Eskin, D., Wang, F., Connolley, T. and Mi, J. (2016) 'Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al-0.4Ti alloy'. Journal of Crystal Growth, 435. pp. 24 - 30. ISSN: 1873-5002 Open Access Link

Burugapalli, K., Razavi, M., Zhou, L. and Huang, Y. (2016) 'In Vitro Cytocompatibility Study of a Medical beta -Type Ti-35.5Nb-5.7Ta Titanium Alloy'. Journal of Biomaterials and Tissue Engineering, 6 (2). pp. 141 - 148. ISSN: 2157-9091 Open Access Link

Holroyd, H. and Scamans, GM. (2016) 'Sensitization, Intergranular Corrosion, and Environment-Induced Cracking of Aluminum-Magnesium Alloys'. CORROSION, 72 (2). pp. 135 - 135. ISSN: 0010-9312

Holroyd, NJH. and Scamans, GM. (2016) 'Editorial: Sensitization, intergranular corrosion, and environment-induced cracking of aluminum-magnesium alloys'. Corrosion, 72 (2). pp. 135. ISSN: 0010-9312

Kang, B., Feng, Q., Summers, C., Fang, CM., Adhikari, R. and Biswas, K. (2016) 'Emerging New Pseudobinary and Ternary Halides as Scintillators for Radiation Detection'. IEEE Transactions on Nuclear Science, 64 (7). pp. 1817 - 1824. ISSN: 0018-9499 Open Access Link

Ingale, SV., Wagh, PB., Sastry, PU., Basak, CB., Bandyopadhyay, D., Phapale, SB. and Gupta, SC. et al. (2016) 'Studies on impact sensitivity of nanosized trinitrotoluene (TNT) confined in silica processed by sol-gel method'. Defence Technology, 12 (1). pp. 46 - 51. ISSN: 2214-9147

Lu, L., Hou, L-G., Zhang, J-X., Wang, H-B., Cui, H., Huang, J-F., Zhang, Y-A. and Zhang, J-S. et al. (2016) 'Microstructure characteristics of spray-formed high speed steel and its evolution during subsequent hot deformation'. Journal of Materials Research, 31 (2). pp. 274 - 280. ISSN: 0884-2914

Nadendla, H. (2016) 'A trapped magnetic field of 3T in homogeneous, bulk MgB2 superconductors fabricated by a Modified Precursor Infiltration and Growth (MPIG) process'. Superconductor Science and Technology, 29 (3). pp. 035008 - 035008. ISSN: 1361-6668 Open Access Link

Leese, RJ., Ivanov, A. and Babu-Nadendla, H. (2016) 'The Potential to Machine Superconductors with Electrochemical Machining'. Journal of Multiscale Modelling, 07 (01). pp. 1640001 - 1640001. ISSN: 1756-9737

Fang, CM. and Biswas, K. (2016) 'Quaternary Iodides A(BaSr)I 5 :Eu 2+ (A = K, Cs) as Scintillators for Radiation Detection'. The Journal of Physical Chemistry C, 120 (2). pp. 1225 - 1236. ISSN: 1932-7447

Tzanakis, I., Hodnett, M., Lebon, GSB., Dezhkunov, N. and Eskin, DG. (2016) 'Calibration and performance assessment of an innovative high-temperature cavitometer'. Sensors and Actuators, A: Physical, 240 (1 April 2016). pp. 57 - 69. ISSN: 0924-4247 Open Access Link

Razavi, M., Burugapalli, K., Zhou, L. and Huang, Y. (2016) 'Human embryonic kidney cell behaviour on a new β-type titanium alloy by Alamar Blue assay'.Annual Conference and Expo on Biomaterials. Crowne Plaza London-Heathrow, London, UK.

Tzanakis, I., Lebon, GSB., Eskin, D. and Pericleous, KA. (2016) 'Characterisation of the ultrasonic acoustic spectrum and pressure field in aluminium melt with an advanced cavitometer'. Journal of Materials Processing Technology, 229. pp. 582 - 586. ISSN: 1873-4774 Open Access Link

Assadi, H., Gaertner, F. and Klassen, T. (2016) 'Modeling and Simulation of Cold Spray', in Kay, CM. and Karthikeyan, J. (eds.) High Pressure Cold Spray Principles and Applications. pp. 67 - 106. ISBN 10: 162708097X.

Srinivasan, A., Dieringa, H., Mendis, CL., Huang, Y., Rajesh Kumar, R., Kainer, KU. and Hort, N. et al. (2016) 'Creep behavior of Mg-10Gd-xZn (x=2 and 6wt%) alloys'. Materials Science and Engineering A, 649. pp. 158 - 167. ISSN: 0921-5093

D'Elia, F., Tolnai, D., Mendis, CL. and Hort, N. (2016) 'Hot tearing susceptibility of Mg-5Nd-xZn alloys'.TMS annaual Meeting. Orlando Florida USA. 1 - 18 February. Wiley. pp. 129 - 134. ISSN: 1545-4150 Open Access Link

Szakács, G., Mendis, CL., Tolnai, D., Vlcek, M., Lukác, F., Stulíková, I., Smola, B., Wolff, M., Schmid-Fetzer, R., Schell, N., Kainer, KU. and Hort, N. et al. (2016) 'As solidified microstructure investigation of Mg15Y and MgxYyGd (x+y=15 wt.%) ternary alloys'.Magnesium Technology Symposium held during the 145th TMS Annual Meeting and Exhibition. Nashville, TN. 1 - 18 February. Springer International Publishing. pp. 23 - 27. ISSN: 1545-4150

Niu, Z. and Cheng, K. (2016) 'Multiphysics based modelling and analysis of micro milling metal matrix composites (MMCs) against the effects of key process variables'. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology Euspen 2016.

