Kambara, M., Hari Babu, N., Shi, YH. and Cardwell, DA. (2001) 'Growth of melt-textured Nd-123 by hot seeding under reduced oxygen partial pressure'. Journal of Materials Research, 16 (4). pp. 1163 - 1170. ISSN: 0884-2914

Kambara, M., HariBabu, N., Shi, Y. and Cardwell, DA. (2001) 'Crystal growth of melt-textured Nd-123 under 1% oxygen partial pressure atmosphere'.2000 Applied Superconductivity Conference. VIRGINIA BEACH, VIRGINIA. 1 - 22 September. Institute of Electrical and Electronics Engineers (IEEE). pp. 3442 - 3445. ISSN: 1051-8223

Bourgeois, L., Mendis, CL., Muddle, BC. and Nie, HF. (2001) 'Characterisation of primary intermetallic phases in a Mg-Zn-Al casting alloy'.4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). HONOLULU, HI. 1 - 15 December. JAPAN INST METALS. pp. 1203 - 1206.

Fang, CM., De With, G. and Parker, SC. (2001) 'Computer Simulation of Dissociative Adsorption of Water on the Surfaces of Spinel MgAl2O4'. Journal of the American Ceramic Society, 84 (7). pp. 1553 - 1558. ISSN: 0002-7820

Fang, CM., Metselaar, R., Hintzen, HT. and De With, G. (2001) 'Structure Models for γ-Aluminum Oxynitride from Ab Initio Calculations'. Journal of the American Ceramic Society, 84 (11). pp. 2633 - 2637. ISSN: 0002-7820

Fang, CM., Metselaar, R., Hintzen, HT. and De With, G. (2001) 'Application of first-principles methods for the calculation of the crystal and electronic structure of oxynitrides'. Key Engineering Materials, 206-213 (II). pp. 1149 - 1152. ISSN: 1013-9826

Borchers, C., Stoltenhoff, T., Gärtner, F., Kreye, H. and Assadi, H. (2001) 'Deformation microstructure of cold gas sprayed coatings'. Materials Research Society Symposium Proceedings, 673. pp. P7.10.1 - P7.10.6. ISSN: 0272-9172

Mendis, CL., Muddle, BC. and Nie, JF. (2001) 'Enhanced precipitation hardening in Mg-Zn-Al casting alloys'.4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). HONOLULU, HI. 1 - 15 December. JAPAN INST METALS. pp. 1207 - 1210.

Wang, Y. and Jones, H. (2001) 'Effect of growth velocity on the growth temperature of the Al-AlxFe eutectic in Al-2.85Fe-0.12V alloy'. Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 32 (5). pp. 1251 - 1253. ISSN: 1073-5623

Wang, Y., Rainforth, WM., Jones, H. and Lieblich, M. (2001) 'Dry wear behaviour and its relation to microstructure of novel 6092 aluminium alloy-Ni3Al powder metallurgy composite'. Wear, 250 (251). pp. 1421 - 1432. ISSN: 0043-1648

Eskin, DG. and Kharakterova, ML. (2001) 'The effect of silicon and copper on the precipitation hardening of sheets of a 6XXX-series alloy'. Materials Technology, 35. pp. 5 - 8.

Ji, S. and Fan, Z. (2001) 'Improving the roundness of foundry sands with artificial processing'. International Journal of Cast Metals Research, 14 (1). pp. 37 - 42. ISSN: 1364-0461

Cardwell, DA., Kambara, M., Babu, NH., Smith, PJ. and Shi, Y. (2001) 'Fabrication of large grain Nd-Ba-Cu-O by self-seeded melt growth'. IEEE Transactions on Applied Superconductivity, 11 (1). pp. 3712 - 3715. ISSN: 1051-8223

McKay, BJ., Cizek, P., Schumacher, P. and O'Reilly, KAQ. (2000) 'Heterogeneous nucleation of α-Al in Al-Ni-Si alloys'. Light Metals Proceedings of Sessions TMS Annual Meeting Warrendale Pennsylvania. pp. 833 - 839. ISSN: 1096-9586

Katgerman, L. and Eskin, DG. (2000) 'Experimental study of linear shrinkage during solidification of binary and commercial aluminium alloys'.Continuous Casting. Frankfurt/Main. 13 - 15 November. Wiley-VCH. pp. 276 - 281.

Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'Hot deformation and annealing of cube-oriented aluminium single crystals'. Materials Science and Technology, 16 (11-12). pp. 1367 - 1371. ISSN: 1316-2012

Smith, PJ., Cardwell, DA., Hari Babu, N., Zhou, W. and Shi, YH. (2000) 'Properties of Y-Ba-Cu-O powder prepared by evaporative decomposition of solution for melt-processed bulk ceramics'. Superconductor Science and Technology, 13 (11). pp. 1526 - 1532. ISSN: 0953-2048

Fang, CM., de Wijs, GA., de Groot, RA., Hintzen, HT. and de With, G. (2000) 'ChemInform Abstract: Bulk and Surface Electronic Structure of the Layered Sub‐Nitrides Ca₂N and Sr₂N.'. ChemInform, 31 (44). ISSN: 0931-7597

Fang, CM., De Wijs, GA., De Groot, RA., Metselaar, R., Hintzen, HT. and De With, G. (2000) 'O/N ordering in Y2Si3O3N4 with the melilite-type structure from first-principles calculations'. Chemistry of Materials, 12 (4). pp. 1071 - 1075. ISSN: 0897-4756

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Effect of cooling rate on the microstructure of hypereutectic Al-Mg2Si alloys'. Journal of Materials Science Letters, 19 (20). pp. 1825 - 1828. ISSN: 0261-8028

Ji, S. and Fan, Z. (2000) 'Microstructural evolution of semisolid Sn-15wt%Pb alloy under high shear rate and high intensity of turbulence'.the 6th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Turin, Italy. 20 - 29 September. Edimet. pp. 723 - 729.

Humphreys, FJ. and Huang, Y. (2000) 'Grain boundary migration during recovery and the early stages of recrystallization'.21th Inter Symp on Materials Science: Recrystalliozation-Fundamental Aspects and Relations to Deformation Microstructure. Roskilde, Denmark. 5 - 5 September.

Huang, Y. and Humphreys, FJ. (2000) 'High resolution EBSD and its application to the study of heavily deformed microstructures'.IUMRS - 6th Inter. Conf. in Asia, Section E: Scanning Probe Microscopy for Materials Characterization. Hong Kong. 23 - 26 July.

Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'Annealing behaviour of deformed cube-oriented aluminium single crystals'. Acta Materialia, 48 (10). pp. 2543 - 2556. ISSN: 1359-6454

Ji, S., Fan, Z., Wan, L. and Zhang, J. (2000) 'Moulding characteristics of sand mixture with partial vacuum suction techniques'. International Journal of Cast Metals Research, 13 (3). pp. 161 - 165. ISSN: 1743-1336

Peng, HX., Fan, Z., Evans, JRG. and Busfield, JJC. (2000) 'Microstructure of ceramic foams'. Journal of the European Ceramic Society, 20 (7). pp. 807 - 813. ISSN: 0955-2219

Cardwell, DA., Hari Babu, N., Lo, W. and Campbell, AM. (2000) 'Processing, microstructure and irreversibility of large-grain Nd-Ba-Cu-O'. Superconductor Science and Technology, 13 (6). pp. 646 - 654. ISSN: 0953-2048

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Microstructural evolution of the in situ Al-15wt.%Mg2Si composite with extra Si contents'. Scripta Materialia, 42 (11). pp. 1101 - 1106. ISSN: 1359-6462

Huang, Y. and Humphreys, FJ. (2000) 'Subgrain growth and low angle boundary mobility in aluminium crystals of orientation {110}〈001〉'. Acta Materialia, 48 (8). pp. 2017 - 2030. ISSN: 1359-6454

Babu, NH., Lo, W., Cardwell, DA. and Shi, YH. (2000) 'Fabrication and microstructure of large grain Nd-Ba-Cu-O'. Superconductor Science and Technology, 13 (5). pp. 468 - 472. ISSN: 0953-2048

Huang, Y., Ferry, M. and Humphreys, FJ. (2000) 'Plain strain compression of Cube orientated Al-0.05Si single-phase alloy at elevated temperatures'.Matererial Congress 2000 on Materials for 21st Century. Cirencester, UK. 22 - 14 April.

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Microstructural development of Al-15wt.%Mg2Si in situ composite with mischmetal addition'. Materials Science and Engineering A, 281 (1-2). pp. 104 - 112. ISSN: 0921-5093

Eskin, DG. (2000) 'Primary solidification in aluminum alloys under melt overheating'.7th International Conference on Aluminium Alloys (ICAA7). CHARLOTTESVILLE, VIRGINIA. 9 - 14 April. TRANS TECH PUBLICATIONS LTD. pp. 155 - 160. ISSN: 0255-5476

Babu, NH., Rajasekharan, T. and Bai, VS. (2000) 'Use of the ac inductive method to assess the quality of bulk melt textured superconductors'. Physica C Superconductivity and Its Applications, 330 (3). pp. 203 - 207. ISSN: 0921-4534

