Singh, V., Banerjee, P., Srinivas, V., Babu, NH., Ghoshray, A., Bandyopadhyay, B. and Mazumdar, C. et al. (2011) 'Structural and Magnetic Properties of Ni Rich Amorphous Boride Nanoparticles'.INTERNATIONAL CONFERENCE ON MAGNETIC MATERIALS (ICMM-2010). Kolkata, INDIA. AIP. pp. 256 - 259. ISSN: 0094-243X

Qin, T. and Fan, Z. (2011) 'Reconstruction of 2D Al Ti on TiB in an aluminium melt'. IOP Conference Series: Materials Science and Engineering, 27 (1). pp. 012004 - 012004. ISSN: 1757-8981 Open Access Link

Poole, AD., Chang, ITH., Lewington, AJ. and Hirst, T. (2011) 'Low temperature transient liquid phase sintering of 7075 aluminium alloy'. Proceedings of the Euro International Powder Metallurgy Congress and Exhibition Euro Pm 2011.

Fang, CM., Sluiter, MHF., van Huis, MA., Ande, CK. and Zandbergen, HW. (2011) 'The origin of predominance of cementite among iron carbides in steel at elevated temperature'. Springer Science and Business Media LLC. pp. 13 - 18. ISSN: 0272-9172

Kutty, TRG., Basak, CB., Kumar, A. and Kamath, HS. (2011) 'Creep behaviour of δ-phase of U–Zr system by impression creep technique'. Journal of Nuclear Materials, 408 (1). pp. 90 - 95. ISSN: 0022-3115

Eskin, DG., Lalpoor, M. and Katgerman, L. (2011) 'COLD CRACKING DURING DIRECT-CHILL CASTING'.Symposium on Light Metals / TMS 140th Annual Meeting and Exhibition. San Diego, CA. 1 - 3 March. JOHN WILEY & SONS. pp. 669 - 674. ISSN: 0147-0809

Mendis, CL., Oh-ishi, K., Ohkubo, T. and Hono, K. (2011) 'Precipitation of prismatic plates in Mg–0.3Ca alloys with In additions'. Scripta Materialia, 64 (2). pp. 137 - 140. ISSN: 1359-6462

Ji, S., Fredriksson, H. and Fan, Z. (2011) 'Halo characteristics of Zn-Al Alloy during solidification under intensive convention'. Metallurgical and Materials Transactions A.

Zuo, YB., Jiang, B., Zhang, Y. and Fan, Z. (2011) 'Grain refinement of DC cast magnesium alloys with intensive melt shearing'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. IOP Publishing. pp. 012043 - 012043. ISSN: 1757-8981 Open Access Link

Mehrara, H., Santillana, B., Eskin, DG., Boom, R., Katgerman, L. and Abbel, G. (2011) 'Modeling of primary dendrite arm spacing variations in thin-slab casting of low carbon and low alloy steels'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. IOP Publishing. pp. 012046 - 012046. ISSN: 1757-8981 Open Access Link

Li, HT., Wang, Y. and Fan, Z. (2011) 'Enhanced heterogeneous nucleation on oxides in Al alloys by intensive shearing'. IOP Conference Series: Materials Science and Engineering. ISSN: 1757-8981

Yan, F., McKay, BJ., Fan, Z. and Chen, MF. (2011) 'Preliminary study of the characteristics of a high Mg containing Al-Mg-Si alloy'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. IOP Publishing. pp. 012050 - 012050. ISSN: 1757-8981 Open Access Link

Huang, Y., Bayandorian, I. and Fan, Z. (2011) 'Microstructure control during twin roll casting of an AZ31 magnesium alloy'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. IOP PUBLISHING LTD. ISSN: 1757-8981

Li, HT., Ji, S., Wang, Y., Xia, M. and Fan, Z. (2011) 'Effect of intensive melt shearing on the formation of Fe-containing intermetallics in LM24 Al-alloy'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. IOP Publishing. pp. 012075 - 012075. ISSN: 1757-8981 Open Access Link

Santillana, B., Eskin, DG., Boom, R. and Katgerman, L. (2011) 'Effect of V and N on the microstructure evolution during continuous casting of steel'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. IOP Publishing. pp. 012059 - 012059. ISSN: 1757-8981 Open Access Link

