Lian, H., Shi, ZM., Yu, W., Wang, Y., Wang, W. and Pang, N. (2026) 'Improvement of microstructure and mechanical property of Al–2Fe alloy though an in-situ reaction of Fe2O3 powder in Al–Mg melts'. Journal of Materials Research and Technology, 41. pp. 1630 - 1643. ISSN: 2238-7854

Niu, Z., Zhou, X., Hou, P., Liu, M., Liang, S., Sun, Y., Zhao, Y. and Wang, J. et al. (2026) 'Nano CaCO₃ seeding for improving properties of limestone calcined clay cement through in-situ carbonation'. Cement and Concrete Composites, 0 (in press, pre-proof). pp. 1 - 29. ISSN: 0958-9465 Open Access Link

Yang, X., Hari Babu, N. and Fang, C. (2026) 'Ultrahigh strength magnesium via solidification of nanocolloid'. Nature Communications, 0 (in submission). pp. 1 - 28.Open Access Link

Gunasekaran, SS., Bagherpour, E., Tzileroglou, C., Mendis, C. and Barbatti, C. (2026) 'Thermo-mechanical simulation of microstructure and texture evolution in flat-strip extrusion of Al–Mg–Si-Cu alloy'. Materials and Design, 0 (accepted, in press). pp. 1 - 19. ISSN: 0264-1275 Open Access Link

Nassar, A., Al-Sairfi, H., Cochrane, R., Abul, MR., Teggin, L., Al-Jenabi, O., Myro, E. and Mullis, A. et al. (2026) 'Achieving Single Solid Solution in Equimolar AlCrCuFeNi via Rapid Solidification'. Materials Today Communications, 0 (in press, pre-proof). pp. 1 - 24. ISSN: 2352-4928 Open Access Link

Eskin, DG., Tzanakis, I., Pericleous, K. and Mi, J. (2026) 'Advanced techniques to reveal the underlying physics of ultrasonic processing'. Ultrasonics Sonochemistry, 0 (in press, pre-proof). pp. 1 - 3. ISSN: 1350-4177 Open Access Link

Guo, D., Zhu, C., Chapman, HE., Zhang, K., Li, W., Bhagavath, S., Atwood, R., Michalik, S., Eskin, DG., Tzanakis, I., Leung, CLA. and Lee, PD. et al. (2026) 'Mechanical and in situ thermal-related behavior during directed energy deposition additive manufacturing of a high-performance Al alloy'. International Journal of Extreme Manufacturing, 8 (3). pp. 1 - 15. ISSN: 2631-8644 Open Access Link

Liu, M., Niu, Z., Zhou, X., Hou, P., Hai, R., Liang, S. and Sun, Y. et al. (2026) 'Synergistic effects of triethanolamine and nano-SiO₂ on the hydration and hardening properties of Limestone calcined clay cement'. Cement and Concrete Composites, 168. pp. 1 - 13. ISSN: 0958-9465 Open Access Link

Que, Z., Negrea, RF. and Fan, Z. (2026) 'Nanoscale Fe-Containing Intermetallic Formation in Al-Fe-Mn-Si Alloys: Unveiling a Rare Explosive Nucleation Pathway under Liquid Confinement'. Materials Today Communications, 0 (in press, pre-proof). pp. 1 - 24. ISSN: 2352-4928 Open Access Link

Que, Z. and Fan, Z. (2026) 'Nucleation control strategy for sustainable aluminium: Improving Fe removal efficiency or increasing Fe-tolerance'. Journal of Materials Research and Technology, 40. pp. 2820 - 2832. ISSN: 2238-7854 Open Access Link

Wang, A., Yang, Z., Zhu, M., Wen, T., Wang, J., Dong, X., Wang, Y., Ji, S. and Yang, H. et al. (2026) 'An additively manufactured heat-resistant L12-hardened CoCrNi-based medium-entropy composite achieved by a thermal stable cellular-nanoparticle architectural structure'. Journal of Alloys and Compounds, 1051. pp. 185913 - 185913. ISSN: 0925-8388

Liu, Q., Zhang, G., Ni, D., Dong, X., Zhang, C., Li, S., Sun, J., Yang, H. and Ji, S. et al. (2026) 'Effects of Cu content and natural ageing on microstructure and mechanical properties of Tesla-based Al7Si0.3Mg0.3Fe heat treatment-free die-cast alloys'. Journal of Alloys and Compounds, 1052. pp. 186172 - 186172. ISSN: 0925-8388