Men, H. (2016) 'A molecular dynamics study of growth anisotropy in Al melt'. Modelling and Simulation in Materials Science and Engineering, 24 (1). pp. 015008 - 015008. ISSN: 0965-0393

Tzanakis, I., Lebon, GSB., Eskin, DG. and Pericleous, K. (2016) 'Optimization of the ultrasonic processing in a melt flow'. TMS Light Metals. pp. 833 - 836. ISSN: 0147-0809

Lebon, GSB., Tzanakis, I., Pericleous, K. and Eskin, D. (2016) 'A High-Order Acoustic Cavitation Model for the Treatment of a Moving Liquid Metal Volume'. Springer International Publishing. pp. 135 - 142. ISSN: 2367-1181

Nadendla, HB., Nowak, M. and Bolzoni, L. (2016) 'Grain Refiner for Al-Si Alloys'. Springer International Publishing. pp. 1009 - 1012. ISSN: 2367-1181

Ji, S., Yang, W., Gao, F., Watson, D. and Fan, Z. (2016) 'Effect of iron in Al-Mg-Si-Mn ductile diecast alloy'.Proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2013 Annual Meeting & Exhibition. San Antonio, TX, USA. 1 - 7 March. Springer International Publishing. pp. 317 - 322. ISSN: 2367-1181

Alba-Baena, N. and Eskin, D. (2016) 'Kinetics of Ultrasonic Degassing of Aluminum Alloys'. Springer International Publishing. pp. 957 - 962. ISSN: 2367-1181

Klassen, T., Gaertner, F. and Assadi, H. (2016) 'Process Science of Cold Spray', in Kay, CM. and Karthikeyan, J. (eds.) High Pressure Cold Spray Principles and Applications. pp. 17 - 66. ISBN 10: 162708097X.

Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2016) 'Texture Changes during Simple Shear Extrusion (SSE) Processing of Pure Copper'. MATERIALS TRANSACTIONS, 57 (9). pp. 1386 - 1391. ISSN: 1345-9678

Sharma, K., Basak, CB., Deo, MN., Goswami, M. and Krishnan, M. (2016) 'The effect of ZnO addition on thermo-physical and structural properties of 45S5 bioactive glass/glass-microspheres'.DAE SOLID STATE PHYSICS SYMPOSIUM 2015. Author(s). pp. 070012 - 070012. ISSN: 0094-243X

Ma, C., Hou, L., Zhang, J. and Zhuang, L. (2016) 'Influence of thickness reduction per pass on strain, microstructures and mechanical properties of 7050 Al alloy sheet processed by asymmetric rolling'. Materials Science and Engineering: A, 650. pp. 454 - 468. ISSN: 0921-5093

Klösch, G., McKay, BJ. and Schumacher, P. (2016) 'Preliminary Investigation on the Grain Refinement Behavior of ZrB2 Particles in Mg-Al Alloys', inEssential Readings in Magnesium Technology. Springer International Publishing. pp. 255 - 261. ISBN 13: 9783319485881.

Li, W-F., Fang, C. and van Huis, MA. (2016) 'Strong spin-orbit splitting and magnetism of point defect states in monolayerWS2'. Physical Review B, 94 (19). ISSN: 2469-9950

Kawther, AH., Stone, I. and Fan, Z. (2016) 'Refinement of primary silicon crystals by novel Al-ZnS Master alloy in solidification of hypereutectic Al-Si Alloys'. TMS Light Metals. pp. 271 - 273. ISSN: 0147-0809

Cernea, M., Florentina Negrea, R., Veronica Ciuchi, I., Baldisserri, C., Trusca, R. and Galassi, C. (2016) 'Dielectric characterization of Ba x Sr 1−x Fe 12 O 19 ( x =0.05−0.35) ceramics'. Ceramics International, 42 (1). pp. 1050 - 1056. ISSN: 0272-8842

Shi, JT., Hou, LG., Ma, CQ., Zuo, JR., Cui, H., Zhuang, LZ. and Zhang, JS. et al. (2016) 'Mechanical Properties and Microstructures of 5052 Al Alloy Processed by Asymmetric Cryorolling'. Materials Science Forum, 850. pp. 823 - 828. ISSN: 0255-5476

Zhou, M., Jiang, L., Wang, Y., Chen, S. and Usmani, A. (2016) 'CASE STUDY OF RESIDUAL FIRE RESISTANTCE OF MULTISTORY STEEL FRAMES FOLLOWING MODERATE EARTHQUAKES'. STEEL AND ALUMINIUM STRUCTURES.

