Talluri, VSSLP., Tleuova, A., Hosseini, S. and Vopicka, O. (2020) 'Selective separation of 1-butanol from aqueous solution through pervaporation using PTSMP-silica nano hybrid membrane'. Membranes, 10 (4). pp. 55 - 55. ISSN: 2077-0375

Que, Z., Wang, Y. and Fan, Z. (2020) 'Heterogeneous Nucleation of Eutectic Structure in Al-Mg-Si Alloys'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (6). pp. 2697 - 2702. ISSN: 1073-5623 Open Access Link

Afifi, MA., Wang, YC. and Langdon, TG. (2020) 'Effect of dynamic plastic deformation on the microstructure and mechanical properties of an Al–Zn–Mg alloy'. Materials Science and Engineering A, 784. pp. 1 - x. ISSN: 0921-5093 Open Access Link

Souissi, M., Sluiter, MHF., Matsunaga, T., Tabuchi, M., Mills, MJ. and Sahara, R. (2020) 'Direct observation and modeling of growth-induced stacking fault in chromium-rich γ-M23C6 carbides'. Scripta Materialia, 178. pp. 290 - 294. ISSN: 1359-6462

Saeedipour, S., Kermanpur, A. and Sadeghi, F. (2020) 'Effect of N addition on microstructure refinement and high temperature mechanical properties of Ti–46Al–8Ta (at. %) intermetallic alloy'. Journal of Alloys and Compounds, 817. pp. 152749 - 152749. ISSN: 0925-8388

Zeng, G., Shuai, SS., Zhu, XZ., Ji, SX., Xian, JW. and Gourlay, CM. (2020) 'Al8Mn5 in High-Pressure Die Cast AZ91: Twinning, Morphology and Size Distributions'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (5). pp. 2523 - 2535. ISSN: 1073-5623 Open Access Link

Fang, C., Mohammodi, V., Nihtianov, S. and Sluiter, M. (2020) 'Stability, geometry and electronic properties of BH_n (n = 0 to 3) radicals on the Si{0 0 1}3×1:H surface from first-principles'. Journal of Physics: Condensed Matter, 32 (23). pp. 1 - 10. ISSN: 0953-8984 Open Access Link

Rezvani, A., Bagherpour, E. and Ebrahimi, R. (2020) 'Circular Simple Shear Extrusion as an Alternative to Simple Shear Extrusion Technique'. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 44 (1). pp. 193 - 201. ISSN: 2228-6187

Shurkin, PK., Belov, NA., Musin, AF. and Aksenov, AA. (2020) 'Novel High-Strength Casting Al−Zn−Mg−Ca−Fe Aluminum Alloy without Heat Treatment'. Russian Journal of Non-Ferrous Metals, 61 (2). pp. 179 - 187. ISSN: 1067-8212

Luan, Q. and Jiang, J. (Accepted) 'How Would the Deformation Bands Affect Recrystallization in Pure Aluminium?'. SSRN Electronic Journal.

Zhou, M., Cardoso, RP., Bahai, H. and Usmani, A. (2020) 'A thermo-mechanical analysis of stainless steel structures in fire'. Engineering Structures, 210 (1). pp. 1 - 19. ISSN: 0141-0296 Open Access Link

Venditti, S., Eskin, D. and Jacot, A. (2020) 'Fractional Solidification for Purification of Recycled Aluminium Alloys'.149th TMS Annual Meeting and Exhibition: Light Metals Symposium 2020. San Diego, CA, USA. 23 - 27 February. Springer International Publishing. pp. 1110 - 1118. ISSN: 2367-1181

Subroto, T., Eskin, DG., Beckwith, C., Tzanakis, I., Djambazov, G. and Pericleous, K. (2020) 'Improving Ultrasonic Melt Treatment Efficiency Through Flow Management: Acoustic Pressure Measurements and Numerical Simulations'.149th TMS Annual Meeting and Exhibition: Light Metals 2020 Symposium. San Diego, CA, USA. 23 - 27 February. Springer International Publishing. pp. 981 - 987. ISSN: 2367-1181

