Holroyd, H., Burnett, T. and Scamans, G. (2023) 'Environment-Induced Crack Initiation and Early Stages of Crack Growth in Aluminum Alloys, Part 2'. Corrosion, 79 (8). pp. 817 - 817. ISSN: 0010-9312 Open Access Link

Fang, CM. and Biswas, K. (2023) 'Preferential Eu Site Occupation and Its Consequences in the Ternary Luminescent Halides AB 2 I 5 ∶Eu 2+ (A = Li–Cs; B = Sr, Ba)'. Physical Review Applied, 4 (1). pp. 1 - 8. ISSN: 2331-7019 Open Access Link

Wang, J., Gao, J., Yang, H., Yang, F., Wen, T., Liu, Z., Zhang, L. and Ji, S. et al. (2023) 'High-strength Al–5Mg2Si–2Mg–2Fe alloy with extremely high Fe content for green industrial application through additive manufacturing'. Virtual and Physical Prototyping, 18 (1). pp. 1 - 15. ISSN: 1745-2759 Open Access Link

Yang, X., Gibbons, GJ., Tanner, DA., Li, Z., Wilson, P., Williams, MA. and Kotadia, HR. et al. (2023) 'Scan strategy induced microstructure and consolidation variation in the laser-powder bed fusion (L-PBF) additive manufacturing of low alloy 20MnCr5 steel'. Materials and Design, 232. pp. 1 - 15. ISSN: 0264-1275 Open Access Link

Wang, S., Wang, Y., Ramasse, QM., Schmid-Fetzer, R. and Fan, Z. (2023) 'Segregation of Yttrium at the Mg/MgO interface in an Mg-0.5Y Alloy'. Acta Materialia, 257. pp. 1 - 16. ISSN: 1359-6454 Open Access Link

Henry Holroyd, NJ., Burnett, TL., Lewandowski, JJ. and Scamans, GM. (2023) 'Environment-Induced Crack Initiation in Aluminum Alloys: Experimental Studies Since the 1950s and Future Opportunities'. Corrosion, 79 (8). pp. 850 - 867. ISSN: 0010-9312

Karakurt, EM., Cetin, Y., Incesu, A., Demirtas, H., Kaya, M., Yildizhan, Y., Tosun, M. and Huang, Y. et al. (2023) 'Microstructural, Biomechanical, and In Vitro Studies of Ti-Nb-Zr Alloys Fabricated by Powder Metallurgy'. Materials, 16 (12). pp. 1 - 18. ISSN: 1996-1944 Open Access Link

Eskin, D. (2023) 'For Georgy I. Eskin – On the occasion of his 90th birthday'. Ultrasonics Sonochemistry, 98. pp. 1 - 2. ISSN: 1350-4177 Open Access Link

Li, ZD., Zhang, WW., Li, GT., Li, SS., Ding, HS., Zhang, T. and Song, YJ. et al. (2023) 'Magnetic field annealing of FeCo-based amorphous alloys to enhance thermal stability and Curie temperature'. Rare Metals, 42 (6). pp. 2000 - 2006. ISSN: 1001-0521

Franconi, A., Ceschin, F., Terzioglu, N., Corsini, L. and Ghoreishi, M. (2023) 'Defining alternative recovery strategies for reuse: An analysis of multiple case studies under the reuse umbrella'.5th PLATE Conference (PLATE 2023). Espoo, Finland. 31 - 2 June. Proceedings 5th PLATE Conference. pp. 324 - 331. ISSN: 1799-4853 Open Access Link

Bradley, CG., TerziogluTerzioglu, N., Franconi, A., Wilson, GT., Clark, N., Greenwood, SC., Fleet, K., Salvia, G., Ceschin, F., Iacovidou, E. and Corsini, L. et al. (2023) 'Towards a shared design research agenda for reusable packaging systems'.5th PLATE Conference (PLATE 2023). Espoo, Finland. 31 - 2 June. Proceedings 5th PLATE Conference. pp. 125 - 138. ISSN: 1799-4853 Open Access Link

Konteh, T., Ceschin, F., Harrison, D., Franconi, A. and Minton, T. (2023) 'Circular Product Design Strategies, Principles, and Guidelines for the Metal Sector'.5th PLATE Conference (PLATE 2023). Espoo, Finland. 31 - 2 June. Proceedings 5th PLATE Conference. pp. 524 - 531. ISSN: 1799-4853 Open Access Link

