BCAST
View our websiteLi, J., Wang, J., Wang, A., Zhu, M., Wen, T., Ji, S. and et al. (2026) 'Achieving the improvement of isotropic strength in the additively manufactured Al-Mg-Si-Zn-Cu-Ti alloy via heterogeneous nucleation and eutectic solidification'. Materials Science and Engineering: A, 959. pp. 149994 - 149994. ISSN: 0921-5093
Wang, J., Zhu, M., Wang, J., Wen, T., Dong, X., Wang, Y., et al. (2026) 'Designing melt pool microstructures for synergistic strengthening of laser powder bed fused heat-resistant Al-Si alloy'. Journal of Alloys and Compounds, 1060. pp. 1 - 15. ISSN: 0925-8388
Fang, PX., Nihtianov, S. and Fang, C. (2026) 'Construction of Atomically Thin Boron Films on Si Heterojunctions Using a First Principles Approach'. Materials, 19 (5). pp. 1 - 14.Open Access Link
Fang, C. (2026) 'Multi-Scale Simulation of Metallic Materials (2nd Edition)'. Metals, 16 (3). pp. 1 - 5.Open Access Link
Wang, H., Xu, Q., Li, M., Ren, N., Li, J., Li, J., et al. (2026) 'Nucleation energy barrier and undercooling constraints: Orientation tune of Zn crystals at varying substrate temperatures'. Journal of Alloys and Compounds, 1059. pp. 1 - 13. ISSN: 0925-8388
Niu, Z., Zhou, X., Hou, P., Liu, M., Liang, S., Sun, Y., et al. (2026) 'Nano CaCO₃ seeding for improving properties of limestone calcined clay cement through in-situ carbonation'. Cement and Concrete Composites, 0 (in press, pre-proof). pp. 1 - 29. ISSN: 0958-9465 Open Access Link
Gunasekaran, SS., Bagherpour, E., Tzileroglou, C., Mendis, C. and Barbatti, C. (2026) 'Thermo-mechanical simulation of microstructure and texture evolution in flat-strip extrusion of Al–Mg–Si-Cu alloy'. Materials and Design, 264. pp. 1 - 10. ISSN: 0264-1275 Open Access Link
Yang, X., Hari Babu, N. and Fang, C. (2026) 'Ultrahigh strength magnesium via solidification of nanocolloid'. Nature Communications, 0 (in submission). pp. 1 - 28.Open Access Link
Lian, H., Shi, ZM., Yu, W., Zhao, G., Wang, Y. and Pang, N. (2026) 'Study on Formation Process of Spinel (MgAl2O4) Particles Through In Situ Reactions of Fe2O3 Powder in Al–Mg Melts'. Metallography, Microstructure, and Analysis, 0 (ahead of print). pp. 1 - 13. ISSN: 2192-9262
Nassar, A., Al-Sairfi, H., Cochrane, R., Abul, MR., Teggin, L., Al-Jenabi, O., et al. (2026) 'Achieving Single Solid Solution in Equimolar AlCrCuFeNi via Rapid Solidification'. Materials Today Communications, 51. pp. 1 - 11. ISSN: 2352-4928 Open Access Link
Eskin, DG., Tzanakis, I., Pericleous, K. and Mi, J. (2026) 'Advanced techniques to reveal the underlying physics of ultrasonic processing'. Ultrasonics Sonochemistry, 127. pp. 1 - 2. ISSN: 1350-4177 Open Access Link
Guo, D., Zhu, C., Chapman, HE., Zhang, K., Li, W., Bhagavath, S., et al. (2026) 'Mechanical and in situ thermal-related behavior during directed energy deposition additive manufacturing of a high-performance Al alloy'. International Journal of Extreme Manufacturing, 8 (3). pp. 1 - 15. ISSN: 2631-8644 Open Access Link
Liu, M., Niu, Z., Zhou, X., Hou, P., Hai, R., Liang, S. and et al. (2026) 'Synergistic effects of triethanolamine and nano-SiO₂ on the hydration and hardening properties of Limestone calcined clay cement'. Cement and Concrete Composites, 168. pp. 1 - 13. ISSN: 0958-9465 Open Access Link
