Scamans, G. and Hall, A. (2015) 'Aluminum ABS for lightweighting: Recycling critical for future growth'. Light Metal Age, 73 (5). pp. 6 - 17. ISSN: 0024-3345

Abouarkoub, A., Thompson, GE., Zhou, X., Hashimoto, T. and Scamans, G. (2015) 'The Influence of Prolonged Natural Aging on the Subsequent Artificial Aging Response of the AA6111 Automotive Alloy'. Metallurgical and Materials Transactions A, 46 (9). pp. 4380 - 4393. ISSN: 1073-5623

Ji, S., Fan, Z. and Yan, F. (2015) 'A high strength cast aluminium alloy for high pressure die casting'. Available at: https://doi.org/10.1002/9781119274780.ch35.

Yang, H., Yang, H., Ji, S., Watson, D., Watson, D. and Fan, Z. (2015) 'Repeatability of tensile properties in high pressure die-castings of an Al-Mg-Si-Mn alloy'. Metals and Materials International, 21 (5). pp. 936 - 943. ISSN: 1598-9623 Open Access Link

Li, W-F., Fang, C-M., Dijkstra, M. and van Huis, MA. (2015) 'The role of point defects in PbS, PbSe and PbTe: a first principles study'. Journal of Physics: Condensed Matter, 27 (35). pp. 1 - 14. ISSN: 0953-8984 Open Access Link

Yang, H., Ji, S., Yang, W., Wang, Y. and Fan, Z. (2015) 'Effect of Mg level on the microstructure and mechanical properties of die-cast Al-Si-Cu alloys'. Materials Science and Engineering A, 642. pp. 340 - 350. ISSN: 0921-5093

Nadendla, H. (2015) 'AL-NB-B MASTER ALLOY FOR GRAIN REFINING'.

Li, J., Zhou, L. and Huang, Y. (2015) 'Microstructures and corrosion behaviour of an Mg-3Zn-0.5Zr/5HA composite prepared by casting and plastic deformation'. European Cells and Materials, 30 (Suppl.3). pp. 10 - 10. ISSN: 1473-2262

da Silva, M., Rebolledo, L., Pabel, T., Petkov, T., Planta, X., Tort, J. and Eskin, D. et al. (2015) 'Evaluation of the Effect of Ultrasonic Degassing on Components Produced by Low Pressure Die Casting'. International Journal of Cast Metals Research, 28 (4). pp. 193 - 200. ISSN: 1743-1336 Open Access Link

Ji, SX., Yan, F. and Fan, ZY. (2015) 'Casting development with a high strength aluminium alloy'. Materials Science Forum, 828-829. pp. 9 - 14. ISSN: 0255-5476 Open Access Link

Dong, X., He, L., Huang, X. and Li, P. (2015) 'Coupling analysis of the electromagnetic transport of liquid aluminum alloy during casting'. Journal of Materials Processing Technology, 222. pp. 197 - 205. ISSN: 0924-0136

Dong, X., He, L., Huang, X. and Li, P. (2015) 'Effect of electromagnetic transport process on the improvement of hydrogen porosity defect in A380 aluminum alloy'. International Journal of Hydrogen Energy, 40 (30). pp. 9287 - 9297. ISSN: 0360-3199

Wang, H., Hou, L., Zhang, J., Lu, L., Cui, H. and Zhang, J. (2015) 'The secondary precipitates of niobium-alloyed M3:2 high speed steel prepared by spray deposition'. Materials Characterization, 106. pp. 245 - 254. ISSN: 1044-5803

Garces, G., Morris, DG., Muñoz-Morris, MA., Perez, P., Tolnai, D., Mendis, C., Stark, A., Lim, HK., Kim, S., Shell, N. and Adeva, P. et al. (2015) 'Plasticity analysis by synchrotron radiation in a Mg97Y2Zn1 alloy with bimodal grain structure and containing LPSO phase'. Acta Materialia, 94. pp. 78 - 86. ISSN: 1359-6454