Zhu, M., Wang, J., Wen, T., Qiu, D., Liu, Z., Ji, S., Wang, Y., Dong, X., Yang, H. and Easton, MA. et al. (2026) 'Strength-ductility synergy high performance and thermal resistant TiB2/Al-Mg-Yb-Zr alloy prepared by additive manufacturing'. Materials Science and Engineering: A, 950. pp. 149482 - 149482. ISSN: 0921-5093

Zhang, H., Zai, L., Wang, Y. and Xue, X. (2026) 'Unveiling the hot cracking mechanism in Ti2AlNb-based alloys during fusion welding'. Materials Letters, 403. pp. 139400 - 139400. ISSN: 0167-577X

Xiang, K., Qin, L., Huang, S., Song, H., Bazhenov, V., Bellucci, V., Birnšteinová, S., de Wijn, R., Koliyadu, JCP., Koua, FHM., Round, A., Round, E., Sarma, A., Sato, T., Sikorski, M., Zhang, Y., Asimakopoulou, EM., Villanueva-Perez, P., Porfyrakis, K., Tzanakis, I., Eskin, DG., Grobert, N., Mancuso, AP., Bean, R., Vagovič, P. and Mi, J. et al. (2025) 'Ultrasonic cavitation shock wave exfoliation dynamics of 2D materials revealed in situ by MHz XFEL imaging and multiphysics modeling'. Science Advances, 11 (48). pp. 1 - 10. ISSN: 2375-2548 Open Access Link

Rao, B., Wang, Z., Rao, W., Que, Z., Li, F., Wang, J. and Gao, W. et al. (2025) 'Seismic Performance of T-Shaped Aluminum Alloy Beam–Column Bolted Connections: Parametric Analysis and Design Implications Based on a Mixed Hardening Model'. Buildings, 15 (23). pp. 1 - 24.Open Access Link

Zhu, C., Guo, D., Leung, CLA., Tzanakis, I., Lee, PD. and Eskin, D. (2025) 'Design of hot-tearing resistant and thermally stable aluminium alloys for advanced casting technologies'. Materials and Design, 260. pp. 1 - 11. ISSN: 0264-1275 Open Access Link

Esmati, R., Hosseini, SA., Salehi, RH., Hosseini, S. and Alishahi, M. (2025) 'Electrocatalytic water splitting of Ni–Mo/CNT nanocomposite coating developed by ultrasonic-assisted electrodeposition'. International Journal of Hydrogen Energy, 194. pp. 152242 - 152242. ISSN: 0360-3199

Li, N., Wang, Q., Ji, S., Yin, S., Guo, N., Niu, W. and Shao, Y. et al. (2025) 'Deformation-driven precipitate evolution in cold sprayed age-hardenable aluminum alloys'. Applied Surface Science, 718 (15 February 2026). pp. 1 - 8. ISSN: 0169-4332 Open Access Link

Tian, X., Jiang, F., Xu, C., Shen, C., Dai, Z., Duan, J., Cai, X., Liu, L., Wang, Y., Xu, M. and Yi, J. et al. (2025) 'Synergistic effects of deep cryogenic treatment and aging on microstructure and mechanical properties of (FeCoNi)86Al7Ti7 high-entropy alloy'. Journal of Materials Science, 60 (40). pp. 19249 - 19266. ISSN: 0022-2461

Wu, H., Song, X., Lu, J., Dou, K., Wang, W., Zhang, Y. and Fan, Z. et al. (2025) 'A machine learning method for predicting the elongation to failure of Al–Si alloy in high pressure die casting combining experiment and modeling'. Journal of Materials Research and Technology, 39. pp. 2621 - 2632. ISSN: 2238-7854 Open Access Link

Alizadeh, A., Souissi, M., Zhou, M. and Assadi, H. (2025) 'Gradient-Based Calibration of a Precipitation Hardening Model for 6xxx Series Aluminium Alloys'. Metals, 15 (9). pp. 1 - 25.Open Access Link

(Accepted) 'Future Star of Metallurgy'. .

