Huang, Y. and Prangnell, PB. (2012) 'Dynamic recovery during low temperature deformation in an Al-0.1Mg Alloy'.TMS 2012 Annual Meeting & Exibition on Materials Processing Fundamentals. Orlando, USA. 11 - 15 March.

Huang, Y. (2012) 'Magnesium alloys: opportunities and challenges'.Materials Knowledge Transfer Network Annual Meeting. London, UK. 4 - 4 March. [unpublished]

Bayandorian, I., Huang, Y., Fan, Z., Pawar, S., Zhou, X. and Thompson, GE. (2012) 'The impact of melt-conditioned twin-roll casting on the downstream processing of an AZ31 magnesium alloy'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (3). pp. 1035 - 1047. ISSN: 1073-5623 Open Access Link

Lebon, GSB., Patel, MK. and Pericleous, KA. (2012) 'Investigation of instabilities arising with non-orthogonal meshes used in cell centred elliptic finite volume computations'. Journal of Algorithms and Computational Technology, 6 (1). pp. 129 - 152. ISSN: 1748-3018

Huang, Y., Wang, L., Liu, Y. and Wu, JT. (2012) 'Investigation on hot corrosion resistance of a new directional solidification superalloy at 750°C'. Dongbei Daxue Xuebao/Journal of Northeastern University, 33 (3). pp. 365 - 368. ISSN: 1005-3026

Cheng, W., Que, Z., Zhang, J., Xu, C., Liang, W. and You, B. (2012) 'Effects of Zn content on microstructure evolution and mechanical properties of indirect-extruded Mg-8Sn-Zn alloys'. Jinshu Xuebao/Acta Metallurgica Sinica, 48 (3). pp. 371 - 378. ISSN: 0412-1961

Fang, CM., Van Huis, MA., Thijsse, BJ. and Zandbergen, HW. (2012) 'Stability and crystal structures of iron carbides: A comparison between the semi-empirical modified embedded atom method and quantum-mechanical DFT calculations'. Physical Review B - Condensed Matter and Materials Physics, 85 (5). ISSN: 1098-0121

Mendis, CL., Oh-ishi, K., Ohkubo, T. and Hono, K. (2012) 'Effect of Li additions on the age hardening response and precipitate microstructures of Mg-2.4Zn-0.16Zr based alloys'. Materials Science and Engineering: A, 535. pp. 122 - 128. ISSN: 0921-5093

Li, HT., Wang, Y. and Fan, Z. (2012) 'Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al-Mg alloys'. Acta Materialia, 60 (4). pp. 1528 - 1537. ISSN: 1359-6454 Open Access Link

Ojaghi-Ilkhchi, M. and Assadi, H. (2012) 'Modelling of electroreduction of porous oxides in molten salt'. Computational Materials Science, 53 (1). pp. 1 - 5. ISSN: 0927-0256

Huang, Y. and Humphreys, FJ. (2012) 'The effect of solutes on grain boundary mobility during recrystallization and grain growth in some single-phase aluminium alloys'. Materials Chemistry and Physics, 132 (1). pp. 166 - 174. ISSN: 0254-0584

Alishahi, M., Monirvaghefi, SM., Saatchi, A. and Hosseini, SM. (2012) 'The effect of carbon nanotubes on the corrosion and tribological behavior of electroless Ni-P-CNT composite coating'. Applied Surface Science, 258 (7). pp. 2439 - 2446. ISSN: 0169-4332

Reihanian, M., Bagherpour, E. and Paydar, MH. (2012) 'Particle distribution in metal matrix composites fabricated by accumulative roll bonding'. Materials Science and Technology, 28 (1). pp. 103 - 108. ISSN: 0267-0836

Al-Helal, K., Stone, IC. and Fan, Z. (2012) 'Simultaneous Primary Si Refinement and Eutectic Modification in Hypereutectic Al-Si Alloys'. Transactions of the Indian Institute of Metals, 65 (6). pp. 1 - 5. ISSN: 0972-2815

Belov, NA., Antipov, VV., Kaibyshev, RO. and Eskin, DG. (2012) 'International conference on aluminum alloys ICAA12 - Resume of ICAA12'. Metal Science and Heat Treatment. pp. 1 - 3. ISSN: 0026-0673

Katgerman, L. and Eskin, DG. (2012) 'Structure and defect formation during DC casting of aluminium alloys'. Materials Science Forum, 710. pp. 43 - 49. ISSN: 0255-5476

Belov, NA., Antipov, VV., Kaibyshev, RO. and Eskin, DG. (2012) 'International conference on aluminum alloys ICAA12: Resume of ICAA12'. Metal Science and Heat Treatment, 53 (9-10). pp. 405 - 407. ISSN: 0026-0673