Zhang, Z., Li, H-T., Stone, IC. and Fan, Z. (2011) 'Refinement of primary Si in hypereutectic Al-Si alloys by intensive melt shearing'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. IOP Publishing. pp. 012042 - 012042. ISSN: 1757-8981 Open Access Link

Fan, ZY., Zuo, YB. and Jiang, B. (2011) 'A New Technology for Treating Liquid Metals with Intensive Melt Shearing'. Materials Science Forum, 690. pp. 141 - 144. ISSN: 0255-5476

Zuo, YB., Jiang, B. and Fan, ZY. (2011) 'Microstructures of DC Cast Light Alloys under the Influence of Intensive Melt Shearing'. Materials Science Forum, 690. pp. 137 - 140. ISSN: 0255-5476

Kotadia, HR., Hari Babu, N., Zhang, H., Arumuganathar, S. and Fan, Z. (2011) 'Solidification behavior of intensively sheared hypoeutectic Al-Si alloy liquid'. Metallurgical and Materials Transactions A, Forthcoming (4). pp. 1117 - 1126. ISSN: 1543-1940 Open Access Link

Nowak, M. and Babu, NH. (2011) 'Novel Grain Refiner for Hypo- and Hyper-Eutectic Al-Si Alloys'. Materials Science Forum, 690. pp. 49 - 52. ISSN: 0255-5476

Vlachos, N. and Chang, ITH. (2011) 'Investigation of flow properties of metal powders from narrow particle size distribution to polydisperse mixtures through an improved Hall-flowmeter'. Powder Technology, 205 (1-3). pp. 71 - 80. ISSN: 0032-5910

Laurent, P., Fagnard, J-F., Babu, NH., Cardwell, DA., Vanderheyden, B. and Vanderbemden, P. (2010) 'Self-heating of bulk high temperature superconductors of finite height subjected to a large alternating magnetic field'. Superconductor Science and Technology, 23 (12). pp. 124004 - 124004. ISSN: 0953-2048

Meluch, L. and Chang, ITH. (2010) 'Study of warm compaction of Alumix 123 L'. Powder Metallurgy, 53 (4). pp. 323 - 327. ISSN: 0032-5899

Men, H., Jiang, B. and Fan, Z. (2010) 'Mechanisms of grain refinement by intensive shearing of AZ91 alloy melt'. Acta Materialia, 58 (19). pp. 6526 - 6534. ISSN: 1359-6454 Open Access Link

Stone, I. (2010) 'Casting is considered'. Materials World, 18 (11). pp. 27 - 28. ISSN: 0967-8638

Zarif, M., McKay, BJ., Li, J. and Schumacher, P. (2010) 'Study of the Effect of Strontium (Sr) on the Nucleation of Eutectic Silicon (Si) in High Purity Hypoeutectic Al-5Si Alloys'. BHM BERG- UND HÜTTENMÄNNISCHE MONATSHEFTE, 155 (11). pp. 506 - 511. ISSN: 0005-8912

Scamans, G. (2010) 'Showing mettle'. Materials World, 18 (11). pp. 22 - 24. ISSN: 0967-8638

McMurray, HN., Holder, A., Williams, G., Scamans, GM. and Coleman, AJ. (2010) 'The kinetics and mechanisms of filiform corrosion on aluminium alloy AA6111'. Electrochimica Acta, 55 (27). pp. 7843 - 7852. ISSN: 0013-4686

Xu, J., Liu, G., Zhang, S., Shi, L. and Fan, Z. (2010) 'Rheo‐diecasting of AZ91D magnesium alloy'. Rare Metals, 29 (5). pp. 542 - 546. ISSN: 1001-0521

Hono, K., Mendis, CL., Sasaki, TT. and Oh-ishi, K. (2010) 'Towards the development of heat-treatable high-strength wrought Mg alloys'. Scripta Materialia, 63 (7). pp. 710 - 715. ISSN: 1359-6462

Jayaraj, J., Mendis, CL., Ohkubo, T., Oh-ishi, K. and Hono, K. (2010) 'Enhanced precipitation hardening of Mg–Ca alloy by Al addition'. Scripta Materialia, 63 (8). pp. 831 - 834. ISSN: 1359-6462

Pathak, SK., Babu, NH., Dennis, AR., Iida, K., Strasik, M. and Cardwell, DA. (2010) 'Recycling of multi-grain, melt processed bulk (RE)BCO superconductors'. Superconductor Science and Technology, 23 (10). pp. 109801 - 109801. ISSN: 0953-2048

