BCAST
View our websiteJi, S., Wan, L. and Yang, G. (1997) 'The design and development of sensors for measuring the pressure in dry sand mould (in Chinese)'. Te Zhong Zhu Zao Ji You Se He Jin/Journal of Special Casting & Nonferrous Alloys, 1997 (2). pp. 6 - 10. ISSN: 1001-2249
Fan, Z., Niu, HJ., Cantor, B., Miodownik, AP. and Saito, T. (1997) 'Effect of Cl on microstructure and mechanical properties of in situ Ti/TiB MMCs produced by a blended elemental powder metallurgy method'.Meeting of Microscopy of Composite Materials III. ST JOHNS COLLEGE, OXFORD, ENGLAND. 1 - 3 April. BLACKWELL SCIENCE LTD. pp. 157 - 167. ISSN: 0022-2720
Fang, C., de Groot, R. and Haas, C. (1997) 'Bulk and surface electronic structure of and'. Physical Review B - Condensed Matter and Materials Physics, 56 (8). pp. 4455 - 4463. ISSN: 1098-0121
Fan, Z., Grant, PS. and Cantor, B. (1997) 'Manufacture of hoop reinforced Ti-MMC rings by spray/wind process'. Key Engineering Materials, 127-131. pp. 335 - 342. ISSN: 1013-9826
Fan, Z., Niu, HJ., Miodownik, AP., Saito, T. and Cantor, B. (1997) 'Microstructure and mechanical properties of in situ Ti/TiB MMCs produced by a blended elemental powder metallurgy method'. Key Engineering Materials, 127-131. pp. 423 - 430. ISSN: 1013-9826
Boccaccini, AR. and Fan, Z. (1997) 'A new approach for the young's modulus-porosity correlation of ceramic materials'. Ceramics International, 23 (3). pp. 239 - 245. ISSN: 0272-8842
Fan, Z. (1997) 'Microstructural approach to the effective transport properties of MMCs and CMCs'. Key Engineering Materials, 127-131 (Pt 2). pp. 1207 - 1214. ISSN: 1013-9826
Fang, CM., De Groot, RA., Wiegers, GA. and Haas, C. (1997)
'Electronic structure and evidence for La vacancies in the misfit layer compound (La
Fang, CM., Wiegers, GA. and Haas, C. (1997)
'Photoelectron spectra of the late rare-earth misfit layer compounds (LnS)
Jacot, A. and Rappaz, M. (1997) 'A two-dimensional diffusion model for the prediction of phase transformations: Application to austenitization and homogenization of hypoeutectoid Fe-C steels'. Acta Materialia, 45 (2). pp. 575 - 585. ISSN: 1359-6454
Assadi, H. and Greer, AL. (1997) 'The interfacial undercooling in solidification'. Journal of Crystal Growth, 172 (1-2). pp. 249 - 258. ISSN: 0022-0248
Huang, Y. and Humphreys, FJ. (1997) 'Transient dynamic recrystallization in aluminium subjected to large reductions in strain rate'.2nd International Conference on Thermomechanical Processing of Steels and Other Materials (THERMEC 97). UNIV WOLLONGONG, WOLLONGONG, AUSTRALIA. 1 - 11 July. MINERALS, METALS & MATERIALS SOC. pp. 987 - 993.
Huang, Y. and Humphreys, FJ. (1997) 'Transient dynamic recrystallization in an aluminium alloy subjected to large reductions in strain rate'. Acta Materialia, 45 (11). pp. 4491 - 4503. ISSN: 1359-6454
Eskin, D., Pimenov, YP. and Kharakterova, ML. (1997) 'Structure and phase composition of hypereutectic silumins intended for deformation'. Rossiiskaya Akademiya Nauk. Izvestiya. Metalls. pp. 91 - 98. ISSN: 0568-5303
Kharakterova, ML., Eskin, DG. and Rokhlin, LL. (1997) 'Influence of scandium and zirconium on structure and hardening of Al-Mg-Si alloys in ageing'. Russian Academy of Sciences. Izvestiya. Metals. pp. 123 - 128. ISSN: 0568-5303
Fan, Z., Guo, ZX. and Cantor, B. (1997) 'The kinetics and mechanism of interfacial reaction in sigma fibre-reinforced Ti MMCs'. Composites Part A: Applied Science and Manufacturing, 28 (2). pp. 131 - 140. ISSN: 1359-835X
Ji, S., Li, Z., Wan, L., Deng, J. and Yang, G. (1996) 'A CAD Software for Diecasting Gate System Based on 3D Solid Modelling (in Chinese)'. China Foundry Machinery and Technology, 1996 (6). pp. 47 - 51.
