Naseri, M., Imantalab, O., Gholami, D., Hosseini, S., Alvand, M., Amra, M., Lin, Y-C., Dana, MM., Borhani, E. and Mourad, AHI. et al. (2024) 'Elucidating the effect of accumulative roll bonding deformation routes on the electrochemical and passive behavior of AA2024 aluminum alloy'. Colloids and Surfaces A Physicochemical and Engineering Aspects, 705 (20 January 2025). pp. 1 - 10. ISSN: 0927-7757

Ji, S., Niu, Z., Dong, X. and Zhu, X. (2024) 'Integrated Structural Casting Development with Digital Twin Technology'.The 75th World Foundry Congress. Deyang, Sichuan, China. 25 - 30 October. 75th World Foundry Congress Wfc 2024. pp. 744 - 745.Open Access Link

Yang, W. and Ji, S. (2024) 'Effect of Convection Solidification on the Halo Formation in Zn-Al Alloys'.The 75th World Foundry Congress. Deyang, Sichuan, China. 25 - 30 October. 75th World Foundry Congress Wfc 2024. pp. 116 - 117.Open Access Link

Dong, X., Ji, S. and Shan, Z. (2024) 'Development of High Temperature Die-Cast Magnesium Alloys for Small IC Engine Application'.The 75th World Foundry Congress. Deyang, Sichuan, China. 25 - 30 October. 75th World Foundry Congress (WFC2024). pp. 620 - 621.Open Access Link

Naseri, M., Imantalab, O., Gholami, D., Hosseini, S., Alvand, M., Amra, M., Lin, Y-C., Dana, MM., Borhani, E. and Mourad, A-HI. et al. (2024) 'Elucidating the effect of strain path-dependent crystallographic texture evolution on the electrochemical behavior of nanostructured AA2024 aluminum alloy'. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 705 (Part 1 (20 January 2025)). pp. 1 - 10. ISSN: 0927-7757

Daneshian, B., Gärtner, F., Assadi, H., Höche, D., Klassen, T. and Weber, WE. (2024) 'Influence of Binding Energies on Required Process Conditions in Aerosol Deposition'. Journal of Thermal Spray Technology, 33 (7). pp. 2301 - 2322. ISSN: 1059-9630 Open Access Link

Lu, J., Lordan, E., Zhang, Y., Fan, Z., Wang, W. and Dou, K. (2024) 'The Evolution of Dilatant Shear Bands in High-Pressure Die Casting for Al-Si Alloys'. Materials, 17 (20). pp. 1 - 13. ISSN: 1996-1944 Open Access Link

Que, Z., Fang, C., xia, J. and Fan, Z. (2024) 'Influences of Zr and V addition on the crystal chemistry of θ-Al13Fe4 and the grain refinement of α-Al in an Al-4Fe alloy based on experiment and first-principles’ calculations'. Crystals, 14 (10). pp. 1 - 17.Open Access Link

Zai, L., Tong, X., Wang, Y., Zhang, H. and Xue, X. (2024) '低合金化镁合金熔化焊接组织调控的研究进展 = Research progress on microstructure control in fusion welding of low-alloyed Mg alloys'. Zhongguo Youse Jinshu Xuebao Chinese Journal of Nonferrous Metals, 34 (10). pp. 3193 - 3208. ISSN: 1004-0609 Open Access Link

Naseri, M., Myasnikova, A., Imantalab, O., Gholami, D., Mikhailov, D., Amra, M., Shaburova, N., Orlov, A., Hosseini, S., Lin, YC., Borhani, E., I Mourad, AH. and Trofimov, E. et al. (2024) 'Ultrahigh hardness with exceptional wear resistance of novel cost-effective nanostructured Fe40Ni25Cr25Mo5Al5 high-entropy alloy through cyclic closed-die forging process'. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 703 (Part 2). pp. 1 - 10. ISSN: 0927-7757

Zai, L., Tong, X., Wang, Y. and Xue, X-H. (2024) 'Effect of addition temperature on dispersion behavior and grain refinement efficiency of MgO introduced into Mg alloy'. Transactions of Nonferrous Metals Society of China, 34 (8). pp. 2491 - 2506. ISSN: 1003-6326 Open Access Link

Zhu, M., Zhang, M., Wang, J., Wen, T., Yang, F., He, Z., Qiu, D., Zhang, L., Ji, S. and Yang, H. et al. (2024) 'Microstructural evolution and strength enhancement in laser powder bed fusion Al-Mg-Yb-Zr alloys'. Journal of Alloys and Compounds, 1008. pp. 1 - 12. ISSN: 0925-8388 Open Access Link

