Zmorayová, K., Šefčíková, M., Diko, P., Babu, NH. and Cardwell, DA. (2004) 'New pinning centres in YBCO bulk supreconductors with depleted uranium addition'. Czechoslovak Journal of Physics, 54 (SUPPL. 4). pp. 469 - 472. ISSN: 0011-4626

Sefcikova, M., Zmorayová, K., Diko, P., Babu, NH. and Cardwell, DA. (2004) 'Nanosized pinning centers in YBCO bulk superconductors with complex alloying'. Czechoslovak Journal of Physics, 54 (SUPPL. 4). pp. 473 - 476. ISSN: 0011-4626

Ji, S., Liu, G., Zhang, E. and Fan, Z. (2004) 'Development of the rheo-diecasting process for Mg- alloys and their components'. Limassol, Cyprus. 1 Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004. pp. 285 - 290.

Campbell, AM., Loram, JW., Hari-Babu, N., Cooper, JR. and Cardwell, DA. (2004) 'Reversible magnetization of a strong-pinning superconductor'. Physical Review B - Condensed Matter and Materials Physics, 70 (21). pp. 1 - 6. ISSN: 1098-0121

Pandit, H., Mishra, A., Babu, NH., He, P., Isfort, D., Chaud, X., Ferendeci, AM., Cardwell, DA., Tournier, R., Mast, D. and Shi, D. et al. (2004) 'RF property characterization of single domain YBa 2Cu 3O x'. Materials Research Society Symposium Proceedings. pp. 181 - 183. ISSN: 0272-9172

Fan, Z., Ji, S. and Fang, X. (2004) 'Rheo-diecasting of aluminium alloys and components'. Limassol, Cyprus. 1 Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004. pp. 111 - 120.

Li, YQ., Fang, CM., De With, G. and Hintzen, HT. (2004) 'Preparation, structure and photoluminescence properties of Eu ²⁺ and Ce ³⁺-doped SrYSi 4N 7'. Journal of Solid State Chemistry, 177 (12). pp. 4687 - 4694. ISSN: 0022-4596

Fang, CM., Hintzen, HT. and De With, G. (2004) 'High-pressure phases of MgSiN2 from first-principles calculations'. Applied Physics A: Materials Science and Processing, 78 (5). pp. 717 - 719. ISSN: 0947-8396

Suyitno., Savran, VI., Katgerman, L. and Eskin, DG. (2004) 'Effects of alloy composition and casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys'. Metallurgical and Materials Transactions A, 35 (11). pp. 3551 - 3561. ISSN: 1073-5623

Eskin, DG., Zuidema, J., Savran, VI. and Katgerman, L. (2004) 'Structure formation and macrosegregation under different process conditions during DC casting'. Materials Science and Engineering: A, 384 (1-2). pp. 232 - 244. ISSN: 0921-5093

Cizek, P., McKay, BJ. and Lozano-Perez, S. (2004) 'Investigation of the interfaces between boride particles and aluminium in the as-received and re-melted Ti-B-Al grain refiner master alloy'.Institute-of-Physics-Electron-Microscopy and Analysis-Group Conference (EMAG 2003). Univ Oxford, Examinat Sch, Oxford, ENGLAND. 19 - 5 September. IOP PUBLISHING LTD. pp. 429 - 432. ISSN: 0951-3248

El Mubarek, HAW., Bonar, JM., Dilliway, GD., Ashburn, P., Karunaratne, M., Willoughby, AF., Wang, Y., Hemment, PLF., Price, R., Zhang, J. and Ward, P. et al. (2004) 'Effect of fluorine implantation dose on boron thermal diffusion in silicon'. Journal of Applied Physics, 96 (8). pp. 4114 - 4121. ISSN: 0021-8979

Cardwell, DA., Murakami, M., Zeisberger, M., Gawalek, W., Gonzalez-Arrabal, R., Eisterer, M., Weber, HW., Fuchs, G., Krabbes, G., Leenders, A., Freyhardt, HC., Chaud, X., Tournier, R. and Babu, NH. et al. (2004) 'Round robin measurements of the flux trapping properties of melt processed Sm-Ba-Cu-O bulk superconductors'. Physica C: Superconductivity and its Applications, 412-414 (SPEC. ISS.). pp. 623 - 632. ISSN: 0921-4534

Zhang, T., Men, H. and Ti, Y. (2004) 'Formation and mechanical properties of Cu-Zr-Ti bulk glassy alloys'. Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 30 (10). pp. 925 - 929. ISSN: 1001-5965

Fan, Z., Ji, S. and Liu, G. (2004) 'Development of the rheo-diecasting process for Mg-alloys'.International Conference on Magnesium - Science, Technology and Applications. Beijing, Peoples Republic of China. 20 - 24 September. Trans Tech Publications, Ltd.. pp. 405 - 411. ISSN: 0255-5476

Stangeland, A., Mo, A. and Eskin, D. (2004) 'Constitutive equation for thermal strain in the mushy zone during solidification of aluminium alloys'.Solidification and Gravity. Miskolc. 6 - 9 September. TRANS TECH PUBLICATIONS LTD. pp. 343 - 348. ISSN: 0255-5476