Razavi, M. and Huang, Y. (2020) 'Effect of hydroxyapatite (HA) nanoparticles shape on biodegradation of Mg/HA nanocomposites processed by high shear solidification/equal channel angular extrusion route'. Materials Letters, 267. pp. 1 - 6. ISSN: 0167-577X

Khan, MA., Wang, Y., Yasin, G., Nazeer, F., Malik, A., Ahmad, T., Khan, WQ., Nguyen, TA., Zhang, H. and Afifi, MA. et al. (2020) 'Adiabatic shear band localization in an Al–Zn–Mg–Cu alloy under high strain rate compression'. Journal of Materials Research and Technology, 9 (3). pp. 3977 - 3983. ISSN: 2238-7854 Open Access Link

Lordan, E., Lazaro Nebreda, J., Zhang, Y., Dou, K., Blake, P. and Fan, Z. (2020) 'On the relationship between internal porosity and the tensile ductility of aluminium alloy die-castings'. Materials Science and Engineering A, 778 (19 March 2020). pp. 1 - 10. ISSN: 0921-5093 Open Access Link

Pérez-Prado, MT., Bohlen, J., Yi, S., Letzig, D., Al-Samman, T., Robson, J., Barnett, M., Poole, W., Mendis, C., Agnew, S. and Stanford, N. et al. (2020) 'Emerging Hot Topics and Research Questions in Wrought Magnesium Alloy Development'. JOM, 72 (7). pp. 1 - 1. ISSN: 1047-4838

Chankitmunkong, S., Eskin, D. and Limmaneevichitr, C. (2020) 'Structure modification upon ultrasonic processing of an AA4032 piston alloy: comparison of permanent mold and direct-chill casting'. Metallurgical and Materials Transactions A, 51A (February). pp. 818 - 821. ISSN: 1073-5623 Open Access Link

Shurkin, PK., Belov, NA., Musin, AF. and Samoshina, ME. (2020) 'Effect of Calcium and Silicon on the Character of Solidification and Strengthening of the Al–8% Zn–3% Mg Alloy'. Physics of Metals and Metallography, 121 (2). pp. 135 - 142. ISSN: 0031-918X

Priyadarshi, A., Subroto, T., Conte, M., Pericelous, K., Eskin, D., Prentice, P. and Tzanakis, I. et al. (2020) 'Nanoindentation and Cavitation-Induced Fragmentation Study of Primary Al3Zr Intermetallics Formed in Al Alloys'.Light Metals Symposium held at the 149th Annual Meeting and Exhibition, TMS 2020. San Diego; United States. 28 - 27 February. Springer International Publishing. pp. 168 - 173. ISSN: 2367-1181 Open Access Link

Zhu, X. and Ji, S. (2020) 'The Formation of Al6(Fe, Mn) Phase in Die-Cast Al–Mg Alloys'.TMS 2020. San Diego. 28 - 27 February. Springer International Publishing. pp. 297 - 300. ISSN: 2367-1181 Open Access Link

Huang, Y. (2020) 'Coarsening-Resistance of a Severely Deformed Al-0.2 wt% Sc Alloy'.Light Metals symposia at the TMS Annual Meeting & Exhibition. San Diego, California, USA. 28 - 27 February. Springer International Publishing. pp. 272 - 276. ISSN: 2367-1181

Liu, G., Blake, P. and Ji, S. (2020) 'High Cycle Fatigue Properties of the Zr-Modified Al–Si–Cu–Mg Alloy at Elevated Temperatures'.TMS 2020. San Diego, Cal., USA. 28 - 28 February. Springer International Publishing. pp. 253 - 260. ISSN: 2367-1181 Open Access Link

Dong, X., Nyberg, EA. and Ji, S. (2020) 'A Die-Cast Magnesium Alloy for Applications at Elevated Temperatures'.Magnesium Technology Symposium held during the 149th TMS Annual Meeting & Exhibition. San Diego, CA, USA. 23 - 27 February. Springer International Publishing. pp. 31 - 36. ISSN: 2367-1181 Open Access Link

Ji, S. and Amirkhanlou, S. (2020) 'A review on high stiffness aluminium-based composites and bimetallics'. Critical Reviews in Solid State and Materials Sciences, 45 (1). pp. 1 - 12. ISSN: 1040-8436 Open Access Link