Que, Z., Negrea, RF. and Fan, Z. (2026) 'Nanoscale Fe-Containing Intermetallic Formation in Al-Fe-Mn-Si Alloys: Unveiling a Rare Explosive Nucleation Pathway under Liquid Confinement'. Materials Today Communications, 0 (in press, pre-proof). pp. 1 - 24. ISSN: 2352-4928 Open Access Link
Lian, H., Shi, ZM., Yu, W., Wang, Y., Wang, W. and Pang, N. (2026) 'Improvement of microstructure and mechanical property of Al–2Fe alloy though an in-situ reaction of Fe2O3 powder in Al–Mg melts'. Journal of Materials Research and Technology, 41. pp. 1630 - 1643. ISSN: 2238-7854 Open Access Link
Zhang, H., Zai, L., Wang, Y. and Xue, X. (2026) 'Achieving columnar-to-equiaxed transition in TIG-welded Ti2AlNb intermetallic alloy via nano-ZrO₂ particles'. Materials Characterization, 232. pp. 1 - 12. ISSN: 1044-5803
Que, Z. and Fan, Z. (2026) 'Nucleation control strategy for sustainable aluminium: Improving Fe removal efficiency or increasing Fe-tolerance'. Journal of Materials Research and Technology, 40. pp. 2820 - 2832. ISSN: 2238-7854 Open Access Link
Zhang, H., Zai, L., Wang, Y. and Xue, X. (2026) 'Unveiling the hot cracking mechanism in Ti2AlNb-based alloys during fusion welding'. Materials Letters, 403. pp. 139400 - 139400. ISSN: 0167-577X
Liu, Q., Zhang, G., Ni, D., Dong, X., Zhang, C., Li, S., et al. (2026) 'Effects of Cu content and natural ageing on microstructure and mechanical properties of Tesla-based Al7Si0.3Mg0.3Fe heat treatment-free die-cast alloys'. Journal of Alloys and Compounds, 1052. pp. 186172 - 186172. ISSN: 0925-8388
Wang, A., Yang, Z., Zhu, M., Wen, T., Wang, J., Dong, X., et al. (2025) 'An additively manufactured heat-resistant L12-hardened CoCrNi-based medium-entropy composite achieved by a thermal stable cellular-nanoparticle architectural structure'. Journal of Alloys and Compounds, 1051 (25 January 2026). pp. 1 - 13. ISSN: 0925-8388
Ang, HQ., Kumar, G. and Karakulak, E. (2025) 'Development of Light Alloys and Their Applications'. Crystals, 16 (1). pp. 1 - 4.
Xiang, K., Qin, L., Huang, S., Song, H., Bazhenov, V., Bellucci, V., et al. (2025) 'Ultrasonic cavitation shock wave exfoliation dynamics of 2D materials revealed in situ by MHz XFEL imaging and multiphysics modeling'. Science Advances, 11 (48). pp. 1 - 10. ISSN: 2375-2548 Open Access Link
Rao, B., Wang, Z., Rao, W., Que, Z., Li, F., Wang, J. and et al. (2025) 'Seismic Performance of T-Shaped Aluminum Alloy Beam–Column Bolted Connections: Parametric Analysis and Design Implications Based on a Mixed Hardening Model'. Buildings, 15 (23). pp. 1 - 24.Open Access Link
Zhu, M., Wang, J., Wen, T., Qiu, D., Liu, Z., Ji, S., et al. (2025) 'Strength-ductility synergy high performance and thermal resistant TiB2/Al-Mg-Yb-Zr alloy prepared by additive manufacturing'. Materials Science and Engineering: A, 950 (January 2026). pp. 1 - 14. ISSN: 0921-5093
Zhu, C., Guo, D., Leung, CLA., Tzanakis, I., Lee, PD. and Eskin, D. (2025) 'Design of hot-tearing resistant and thermally stable aluminium alloys for advanced casting technologies'. Materials and Design, 260. pp. 1 - 11. ISSN: 0264-1275 Open Access Link