Li, Z., Wei, H., Ji, S. and Yang, G. (1996) 'DCDDI software -- Study of die-casting gating CAD system (in Chinese)'. Te Zhong Zhu Zao Ji You Se He Jin/Journal of Special Casting & Nonferrous Alloys, 1996 (6). pp. 21 - 26. ISSN: 1001-2249
Boccaccini, AR. and Fan, Z. (1996) 'Comment on “Simple Mathematical Model for the Electrical Conductivity of Highly Porous Ceramics”'. Journal of the American Ceramic Society, 79 (11). pp. 2997 - 2998. ISSN: 0002-7820
Ji, S., Zhang, J. and Wan, L. (1996) 'Development of compacting equipment for lost foam process (in Chinese)'. Foundry, 1996 (10). pp. 25 - 28. ISSN: 1001-4977
Stone, IC. and Jones, H. (1996) 'Effect of cooling rate and front velocity on solidification microstructure selection in Al-3.5wt.%Fe-0 to 8.5wt.%Si alloys'. Materials Science and Engineering A, 226-228. pp. 33 - 37. ISSN: 0921-5093
Fang, CM., Wiegers, GA., Meetsma, A., De Groot, RA. and Haas, C. (1996)
'Crystal structure and band structure calculations of Pb
Fang, CM., Van Smaalen, S., Wiegers, GA., Haas, C. and De Groot, RA. (1996)
'Electronic structure of the misfit layer compound (LaS)
Fang, CM., Tolsma, PR., Van Bruggen, CF., De Groot, RA., Wiegers, GA. and Haas, C. (1996)
'Electronic structure and magnetic properties of KCrSe
Huang, Y. (1996) 'In-situ measurement of grain boundary mobility during recrystallization in an Al-0.05Si single-phase alloy by EBSD'.RMS EBSD Workshop 1996. Manchester, UK. 24 - 24 April. [unpublished]
Huang, Y. (1996) 'A novel surface treatment method for diffusion bonding of aluminium alloys'.IOM Workshop for Superplastic Forming and Diffusion Bonding. Leedsd, UK. 26 - 26 March. [unpublished]
Fang, CM., De Groot, RA., Wiegers, GA. and Haas, C. (1996)
'Electronic structure of the misfit layer compound (SnS)
Li, Z., Ji, S., Yang, G. and Wei, H. (1996) 'Application and Research of Die Casting Die CAD/CAM Technology (in Chinese)'. Special Casting and Nonferrous Alloys, 1996 (1). pp. 23 - 26. ISSN: 1001-2249
Fan, Z. (1996) 'A microstnietural approach to the effective transport properties of multiphase composites'. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 73 (6). pp. 1663 - 1684. ISSN: 0141-8610
Assadi, H. and Greer, AL. (1996) 'Development of microstructure in rapidly solidified intermetallics'.Symposium C on Thermodynamics and Kinetics of Phase Transformations, at the 1995 MRS Fall Meeting. BOSTON, MA. 1 - 1 December. MATERIALS RESEARCH SOC. pp. 75 - 80. ISSN: 0272-9172
Fan, Z. and Miodownik, AP. (1996) 'Microstructural evolution in rapidly solidified Ti-7.5 Mn-0.5 B alloy'. Acta Materialia, 44 (1). pp. 93 - 110. ISSN: 1359-6454
Fan, Z. and Boccaccini, AR. (1996) 'A new approach to the effective viscosity of suspensions'. Journal of Materials Science, 31 (10). pp. 2515 - 2521. ISSN: 0022-2461
Jacot, A., Swierkosz, M., Rappaz, J., Rappaz, M. and Mari, D. (1996) 'Modelling of electromagnetic heating, cooling and phase transformations during surface hardening of steels'. Journal De Physique. IV : JP, 6 (1). ISSN: 1155-4339