Balart, MJ., Patel, JB., Gao, F. and Fan, Z. (2015) 'Grain refinement of DHP copper by elemental additions'. International Journal of Cast Metals Research, 28 (4). pp. 248 - 256. ISSN: 1364-0461

Huang, Y. and Fan, ZY. (2015) 'Microstructure and Texture Development during Melt Conditioned Twin Roll Casting and Downstream Processing in an AZ31 Magnesium Alloy'. Materials Science Forum, 828-829. pp. 87 - 92. ISSN: 0255-5476

Balart, MJ., Patel, JB. and Fan, Z. (2015) 'Grain refinement of DHP copper by particle inoculation'. International Journal of Cast Metals Research, 28 (4). pp. 242 - 247. ISSN: 1364-0461

Bolzoni, L. and Hari Babu, N. (2015) 'Refinement of the grain size of the LM25 Alloy (A356) by 96Al-2Nb-2B Master Alloy'. Journal of Materials Processing Technology, 222. pp. 219 - 223. ISSN: 1873-4774 Open Access Link

Eskin, D., Al-Helal, K. and Tzanakis, I. (2015) 'Application of a plate sonotrode to ultrasonic degassing of aluminum melt: acoustic measurements and feasibility study'. Journal of Materials Processing Technology, 222. pp. 148 - 154. ISSN: 1873-4774 Open Access Link

Lu, L., Hou, L., Wang, H., Zhang, J., Cui, H., Huang, J., Zhang, Y. and Zhang, J. et al. (2015) 'Hot deformation of spray-formed Nb-containing high speed steel-a study using processing map'. Cailiao Yanjiu Xuebao Chinese Journal of Materials Research, 29 (7). pp. 496 - 504. ISSN: 1005-3093

Huang, Y. (2015) 'Grain refinement during ECAP in aluminium'.Inter Symposium on Recent Development in Severe Plastic Deformation. Shenyang, China. 10 - 10 July. [unpublished]

Basak, CB. and Krishnan, M. (2015) 'Applicability of Scheil–Gulliver solidification model in real alloy: a case study with Cu-9wt%Ni-6wt%Sn alloy'. Philosophical Magazine Letters, 95 (7). pp. 376 - 383. ISSN: 0950-0839

Huang, Y. and Fan, Z. (2015) 'Microstructure and texture development during melt conditioned twin roll casting and downstream processing in an AZ31 magnesium alloy'.7th Light Metal Technology Conference 2015. Port Elizabeth, South Africa. 1 - 29 July.

Mi, J. and Eskin, D. (2015) 'Foreword'. Springer Science and Business Media LLC. pp. 2850 - 2850. ISSN: 1073-5623

Zou, J., Ainslie, MD., Fujishiro, H., Bhagurkar, AG., Naito, T., Hari Babu, N., Fagnard, J-F., Vanderbemden, P. and Yamamoto, A. et al. (2015) 'Numerical modelling and comparison of MgB₂bulks fabricated by HIP and infiltration growth'. Superconductor Science and Technology, 28 (7). pp. 075009 - 075009. ISSN: 0953-2048

Shi, L-L., Huang, Y., Yang, L., Feyerabend, F., Mendis, C., Willumeit, R., Ulrich Kainer, K. and Hort, N. et al. (2015) 'Mechanical properties and corrosion behavior of Mg–Gd–Ca–Zr alloys for medical applications'. Journal of the Mechanical Behavior of Biomedical Materials, 47. pp. 38 - 48. ISSN: 1751-6161

Hosseini, SM. and Habibolahzadeh, A. (2015) 'Investigation of nano-SiCp effect on microstructure and mechanical properties of Al/TiH2 foam precursor produced via ARB process'. Materials Science and Engineering: A, 639. pp. 80 - 88. ISSN: 0921-5093