Najafi, A., Reihanian, M., Bagherpour, E., Mendis, CL., Mazaheri, Y., Botkin, A., Valiev, RZ. and Ebrahimi, R. et al. (2025) 'Tailoring microstructure and mechanical behavior of Mg-1Zn-0.2Ca alloy through Hot Extrusion with a Cosine-Profile Die'. Materials Today Communications, 49. pp. 1 - 11. ISSN: 2352-4928

Que, Z., Wang, Y., Fan, Z., Negrea, RF., Zhou, X. and Ramasse, Q. (2025) 'Interfacial Segregation of Fe and Si on TiB2 Surface and Refinement of Fe-Bearing Intermetallic Compounds and Primary Si Part I: Segregation Phenomenon and Formation of Two-Dimensional Compounds (2DCs) at the Al/TiB2 Interface'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 56 (11). pp. 5209 - 5225. ISSN: 1073-5623 Open Access Link

Que, Z., Wang, Y., Fan, Z. and Zhou, X. (2025) 'Interfacial segregation of Fe and Si on TiB2 surface and refinement of Fe-bearing intermetallic compounds and primary Si : Part II Refinement of primary Fe-intermetallic compounds and primary Si through manipulating nucleation potency of TiB2 particles'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 946. pp. 1 - 15. ISSN: 0921-5093 Open Access Link

Lazaro Nebreda, J., Karakulak, E., Shurkin, P. and Scamans, G. (2025) 'Low-Pressure Die Casting of Aluminium Alloy Components for Electric Vehicle Battery Enclosures'. IOP Conference Series: Materials Science and Engineering, 1335 (1). pp. 1 - 8. ISSN: 1757-8981 Open Access Link

Zhang, H., Zai, L., Wang, Y. and Xue, X. (2025) 'Insight into microstructural evolution and mechanical property correlations of Ti2AlNb-based alloy fabricated through wire arc additive manufacturing'. Materials Science and Engineering: A, 938. pp. 148477 - 148477. ISSN: 0921-5093

Wang, Z., Shang, Y., Lu, K., Chen, Z., Wang, D., Hao, C., Hu, C., Zeng, R., Xu, Z. and Que, Z. et al. (2025) 'A novel fabrication of Al-based high-entropy alloy with ultra-high hardness via usage of recycled aluminum'. Materials Characterization, 228. pp. 1 - 16. ISSN: 1044-5803

Vivekanandam, V., Joshi, SS., Lazaro Nebreda, J. and Fan, Z. (2025) 'Effect of Processing-Induced Oxides on the Fatigue Life Variability of 6082 Al-Mg-Si Alloy Extruded Components'. Journal of Manufacturing and Materials Processing, 9 (7). pp. 1 - 12.Open Access Link

Priyadarshi, A., Kaur, A., Khavari, M., Morton, JA., Tyurnina, AV., Ghorbani, M., Prentice, P., Mi, J., Pericleous, K., Lee, PD., Eskin, D. and Tzanakis, I. et al. (2025) 'Role of shock waves in materials processing: Fundamentals and Applications'. Ultrasonics Sonochemistry, 120. pp. 1 - 27. ISSN: 1350-4177 Open Access Link

Behjat, A., Shamanian, M., Sadeghi, F., Mosallanejad, MH. and Saboori, A. (2025) 'Process-Driven Structural and Property Evolution in Laser Powder Bed Fusion of a Newly Developed AISI 316L Stainless Steel'. Materials, 18 (14). pp. 1 - 22. ISSN: 1996-1944 Open Access Link

Wang, H., Su, L., Bagherpour, E. and Xing, Q. (2025) 'Characterization and Modelling of the Deformation and Failure of Engineering Metallic Materials'. Crystals, 15 (7). pp. 1 - 5.Open Access Link

Tangsuksan, T., Pandee, P., Diewwanit, O., Limmaneevichitr, C., Tyurnina, AV., Eskin, DG. and Chankitmunkong, S. et al. (2025) 'Enhancing the properties of a hypereutectic Al-Fe alloy through recycled aluminum scrap and ultrasonic melt processing'. Materials Characterization, 228. pp. 1 - 16. ISSN: 1044-5803

Zhu, M., Wang, J., Wen, T., He, Z., Dong, X., Qiu, D., Ji, S., Wang, Y. and Yang, H. et al. (2025) 'Processability improvement and strength enhancement in laser powder bed fusion of AlMgZr and AlMgZr-Ti alloys'. Virtual and Physical Prototyping, 20 (1). pp. 1 - 16. ISSN: 1745-2759 Open Access Link

Keerti, S., Yang, X. and Hari Babu, N. (2025) 'A generic Hall-Petch relationship in metallic materials with varied grain morphology'. Materials Science and Engineering: A, 943. pp. 1 - 13. ISSN: 0921-5093 Open Access Link

Xu, C., Jiang, F., Tian, X., Dai, Z., Duan, J., Cai, X., Liu, L., Wang, Y., Xu, M. and Yi, J. et al. (2025) 'Comprehensive investigation of aging treatments on microstructure and mechanical properties of (FeCoNi)86Al7Ti7 high-entropy alloy'. Journal of Alloys and Compounds, 1036. pp. 181856 - 181856. ISSN: 0925-8388