Cantor, B., Audebert, F., Galano, M., Kim, K-B., Stone, IC. and Warren, PJ. (2004) 'Novel multicomponent alloys'. Journal of Metastable and Nanocrystalline Materials, 24-25. pp. 1 - 6. ISSN: 1422-6375

Bate, PS., Huang, Y. and Humphreys, FJ. (2004) 'Development of the "brass" texture component during the hot deformation of Al-6Cu-0.4Zr'. Acta Materialia, 52 (14). pp. 4281 - 4289. ISSN: 1359-6454

Eskin, GI. and Eskin, DG. (2004) 'Some control mechanisms of spatial solidification in light alloys'. International Journal of Materials Research, 95 (8). pp. 682 - 690. ISSN: 1862-5282 Open Access Link

Basak, CB. and Sengupta, AK. (2004) 'Development of a FDM based code to determine the 3-D size distribution of homogeneously dispersed spherical second phase from microstructure: A case study on nodular cast iron'. Scripta Materialia, 51 (3). pp. 255 - 260. ISSN: 1359-6462

Huang, Y., Ridley, N. and Humphreys, FJ. (2004) 'Evolution of microstructure during the hot plane strain compression of an as-cast Al-Cu-Zr alloy'.Euro-SPF 04. Albi, France. 14 - 15 July.

Jacot, A. and Du, Q. (2004) 'A 2-dimensional model coupled to a thermodynamic database for the prediction of solidification microstructures in multi-component alloys'.Symposium on Solidification Processes and Microstructures in Honor of Wilfried Kurz held at the TMS Annual Meeting. Charlotte, NC. 14 - 18 March. MINERALS, METALS & MATERIALS SOC. pp. 405 - 411.

Mokadem, S., Bezençon, C., Drezet, JM., Jacot, A., Wagnière, JD. and Kurz, W. (2004) 'Microstructure control during single crystal laser welding and deposition of Ni-base superalloys'.Symposium on Solidification Processes and Microstructures in Honor of Wilfried Kurz held at the TMS Annual Meeting. Charlotte, NC. 14 - 18 March. MINERALS, METALS & MATERIALS SOC. pp. 67 - 76.

Rappaz, M., Grasso, PD., Mathier, V., Drezet, JM. and Jacot, A. (2004) 'How does coalescence of dendrite arms or grains influence hot tearing?'.Symposium on Solidification of Aluminum Alloys held at the TMS 2004 Annual Meeting. Charlotte, NC. 13 - 18 March. MINERALS, METALS & MATERIALS SOC. pp. 179 - 190.

Smit, MA., Hunter, JA., Sharman, JDB., Scamans, GM. and Sykes, JM. (2004) 'Effects of thermal and mechanical treatments on a titanium-based conversion coating for aluminium alloys'. Corrosion Science, 46 (7). pp. 1713 - 1727. ISSN: 0010-938X

Men, H., Kim, WT. and Kim, DH. (2004) 'Glass formation and crystallization behavior in Mg65Cu 25Y10-xGdx (x = 0, 5 and 10) alloys'. Journal of Non-Crystalline Solids, 337 (1). pp. 29 - 35. ISSN: 0022-3093

Eskin, DG., Suyitno. and Katgerman, L. (2004) 'Mechanical properties in the semi-solid state and hot tearing of aluminium alloys'. Progress in Materials Science, 49 (5). pp. 629 - 711. ISSN: 0079-6425

Fang, CM. and De Wijs, GA. (2004) 'Lattice vibrations and thermal properties of carbon nitride with defect ZnS structure from first-principles calculations'. Journal of Physics Condensed Matter, 16 (18). pp. 3027 - 3034. ISSN: 0953-8984

Mathier, V., Jacot, A. and Rappaz, M. (2004) 'Coalescence of equiaxed grains during solidification'. Modelling and Simulation in Materials Science and Engineering, 12 (3). pp. 479 - 490. ISSN: 0965-0393

Fang, CM. and Metselaar, R. (2004) 'First-principles calculations of the stability and local structure of α-sialon ceramics on the line Si3N4-1/2Ca 3N2:3AlN'. Journal of Physics Condensed Matter, 16 (16). pp. 2931 - 2939. ISSN: 0953-8984

Eskin, DG., Katgerman, L., Suyitno. and Mooney, JF. (2004) 'Contraction of aluminum alloys during and after solidification'. Metallurgical and Materials Transactions A, 35 (4). pp. 1325 - 1335. ISSN: 1073-5623

Gili, E., Kunz, VD., De Groot, CH., Uchino, T., Ashburn, P., Donaghy, DC., Hall, S., Wang, Y. and Hemment, PLF. et al. (2004) 'Single, double and surround gate vertical MOSFETs with reduced parasitic capacitance'. Solid-State Electronics, 48 (4). pp. 511 - 519. ISSN: 0038-1101

Burman, E., Jacot, A. and Picasso, M. (2004) 'Adaptive finite elements with high aspect ratio for the computation of coalescence using a phase-field model'. Journal of Computational Physics, 195 (1). pp. 153 - 174. ISSN: 0021-9991

Park, S-B., Stone, I. and Cantor, B. (2004) 'Rheocasting of aluminum alloys'.Symposium on Solidification of Aluminum Alloys held at the TMS 2004 Annual Meeting. Charlotte, NC. 14 - 18 March. MINERALS, METALS & MATERIALS SOC. pp. 257 - 266.