Buzolin, RH., Volovitch, P., Maltseva, A., Lamaka, S., Blawert, C., Mendis, CL., Lohmüller, A., Kainer, KU. and Hort, N. et al. (2020) 'Thixomolded AZ91D and MRI153M magnesium alloys and their enhanced corrosion resistance'. Materials and Corrosion, 71 (3). pp. 339 - 351. ISSN: 0947-5117 Open Access Link

Niu, Z. and Cheng, K. (2020) 'Improved dynamic cutting force modelling in micro milling of metal matrix composites Part I: Theoretical model and simulations'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234 (9). pp. 1733 - 1745. ISSN: 0954-4062

Yang, X., Barekar, NS., Ji, S., Dhindaw, BK. and Fan, Z. (2020) 'Influence of reinforcing particle distribution on the casting characteristics of Al-SiCp composites'. Journal of Materials Processing Technology, 279. pp. 1 - 10. ISSN: 0924-0136 Open Access Link

Chankitmunkong, S., Eskin, D. and Limmaneevichitr, C. (2020) 'Constitutive behavior of an AA4032 piston alloy with Cu and Er additions upon high temperature compressive deformation'. Metallurgical and Materials Transactions A, 51A (January). pp. 467 - 481. ISSN: 1543-1940 Open Access Link

Shurkin, P., Akopyan, T., Prosviryakov, A., Komissarov, A. and Korotkova, N. (2020) 'Single track scanning experiment on the hypereutectic aluminium alloy Al-8%Zn-7%Ni-3%Mg'. MATEC Web of Conferences, 326. pp. 07001 - 07001. ISSN: 2261-236X

Anguilano, L., Minton, T., McKay, B. and Uka, J. (2019) 'Methods to re-use and recycle aluminum machining swarf'. Evolutions in Mechanical Engineering. ISSN: 2640-9690 Open Access Link

Wang, C., Connolley, T., Tzanakis, I., Eskin, D. and Mi, J. (2019) 'Characterization of Ultrasonic Bubble Clouds in A Liquid Metal by Synchrotron X-ray High Speed Imaging and Statistical Analysis'. Materials, 13 (1). pp. 1 - 12. ISSN: 1996-1944 Open Access Link

Liu, F., Zhu, X. and Ji, S. (2019) 'Effects of Ni on the microstructure, hot tear and mechanical properties of Al–Zn–Mg–Cu alloys under as-cast condition'. Journal of Alloys and Compounds, 821. pp. 153458 - 153458. ISSN: 0925-8388 Open Access Link

Niu, Z. and Cheng, K. (2019) 'Improved dynamic cutting force modelling in micro milling of metal matrix composites part II: Experimental validation and prediction'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234 (8). pp. 1500 - 1515. ISSN: 0954-4062

Fang, CM. and Fan, Z. (2019) 'Prenucleation at the Interface Between MgO and Liquid Magnesium: An Ab Initio Molecular Dynamics Study'. Metallurgical and Materials Transactions A, 51 (2). pp. 788 - 797. ISSN: 1073-5623 Open Access Link

Diculescu, VC., Beregoi, M., Evanghelidis, A., Negrea, RF., Apostol, NG. and Enculescu, I. (2019) 'Palladium/palladium oxide coated electrospun fibers for wearable sweat pH-sensors'. Scientific Reports, 9 (1). pp. 8902. ISSN: 2045-2322

Boni, GA., Chirila, CF., Hrib, L., Negrea, R., Filip, LD., Pintilie, I. and Pintilie, L. et al. (2019) 'Low value for the static background dielectric constant in epitaxial PZT thin films'. Scientific Reports, 9 (1). pp. 14698. ISSN: 2045-2322

Niu, Z. and Cheng, K. (2019) 'Investigation on the material removal and surface roughness in ultraprecision machining of Al/B4C/50p metal matrix composites'. International Journal of Advanced Manufacturing Technology, 105 (7-8). pp. 2815 - 2831. ISSN: 0268-3768 Open Access Link