Franconi, A., Ceschin, F., Godsell, J., Harrison, D., Mate, O-A. and Konteh, T. (2023) 'Co-creating sociotechnical visions for a circular metal economy transition in the UK'.Product Lifetimes and the Environment (PLATE). Espoo, Finland. 31 - 2 June. Proceedings of the 5th PLATE Conference. pp. 1 - 9.Open Access Link

Wiese, B., Celikin, M. and Mendis, CL. (2023) 'Relationships between Processing and Properties of Magnesium-Based Alloys'. Crystals, 13 (6). pp. 1 - 4.Open Access Link

Cai, Q., Zhou, M., Bagherpour, E., Hosseini, S., Mendis, C., Chang, I. and Assadi, H. et al. (2023) 'New Insight Into Crack-Healing Mechanism via Electropulsing Treatment'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 54 (7). pp. 2960 - 2974. ISSN: 1073-5623 Open Access Link

Karakurt, EM., Huang, Y., Kaya, M., Demirtas, H., Acikgoz, A. and Demircan, G. (2023) 'Effect of Relative Density on Microstructure, Corrosion Resistance and Mechanical Performance of Porous Ti–20Zr Alloys Fabricated by Powder Metallurgy'. Arabian Journal for Science and Engineering, 49 (2). pp. 1479 - 1489. ISSN: 2193-567X

Karim, M., Liu, G., Eskin, D. and McKay, B. (2023) 'High Pressure Die Cast nAlN reinforced AZ91 Magnesium Alloy'.LightMe - First International Conference on Lightweight Materials. Milan.Open Access Link

Sadeghi, F., Zargar, T., Kim, SH., Heo, Y-U., Lee, JS. and Yim, CH. (2023) 'Evolution of centerline carbides in a martensitic stainless steel slab during reheating treatment'. Materials Characterization, 201. pp. 1 - 17. ISSN: 1044-5803

Fang, C. and Fan, Z. (2023) 'Atomic Ordering and Interfacial Interaction at Liquid-Mg/SiC{0 0 0 1} Interfaces: An Ab Initio Molecular Dynamics Study'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 54 (7). pp. 2819 - 2826. ISSN: 1073-5623 Open Access Link

Eskin, DG. and Tzanakis, I. (2023) 'Applications to solidification and casting of metals', in Gallego-Juárez, JA., Graff, KF. and Lucas, M. (eds.) Power Ultrasonics: Applications of High-Intensity Ultrasound, Second Edition. Cambridge : Woodhead Publishing. pp. 489 - 507. ISBN 10: 0-12-820254-8. ISBN 13: 978-0-323-85144-2.

Eskin, DG. (2023) 'Ultrasonic degassing of liquids', in Gallego-Juárez, JA., Graff, KF. and Lucas, M. (eds.) Power Ultrasonics: Applications of High-Intensity Ultrasound, Second Edition. Cambridge : Woodhead Publishing. pp. 473 - 487. ISBN 10: 0-12-820254-8. ISBN 13: 978-0-323-85144-2.

Ghorbani, HR., Kermanpur, A., Rezaeian, A., Sadeghi, F. and Siahboumi, AA. (2023) 'Solidification behavior and microstructural features of the cast and HIPed N-bearing Ti–48Al–2Cr–2Nb intermetallic alloys'. Journal of Materials Research and Technology, 24. pp. 5215 - 5234. ISSN: 2238-7854 Open Access Link

Yang, F., wang, J., Wen, T., Ai, X., Yang, H. and ji, S. (Accepted) 'A High Strength Near-Eutectic Al-Mg-Si Alloy with Nanoscale Cellular Structures Fabricated by Laser Powder Bed Fusion'. SSRN Electronic Journal.

Joshi, SS., Keller, C., Mas, L., Lefebvre, W., Hug, E. and Couzinie, J-P. (2023) 'On the origin of the strain hardening mechanisms of Ni20Cr alloy manufactured by laser powder bed fusion'. International Journal of Plasticity, 165. pp. 1 - 24. ISSN: 0749-6419 Open Access Link

Fang, C. and Fan, Z. (2023) 'Segregation of Alkaline Earth Atoms Affects Prenucleation at L-Al/γ-Alumina Interfaces'. Metals, 13 (4). pp. 1 - 12.Open Access Link

Yang, F., Wang, J., Wen, T., Huang, S., Liu, Z., Ji, S. and Yang, H. et al. (2023) 'Laser powder bed fusion of a novel high strength Al-Mg alloy via Si and Zn microalloying'. Materials Letters, 343. pp. 1 - 4. ISSN: 0167-577X