Kambara, M., Nadendla, HB., Shi, YH. and Cardwell, DA. (2000) 'Reduction of porosity in RE1Ba2Cu3Oy pseudo crystals'.International Conference on Materials and Mechanisms of Superconductivity High Temperature Superconductors VI. HOUSTON, TEXAS. 20 - 25 February. ELSEVIER SCIENCE BV. pp. 2473 - 2474. ISSN: 0921-4534

Fang, CM., De Groot, RA., Bischoff, MMJ. and Van Kempen, H. (2000) 'Local electronic structure of intrinsic defects and impurities at the Fe(001) surface'. Surface Science, 445 (1). pp. 123 - 129. ISSN: 0039-6028

Huang, Y. (2000) 'Hot deformation and annealing of cube oriented aluminium single crystals'.Materials Congress 2000. CIRENCESTER, ENGLAND. 1 - 14 April. SAGE Publications. pp. 1367 - 1371. ISSN: 0267-0836

Zhang, J., Fan, Z., Wang, Y. and Zhou, B. (2000) 'Hypereutectic aluminium alloy tubes with graded distribution of Mg2Si particles prepared by centrifugal casting'. Materials and Design, 21 (3). pp. 149 - 153. ISSN: 0264-1275

Kambara, M., Nadendla, HB., Shi, Y. and Cardwell, DA. (2000) 'Reduction of porosity in RE1Ba2Cu3Oy pseudo crystals'. Physica C Superconductivity and Its Applications, 341-348 (IV). pp. 2473 - 2474. ISSN: 0921-4534

Fang, CM., Parker, SC. and De With, G. (2000) 'Atomistic simulation of the surface energy of spinel MgAl2O4'. Journal of the American Ceramic Society, 83 (8). pp. 2082 - 2084. ISSN: 0002-7820

Fang, CM., De Wijs, GA., De Groot, RA., Hintzen, HT. and De With, G. (2000) 'Bulk and surface electronic structure of the layered sub-nitrides Ca2N and Sr2N'. Chemistry of Materials, 12 (7). pp. 1847 - 1852. ISSN: 0897-4756

Mummery, PM., Burdekin, NA. and Stone, IC. (2000) 'The effct of spatial distribution of reinforcement on the fracture of particle reinforced MMCs'.Euromat '99. Wiley-VCH. pp. 162.

Cardwell, DA., Babu, NH., Kambara, M., Smith, PJ. and Shi, Y. (2000) 'Fabrication of large grain Nd-Ba-Cu-O by seeded melt growth'. Physica C Superconductivity and Its Applications, 341-348 (IV). pp. 2297 - 2300. ISSN: 0921-4534

Yan, M. and Fan, Z. (2000) 'Erosion of H21 tool steel in molten A380 alloy'. Journal of Materials Science, 35 (7). pp. 1661 - 1667. ISSN: 0022-2461

Lo, W., Hari Babu, N., Cardwell, DA., Shi, Y. and Astill, DM. (2000) 'Fabrication and characterization of large Nd-Ba-Cu-O grains prepared under low oxygen pressure'. Journal of Materials Research, 15 (1). pp. 33 - 39. ISSN: 0884-2914

Babu, NH., Cardwell, D., Lo, W. and Campbell, A. (2000) 'Flux pinning in large grains fabricated by seeded-melt growth'. Physical Review B Condensed Matter and Materials Physics, 61 (1). pp. 735 - 740. ISSN: 1098-0121

Hari Babu, N., Kambara, M., Smith, PJ., Cardwell, DA. and Shi, Y. (2000) 'Fabrication of large single-grain Y-Ba-Cu-O through infiltration and seeded growth processing'. Journal of Materials Research, 15 (6). pp. 1235 - 1238. ISSN: 0884-2914

Babu, NH., Lo, W. and Cardwell, DA. (2000) 'Influence of undercooling and Nd4Ba2Cu2O10 content on the growth rate of large-grain bulk Nd-Ba-Cu-O superconductor'. Journal of the American Ceramic Society, 83 (10). pp. 2622 - 2624. ISSN: 0002-7820

Peng, HX., Fan, Z. and Evans, JRG. (2000) 'Factors affecting the microstructure of a fine ceramic foam'. Ceramics International, 26 (8). pp. 887 - 895. ISSN: 0272-8842

Peng, HX., Fan, Z. and Wang, DZ. (2000) 'In situ Al3Ti-Al2O3 intermetallic matrix composite: Synthesis, microstructure, and compressive behavior'. Journal of Materials Research, 15 (9). pp. 1943 - 1949. ISSN: 0884-2914

Jacot, A., Maijer, D. and Cockcroft, S. (2000) 'Modeling of microstructure and residual stress in cast iron calender rolls'. Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 31 (4). pp. 1201 - 1211. ISSN: 1073-5623