Dai, Z., Shen, C., Wang, Y., Xu, C., Tian, X., Xu, M. and Yi, J. et al. (2025) 'Designing Ti ZrNbMoV refractory high entropy alloys with improved properties by reducing intermetallic compound and dendritic segregation'. Journal of Alloys and Compounds, 1036. pp. 181913 - 181913. ISSN: 0925-8388

Fang, C., Que, Z. and Fan, Z. (2025) 'Stability, Chemical Composition, and Structural and Electronic Properties of the Intermetallic Compound τ4-(Al1-xSix)5Fe'. Journal of Alloys and Compounds, 1037. pp. 1 - 9. ISSN: 0925-8388 Open Access Link

Famelton, JR., Williams, CA., Barbatti, C., Bagot, PAJ. and Moody, MP. (2025) 'The role of solute clusters in the nucleation of precipitates in Al–Mg–Si–Cu alloys'. Materialia, 42. pp. 1 - 9. ISSN: 2589-1529 Open Access Link

Qin, L., Xiang, K., Eskin, D., Li, L., Tzanakis, I. and Mi, J. (2025) 'An integrated numerical modelling framework for simulation of the multiphysics in sonoprocessing of materials'. Ultrasonics Sonochemistry, 120. pp. 1 - 11. ISSN: 1350-4177 Open Access Link

Sun, J., Dong, X., Li, S., Yang, H. and Ji, S. (2025) 'Effects of composition and natural ageing on microstructure and mechanical properties of Al-Mg-Si heat treatment-free die-cast alloys assisted with machine learning'. Materials Today Communications, 47. pp. 1 - 17. ISSN: 2352-4928

Sharma, D., Roebuck, B., Joshi, SS., de Oliveira Leo, JR., Sharma, R., Ameen, A., Paul, S., Fabijanic, D. and Fitzpatrick, ME. et al. (2025) 'Nature of phase transformations in metastable β-Ti alloy: An in situ study on Ti–5Al–5Mo–5V–3Cr alloy'. Journal of Alloys and Compounds, 1034. pp. 181407 - 181407. ISSN: 0925-8388

Chen, Q., Fang, C., Naraghi, R., Selleby, M. and Ågren, J. (2025) 'Thermodynamic Modeling of Metastable and Transition Carbides in the Fe-C System'.52nd International Conference on Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD LII). Busan, Korea. 25 - 30 May.Open Access Link

Han, Q., Dong, X., Liu, Q., Yang, H. and Ji, S. (2025) 'Effect of prolonged natural ageing on microstructure and tensile properties of a high strength die-cast Al-Mg-Si-Zn alloy'. Journal of Alloys and Compounds, 1032. pp. 1 - 11. ISSN: 0925-8388 Open Access Link

Que, Z., Fang, C. and Fan, Z. (2025) 'Nucleation competition and phase transformation mechanisms in recycled aluminium alloys : Insights into θ-Al13Fe4, Al6(Fe,Mn) and α-Al15(Fe,Mn)3Si2'. Journal of Alloys and Compounds, 1032. pp. 1 - 12. ISSN: 0925-8388 Open Access Link

Tiwari, T., Mendis, C. and Eskin, D. (2025) 'Facilitating Recycling of 6xxx Series Aluminum Alloys by Machine Learning-Based Optimization'. Journal of Sustainable Metallurgy, 11 (3). pp. 2323 - 2334. ISSN: 2199-3823 Open Access Link

Rezvani, A., Ebrahimi, R. and Bagherpour, E. (2025) 'Phase-Field Simulation of the Creep Mechanism in the AZ31 Magnesium Alloy Under Discontinuous Dynamic Recrystallization Dominance'. Crystals, 15 (5). pp. 1 - 13.Open Access Link

Kaur, A., Babaliari, E., Bolanos-Garcia, VM., Kefalogianni, M., Psilodimitrakopoulos, S., Kavatzikidou, P., Ranella, A., Ghorbani, M., Stratakis, E., Eskin, DG. and Tzanakis, I. et al. (2025) 'Assessment of aqueous graphene as a cancer therapeutics delivery system'. Scientific Reports, 15 (1). pp. 1 - 10. ISSN: 2045-2322 Open Access Link

Zargar, T., Sadeghi, F., Mousavi, T., Planat, S., Öğüt, S., Huang, Y. and Langdon, TG. et al. (2025) 'Characterization of Cu-Nb-Cu heterostructure fabricated by high-pressure torsion'. Journal of Alloys and Compounds, 1029. pp. 1 - 10. ISSN: 0925-8388 Open Access Link