Naseri, M., Myasnikova, A., Imantalab, O., Gholami, D., Mikhailov, D., Amra, M., Shaburova, N., Orlov, A., Hosseini, S., Lin, Y-C., Borhani, E., Mourad, A-HI. and Trofimov, E. et al. (2024) 'Microstructure refinement and wear resistance enhancement of cost-effective Fe50−2xMn30Co10Cr10NixCux (x = 0, 5 at%) high-entropy alloys through cyclic closed-die forging process'. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 703. pp. 1 - 10. ISSN: 0927-7757

Bagherpour, E. (2024) 'Keynote Speaker: Advances in Understanding Strain Reversal Effects in Deformed Metals and Alloys'.ANE Global Meeting and Expo on Materials Science and Nano Science (MSNMEET 2025). London. [unpublished]

Fang, C., Que, Z. and Fan, Z. (2024) 'Effects of Si Solution on Stability of Early 3d Transition-Metal Tri-Aluminides, Al3T (T = Sc, Ti and V)'. Journal of Metals, 77 (3). pp. 1091 - 1102. ISSN: 1047-4838 Open Access Link

He, Z., Wang, J., Zhu, M., Wen, T., Yang, F., Ji, S., Zheng, J., Shan, L. and Yang, H. et al. (2024) 'Effects of In Situ TiB2 on the Microstructural Evolution, Mechanical Properties, and Friction Behavior of the Al-Si-Cu Alloys Processed by Laser Powder-Bed Fusion'. Metals, 14 (9). pp. 1 - 18.Open Access Link

Naseri, M., Myasnikova, A., Gholami, D., Imantalab, O., Mikhailov, D., Amra, M., Shaburova, N., Efimova, M., Orlov, A., Hosseini, S., Lin, Y-C., Mourad, A-HI. and Trofimov, E. et al. (2024) 'Regulating of wear properties through microstructure engineering in novel cost-effective Fe30Ni25Cr25Mo10Al10 high-entropy alloy processed by cyclic closed-die forging'. Journal of Alloys and Metallurgical Systems, 7. pp. 1 - 10. ISSN: 2949-9178 Open Access Link

Karakurt, EM., Huang, Y., Cetin, Y., Incesu, A., Demirtas, H., Kaya, M., Yildizhan, Y., Tosun, M. and Akbas, G. et al. (2024) 'Assessing Microstructural, Biomechanical, and Biocompatible Properties of TiNb Alloys for Potential Use as Load-Bearing Implants'. Journal of Functional Biomaterials, 15 (9). pp. 1 - 17. ISSN: 2079-4983 Open Access Link

Fang, C. (2024) 'Effect of Lattice Misfit on the Stability of the Misfit Layer Compound (SnS)1+xNbS2'. Crystals, 14 (9). pp. 1 - 13.Open Access Link

Wang, S., Wang, Y., Zhang, Y., Wang, F., Hashimoto, T., Zhou, X., Fan, Z. and Ramasse, Q. et al. (2024) 'Segregation of Mg at TiB2/Al interface mitigating the Zr-poisoning effect'. Scripta Materialia, 253. pp. 1 - 6. ISSN: 1359-6462 Open Access Link

Moazzen, P., Toroghinejad, MR., Zargar, T., Sadeghi, F. and Mohammadi, M. (2024) 'Tuning mechanical behavior of an FCC high entropy alloy: Insights from roll deformation and texture'. Materials Science and Engineering: A, 913. pp. 1 - 14. ISSN: 0921-5093 Open Access Link

Eskin, DG. (2024) 'Conversion of Aluminum to Hydrogen: A Metallurgical Point of View'. Advanced Engineering Materials, 26 (23). pp. 1 - 5. ISSN: 1438-1656 Open Access Link

Benmabrouk, S., Vieille, B., Keller, C., Joshi, SS. and Hug, E. (2024) 'Fracture behavior of a Ni-20 wt.%Cr binary alloy processed by Laser Powder Bed Fusion: Influence of the specimen building orientation and rotation angle between layers'. Engineering Fracture Mechanics, 307. pp. 1 - 15. ISSN: 0013-7944

Wen, T., Li, Z., Wang, J., Yang, F., Zhu, M., Luo, Y., Zhang, L., Liu, Z., Qiu, D., Yang, H. and Ji, S. et al. (2024) 'CALPHAD aided design of a crack-free Al-Mg-Si-Ti alloy with high strength: heterogeneous nucleation and eutectic filling during additive manufacturing'. Virtual and Physical Prototyping, 19 (1). pp. 1 - 13. ISSN: 1745-2759 Open Access Link