McKay, BJ. and Schumacher, P. (2004) 'An investigative study of si poisoning in al-si alloys using the metallic glass technique'.Symposium on Solidification of Aluminum Alloys held at the TMS 2004 Annual Meeting. Charlotte, NC. 14 - 18 March. MINERALS, METALS & MATERIALS SOC. pp. 157 - 166.

Suyitno., Eskin, D. and Katgerman, L. (2004) 'Effect of casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys'.TMS Annual Meeting. Charlotte. 14 - 18 March. TMS. pp. 47 - 52.

Ambat, R., Davenport, AJ., Afseth, A. and Scamans, G. (2004) 'Electrochemical Behavior of the Active Surface Layer on Rolled Aluminum Alloy Sheet'. Journal of the Electrochemical Society, 151 (2). pp. B53 - B53. ISSN: 0013-4651

Sengupta, AK., Basak, CB., Jarvis, T., Bhagat, RK., Pandey, VD. and Majumdar, S. (2004) 'Effect of titania addition on hot hardness of UO2'. Journal of Nuclear Materials, 325 (2-3). pp. 141 - 147. ISSN: 0022-3115

Mishra, AK., Babu, HH., He, P., Isfort, D., Chaud, X., Ferendeci, AM., Cardwell, DA., Tournier, R., Mast, D. and Shi, D. et al. (2004) 'Surface resistance measurements of single domain YBa2Cu 3Ox'. Physica C: Superconductivity and its Applications, 402 (3). pp. 277 - 282. ISSN: 0921-4534

Huang, Y. (2004) 'In situ observations of microstructural evolution during deformation of Supral 100'. Materials Science Forum, 447-448. pp. 381 - 386. ISSN: 0255-5476

Nygård, K., Huotari, S., Hämäläinen, K., Manninen, S., Buslaps, T., Hari Babu, N., Kambara, M. and Cardwell, DA. et al. (2004) 'Temperature dependence of MgB2 Compton profiles'. Physical Review B - Condensed Matter and Materials Physics, 69 (2). ISSN: 1098-0121

Liu, YQ., Das, A. and Fan, Z. (2004) 'Thermodynamic predictions of Mg-Al-M (M = Zn, Mn, Si) alloy compositions amenable to semisolid metal processing'. Materials Science and Technology, 20 (1). pp. 35 - 41. ISSN: 0267-0836

Cantor, B., Dunne, FPE. and Stone, IC. (2004) 'Metal and ceramic matrix composites'. Institute of Physics, Taylor & Francis. ISSN 10: 0750308729 ISSN 13: 9780750308724

Diko, P., Zmorayová, K., Hari Babu, N., Krabbes, G. and Cardwell, DA. (2004) 'The influence of the addition of depleted uranium on particle pushing in melt-processed, bulk Y-Ba-Cu-O'. Superconductor Science and Technology, 17 (1). pp. 186 - 193. ISSN: 0953-2048

Reddy, ES., Babu, NH., Shi, Y. and Cardwell, DA. (2004) 'The existence of a highly undercooled state during the formation of Y2BaCuO5 in large grain Y-Ba-Cu-O superconductors'. Superconductor Science and Technology, 17 (1). pp. L1 - L5. ISSN: 0953-2048

Belov, NA., Alabin, AN. and Eskin, DG. (2004) 'Improving the properties of cold-rolled Al-6%Ni sheets by alloying and heat treatment'. Scripta Materialia, 50 (1). pp. 89 - 94. ISSN: 1359-6462

Tang, H., Wrobel, LC. and Fan, Z. (2004) 'Tracking of immiscible interfaces in multiple-material mixing processes'. Computational Materials Science, 29 (1). pp. 103 - 118. ISSN: 0927-0256

Das, A. and Fan, Z. (2004) 'A Monte Carlo simulation of solidification structure formation under melt shearing'. Materials Science and Engineering A, 365 (1-2). pp. 330 - 335. ISSN: 0921-5093

Tang, H., Wrobel, LC. and Fan, Z. (2004) 'Numerical evaluation of immiscible metallic Zn-Pb binary alloys in shear-induced turbulent flow'. Materials Science and Engineering A, 365 (1-2). pp. 325 - 329. ISSN: 0921-5093

Tang, H., Anjorin, VAO., Morgan, AJ., Wrobel, LC., Barton, IE. and Fan, Z. (2004) 'Numerical and experimental investigation of the morphology development of expansion clouds by a powder jet flow'. Fire Safety Journal, 39 (7). pp. 601 - 617. ISSN: 0379-7112 Open Access Link

Suyitno, A., Eskin, DG., Savran, VI. and Katgerman, L. (2004) 'Effects of alloy composition and casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 35 A (11). pp. 3551 - 3561. ISSN: 1073-5623