Peng, GS., Song, GS., Wang, Y., Chen, KH. and Chen, SY. (2018) 'Intensive melt shearing and calcium concentration effects on grain refinement of commercial purity Mg'. International Journal of Cast Metals Research, 31 (2). pp. 99 - 107. ISSN: 1364-0461

Bischoff, MMJ., Yamada, TK., Fang, CM., de Groot, RA. and van Kempen, H. (Accepted) 'Local electronic structure of Fe(001) surfaces studied by scanning tunneling spectroscopy'. Physical Review B, 68 (4). ISSN: 0163-1829

Rezaei, M., Kermanpur, A. and Sadeghi, F. (2018) 'Effects of withdrawal rate and starter block size on crystal orientation of a single crystal Ni-based superalloy'. Journal of Crystal Growth, 485. pp. 19 - 27. ISSN: 0022-0248

Lazaro Nebreda, J. and Zhang, Y. (2018) 'Improved defect control and mechanical property variation in High Pressure Die Casting (HPDC) of A380 alloy by High Shear Melt conditioning'.16th International Conference on Aluminium Alloys (ICAA16). Montreal, Canada.

Kassam, TA., Hari Babu, N., Ludford, N., Yan, S. and Howkins, A. (2018) 'Secondary Phase Interaction at Interfaces of High-Strength Brazed Joints made using Liquid Phase Sintered Alumina Ceramics and Ag-Cu-Ti Braze Alloys'. Scientific Reports, 8 (1). pp. 1 - 11. ISSN: 2045-2322 Open Access Link

Rahimian, M., Amirkhanlou, S., Blake, P. and Ji, S. (2018) 'Nanoscale Zr-containing precipitates; a solution for significant improvement of high-temperature strength in Al-Si-Cu-Mg alloys'. Materials Science and Engineering A, 721. pp. 328 - 338. ISSN: 0921-5093 Open Access Link

Dong, X. and Ji, S. (2018) 'Si poisoning and promotion on the microstructure and mechanical properties of Al–Si–Mg cast alloys'. Journal of Materials Science, 53 (10). pp. 1 - 15. ISSN: 0022-2461 Open Access Link

Wang, B., Tan, D., Lee, TL., Khong, JC., Wang, F., Eskin, D., Connolley, T., Fezzaa, K. and Mi, J. et al. (2018) 'Data and videos for ultrafast synchrotron X-ray imaging studies of metal solidification under ultrasound'. Data in Brief, 17. pp. 837 - 841. ISSN: 2352-3409 Open Access Link

Wang, B., Tan, D., Lee, TL., Khong, JC., Wang, F., Eskin, D., Connolley, T., Fezzaa, K. and Mi, J. et al. (2018) 'Data and videos for ultra fast synchrotron X-ray imaging studies of metal solidification under ultrasound'. Data inBrief, 17. pp. 837 - 841. ISSN: 2352-3409 Open Access Link

Khvan, AV., Eskin, DG., Starodub, KF., Dinsdale, AT., Wang, F., Fang, C., Cheverikin, VV. and Gorshenkov, MV. et al. (2018) 'New insights into solidification and phase equilibria in the Al-Al3Zr system: theoretical and experimental investigations'. Journal of Alloys and Compounds, 743. pp. 626 - 638. ISSN: 0925-8388 Open Access Link

Dong, X. and Ji, S. (2018) 'Grain refinement of Al–Si–Mg cast alloys by Al3Ti3B master alloy'.TMS Annual Meeting & Exhibition. Phoenix, USA. 2 - 15 March. Springer International Publishing. pp. 319 - 323. ISSN: 2367-1181 Open Access Link

Eskin, DG. (2018) 'Sc applications in aluminum alloys: Overview of Russian research in the 20th century'.TMS Annual Meeting. Phoenix, Arizona, USA. 2 - 15 March. Springer International Publishing. pp. 1565 - 1572. ISSN: 2367-1181 Open Access Link