Esmati, R., Hosseini, SA., Salehi, RH., Hosseini, S. and Alishahi, M. (2025) 'Electrocatalytic water splitting of Ni–Mo/CNT nanocomposite coating developed by ultrasonic-assisted electrodeposition'. International Journal of Hydrogen Energy, 194. pp. 152242 - 152242. ISSN: 0360-3199
Li, N., Wang, Q., Ji, S., Yin, S., Guo, N., Niu, W. and et al. (2025) 'Deformation-driven precipitate evolution in cold sprayed age-hardenable aluminum alloys'. Applied Surface Science, 718 (15 February 2026). pp. 1 - 8. ISSN: 0169-4332 Open Access Link
Wu, H., Song, X., Lu, J., Dou, K., Wang, W., Zhang, Y. and et al. (2025) 'A machine learning method for predicting the elongation to failure of Al–Si alloy in high pressure die casting combining experiment and modeling'. Journal of Materials Research and Technology, 39. pp. 2621 - 2632. ISSN: 2238-7854 Open Access Link
Tian, X., Jiang, F., Xu, C., Shen, C., Dai, Z., Duan, J., et al. (2025) 'Synergistic effects of deep cryogenic treatment and aging on microstructure and mechanical properties of (FeCoNi)86Al7Ti7 high-entropy alloy'. Journal of Materials Science, 60 (40). pp. 19249 - 19266. ISSN: 0022-2461
Alizadeh, A., Souissi, M., Zhou, M. and Assadi, H. (2025) 'Gradient-Based Calibration of a Precipitation Hardening Model for 6xxx Series Aluminium Alloys'. Metals, 15 (9). pp. 1 - 25.Open Access Link
(Accepted) 'Future Star of Metallurgy'. .
Najafi, A., Reihanian, M., Bagherpour, E., Mendis, CL., Mazaheri, Y., Botkin, A., et al. (2025) 'Tailoring microstructure and mechanical behavior of Mg-1Zn-0.2Ca alloy through Hot Extrusion with a Cosine-Profile Die'. Materials Today Communications, 49. pp. 1 - 11. ISSN: 2352-4928
Que, Z., Wang, Y., Fan, Z., Negrea, RF., Zhou, X. and Ramasse, Q. (2025) 'Interfacial Segregation of Fe and Si on TiB2 Surface and Refinement of Fe-Bearing Intermetallic Compounds and Primary Si Part I: Segregation Phenomenon and Formation of Two-Dimensional Compounds (2DCs) at the Al/TiB2 Interface'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 56 (11). pp. 5209 - 5225. ISSN: 1073-5623 Open Access Link
Que, Z., Wang, Y., Fan, Z. and Zhou, X. (2025) 'Interfacial segregation of Fe and Si on TiB2 surface and refinement of Fe-bearing intermetallic compounds and primary Si : Part II Refinement of primary Fe-intermetallic compounds and primary Si through manipulating nucleation potency of TiB2 particles'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 946. pp. 1 - 15. ISSN: 0921-5093 Open Access Link
Lazaro Nebreda, J., Karakulak, E., Shurkin, P. and Scamans, G. (2025) 'Low-Pressure Die Casting of Aluminium Alloy Components for Electric Vehicle Battery Enclosures'. IOP Conference Series: Materials Science and Engineering, 1335 (1). pp. 1 - 8. ISSN: 1757-8981 Open Access Link
Wang, Z., Shang, Y., Lu, K., Chen, Z., Wang, D., Hao, C., et al. (2025) 'A novel fabrication of Al-based high-entropy alloy with ultra-high hardness via usage of recycled aluminum'. Materials Characterization, 228. pp. 1 - 16. ISSN: 1044-5803
Vivekanandam, V., Joshi, SS., Lazaro Nebreda, J. and Fan, Z. (2025) 'Effect of Processing-Induced Oxides on the Fatigue Life Variability of 6082 Al-Mg-Si Alloy Extruded Components'. Journal of Manufacturing and Materials Processing, 9 (7). pp. 1 - 12.Open Access Link