Zhou, X-L., Zhu, X-Z., Gao, T., Wu, Y-Y. and Liu, X-F. (2016) 'Evolution of a novel Si-18Mn-16Ti-11P alloy in Al-Si melt and its influence on microstructure and properties of high-Si Al-Si alloy'. Results in Physics, 6. pp. 737 - 745. ISSN: 2211-3797

Li, Z., Limodin, N., Tandjaoui, A., Quaegebeur, P., Witz, J-F. and Balloy, D. (2016) 'Damage investigation in A319 aluminum alloy by digital image correlation during in-situ tensile tests'. Procedia Structural Integrity, 2. pp. 3415 - 3422. ISSN: 2452-3216

Schmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, CL., Tolnai, D., Kainer, KU. and Hort, N. et al. (2016) 'Thermodynamic Description of Reactions between Mg and CaO', inMagnesium Technology 2016. Springer International Publishing. pp. 67 - 72. ISBN 13: 9783319486208.

D’Elia, F., Tolnai, D., Mendis, CL. and Hort, N. (2016) 'Hot Tearing Susceptibility of Mg-5Nd-xZn Alloys', inMagnesium Technology 2016. Springer International Publishing. pp. 129 - 134. ISBN 13: 9783319486208.

Ji, S., Yang, H., Watson, D. and Fan, Z. (2016) 'Weibull analysis for the repeatibility of die castings made by an Al-Mg-Si-Mn ALLOY'.Symposium on Light Metals held during 145th The-Minerals-Metals-and-Materials-Society Annual Meeting and Exhibition. Nashville, TN. 1 - 18 February. JOHN WILEY & SONS INC. pp. 681 - 685. ISSN: 0147-0809

Wang, Y., Zhou, L. and Fan, Z. (2016) 'Mechanism of zirconium poisioning effect on TiB2 inoculation in aluminium alloys'. TMS Light Metals. pp. 725 - 729. ISSN: 0147-0809

Manu, KMS., Sreeraj, K., Rajan, TPD., Shereema, RM., Pai, BC. and Arun, B. (2015) 'Structure and properties of modified compocast microsilica reinforced aluminum matrix composite'. MATERIALS & DESIGN, 88. pp. 294 - 301. ISSN: 0264-1275

LIU, G-Y., NI, S. and SONG, M. (2015) 'Effect of indentation size and grain/sub-grain size on microhardness of high purity tungsten'. Transactions of Nonferrous Metals Society of China, 25 (10). pp. 3240 - 3246. ISSN: 1003-6326

Ji, S., Fan, Z. and Bevis, M. (Accepted) 'Method and apparatus for producing semisolid metal slurries and shaped components'.

Tzanakis, I., Lebon, GSB., Eskin, D. and Pericleous, K. (2015) 'Comparison of cavitation intensity in water and in molten aluminium using a high-temperature cavitometer'. Journal of Physics: Conference Series, 656 (1). pp. 012120 - 012120. ISSN: 1742-6588 Open Access Link

Lebon, GSB., Tzanakis, I., Pericleous, K. and Eskin, D. (2015) 'Comparison between low-order and high-order acoustic pressure solvers for bubbly media computations'. Journal of Physics: Conference Series, 656 (1). pp. 012134 - 012134. ISSN: 1742-6588 Open Access Link

Rahimian, M., Milenkovic, S., Maestro, L., Eguidazu Ruiz De Azua, A. and Sabirov, I. (2015) 'Development of tool for physical simulation of skin formation during investment casting of nickel-based superalloys'. Materials & Design, 87. pp. 712 - 720. ISSN: 0264-1275

De Giovanni, M., Warnett, JM., Williams, MA., Haribabu, N. and Srirangam, P. (2015) 'X-ray tomography investigation of intensive sheared Al–SiC metal matrix composites'. Materials Characterization, 110. pp. 258 - 263. ISSN: 1044-5803

Resmi, VG., Sree Manu, KM., Lakshmi, V., Brahmakumar, M., Rajan, TPD., Pavithran, C. and Pai, BC. et al. (2015) 'Processing of silica bonded porous SiC preform for metallic composites'. Journal of Porous Materials, 22 (6). pp. 1445 - 1454. ISSN: 1380-2224

Que, ZP., Zhou, YP., Wang, Y. and Fan, Z. (2015) 'Effect of MgO on Phase Selection in Al–Mg–Si–Fe–Mn Alloys'. Transactions of the Indian Institute of Metals, 68 (6). pp. 1167 - 1172. ISSN: 0972-2815

Yang, W., Liu, L., Zhang, J., Ji, S. and Fan, Z. (2015) 'Heterogeneous nucleation in Mg–Zr alloy under die casting condition'. Materials Letters, 160. pp. 263 - 267. ISSN: 0167-577X

Sree Manu, KM., Sreeraj, K., Rajan, TPD., Shereema, RM., Pai, BC. and Arun, B. (2015) 'Structure and properties of modified compocast microsilica reinforced aluminum matrix composite'. Materials & Design, 88. pp. 294 - 301. ISSN: 0264-1275