BCAST
View our websiteHuang, Y. (2012) 'Evolution of Microstructure and Texture during Hot Deformation of a Commercially Processed Supral100'. Journal of Materials Science & Technology, 28 (6). pp. 531 - 536. ISSN: 1005-0302
Pawar, S., Zhou, X., Thompson, GE., Robson, JD., Bayandorian, I., Scamans, G. and et al. (2012) 'Influence of Lead on the Microstructure and Corrosion Behavior of Melt-Conditioned, Twin-Roll-Cast AZ91D Magnesium Alloy'. Corrosion, 68 (6). pp. 548 - 556. ISSN: 0010-9312
Nikbakht, R. and Assadi, H. (2012) 'Phase-field modelling of self-propagating high-temperature synthesis of NiAl'. Acta Materialia, 60 (10). pp. 4041 - 4053. ISSN: 1359-6454
Mendis, CL. and Manuel, MV. (2012) 'Corrosion and Surface Engineering of Magnesium: An Overview'. JOM, 64 (6). pp. 648 - 649. ISSN: 1047-4838
Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2012) 'Formation of microstructure in Al-Si alloys under ultrasonic melt treatment'. TMS Light Metals. pp. 999 - 1004. ISSN: 0147-0809
Nowak, M. and Nadendla, HB. (2012) 'Grain refiner for aluminium-silicon sand casting aloys'. TMS Light Metals. pp. 349 - 353. ISSN: 0147-0809
Pericleous, K., Lebon, B., Djambazov, G. and Patel, M. (2012) 'Mathematical modelling of a compressible oxygen jet interfacing with a free surface in a basic oxygen furnace for steel production'. TMS Annual Meeting. pp. 287 - 294.
Faraji, M., Eskin, DG. and Katgerman, L. (2012) 'Grain refinement in hypoeutectic Al-Si alloys using ultrasonic vibrations'. Foundry Trade Journal International, 186 (3694). pp. 119 - 123. ISSN: 1758-9789
Hosseini, SM., Alishahi, M., Najafizadeh, A. and Kermanpur, A. (2012) 'The improvement of ductility in nano/ultrafine grained low carbon steels via high temperature short time annealing'. Materials Letters, 74. pp. 206 - 208. ISSN: 0167-577X
Li, J., Wang, F., Weng, W., Zhang, Y., Wang, M. and Wang, H. (2012) 'Characteristic and mechanical properties of magnesium matrix composites reinforced with Mg2B2O5w and B4Cp'. Materials & Design, 37. pp. 533 - 536. ISSN: 0261-3069
Huang, Y. and Humphreys, FJ. (2012) 'Application of EBSD technique during SEM in-situ deformation'.RMS EBSD Workshop. Liverpool, UK. 12 - 12 April. [unpublished]
Meidani, H., Desbiolles, J-L., Jacot, A. and Rappaz, M. (2012) 'Three-dimensional phase-field simulation of micropore formation during solidification: Morphological analysis and pinching effect'. Acta Materialia, 60 (6-7). pp. 2518 - 2527. ISSN: 1359-6454
Basak, CB. and Kolokol, AS. (2012)
'A Novel Pseudo‐Ion Approach in Classical
Bagherpour, E., Reihanian, M. and Ebrahimi, R. (2012) 'On the capability of severe plastic deformation of twining induced plasticity (TWIP) steel'. Materials & Design (1980-2015), 36. pp. 391 - 395. ISSN: 0261-3069
Shi, Y-H., Durrell, JH., Dennis, AR., Hari Babu, N., Mancini, CE. and Cardwell, DA. (2012) 'Properties of grain boundaries in bulk, melt processed Y–Ba–Cu–O fabricated using bridge-shaped seeds'. Superconductor Science and Technology, 25 (4). pp. 045006 - 045006. ISSN: 0953-2048
Lebon, GSB., Patel, MK., Djambazov, G. and Pericleous, KA. (2012) 'Mathematical modelling of a compressible oxygen jet entering a hot environment using a pressure-based finite volume code'. Computers & Fluids, 59. pp. 91 - 100. ISSN: 0045-7930
Mendis, CL., Jhawar, HP., Sasaki, TT., Oh-ishi, K., Sivaprasad, K., Fleury, E. and et al. (2012) 'Mechanical properties and microstructures of Al–1Fe–(0-1)Zr bulk nano-crystalline alloy processed by mechanical alloying and spark plasma sintering'. Materials Science and Engineering: A, 541. pp. 152 - 158. ISSN: 0921-5093
Huang, Y. and Prangnell, PB. (2012) 'Dynamic Recovery during Low Temperature Deformation in an Al‐0.1 Mg Alloy'. TMS Annual Meeting. pp. 161 - 168.
