (2017) 'An effective and novel pore sealing agent to enhance the corrosion resistance performance of Al coating in artificial ocean water'. Scientific Reports, 7 (1). pp. 1 - 22. ISSN: 2045-2322 Open Access Link

Lee, HS., Lim, HS. and Ismail, MA. (2017) 'Quantitative evaluation of free CaO in electric furnace slag using the ethylene glycol method'. Construction and Building Materials, 131. pp. 676 - 681. ISSN: 0950-0618

Lee, BY., Koh, KT., Ismail, MA., Ryu, HS. and Kwon, SJ. (2017) 'Corrosion and Strength Behaviors in Prestressed Tendon under Various Tensile Stress and Impressed Current Conditions'. Advances in Materials Science and Engineering, 2017. pp. 1 - 7. ISSN: 1687-8434

Lim, NHAS., Samadi, M., Hussin, MW., Sam, ARM., Ariffin, NF., Ismail, MA., Lee, HS. and Ariffin, MAM. et al. (2017) 'Influence of Oil Palm Biomass Waste on Compressive Strength and Chloride Penetration of Mortar'. 6TH INTERNATIONAL CONFERENCE OF EURO ASIA CIVIL ENGINEERING FORUM (EACEF 2017). ISSN: 2261-236X

Lee, HS., Park, JH., Singh, JK. and Ismail, MA. (2016) 'Protection of reinforced concrete structures of waste water treatment reservoirs with stainless steel coating using arc thermal spraying technique in acidified water'. Materials, 9 (9). pp. 753 - 753. ISSN: 1996-1944

Ryu, HS., Singh, JK., Yang, HM., Lee, HS. and Ismail, MA. (2016) 'Evaluation of corrosion resistance properties of N, N′-Dimethyl ethanolamine corrosion inhibitor in saturated Ca(OH)2 solution with different concentrations of chloride ions by electrochemical experiments'. Construction and Building Materials, 114. pp. 223 - 231. ISSN: 0950-0618

Lee, HS., Singh, JK., Ismail, MA. and Bhattacharya, C. (2016) 'Corrosion resistance properties of aluminum coating applied by arc thermal metal spray in SAE J2334 solution with exposure periods'. Metals, 6 (3). pp. 55 - 55. ISSN: 2075-4701

Khalid, NHA., Hussin, MW., Mirza, J., Ariffin, NF., Ismail, MA., Lee, HS., Mohamed, A. and Jaya, RP. et al. (2016) 'Palm oil fuel ash as potential green micro-filler in polymer concrete'. Construction and Building Materials, 102. pp. 950 - 960. ISSN: 0950-0618

Cho, HK., Lee, HS., Wang, XY., Ismail, M. and Park, WJ. (2015) 'Evaluation of CO2 emission–absorption of fly-ash-blended concrete structures using cement-hydration-based carbonation model'. Materials and Structures/Materiaux et Constructions, 48 (12). pp. 3949 - 3963. ISSN: 1359-5997

Afefy, HM., Sennah, K., Tu, S., Ismail, M. and Kianoush, R. (2015) 'Development and study of deck joints in prefabricated concrete bulb-tee bridge girders: Experimental evaluation'. Bridge Structures, 11 (1-2). pp. 55 - 71. ISSN: 1573-2487

Khalid, NHA., Hussin, MW., Ismail, M., Basar, N., Ismail, MA., Lee, HS. and Mohamed, A. et al. (2015) 'Evaluation of effectiveness of methyl methacrylate as retarder additive in polymer concrete'. Construction and Building Materials, 93. pp. 449 - 456. ISSN: 0950-0618

Lim, NHAS., Ismail, MA., Lee, HS., Hussin, MW., Sam, ARM. and Samadi, M. (2015) 'The effects of high volume nano palm oil fuel ash on microstructure properties and hydration temperature of mortar'. Construction and Building Materials, 93. pp. 29 - 34. ISSN: 0950-0618

Lee, HS., Ismail, MA. and Choe, HB. (2015) 'Arc thermal metal spray for the protection of steel structures: An overview'. Corrosion Reviews, 33 (1-2). pp. 31 - 61. ISSN: 0334-6005

Muthusamy, K., Kamaruzaman, NW., Ismail, MA. and Budiea, AMA. (2015) 'Durability performance of concrete containing laterite aggregates'. KSCE Journal of Civil Engineering, 19 (7). pp. 2217 - 2224. ISSN: 1226-7988

Ali, MKFM., Md. Noor, N., Yahaya, N., Bakar, AA. and Ismail, M. (2015) 'Effectiveness of ultraviolet light for mitigating risk of microbiologically influenced corrosion in steel pipeline'. Jurnal Teknologi, 74 (4). pp. 27 - 32. ISSN: 0127-9696

Choe, HB., Lee, HS., Ismail, MA. and Hussin, MW. (2015) 'Evaluation of electrochemical impedance properties of anti-corrosion films by Arc thermal metal spraying method'. International Journal of Electrochemical Science, 10 (11). pp. 9775 - 9789. ISSN: 1452-3981