Buzolin, RH., Tolnai, D., Mendis, CL., Stark, A., Schell, N., Pinto, H., Kainer, KU. and Hort, N. et al. (2015) 'In situ synchrotron radiation diffraction study of the role of Gd, Nd on the elevated temperature compression behavior of ZK40'. Materials Science and Engineering: A, 640. pp. 129 - 136. ISSN: 0921-5093

Fang, C., Van Blaaderen, A. and Van Huis, MA. (2015) 'Two-Dimensional Hydrous Silica: Nanosheets and Nanotubes Predicted from First-Principles Simulations'. The Journal of Physical Chemistry C, 119 (25). pp. 14343 - 14350. ISSN: 1932-7447

Peng, T. and Chang, I. (2015) 'Uniformly dispersion of carbon nanotube in aluminum powders by wet shake-mixing approach'. Powder Technology, 284. pp. 32 - 39. ISSN: 0032-5910

Ji, S., Yang, W. and Gao, F. (2015) 'Formation and sedimentation of Fe-rich intermetallics in Al−Si−Cu−Fe alloy'. Trans. Nonferrous Met. Soc. China, 25 (5). pp. 1704 - 1714. ISSN: 1003-6326 Open Access Link

Hintzsche, LE., Fang, CM., Marsman, M., Lamers, MWPE., Weeber, AW. and Kresse, G. (2015) 'Formation of a Positive Fixed Charge atc−Si(111)/a−Si3N3.5:HInterfaces'. Physical Review Applied, 3 (6). ISSN: 2331-7019

Bojarevics, V., Djambazov, G., Lebon, GSB. and Pericleous, KA. (2015) 'Contactless ultrasonic treatment of melts using EM induction'. IOP Conference Series: Materials Science and Engineering, 84 (1). pp. 012017 - 012017. ISSN: 1757-8981

Bolzoni, L., Nowak, M. and Hari Babu, N. (2015) 'On the effect of Nb-based compounds on the microstructure of Al-12Si alloy'. Materials Chemistry and Physics, 162. pp. 340 - 345. ISSN: 0254-0584 Open Access Link

Florica, C., Costas, A., Boni, AG., Negrea, R., Ion, L., Preda, N., Pintilie, L. and Enculescu, I. et al. (2015) 'Electrical properties of single CuO nanowires for device fabrication: Diodes and field effect transistors'. Applied Physics Letters, 106 (22). ISSN: 0003-6951

Chirila, C., Boni, AG., Pasuk, I., Negrea, R., Trupina, L., Le Rhun, G., Yin, S., Vilquin, B., Pintilie, I. and Pintilie, L. et al. (2015) 'Comparison between the ferroelectric/electric properties of the PbZr0.52Ti0.48O3 films grown on Si (100) and on STO (100) substrates'. Journal of Materials Science, 50 (11). pp. 3883 - 3894. ISSN: 0022-2461

Acsente, T., Negrea, RF., Nistor, LC., Logofatu, C., Matei, E., Birjega, R., Grisolia, C. and Dinescu, G. et al. (2015) 'Synthesis of flower-like tungsten nanoparticles by magnetron sputtering combined with gas aggregation'. The European Physical Journal D, 69 (6). ISSN: 1434-6060

Bhagurkar, AG., Hari Babu, N., Dennis, AR., Durrell, JH. and Cardwell, DA. (2015) 'Characterization of bulk MgB2 synthesized by infiltration and growth'. IEEE Transactions on Applied Superconductivity, 25 (3). pp. 1 - 4. ISSN: 1051-8223 Open Access Link

Ji, S. (2015) 'A method of making a case of a heat exchanger'. AL AT BE BG CH CY CZ DE DK EE ES FI FR GB GR HR HU IE IS IT LI LT LU LV MC MK MT NL NO PL PT RO RS SE SI SK SM TR.