Nowak, M. and Nadendla, HB. (2012) 'Grain Refiner for Aluminium‐Silicon Sand Casting Aloys', inLight Metals 2012. Wiley. pp. 349 - 353. ISBN 13: 9781118291399.
Pericleous, K., Lebon, B., Djambazov, G. and Patel, M. (2012) 'Mathematical Modeling of a Compressible Oxygen Jet Interacting with a Free Surface in a Basic Oxygen Furnace for Steel Production', in Nastac, L., Zhang, L., Thomas, BG., Sabau, A., ElKaddah, N., Powell, AC. and et al. (eds.) Cfd Modeling and Simulation in Materials Processing. Wiley. pp. 287 - 294. ISBN 13: 9781118296158.
Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2012) 'Formation of Microstructure in Al‐Si Alloys under Ultrasonic Melt Treatment'. Wiley. pp. 999 - 1004.
Huang, Y. and Prangnell, PB. (2012) 'Dynamic recovery during low temperature deformation in an Al-0.1Mg Alloy'.TMS 2012 Annual Meeting & Exibition on Materials Processing Fundamentals. Orlando, USA. 11 - 15 March.
Huang, Y. (2012) 'Magnesium alloys: opportunities and challenges'.Materials Knowledge Transfer Network Annual Meeting. London, UK. 4 - 4 March. [unpublished]
Lebon, GSB., Patel, MK. and Pericleous, KA. (2012) 'Investigation of Instabilities Arising with Non-Orthogonal Meshes Used in Cell Centred Elliptic Finite Volume Computations'. Journal of Algorithms & Computational Technology, 6 (1). pp. 129 - 152. ISSN: 1748-3018
Bayandorian, I., Huang, Y., Fan, Z., Pawar, S., Zhou, X. and Thompson, GE. (2012) 'The impact of melt-conditioned twin-roll casting on the downstream processing of an AZ31 magnesium alloy'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (3). pp. 1035 - 1047. ISSN: 1073-5623 Open Access Link
Huang, Y., Wang, L., Liu, Y. and Wu, JT. (2012) 'Investigation on hot corrosion resistance of a new directional solidification superalloy at 750°C'. Dongbei Daxue Xuebao Journal of Northeastern University, 33 (3). pp. 365 - 368. ISSN: 1005-3026
Fang, CM., van Huis, MA., Thijsse, BJ. and Zandbergen, HW. (2012) 'Stability and crystal structures of iron carbides: A comparison between the semi-empirical modified embedded atom method and quantum-mechanical DFT calculations'. Physical Review B, 85 (5). ISSN: 1098-0121
Li, HT., Wang, Y. and Fan, Z. (2012) 'Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al-Mg alloys'. Acta Materialia, 60 (4). pp. 1528 - 1537. ISSN: 1359-6454 Open Access Link
Ojaghi-Ilkhchi, M. and Assadi, H. (2012) 'Modelling of electroreduction of porous oxides in molten salt'. Computational Materials Science, 53 (1). pp. 1 - 5. ISSN: 0927-0256
Mendis, CL., Oh-ishi, K., Ohkubo, T. and Hono, K. (2012) 'Effect of Li additions on the age hardening response and precipitate microstructures of Mg–2.4Zn–0.16Zr based alloys'. Materials Science and Engineering: A, 535. pp. 122 - 128. ISSN: 0921-5093
Zhang, L., Eskin, DG., Miroux, AG. and Katgerman, L. (2012) 'On the mechanism of the formation of primary intermetallics under ultrasonic melt treatment in an Al-Zr-Ti alloy'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. 12 - 10 June. IOP Publishing. pp. 012002 - 012002. ISSN: 1757-8981
Subroto, TAS., Miroux, AG., Eskin, DG. and Katgerman, L. (2012) 'Constitutive behaviour of an as-cast AA7050 alloy in the sub-solidus temperature range'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. 12 - 10 June. IOP Publishing. pp. 012074 - 012074. ISSN: 1757-8981
Wang, Y., Li, H-T. and Fan, Z. (2012) 'Oxidation of Aluminium Alloy Melts and Inoculation by Oxide Particles'. Transactions of the Indian Institute of Metals. pp. 1 - 9. ISSN: 0972-2815
Huang, Y., Zahid, GH. and Prangnell, PB. (2012) 'Loss of High Angle Boundary Area during Annealing a Cryo-SPD Processed Al-Alloy with a Nano-Scale Lamellar Grain Structure'. Materials Science Forum, 715-716. pp. 219 - 226. ISSN: 0255-5476
Ji, S., Watson, D., Fan, Z. and White, M. (2012) 'Development of a super ductile diecast Al-Mg-Si alloy'. Materials Science and Engineering A. ISSN: 0921-5093
Li, H-T., Wang, Y. and Fan, Z. (2012) 'Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al-Mg alloys'. Acta Materialia, 60 (4). pp. 1528 - 1537. ISSN: 1359-6454
Sundaram, K., Babu, NH., Scamans, GM., Eskin, DG. and Fan, Z. (2012) 'Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content'. International Journal of Materials Research, 103 (10). pp. 1228 - 1234.