Cai, Q., Mendis, CL., Chang, ITH. and Fan, Z. (2019) 'Microstructure evolution and mechanical properties of new die-cast Al-Si-Mg-Mn alloys'. Materials and Design, 187. pp. 108394 - 108394. ISSN: 0264-1275 Open Access Link

Zhou, M., Jiang, L., Chen, S., Cardoso, RPR. and Usmani, A. (2019) 'Remaining fire resistance of steel frames following a moderate earthquake – A case study'. Journal of Constructional Steel Research, 164. pp. 105754 - 105754. ISSN: 0143-974X

Dong, X., Youssef, HY., Zhang, Y., Yang, H., Wang, S. and Ji, S. (2019) 'Advanced heat treated die-cast aluminium composites fabricated by TiB2 nanoparticle implantation'. Materials and Design, 186 (15 January 2020). pp. 1 - 13. ISSN: 0264-1275 Open Access Link

Wang, YC., Afifi, MA., Cheng, X., Li, S. and Langdon, TG. (2019) 'An Evaluation of the Microstructure and Microhardness in an Al–Zn–Mg Alloy Processed by ECAP and Post-ECAP Heat Treatments'. Advanced Engineering Materials, 22 (1). pp. 1 - 8. ISSN: 1438-1656 Open Access Link

Gu, YC., Peng, GS., Song, GS., Huang, J., Wang, Y. and Chen, SY. (2019) 'Comparative studies of grain refinement of commercial purity Mg by CaO and Ca addition'. International Journal of Cast Metals Research, 32 (5-6). pp. 295 - 303. ISSN: 1364-0461

Wang, J. and Scamans, G. (2019) 'A simple measurement system for optimization of auto aluminum body sheet coil cleaning lines'. Light Metal Age, 77 (6). pp. 6 - 10. ISSN: 0024-3345

Sree Manu, KM., Ajay Raag, L., Rajan, TPD., Pai, BC., Petley, V. and Verma, SN. (2019) 'Self-lubricating bidirectional carbon fiber reinforced smart aluminum composites by squeeze infiltration process'. Journal of Materials Science and Technology, 35 (11). pp. 2559 - 2569. ISSN: 1005-0302

Khan, MA., Wang, Y., Afifi, MA., Malik, A., Nazeer, F., Yasin, G., Jiawei, B. and Zhang, H. et al. (2019) 'Microstructure and mechanical properties of an Al-Zn-Cu-Mg alloy processed by hot forming processes followed by heat treatments'. Materials Characterization, 157. pp. 109901 - 109901. ISSN: 1044-5803

Bolzoni, L. and Hari Babu, N. (2019) 'On the grain refining efficacy of Ti-free hypoeutectic AlSi via AlTiB, AlB and AlNbB chemical inoculation'. Journal of Alloys and Compounds, 817. pp. 1 - 9. ISSN: 0925-8388 Open Access Link

Balart, M., Hao, X., Marks, S., West, GD. and Davis, CL. (2019) 'Automated SEM/EDS Analysis for Assessment of Contamination and Non-Metallic Inclusions of Powders and Additive Manufactured Inconel 718 Alloy'.Euro PM2019. Maastricht, The Netherlands. 13 - 16 October. Euro PM2019 Proceedings.Open Access Link

Lebon, B., Tzanakis, I., Pericleous, K. and Eskin, D. (2019) 'Numerical modelling of the ultrasonic treatment of aluminium melts: An overview of recent advances'. Materials, 12 (19). pp. 3262 - 3262. ISSN: 1996-1944 Open Access Link

Bozoni, L. and Hari Babu, N. (2019) 'Towards industrial Al-Nb-B master alloys for grain refining Al-Si alloys'. Journal of Materials Research and Technology, 8 (6). pp. 5631 - 5638. ISSN: 2238-7854 Open Access Link

Bagherpour, E., Mortezaei, S., Ebrahimi, R., Miyamoto, H. and Qods, F. (2019) 'On the Production of Severely Deformed Workpieces in Large Scales: A Step Towards Industrialization'. JOM, 71 (12). pp. 4424 - 4435. ISSN: 1047-4838 Open Access Link