Priyadarshi, A., Kaur, A., Khavari, M., Morton, JA., Tyurnina, AV., Ghorbani, M., et al. (2025) 'Role of shock waves in materials processing: Fundamentals and Applications'. Ultrasonics Sonochemistry, 120. pp. 1 - 27. ISSN: 1350-4177 Open Access Link
Behjat, A., Shamanian, M., Sadeghi, F., Mosallanejad, MH. and Saboori, A. (2025) 'Process-Driven Structural and Property Evolution in Laser Powder Bed Fusion of a Newly Developed AISI 316L Stainless Steel'. Materials, 18 (14). pp. 1 - 22. ISSN: 1996-1944 Open Access Link
Wang, H., Su, L., Bagherpour, E. and Xing, Q. (2025) 'Characterization and Modelling of the Deformation and Failure of Engineering Metallic Materials'. Crystals, 15 (7). pp. 1 - 5.Open Access Link
Tangsuksan, T., Pandee, P., Diewwanit, O., Limmaneevichitr, C., Tyurnina, AV., Eskin, DG. and et al. (2025) 'Enhancing the properties of a hypereutectic Al-Fe alloy through recycled aluminum scrap and ultrasonic melt processing'. Materials Characterization, 228. pp. 1 - 16. ISSN: 1044-5803
Keerti, S., Yang, X. and Hari Babu, N. (2025) 'A generic Hall-Petch relationship in metallic materials with varied grain morphology'. Materials Science and Engineering: A, 943. pp. 1 - 13. ISSN: 0921-5093 Open Access Link
Zhu, M., Wang, J., Wen, T., He, Z., Dong, X., Qiu, D., et al. (2025) 'Processability improvement and strength enhancement in laser powder bed fusion of AlMgZr and AlMgZr-Ti alloys'. Virtual and Physical Prototyping, 20 (1). pp. 1 - 16. ISSN: 1745-2759 Open Access Link
Dai, Z., Shen, C., Wang, Y., Xu, C., Tian, X., Xu, M. and et al. (2025) 'Designing Ti ZrNbMoV refractory high entropy alloys with improved properties by reducing intermetallic compound and dendritic segregation'. Journal of Alloys and Compounds, 1036. pp. 1 - 12. ISSN: 0925-8388
Xu, C., Jiang, F., Tian, X., Dai, Z., Duan, J., Cai, X., et al. (2025) 'Comprehensive investigation of aging treatments on microstructure and mechanical properties of (FeCoNi)86Al7Ti7 high-entropy alloy'. Journal of Alloys and Compounds, 1036. pp. 1 - 15. ISSN: 0925-8388
Fang, C., Que, Z. and Fan, Z. (2025) 'Stability, Chemical Composition, and Structural and Electronic Properties of the Intermetallic Compound τ4-(Al1-xSix)5Fe'. Journal of Alloys and Compounds, 1037. pp. 1 - 9. ISSN: 0925-8388 Open Access Link
Famelton, JR., Williams, CA., Barbatti, C., Bagot, PAJ. and Moody, MP. (2025) 'The role of solute clusters in the nucleation of precipitates in Al–Mg–Si–Cu alloys'. Materialia, 42. pp. 1 - 9. ISSN: 2589-1529 Open Access Link
Qin, L., Xiang, K., Eskin, D., Li, L., Tzanakis, I. and Mi, J. (2025) 'An integrated numerical modelling framework for simulation of the multiphysics in sonoprocessing of materials'. Ultrasonics Sonochemistry, 120. pp. 1 - 11. ISSN: 1350-4177 Open Access Link
Sun, J., Dong, X., Li, S., Yang, H. and Ji, S. (2025) 'Effects of composition and natural ageing on microstructure and mechanical properties of Al-Mg-Si heat treatment-free die-cast alloys assisted with machine learning'. Materials Today Communications, 47. pp. 1 - 17. ISSN: 2352-4928
Sharma, D., Roebuck, B., Joshi, SS., de Oliveira Leo, JR., Sharma, R., Ameen, A., et al. (2025) 'Nature of phase transformations in metastable β-Ti alloy: An in situ study on Ti–5Al–5Mo–5V–3Cr alloy'. Journal of Alloys and Compounds, 1034. pp. 181407 - 181407. ISSN: 0925-8388