Bucur, IC., Tănase, LC., Abramiuc, LE., Lungu, GA., Chirilă, C., Trupină, L., Apostol, NG., Costescu, RM., Negrea, RF., Pintilie, L. and Teodorescu, CM. et al. (2018) 'Triggering surface ferroelectric order in Pb(Zr,Ti)O3(001) by deposition of platinum'. Applied Surface Science, 432. pp. 27 - 33. ISSN: 0169-4332

Rifai, M., Bagherpour, E., Yamamoto, G., Yuasa, M. and Miyamoto, H. (2018) 'Transition of Dislocation Structures in Severe Plastic Deformation and Its Effect on Dissolution in Dislocation Etchant'. Advances in Materials Science and Engineering, 2018 (1). pp. 1 - 6. ISSN: 1687-8434 Open Access Link

Yang, X., Mendis, CL., Patel, JB. and Fan, Z. (2018) 'Microstructure evolution and mechanical properties of thin strip twin roll cast (TRC) Mg sheet'.TMS annual meeting & exhibition. Phoenix, Arizona, USA. 28 - 15 March. Springer International Publishing. pp. 429 - 432. ISSN: 2367-1181 Open Access Link

Zeng, G., Zhu, X., Ji, S. and Gourlay, CM. (2018) 'The morphology and distribution of Al8Mn5in high pressure die cast AM50 and AZ91'.TMS Annual Meeting & Exhibition. TMS 2018. 28 - 15 March. Springer International Publishing. pp. 137 - 144. ISSN: 2367-1181 Open Access Link

Ji, S., Smith, J. and Amirkhanlou, S. (Accepted) 'High Modulus Aluminium Alloy'.Open Access Link

Li, W., Assadi, H., Gaertner, F. and Yin, S. (2018) 'A Review of Advanced Composite and Nanostructured Coatings by Solid-State Cold Spraying Process'. Critical Reviews in Solid State and Materials Sciences, 44 (2). pp. 109 - 156. ISSN: 1040-8436 Open Access Link

Ji, S. and Liu, G. (2018) 'Effect of Bi on the microstructure and mechanical properties of Sn-Zn alloys'. Materials Characterization, 137 (March 2018). pp. 39 - 49. ISSN: 1044-5803 Open Access Link

Liu, G. and Ji, S. (2018) 'Effect of Bi on the microstructure and mechanical properties of Sn-Zn alloys processed by rolling'. Materials Characterization, 137. pp. 39 - 49. ISSN: 1044-5803 Open Access Link

Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2018) 'Strain reversal in simple shear extrusion (SSE) processing: Microstructure investigations and mechanical properties'.6TH INTERNATIONAL BIENNIAL CONFERENCE ON ULTRAFINE GRAINED AND NANOSTRUCTURED MATERIALS: (UFGNSM2017). IRAN. Author(s). pp. 020007 - 020007. ISSN: 0094-243X

Su, SS. and Chang, I. (2018) 'Review of Production Routes of Nanomaterials', inCommercialization of Nanotechnologies–A Case Study Approach. Springer International Publishing. pp. 15 - 29. ISBN 13: 9783319569789.

Amirkhanlou, S. and Ji, S. (2018) 'Stiffness improvement through alloying elements in Al alloys'.Light Metals Symposium at the 147th Annual TMS Meeting and Exhibition. Phoenix, AZ. 1 - 15 March. Springer International Publishing. pp. 431 - 433. ISSN: 2367-1181

Chang, L., Liu, J., Yang, HL., Ruan, JM. and Ji, S. (2018) 'Effects of Zr contents on the microstructure, mechanical properties and biocompatibility of Ta-Zr alloys'. Trans Tech Publications, Ltd.. pp. 37 - 44. ISSN: 0255-5476

Karabay, S., Ertürk, AT., Zeren, M., Yamanoğlu, R. and Karakulak, E. (2018) 'Failure analysis of wire-breaks in aluminum conductor production and investigation of early failure reasons for transmission lines'. Engineering Failure Analysis, 83. pp. 47 - 56. ISSN: 1350-6307