Huang, Y., Liu, D., Anguilano, L., You, C. and Chen, M. (2015) 'Fabrication and characterization of a biodegradable Mg-2Zn-0.5Ca/1β-TCP composite'. Materials Science and Engineering C, 54. pp. 120 - 132. ISSN: 0928-4931

Tzanakis, I., Xu, WW., Eskin, DG., Lee, PD. and Kotsovinos, N. (2015) 'In situ observation and analysis of ultrasonic capillary effect in molten aluminium'. Ultrasonics Sonochemistry, 27. pp. 72 - 80. ISSN: 1350-4177 Open Access Link

Das, S., Barekar, N., El Fakir, O., Yang, X., Dear, JP. and Fan, Z. (2015) 'Erratum to "Influence of intensive melt shearing on subsequent hot rolling and the mechanical properties of twin roll cast AZ31 strips" [Mater. Lett. 144 (2015) 54–57]'. Materials Letters, 147. pp. 131 - 131. ISSN: 0167-577X

Rahimian, M., Milenkovic, S., Maestro, L., De Azua, AER. and Sabirov, I. (2015) 'Physical Simulation of Investment Casting of Complex Shape Parts'. Metallurgical and Materials Transactions A, 46 (5). pp. 2227 - 2237. ISSN: 1073-5623

Borchers, C., Stoltenhoff, T., Hahn, M., Schulze, M., Assadi, H., Suryanarayana, C., Gärtner, F. and Klassen, T. et al. (2015) 'Strain‐Induced Phase Transformation of MCrAlY'. Advanced Engineering Materials, 17 (5). pp. 723 - 731. ISSN: 1438-1656

Zhu, YM., Weyland, M., Medhekar, NV., Dwyer, C., Mendis, CL., Hono, K. and Nie, JF. et al. (2015) 'On the prismatic precipitate plates in Mg–Ca–In alloys'. Scripta Materialia, 101. pp. 16 - 19. ISSN: 1359-6462

Mollick, PK., Venugopalan, R., Roy, M., Rao, PT., Sathiyamoorthy, D., Sengupta, P., Sharma, G., Basak, CB. and Chakravartty, JK. et al. (2015) 'Deposition of diversely textured buffer pyrolytic carbon layer in TRISO coated particle by controlled manipulation of spouted bed hydrodynamics'. Chemical Engineering Science, 128. pp. 44 - 53. ISSN: 0009-2509

Jain, SK., Barkema, GT., Mousseau, N., Fang, C-M. and van Huis, MA. (2015) 'Strong Long-Range Relaxations of Structural Defects in Graphene Simulated Using a New Semiempirical Potential'. The Journal of Physical Chemistry C, 119 (17). pp. 9646 - 9655. ISSN: 1932-7447

Nowak, M., Bolzoni, L. and Nadendla, HB. (2015) 'The Effect of Nb-B Inoculation on Binary Hypereutectic and Near-eutectic LM13 Al-Si Cast Alloys'. Journal of Alloys and Compounds, 641. pp. 22 - 29. ISSN: 1873-4669 Open Access Link

Pawar, S., Zhou, X., Hashimoto, T., Thompson, GE., Scamans, G. and Fan, Z. (2015) 'Investigation of the microstructure and the influence of iron on the formation of Al8Mn5 particles in twin roll cast AZ31 magnesium alloy'. Journal of Alloys and Compounds, 628. pp. 195 - 198. ISSN: 0925-8388

Lázaro, J., Solórzano, E., Rodríguez Pérez, MA. and García-Moreno, F. (2015) 'Pore connectivity of aluminium foams: effect of production parameters'. Journal of Materials Science, 50 (8). pp. 3149 - 3163. ISSN: 0022-2461

Qiao, H., Zhu, X., Gao, T., Wu, Y. and Liu, X. (2015) 'Influence of Deformation on the Microstructure and Low-temperature Refining Behavior of Al–3.5P Master Alloy'. Journal of Materials Science & Technology, 31 (4). pp. 391 - 396. ISSN: 1005-0302