Ji, S., Yang, W., Gao, F., Watson, D. and Fan, Z. (2016) 'Effect of iron in Al-Mg-Si-Mn ductile diecast alloy'.Proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2013 Annual Meeting & Exhibition. San Antonio, TX, USA. 1 - 7 March. Springer International Publishing. pp. 317 - 322. ISSN: 2367-1181

Ma, C., Hou, L., Zhang, J. and Zhuang, L. (2016) 'Influence of thickness reduction per pass on strain, microstructures and mechanical properties of 7050 Al alloy sheet processed by asymmetric rolling'. Materials Science and Engineering: A, 650. pp. 454 - 468. ISSN: 0921-5093

Nadella, R., Eskin, D. and Katgerman, L. (2016) 'Effect of Grain Refining on Defect Formation in DC Cast Al-Zn-Mg-Cu Alloy Billet', inEssential Readings in Light Metals. Springer International Publishing. pp. 842 - 847. ISBN 13: 9783319485768.

Eskin, DG., Atamanenko, TV., Zhang, L. and Katgerman, L. (2016) 'On the Mechanism of Grain Refinement by Ultrasonic Melt Treatment in the Presence of Transition Metals', inEssential Readings in Light Metals. Springer International Publishing. pp. 415 - 419. ISBN 13: 9783319485768.

Eskin, DG., Lalpoor, M. and Katgerman, L. (2016) 'Cold Cracking During Direct-Chill Casting', inEssential Readings in Light Metals. Springer International Publishing. pp. 939 - 944. ISBN 13: 9783319485768.

Grandfield, JF. and Eskin, DG. (2016) 'Essential Readings in Light Metals'. Springer International Publishing. ISSN 13: 9783319485768

Klösch, G., McKay, BJ. and Schumacher, P. (2016) 'Preliminary Investigation on the Grain Refinement Behavior of ZrB2 Particles in Mg-Al Alloys', inEssential Readings in Magnesium Technology. Springer International Publishing. pp. 255 - 261. ISBN 13: 9783319485881.

Li, W-F., Fang, C. and van Huis, MA. (2016) 'Strong spin-orbit splitting and magnetism of point defect states in monolayerWS2'. Physical Review B, 94 (19). ISSN: 2469-9950

Sharma, K., Basak, CB., Deo, MN., Goswami, M. and Krishnan, M. (2016) 'The effect of ZnO addition on thermo-physical and structural properties of 45S5 bioactive glass/glass-microspheres'.DAE SOLID STATE PHYSICS SYMPOSIUM 2015. Author(s). pp. 070012 - 070012. ISSN: 0094-243X

Cernea, M., Florentina Negrea, R., Veronica Ciuchi, I., Baldisserri, C., Trusca, R. and Galassi, C. (2016) 'Dielectric characterization of Ba x Sr 1−x Fe 12 O 19 ( x =0.05−0.35) ceramics'. Ceramics International, 42 (1). pp. 1050 - 1056. ISSN: 0272-8842

Zhou, M., Jiang, L., Wang, Y., Chen, S. and Usmani, A. (2016) 'CASE STUDY OF RESIDUAL FIRE RESISTANTCE OF MULTISTORY STEEL FRAMES FOLLOWING MODERATE EARTHQUAKES'. STEEL AND ALUMINIUM STRUCTURES.

Shi, JT., Hou, LG., Ma, CQ., Zuo, JR., Cui, H., Zhuang, LZ. and Zhang, JS. et al. (2016) 'Mechanical Properties and Microstructures of 5052 Al Alloy Processed by Asymmetric Cryorolling'. Materials Science Forum, 850. pp. 823 - 828. ISSN: 0255-5476

Zhou, X-L., Zhu, X-Z., Gao, T., Wu, Y-Y. and Liu, X-F. (2016) 'Evolution of a novel Si-18Mn-16Ti-11P alloy in Al-Si melt and its influence on microstructure and properties of high-Si Al-Si alloy'. Results in Physics, 6. pp. 737 - 745. ISSN: 2211-3797

Szakács, G., Mendis, CL., Tolnai, D., Stark, A., Schell, N., Ovri, H., Wolff, M., Kainer, KU., Gröbner, J., Schmid-Fetzer, R. and Hort, N. et al. (2016) 'In Situ Synchrotron Radiation Diffraction during Solidification of Mg15Gd: Effect of Cooling Rate', inMagnesium Technology 2015. pp. 79 - 84.

Li, Z., Limodin, N., Tandjaoui, A., Quaegebeur, P., Witz, J-F. and Balloy, D. (2016) 'Damage investigation in A319 aluminum alloy by digital image correlation during in-situ tensile tests'. Procedia Structural Integrity, 2. pp. 3415 - 3422. ISSN: 2452-3216

Schmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, CL., Tolnai, D., Kainer, KU. and Hort, N. et al. (2016) 'Thermodynamic Description of Reactions between Mg and CaO', inMagnesium Technology 2016. Springer International Publishing. pp. 67 - 72. ISBN 13: 9783319486208.