Afifi, MA., Wang, YC., Pereira, PHR., Wang, Y., Li, S., Huang, Y. and Langdon, TG. et al. (2018) 'Characterization of precipitates in an Al-Zn-Mg alloy processed by ECAP and subsequent annealing'. Materials Science and Engineering: A, 712. pp. 146 - 156. ISSN: 0921-5093

Matsunaga, T., Souissi, M., Sahara, R., Hongo, H., Tabuchi, M., Zhang, W. and Mills, MJ. et al. (2018) 'Creep Property of Boron Added 9Cr Heat Resistant Steels after Welding'. Trans Tech Publications, Ltd.. pp. 340 - 345. ISSN: 0255-5476

Darvishi, S., Souissi, M., Kharaziha, M., Karimzadeh, F., Sahara, R. and Ahadian, S. (2018) 'Gelatin methacryloyl hydrogel for glucose biosensing using Ni nanoparticles-reduced graphene oxide: An experimental and modeling study'. Electrochimica Acta, 261. pp. 275 - 283. ISSN: 0013-4686

Negrea, R. and Andra Georgia Boni, Cristina Florentina Chirila, Corneliu Ghica, Iuliana Pasuk, Ioana Pintilie and Lucian Pintilie. (2018) 'Electrical Properties of Epitaxial Ferroelectric Heterostructures', inEpitaxy. InTech. ISBN 13: 9789535138891.

Boni, GA., Filip, LD., Chirila, C., Pasuk, I., Negrea, R., Pintilie, I. and Pintilie, L. et al. (2017) 'Multiple polarization states in symmetric ferroelectric heterostructures for multi-bit non-volatile memories'. Nanoscale, 9 (48). pp. 19271 - 19278. ISSN: 2040-3364

Ji, S., Zhu, X. and Blake, P. (Accepted) 'AN ALUMINIUM ALLOY FOR HIGH PRESSURE DIE CASTING'.

Niu, Z., Jiao, F. and Cheng, K. (2017) 'An innovative investigation on chip formation mechanisms in micro-milling using natural diamond and tungsten carbide tools'. Journal of Manufacturing Processes, 31. pp. 382 - 394. ISSN: 1526-6125 Open Access Link

Wang, F., Eskin, D., Mi, J., Wang, C., Koe, B., King, A., Reinhard, C. and Connolley, T. et al. (2017) 'A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35Cu alloy induced by ultrasonic melt processing'. Acta Materialia, 141. pp. 142 - 153. ISSN: 1359-6454 Open Access Link

Ciobotaru, CC., Ciobotaru, IC., Schinteie, G., Negrea, R. and Polosan, S. (2017) 'Enhancement of the electroluminescence of organic light emitting devices based on Ir(ppy) 3 by doping with metallic and magnetic nanoparticles'. Materials Science in Semiconductor Processing, 72. pp. 78 - 84. ISSN: 1369-8001

Wang, F., Eskin, D., Connolley, T., Wang, C., Koe, B., King, A., Reinhard, C. and Mi, J. et al. (2017) 'In-situ synchrotron X-ray radiography observation of primary Al2Cu intermetallic growth on fragments of aluminium oxide film'. Materials Letters, 213. pp. 303 - 305. ISSN: 0167-577X Open Access Link

Franconi, A. (2017) 'Metodi per la progettazione di prodotti circolari'.Fare ricerca in design. Venice.

Ji, S., Zhu, X. and Blake, P. (Accepted) 'Aluminium alloys for high pressure die casting'.

Wang, B., Tan, D., Lee, TL., Khong, JC., Wang, F., Eskin, D., Connolley, T., Fezzaa, K. and Mi, J. et al. (2017) 'Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound'. Acta Materialia, 144. pp. 505 - 515. ISSN: 1359-6454 Open Access Link

Ji, S., Xixi Dong. and Zhang, Y. (Accepted) 'High strength and ductility die cast aluminium alloy'.