Wang, H., Qi, H., Sun, X., Jia, S., Li, X., Miao, TJ., Xiong, L., Wang, S., Zhang, X., Liu, X., Wang, A., Zhang, T., Huang, W. and Tang, J. et al. (2023) 'High quantum efficiency of hydrogen production from methanol aqueous solution with PtCu–TiO2 photocatalysts'. Nature Materials, 22 (5). pp. 619 - 626. ISSN: 1476-1122

Feng, L., Dong, X., Cai, Q., Wang, B. and ji, S. (Accepted) 'Effect of Gd on the Microstructure and Mechanical Properties of High-Pressure Die-Cast Mg-La-Ce Alloys at Ambient and Elevated Temperatures'. SSRN Electronic Journal.

Yang, F., wang, J., Wen, T., Zhang, L., Dong, X., Qiu, D., Yang, H. and ji, S. et al. (Accepted) 'Developing a Novel High-Strength Al-Mg-Zn-Si Alloy for Laser Powder Bed Fusion'. SSRN Electronic Journal.

Chankitmunkong, S., Eskin, DG., Limmaneevichitr, C. and Pandee, P. (2023) 'Synergetic grain refinement and ZrB2 hardening in in-situ ZrB2/AA4032-type composites by ultrasonic assisted melt treatment'. Journal of Materials Research and Technology, 24. pp. 2879 - 2890. ISSN: 2238-7854 Open Access Link

Cai, Q., Lordan, E., Wang, S., Liu, G., Mendis, CL., Chang, ITH. and Ji, S. et al. (2023) 'Die-cast multicomponent near-eutectic and hypoeutectic Al–Si–Ni–Fe–Mn alloys: Microstructures and mechanical properties'. Materials Science and Engineering A, 872. pp. 1 - 14. ISSN: 0921-5093 Open Access Link

Lei, F., Wen, T., yang, F., wang, J., Yang, H., Fu, J., Wang, J. and ji, S. et al. (Accepted) 'Microstructures and Mechanical Properties of H13 Tool Steel Processed by Selective Laser Melting'. SSRN Electronic Journal.

wang, J., Zou, J., Yang, H., liu, Z. and ji, S. (Accepted) 'High Strength and Ductility of an Additively Manufactured Crconi Medium-Entropy Alloy Achieved by Minor Mo Doping'. SSRN Electronic Journal.

Yang, F., Wang, J., Wen, T., Ai, X., Dong, X., Yang, H. and Ji, S. et al. (2023) 'Microstructure and mechanical properties of pseudo binary eutectic Al–Mg2Si alloy processed by laser powder bed fusion'. Journal of Materials Research and Technology, 24. pp. 2187 - 2199. ISSN: 2238-7854 Open Access Link

Chankitmunkong, S., Eskin, DG., Limmaneevichitr, C., Pandee, P. and Diewwanit, O. (2023) 'Effect of Zr and Sc on Intermetallic Morphology and Hardening of an Al–Fe Alloy'.TMS Annual Meeting & Exhibition (TMS 2023): The Light Metals symposia. San Diego, CA, USA. 19 - 23 March. Springer Nature Switzerland. pp. 1252 - 1256. ISSN: 2367-1181

Eskin, D., Komarov, S. and Tzanakis, I. (2023) 'Sonoprocessing of materials (Special issue)'. Ultrasonics Sonochemistry, 96. pp. 1 - 1. ISSN: 1350-4177 Open Access Link

Gao, X., Jiang, W., Lu, Y., Ding, Z., Liu, J., Liu, W., Sha, G., Wang, T., Li, T., Chang, ITH. and Zhao, Y. et al. (2023) 'Excellent strength-ductility combination of Cr26Mn20Fe20Co20Ni14 high-entropy alloy at cryogenic temperatures'. Journal of Materials Science and Technology, 154. pp. 166 - 177. ISSN: 1005-0302

Lebon, B. (2023) 'directChillFoam: an OpenFOAM application for direct-chill casting'. Journal of Open Source Software, 8 (82). pp. 1 - 4.Open Access Link

Khavari, M., Priyadarshi, A., Morton, J., Porfyrakis, K., Pericleous, K., Eskin, D. and Tzanakis, I. et al. (2023) 'Cavitation-induced shock wave behaviour in different liquids'. Ultrasonics Sonochemistry, 94. pp. 1 - 14. ISSN: 1350-4177 Open Access Link