Assadi, H. and Greer, AL. (1996) 'Site-ordering effects on element partitioning during rapid solidification of alloys'. Nature, 383 (6596). pp. 150 - 152. ISSN: 0028-0836
Rappaz, M., Doré, X., Gandin, CA., Jacot, A. and Jalanti, T. (1996) 'Modelling of as-cast structures'. Materials Science Forum, 217-222 (PART 1). pp. 7 - 18. ISSN: 0255-5476
Gartner, F., Norman, AF., Assadi, H. and Greer, AL. (1996) 'Competitive phase selection in Fe-Ni alloy droplets'.Symposium C on Thermodynamics and Kinetics of Phase Transformations, at the 1995 MRS Fall Meeting. BOSTON, MA. 1 - 1 December. MATERIALS RESEARCH SOC. pp. 51 - 56. ISSN: 0272-9172
Assadi, H. and Greer, AL. (1996) 'Solidification of intermetallic compounds'.Symposium on Metastable Phases and Microstructures. BOSTON, MA. 1 - 30 November. MATERIALS RESEARCH SOC. pp. 173 - 184. ISSN: 0272-9172
Assadi, H., Barth, M., Greer, AL. and Herlach, DM. (1996)
'Microstructural development in undercooled and quenched Ni
Huang, Y. and Young, RJ. (1996) 'Interfacial micromechanics in thermoplastic and thermosetting matrix carbon fibre composites'. Composites Part A: Applied Science and Manufacturing, 27 (10). pp. 973 - 980. ISSN: 1359-835X
Eskin, DG. (1996) 'Effect of melt overheating on primary solidification in aluminium alloys'. Zeitschrift fuer Metallkunde, 87 (4). pp. 295 - 299. ISSN: 0044-3093
Rappaz, M., Desbiolles, JL., Drezet, JM., Gandin, CA., Jacot, A. and Thevoz, P. (1995) 'Application of inverse methods to the estimation of boundary conditions and properties'.7th Conference on Modeling of Casting, Welding and Advanced Solidification Processes. LONDON, ENGLAND. 1 - 15 September. MINERALS, METALS & MATERIALS SOC. pp. 449 - 457.
Rappaz, M., Gandin, CA., Jacot, A. and Charbon, C. (1995) 'Modeling of microstructure formation'.7th Conference on Modeling of Casting, Welding and Advanced Solidification Processes. LONDON, ENGLAND. 1 - 15 September. MINERALS, METALS & MATERIALS SOC. pp. 501 - 516.
Ji, S. (Accepted) 'Punching and glazing machine for semi-finished pottery'.
FANG, CM., MEETSMA, A. and WIEGERS, GA. (1995) 'ChemInform Abstract: Crystal Structure of Erbium Sesquiselenide, Er2Se3.'. ChemInform, 26 (29). ISSN: 0931-7597
Ji, S. (Accepted) 'A height control valve for lost foam process'.Open Access Link
Ji, S., Gao, J. and Huang, C. (1995) 'Drilling and glazing machine for porcelain products'.
Gao, J., Ye, S., Ji, S. and Zhang, J. (1995) 'Centrifugal coating spraying device for casting'.
Zhang, J., Ji, S. and Yang, G. (1995) 'Charing pail'.
Fan, Z., Chandrasekaran, L., Ward-Close, CM. and Miodownik, AP. (1995) 'The effect of pre-consolidation heat treatment on TiB morphology and mechanical properties of rapidly solidified Ti-6Al-4V-XB alloys'. Scripta Metallurgica et Materiala, 32 (6). pp. 833 - 838. ISSN: 0956-716X
Gopalan, R., Roy, T., Rajasekharan, T., Rangarajan, G. and Hari Babu, N. (1995) 'Microstructural and magnetisation study in melt-grown YBaCuO samples'. Physica C: Superconductivity and its applications, 244 (1-2). pp. 106 - 114. ISSN: 0921-4534
Fang, CM., Meetsma, A. and Wiegers, GA. (1995)
'Crystal structure of erbium sesquiselenide, Er