Lalpoor, M., Eskin, DG. and Katgerman, L. (2010) 'Cold Cracking Development in AA7050 Direct Chill–Cast Billets under Various Casting Conditions'. Metallurgical and Materials Transactions A, 41 (9). pp. 2425 - 2434. ISSN: 1073-5623

Huang, Y., Robson, JD. and Prangnell, PB. (2010) 'Room temperature instability of an Al-4%Cu super saturated solid solution in a nano-crystalline alloy produced by SPD'. Journal of Materials Science, 45 (17). pp. 4851 - 4857. ISSN: 0022-2461

Basak, CB., Prabhu, N. and Krishnan, M. (2010) 'On the formation mechanism of UZr2 phase'. Intermetallics, 18 (9). pp. 1707 - 1712. ISSN: 0966-9795

Hou, LG., Cui, C. and Zhang, JS. (2010) 'Optimizing microstructures of hypereutectic Al–Si alloys with high Fe content via spray forming technique'. Materials Science and Engineering: A, 527 (23). pp. 6400 - 6412. ISSN: 0921-5093

Saeid, T., Abdollah-zadeh, A., Shibayanagi, T., Ikeuchi, K. and Assadi, H. (2010) 'On the formation of grain structure during friction stir welding of duplex stainless steel'. Materials Science and Engineering: A, 527 (24-25). pp. 6484 - 6488. ISSN: 0921-5093

ZHU, G-L., XU, J., ZHANG, Z-F., LIU, G-J. and Fan, Z. (2010) 'Effect of high shear rate on solidification microstructure of semisolid AZ91D alloy'. Transactions of Nonferrous Metals Society of China, 20 (SUPPL. 3). pp. s868 - s872. ISSN: 1003-6326

Lalpoor, M., Eskin, DG. and Katgerman, L. (2010) 'Cold cracking development in AA7050 direct chill-cast billets under various casting conditions'. Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 41 (9). pp. 2425 - 2434. ISSN: 1073-5623

Shi, Y., Hari Babu, N., Iida, K., Yeoh, WK., Dennis, AR., Pathak, SK. and Cardwell, DA. et al. (2010) 'Batch-processed GdBCO–Ag bulk superconductors fabricated using generic seeds with high trapped fields'. Physica C: Superconductivity and its Applications, 470 (17-18). pp. 685 - 688. ISSN: 0921-4534

Barekar, NS., Pauly, S., Kumar, RB., Kuhn, U., Dhindaw, BK. and Eckert, J. (2010) ' Structure-property Relations in Bulk Metallic Cu-Zr-Al Alloys'. Materials Science & Engineering A, 527 (21–22). pp. 5867 - 5872. ISSN: 0921-5093

Lalpoor, M., Eskin, DG., Fjær, HG., Cate, AT., Ontijt, N. and Katgerman, L. (2010) 'Application of a criterion for cold cracking to casting high strength aluminium alloys'.7th Pacific Rim International Conference on Advanced Materials and Processing. Cairns, AUSTRALIA. 2 - 6 August. Trans Tech Publications, Ltd.. pp. 1432 - 1435. ISSN: 0255-5476

Garcia-Escorial, A., Echevarria, M., Lieblich, M. and Stone, I. (2010) 'Characterisation of an Al9₃Fe₃Cr₂Ti₂ alloy obtained by spray forming'. Journal of Alloys and Compounds, 504 (1). pp. 519 - 521. ISSN: 0925-8388

Wang, Y., Xia, M., Fan, Z., Zhou, X. and Thompson, GE. (2010) 'The effect of Al8Mn₅ intermetallic particles on grain size of as-cast Mg-Al-Zn AZ91D alloy'. Intermetallics, 18 (8). pp. 1683 - 1689. ISSN: 0966-9795

Barekar, NS., Babu, NH., Dhindaw, BK. and Fan, Z. (2010) 'Effect of intensive shearing on morphology of primary silicon and properties of hypereutectic Al-Si alloy'. Materials Science and Technology, 26 (8). pp. 975 - 980. ISSN: 0267-0836

Barekar, NS., Dhindaw, BK. and Fan, Z. (2010) 'Improvement in silicon morphology and mechanical properties of Al-17Si alloy by melt conditioning shear technology'. International Journal of Cast Metals Research, 23 (4). pp. 225 - 230. ISSN: 1364-0461