Chankitmunkong, S., Eskin, DG., Patakham, U., Chancharoen, W., Seehanam, S., Limmaneevichitr, C. and Pandee, P. et al. (2024) 'The improvement of deformability in AA7075 alloy through cryogenic treatment and its correlation with microstructural evolution and FE modelling'. Scientific Reports, 14 (1). pp. 1 - 10. ISSN: 2045-2322 Open Access Link

Men, H. (2024) 'A joint diffusion/collision model for crystal growth in pure liquid metals'. Nature Communications, 15 (1). pp. 1 - 13. ISSN: 2041-1723 Open Access Link

Holroyd, NJH., Burnett, TL., Lewandowski, JJ. and Scamans, GM. (2024) 'Crack initiation during environment-induced cracking of metals: current status'. Corrosion Reviews, 42 (5). pp. 523 - 542. ISSN: 0334-6005 Open Access Link

Wiese, B., Mendis, CL., Tolnai, D. and Hort, N. (2024) 'Interactions of CaO with pure Mg and Mg-Ca alloys—an in situ synchrotron radiation diffraction study'. Journal of Physics: Materials, 7 (3). pp. 1 - 11.Open Access Link

Ignacio Ahuir-Torres, J., Yang, X., West, G. and Kotadia, HR. (2024) 'Corrosion behaviour of SiC particulate reinforced AZ31 magnesium matrix composite in 3.5 % NaCl with and without heat treatment'. Materials Chemistry and Physics, 320. pp. 129467 - 129467. ISSN: 0254-0584

Birchall, A., Chang, ITH., Wang, Z. and Babatti, C. (2024) 'Data-Driven Delta Machine Learning Models for Improved Extrapolation'.International Conference on Aluminium Alloys. Atlanta, GA, USA. 27 - 23 June.Open Access Link

Hosseini, S., Mendis, C., Chang, I. and Fan, Z. (2024) 'Dependence of thermomechanical response on Cu content in a hardenable Al-Si-Mg alloy'.The 19th International Conference on Aluminium Alloys (ICAA19). Atlanta, US. 23 - 27 June.Open Access Link

Yang, F-P., Wen, T., Zhang, L., Wang, J-Y., Huang, S-L., Ji, S-X. and Yang, H-L. et al. (2024) 'Role of inclination angle on columnar-to-equiaxed transition in the eutectic Al-5Mg-2Si alloy fabricated by laser powder bed fusion'. Journal of Central South University, 31 (7). pp. 2150 - 2166. ISSN: 2095-2899

Kaur, A., Morton, JA., Tyurnina, AV., Priyadarshi, A., Ghorbani, M., Mi, J., Porfyrakis, K., Eskin, DG. and Tzanakis, I. et al. (2024) 'Dual frequency ultrasonic liquid phase exfoliation method for the production of few layer graphene in green solvents'. Ultrasonics Sonochemistry, 108. pp. 1 - 11. ISSN: 1350-4177 Open Access Link

Wang, A., Wang, J., Yang, F., Wen, T., Zhu, M., Luo, Y., Ji, S. and Yang, H. et al. (2024) 'Laser-powder bed fusion of Y₂O₃ nanoparticle modified CoCrNi matrix composites: Parameter optimization, microstructural evolution and strengthening mechanisms'. Materials Science and Engineering: A, 910. pp. 146822 - 146822. ISSN: 0921-5093

Zai, L., Tong, X., Wang, Y., Zhang, H. and Xue, X. (2024) 'Achieving columnar-to-equiaxed transition to reduce hot cracking susceptibility in TIG-welded AZ31 alloy through MgO modification'. Journal of Materials Science, 59 (21). pp. 9361 - 9370. ISSN: 0022-2461

Vadakke Madam, S., Manani, S. and Eskin, DG. (2024) 'Microstructural Evolution and Property Evaluation of In Situ Al–MgAl2O4 Nanocomposite Prepared by γ-Al2O3 and Ultrasonication-Assisted Impeller Mixing'. Advanced Engineering Materials, 26 (13). pp. 1 - 10. ISSN: 1438-1656 Open Access Link

Bendo, A., Fellowes, J., Smith, M., Moshtaghi, M., Jin, Z., Matsuda, K., Fan, Z. and Zhou, X. et al. (2024) 'Solute micro-segregation profile and associated precipitation in cast Al-Mg-Si alloy'. Philosophical Magazine, 104 (19-20). pp. 801 - 827. ISSN: 1478-6435 Open Access Link

Wen, T., Li, Z., Wang, J., Luo, Y., Yang, F., Liu, Z., Qiu, D., Yang, H. and Ji, S. et al. (2024) 'From crack-prone to crack-free: Eliminating cracks in additively manufacturing of high-strength Mg₂Si-modified Al-Mg-Si alloys'. Journal of Materials Science and Technology, 204. pp. 276 - 291. ISSN: 1005-0302