Abu Amara, A., Liu, G., Eskin, D. and McKay, B. (2023) 'Stability of SiC and Al2O3 Reinforcement Particles in Thermomechanical Processed Direct Chill Cast Al MMnCs'.TMS Annual Meeting 2023. San Diego, CA, USA. 9 - 23 March. Springer Nature Switzerland. pp. 1005 - 1014. ISSN: 2367-1181

Courtenay, J. and Wang, Y. (2023) 'Recent Studies Using HR-TEM on the Fundamental Mechanism of Nucleation of a-Aluminum on TiB2 in TiB D High-Efficiency Grain Refiners'.Light Metals 2023 Symposia (TMS 2023 Annual Meeting & Exhibition). San Diego, CA, USA. 9 - 21 March. Springer Nature Switzerland. pp. 967 - 973. ISSN: 2367-1181

Dong, X., Feng, L., Nyberg, EA. and Ji, S. (2023) 'The Mechanisms to Improve Creep Resistance in a Die-Cast MgREMnAl Alloy'.TMS Annual Meeting & Exhibition. San Diego, CA, USA. 6 - 23 March. Springer Nature Switzerland. pp. 143 - 150. ISSN: 2367-1181

Tyurnina, AV., Morton, JA., Kaur, A., Mi, J., Grobert, N., Porfyrakis, K., Tzanakis, I. and Eskin, DG. et al. (2023) 'Effects of green solvents and surfactants on the characteristics of few-layer graphene produced by dual-frequency ultrasonic liquid phase exfoliation technique'. Carbon, 206. pp. 7 - 15. ISSN: 0008-6223 Open Access Link

Kangazian, J., Kermanpur, A., Shamanian, M., Sadeghi, F., Badrossamay, M. and Foroozmehr, E. (2023) 'Microstructure and hot tensile behavior of Hastelloy X superalloy laser powder-bed fusion-fabricated through different scanning patterns'. Materials Science and Engineering: A, 867. pp. 1 - 17. ISSN: 0921-5093

Huang, Y. and Jiang, J. (2023) 'A Critical Review of von Mises Criterion for Compatible Deformation of Polycrystalline Materials'. Crystals, 13 (2). pp. 1 - 17.Open Access Link

Shurkin, P., Scamans, G., Barekar, N., Hou, L., Subroto, T. and Barbatti, C. (2023) 'Phase Composition and Microstructure of High Strength AA6xxx Aluminium Alloys with Nickel Additions'. Materials Transactions, 64 (2). pp. 398 - 405. ISSN: 1345-9678 Open Access Link

Cai, Q., Fang, C., Mendis, C., Chang, ITH. and Cantor, B. (2023) 'Thermal behaviour and microstructure evolution of new ternary eutectic alloy in Al-Cu-Si-Ni system'. Journal of Alloys and Compounds, 941. pp. 1 - 14. ISSN: 0925-8388 Open Access Link

Ng, KL., Maciejewska, BM., Qin, L., Johnston, C., Barrio, J., Titirici, MM., Tzanakis, I., Eskin, DG., Porfyrakis, K., Mi, J. and Grobert, N. et al. (2023) 'Direct Evidence of the Exfoliation Efficiency and Graphene Dispersibility of Green Solvents toward Sustainable Graphene Production'. ACS Sustainable Chemistry and Engineering, 11 (1). pp. 58 - 66. ISSN: 2168-0485 Open Access Link

Morton, JA., Kaur, A., Khavari, M., Tyurnina, AV., Priyadarshi, A., Eskin, DG., Mi, J., Porfyrakis, K., Prentice, P. and Tzanakis, I. et al. (2023) 'An eco-friendly solution for liquid phase exfoliation of graphite under optimised ultrasonication conditions'. Carbon, 204. pp. 434 - 446. ISSN: 0008-6223 Open Access Link

Morton, J., Khavari, M., Priyadarshi, A., Kaur, A., Grobert, N., Mi, J., Porfyrakis, K., Prentice, P., Eskin, D. and Tzanakis, I. et al. (2023) 'Dual frequency ultrasonic cavitation in various liquids: High-speed imaging and acoustic pressure measurements'. Physics of Fluids, 35 (1). pp. 1 - 13. ISSN: 1070-6631 Open Access Link

Priyadarshi, A., Subroto, T., Nohava, J., Pavel, S., Conte, M., Pericleous, K., Eskin, D. and Tzanakis, I. et al. (2023) 'Investigation of mechanical properties of Al3Zr intermetallics at room and elevated temperatures using nanoindentation'. Intermetallics, 154. pp. 1 - 9. ISSN: 0966-9795 Open Access Link