Eskin, DG. (2012) 'Recent trends in the science and technology of crystallization of aluminum alloys'. Metal Science and Heat Treatment, 53 (9-10). pp. 408 - 413. ISSN: 0026-0673

Liu, D., Zuo, Y., Meng, W., Chen, M. and Fan, Z. (2012) 'Fabrication of biodegradable nano-sized β-TCP/Mg composite by a novel melt shearing technology'. Materials Science and Engineering C, 32 (5). pp. 1253 - 1258. ISSN: 0928-4931

Zuo, YB., Jiang, B., Zhang, Y. and Fan, Z. (2012) 'Melt conditioned DC (MC-DC) casting of magnesium alloys'. Magnesium Technology. pp. 155 - 160. ISSN: 1545-4150

Bayandorian, I., Stone, I., Huang, Y. and Fan, Z. (2012) 'Twin roll casting of thin AZ31 magnesium alloy strip with uniform microstructure and chemistry'.Symposium on Magnesium Technology held during TMS Annual Meeting and Exhibition. Orlando, FL. 1 - 15 March. Springer International Publishing. pp. 135 - 140. ISSN: 1545-4150

Schenker, MC., Pourquié, MJBM., Eskin, DG. and Boersma, BJ. (2012) 'PIV quantification of the flow induced by an ultrasonic horn and numerical modeling of the flow and related processing times'. Ultrasonics Sonochemistry, 20 (1). pp. 502 - 509. ISSN: 1350-4177

Zhang, L., Subroto, T., Katgerman, L., Eskin, DG. and Miroux, A. (2012) 'Influence of melt feeding scheme and casting parameters during direct-chill casting on microstructure of an AA7050 billet'. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 43B (6). pp. 1565 - 1573. ISSN: 1073-5615 Open Access Link

Huang, Y. and Prangnell, PB. (2012) 'Dynamic recovery during low temperature deformation in an Al-0.1Mg alloy'. TMS Annual Meeting. pp. 161 - 168.

Huang, Y., Zahid, GH. and Prangnell, PB. (2012) 'Loss of high angle boundary area during annealing a cryo-SPD processed Al-alloy with a nano-scale lamellar grain structure'. Materials Science Forum, 715-716. pp. 219 - 226. ISSN: 0255-5476

Wang, Y., Li, HT. and Fan, Z. (2012) 'Oxidation of aluminium alloy melts and inoculation by oxide particles'. Transactions of the Indian Institute of Metals, 65 (6). pp. 653 - 661. ISSN: 0972-2815

Fang, CM., Van Huis, MA. and Zandbergen, HW. (2012) 'Stability and structures of the CFCC-TmC phases: A first-principles study'. Computational Materials Science, 51 (1). pp. 146 - 150. ISSN: 0927-0256

Alidokht, SA., Abdollah-Zadeh, A., Soleymani, S., Saeid, T. and Assadi, H. (2012) 'Evaluation of microstructure and wear behavior of friction stir processed cast aluminum alloy'. Materials Characterization, 63. pp. 90 - 97. ISSN: 1044-5803

Kutty, TRG., Dash, S., Banerjee, J., Kaity, S., Kumar, A. and Basak, CB. (2012) 'Thermophysical properties of U 2Mo intermetallic'. Journal of Nuclear Materials, 420 (1-3). pp. 193 - 197. ISSN: 0022-3115

Sree Manu, KM., Resmi, VG., Brahmakumar, M., Anand, N., Rajan, TPD., Pavithran, C., Pai, BC. and Manisekar, K. et al. (2012) 'Synthesis of porous SiC preform and squeeze infiltration processing of Aluminium-SiC Metal ceramic composites'. Trans Tech Publications, Ltd.. pp. 371 - 376. ISSN: 0255-5476

Sree Manu, KM., Resmi, VG., Brahmakumar, M., Narayanasamy, P., Rajan, TPD., Pavithran, C. and Pai, BC. et al. (2012) 'Squeeze infiltration processing of functionally graded aluminum-SiC metal ceramic composites'.5th International Conference on Solidification Science and Processing. Bhubaneswar, INDIA. 1 - 22 November. Springer Science and Business Media LLC. pp. 747 - 751. ISSN: 0972-2815

Yamanoǧlu, R., Karakulak, E. and Zeren, M. (2012) 'Tribological properties of vacuum hot pressed Al-Cu-Mg-SiC composites'. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012.

Karakulak, E., Yamanoǧlu, R. and Zeren, M. (2012) 'Production of silver powders by prep atomization'. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012.

Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2012) 'ROLE OF SOLUTE AND TRANSITION METALS IN GRAIN REFINEMENT OF ALUMINUM ALLOYS UNDER ULTRASONIC MELT TREATMENT'.13th International Conference on Aluminum Alloys (ICAA). Carnegie Mellon Univ, Pittsburgh, PA. 1 - 7 June. JOHN WILEY & SONS. pp. 1389 - 1394.

Satya, SJ., Kumar, V., Barekar, NS., Biswas, K. and Dhindaw, BK. (2012) 'Microstructural Evolution Under Low Shear Rates During Rheo Processing of LM25 Alloy'. Journal of Materials Engineering and Performance. pp. 1 - 7. ISSN: 1059-9495 Open Access Link

Hadi, I., Jabbareh, MA., Nikbakht, R. and Assadi, H. (2012) 'Modelling of microstructure evolution during thermal processes - A hybrid deterministic-probabilistic approach'.6th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS 2010). Guilin Univ Elect Technol, Guilin, PEOPLES R CHINA. 1 - 19 November. Trans Tech Publications, Ltd.. pp. 63 - 70. ISSN: 0255-5476

Parvin, N. and Rahimian, M. (2012) 'The characteristics of alumina particle reinforced pure Al matrix composite'.1st International Congress on Advances in Applied Physics and Materials Science (APMAS). Antalya, TURKEY. 1 - 15 May. Institute of Physics, Polish Academy of Sciences. pp. 108 - 110. ISSN: 0587-4246

Wang, Y., Li, H-T. and Fan, Z. (2012) 'Oxidation of Aluminium Alloy Melts and Inoculation by Oxide Particles'. Transactions of the Indian Institute of Metals. pp. 1 - 9. ISSN: 0972-2815

Ji, S., Watson, D., Fan, Z. and White, M. (2012) 'Development of a super ductile diecast Al-Mg-Si alloy'. Materials Science and Engineering A. ISSN: 0921-5093

Li, H-T., Wang, Y. and Fan, Z. (2012) 'Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al-Mg alloys'. Acta Materialia, 60 (4). pp. 1528 - 1537. ISSN: 1359-6454

Sundaram, K., Babu, NH., Scamans, GM., Eskin, DG. and Fan, Z. (2012) 'Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content'. International Journal of Materials Research, 103 (10). pp. 1228 - 1234.

Xia, M., Huang, Y., Cassinath, Z. and Fan, Z. (2012) 'Rheo-extrusion of AZ91D'. Solid State Phenomena, 192-193. pp. 470 - 475.

Al-Helal, K., Stone, IC. and Fan, Z. (2012) 'Simultaneous primary Si refinement and eutectic modification in hypereutectic Al-Si alloys'. Transactions of the Indian Institute of Metals, 65 (6). pp. 663 - 667. ISSN: 0972-2815

Fan, Z. (2012) 'An Epitaxial Model for Heterogeneous Nucleation on Potent Substrates'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. pp. 1 - 10. ISSN: 1073-5623

Bayandorian, I., Fan, Z., Stone, IC., Huang, Y. and Scamans, GM. (2011) 'Advances in Twin Roll Casting of Magnesium Alloys'.The John Hunt International Symposium. Brunel University, Uxbridge, UK. 12 - 14 December. Brunel Unievrsity Press. pp. 319 - 333.

Hunt, JD. and Fan, Z. (2011) 'A simple model for the nucleation and growth of equiaxed grains'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 59 - 78.

Li, H-T., Wang, Y., Zuo, Y. and Fan, Z. (2011) 'Harnessing oxides in liquid metals and alloys'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 93 - 110.

Bayandorian, I., Fan, Z., Stone, IC., Huang, Y. and Scamans, GM. (2011) 'Advances in twin roll casting of magnesium alloys'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 319 - 333.

Kumar, S., Babu, NH., Scamans, GM. and Fan, Z. (2011) 'Microstructural evaluation of melt conditioned twin roll cast Al-Mg alloy'. Materials Science and Technology, 27 (12). pp. 1833 - 1839. ISSN: 0267-0836

Holroyd, NJH. and Scamans, GM. (2011) 'Crack propagation during sustained-load cracking of Al-Zn-Mg-Cu aluminum alloys exposed to moist air or distilled water'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42 (13). pp. 3979 - 3998. ISSN: 1073-5623

Subroto, TAS., Miroux, AG., Eskin, DG. and Katgerman, L. (2011) 'Constitutive behaviour of an as-cast AA7050 alloy in the sub-solidus temperature range'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. 1 - 10 June. IOP Publishing. pp. 012074 - 012074. ISSN: 1757-8981