Zhou, M., Gharavian, S., Birchall, A., Alizadeh, A., Assadi, H., Chang, I. and Barbatti, C. et al. (2024) 'Intelligent processing and development of high-performance automotive aluminum alloys: Application of physics-based and data-driven modeling', in Zikry, MA. (ed.) Innovative Lightweight and High-Strength Alloys: Multiscale Integrated Processing, Experimental, and Modeling Techniques. Cambridge, MA, USA : Elsevier. pp. 257 - 322. ISBN 10: 0-323-99540-3. ISBN 13: 978-0-323-99539-9. Open Access Link

Zai, L., Tong, X., Wang, Y., Zhang, H. and Xue, X. (2024) 'Exceptional grain refinement induced by dispersed MgO particles in TIG-welded AZ31 alloy'. Journal of Materials Science and Technology, 205. pp. 1 - 13. ISSN: 1005-0302

Wang, J., Zeng, L., Xia, M., Ji, S., Zhang, Z., Liang, J., Bao, W., Xie, G. and Li, J. et al. (2024) 'Vanadium dioxide/aluminum composites for adaptive infrared stealth'. Ceramics International, 0 (in press, corrected proof). pp. 25034 - 25040. ISSN: 0272-8842 Open Access Link

Que, Z., Wang, Y., Fan, Z., Hashimoto, T. and Zhou, XR. (2024) 'Composition templating for heterogeneous nucleation of intermetallic compounds'. Scientific Reports, 14 (1). pp. 1 - 19. ISSN: 2045-2322 Open Access Link

Kangazian, J., Kermanpur, A., Shamanian, M., Badrossamay, M., Foroozmehr, E. and Sadeghi, F. (2024) 'Synergic effects of scanning pattern and heat treatment on the microstructure-hot tensile behavior relationships of powder bed fusion-laser beam manufactured Hastelloy X'. Journal of Materials Science, 59 (17). pp. 7428 - 7456. ISSN: 0022-2461

Yu, K., Wu, Y., Lebon, GSB., Patel, JB., Fan, Z. and Li, H-T. (2024) 'Modeling of the Sump Profile During DC and MC-DC Casting Based on a Functional Packing Fraction'. JOM, 76 (12). pp. 6954 - 6961. ISSN: 1047-4838

Cai, Q., Rey Rodriguez, P., Carracelas Santos, S., Castro, G., Mendis, CL., Chang, ITH. and Assadi, H. et al. (2024) 'Crack healing via electropulsing treatment applied to additive-manufactured TiC/316L stainless steel composites'. Materials Letters, 365. pp. 1 - 5. ISSN: 0167-577X Open Access Link

Wang, S., Wang, Y., Ramasse, QM. and Fan, Z. (2024) 'Grain refinement of Mg-Ca alloys by native MgO particles'. Journal of Magnesium and Alloys, 12 (3). pp. 980 - 996. ISSN: 2213-9567 Open Access Link

Li, T., Zhu, X., Gao, Y., Shan, L., Davies, JMT. and Ji, S. (2024) 'On Sc Addition in A206 Alloy: The Formation of W-AlCuSc Phase and Its Strength-Weakening Effect in Sand Castings'. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 0 (ahead of print). pp. 1 - 17. ISSN: 1073-5615 Open Access Link

Men, H. (2024) 'A molecular dynamics study on the boundary between homogeneous and heterogeneous nucleation'. Journal of Chemical Physics, 160 (9). pp. 1 - 14. ISSN: 0021-9606 Open Access Link

Valizadeh, A., Sahara, R. and Souissi, M. (2024) 'Alloys innovation through machine learning: a statistical literature review'. Science and Technology of Advanced Materials: Methods, 0 (ahead of print).Open Access Link

Feng, L., Dong, X., Cai, Q. and Ji, S. (2024) 'Microstructure and Tensile Properties of HPDC Mg–RE Alloys with Varying Y Additions'. International Journal of Metalcasting, 0 (ahead of print). pp. 1 - 14. ISSN: 1939-5981 Open Access Link

Priyadarshi, A., Bin Shahrani, S., Choma, T., Zrodowski, L., Qin, L., Leung, CLA., Clark, SJ., Fezzaa, K., Mi, J., Lee, PD., Eskin, D. and Tzanakis, I. et al. (2024) 'New insights into the mechanism of ultrasonic atomization for the production of metal powders in additive manufacturing'. Additive Manufacturing, 83. pp. 1 - 20. ISSN: 2214-7810 Open Access Link