Xia, M., Huang, Y., Cassinath, Z. and Fan, Z. (2012) 'Rheo-extrusion of AZ91D'. Solid State Phenomena, 192-193. pp. 470 - 475.
Fan, Z. (2012) 'An Epitaxial Model for Heterogeneous Nucleation on Potent Substrates'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. pp. 1 - 10. ISSN: 1073-5623
Satya, SJ., Kumar, V., Barekar, NS., Biswas, K. and Dhindaw, BK. (2012) 'Microstructural Evolution Under Low Shear Rates During Rheo Processing of LM25 Alloy'. Journal of Materials Engineering and Performance. pp. 1 - 7. ISSN: 1059-9495 Open Access Link
Al-Helal, K., Stone, IC. and Fan, Z. (2012) 'Simultaneous Primary Si Refinement and Eutectic Modification in Hypereutectic Al-Si Alloys'. Transactions of the Indian Institute of Metals, 65 (6). pp. 1 - 5. ISSN: 0972-2815
Liu, D., Zuo, Y., Meng, W., Chen, M. and Fan, Z. (2012) 'Fabrication of biodegradable nano-sized β-TCP/Mg composite by a novel melt shearing technology'. Materials Science and Engineering C, 32 (5). pp. 1253 - 1258. ISSN: 0928-4931
Zhang, L., Subroto, T., Katgerman, L., Eskin, DG. and Miroux, A. (2012) 'Influence of melt feeding scheme and casting parameters during direct-chill casting on microstructure of an AA7050 billet'. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 43B (6). pp. 1565 - 1573. ISSN: 1073-5615 Open Access Link
Bayandorian, I., Stone, I., Huang, Y. and Fan, Z. (2012) 'Twin Roll Casting of Thin AZ31 Magnesium Alloy Strip with Uniform Microstructure and Chemistry'.Symposium on Magnesium Technology held during TMS Annual Meeting and Exhibition. Orlando, FL. Springer International Publishing. pp. 135 - 140. ISSN: 1545-4150
Zuo, YB., Jiang, B., Zhang, Y. and Fan, Z. (2012) 'Melt Conditioned DC (MC-DC) Casting of Magnesium Alloys'. Magnesium Technology. pp. 155 - 160. ISSN: 1545-4150
Eskin, DG. (2012) 'Recent trends in the science and technology of crystallization of aluminum alloys'. Metal Science and Heat Treatment, 53 (9-10). pp. 408 - 413. ISSN: 0026-0673
Belov, NA., Antipov, VV., Kaibyshev, RO. and Eskin, DG. (2012) 'International conference on aluminum alloys ICAA12'. Metal Science and Heat Treatment, 53 (9-10). pp. 405 - 407. ISSN: 0026-0673
Katgerman, L. and Eskin, DG. (2012) 'Structure and Defect Formation during DC Casting of Aluminium Alloys'. Materials Science Forum, 710. pp. 43 - 49. ISSN: 0255-5476
Belov, NA., Antipov, VV., Kaibyshev, RO. and Eskin, DG. (2012) 'International conference on aluminum alloys ICAA12 - Resume of ICAA12'. Metal Science and Heat Treatment. pp. 1 - 3. ISSN: 0026-0673
Huang, Y. and Humphreys, FJ. (2012) 'The effect of solutes on grain boundary mobility during recrystallization and grain growth in some single-phase aluminium alloys'. Materials Chemistry and Physics, 132 (1). pp. 166 - 174. ISSN: 0254-0584
Parvin, N. and Rahimian, M. (2012) 'The Characteristics of Alumina Particle Reinforced Pure Al Matrix Composite'.1st International Congress on Advances in Applied Physics and Materials Science (APMAS). Antalya, TURKEY. Institute of Physics, Polish Academy of Sciences. pp. 108 - 110. ISSN: 0587-4246