Manoylov, A., Lebon, B., Djambazov, G. and Pericleous, K. (2017) 'Coupling of Acoustic Cavitation with Dem-Based Particle Solvers for Modeling De-agglomeration of Particle Clusters in Liquid Metals'. Metallurgical and Materials Transactions A, 48 (11). pp. 5616 - 5627. ISSN: 1073-5623

Lazaro Nebreda, J., Solórzano, E. and Rodríguez-Pérez, MA. (2017) 'Clues for Cellular Structure Optimization in Aluminum Foams'. Advanced Engineering Materials, 19 (11). pp. 1600496 - 1600496. ISSN: 1438-1656

Hu, KQ., Jiang, W., Zhu, XZ., Zhang, Q., Sun, QQ. and Liu, XF. (2017) 'Affecting factors of P absorption rate of hypereutectic Al-Si alloys'. Zhongguo Youse Jinshu Xuebao Chinese Journal of Nonferrous Metals, 27 (11). pp. 2242 - 2250. ISSN: 1004-0609

Scamans, G. (2017) 'Advanced aluminium automotive engineering conference 2017'. Light Metal Age, 75 (6). pp. 10 - 15. ISSN: 0024-3345

Sen, S., Tyagi, M., Sharma, K., Sarkar, PS., Sarkar, S., Basak, CB., Pitale, S., Ghosh, M. and Gadkari, SC. et al. (2017) 'Organic–Inorganic Composite Films Based on Gd₃Ga₃Al₂O₁₂:Ce Scintillator Nanoparticles for X-ray Imaging Applications'. ACS Applied Materials & Interfaces, 9 (42). pp. 37310 - 37320. ISSN: 1944-8244

Kim, YM., Mendis, C., Sasaki, T., Letzig, D., Pyczak, F., Hono, K. and Yi, S. et al. (2017) 'Erratum to “Static recrystallization behaviour of cold rolled Mg-Zn-Y alloy and role of solute segregation in microstructure evolution” (Scr. Mater. (2017) (136) (41–45) (S135964621730177X) (10.1016/j.scriptamat.2017.04.001))'. Scripta Materialia, 145. pp. 131 - 131. ISSN: 1359-6462

Dong, X., Zhang, Y., Amirkhanlou, S. and Ji, S. (2017) 'High performance gravity cast Al9Si0.45Mg0.4Cu alloy inoculated with AlB2and TiB2'. Journal of Materials Processing Technology, 252. pp. 604 - 611. ISSN: 0924-0136 Open Access Link

Mohammadi, V., Nihtianov, S. and Fang, C. (2017) 'A doping-less junction-formation mechanism between n-silicon and an atomically thin boron layer'. Scientific Reports, 7 (1). pp. 1 - 9. ISSN: 2045-2322 Open Access Link

Ji, S. (2017) 'Revisit of Al-Si-Mg (Cu) cast alloys for gravity and high pressure die casting: Microstructure and mechanical properties'.Materials Science and Technology (MS&T17). Pittsburgh. 9 - 12 October.

Ren, F., Wang, J., Ge, H., Li, J., Hu, Q., Nadendla, H-B., Xia, M. and Li, J. et al. (2017) 'A Homogeneous Billet Layer Casting Fabrication Method'. Metallurgical and Materials Transactions A, 48 (10). pp. 4453 - 4457. ISSN: 1073-5623

Li, Z., Limodin, N., Tandjaoui, A., Quaegebeur, P., Witz, J-F. and Balloy, D. (2017) 'Influence of Fe content on the damage mechanism in A319 aluminum alloy: Tensile tests and digital image correlation'. Engineering Fracture Mechanics, 183. pp. 94 - 108. ISSN: 0013-7944

Boni, AG., Chirila, C., Pasuk, I., Negrea, R., Pintilie, I. and Pintilie, L. (2017) 'Steplike Switching in SymmetricPbZr0.2Ti0.8O3/CoFeO4/PbZr0.2Ti0.8O3Heterostructures for Multistate Ferroelectric Memory'. Physical Review Applied, 8 (3).