D’Elia, F., Tolnai, D., Mendis, CL. and Hort, N. (2016) 'Hot Tearing Susceptibility of Mg-5Nd-xZn Alloys', inMagnesium Technology 2016. Springer International Publishing. pp. 129 - 134. ISBN 13: 9783319486208.

Ji, S., Yang, H., Watson, D. and Fan, Z. (2016) 'Weibull analysis for the repeatibility of die castings made by an Al-Mg-Si-Mn ALLOY'.Symposium on Light Metals held during 145th The-Minerals-Metals-and-Materials-Society Annual Meeting and Exhibition. Nashville, TN. 1 - 18 February. JOHN WILEY & SONS INC. pp. 681 - 685. ISSN: 0147-0809

Wang, Y., Zhou, L. and Fan, Z. (2016) 'Mechanism of zirconium poisioning effect on TiB2 inoculation in aluminium alloys'. TMS Light Metals. pp. 725 - 729. ISSN: 0147-0809

Kawther, AH., Stone, I. and Fan, Z. (2016) 'Refinement of primary silicon crystals by novel Al-ZnS Master alloy in solidification of hypereutectic Al-Si Alloys'. TMS Light Metals. pp. 271 - 273. ISSN: 0147-0809

Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2016) 'Texture Changes during Simple Shear Extrusion (SSE) Processing of Pure Copper'. MATERIALS TRANSACTIONS, 57 (9). pp. 1386 - 1391. ISSN: 1345-9678

Assadi, H., Gaertner, F. and Klassen, T. (2016) 'Modeling and Simulation of Cold Spray', in Kay, CM. and Karthikeyan, J. (eds.) High Pressure Cold Spray Principles and Applications. pp. 67 - 106. ISBN 10: 162708097X.

Klassen, T., Gaertner, F. and Assadi, H. (2016) 'Process Science of Cold Spray', in Kay, CM. and Karthikeyan, J. (eds.) High Pressure Cold Spray Principles and Applications. pp. 17 - 66. ISBN 10: 162708097X.

Alba-Baena, N. and Eskin, D. (2016) 'Kinetics of Ultrasonic Degassing of Aluminum Alloys'. Springer International Publishing. pp. 957 - 962. ISSN: 2367-1181

Patel, JB., Lloyd, P., Peng, G. and Fan, Z. (2016) 'Development of the New High Shear Technology for Continuous Processing of Mg-Alloys for Ingot Casting', inMagnesium Technology 2016. Springer International Publishing. pp. 29 - 33. ISBN 13: 9783319486208.

Katsarou, L., Suresh, K., Rao, KP., Hort, N., Blawert, C., Mendis, CL. and Dieringa, H. et al. (2016) 'Microstructure and Properties of Magnesium Alloy Mg-1Zn-1Ca (ZX11)', inMagnesium Technology 2015. pp. 419 - 423.

Buzolin, RH., Tolnai, D., Mendis, CL., Stark, A., Schell, N., Pinto, H., Kainer, KU. and Hort, N. et al. (2016) 'Investigation of Compression Behavior of Mg-4Zn-2(Nd,Gd)-0.5Zr at 350°C by In Situ Synchrotron Radiation Diffraction', inMagnesium Technology 2015. pp. 103 - 107.

Joshi, U. and Babu, NH. (2016) 'The Role of Bismuth in Grain Refinement of Magnesium and Its Alloys', inMagnesium Technology 2015. pp. 91 - 94.

Al-Helal, K., Stone, I. and Fan, Z. (2016) 'Refinement of Primary Silicon Crystals by Novel Al-ZnS Master Alloy in Solidification of Hypereutectic Al-Si Alloys', inLight Metals 2016. Springer International Publishing. pp. 271 - 273. ISBN 13: 9783319486154.

Ji, S., Yang, H., Watson, D. and Fan, Z. (2016) 'Weibull Analysis for the Repeatibility of Die Castings Made by an Al-Mg-Si-Mn Alloy', inLight Metals 2016. Springer International Publishing. pp. 681 - 685. ISBN 13: 9783319486154.

Ji, S., Yan, F. and Fan, Z. (2016) 'A High Strength Aluminium Alloy for High Pressure Die Casting', inLight Metals 2016. Springer International Publishing. pp. 207 - 210. ISBN 13: 9783319486154.

Wang, Y., Zhou, L. and Fan, Z. (2016) 'Mechanism of Zirconium Poisoning Effect on TiB2 Inoculation in Aluminium Alloys', inLight Metals 2016. Springer International Publishing. pp. 725 - 729. ISBN 13: 9783319486154.

Tzanakis, I., Lebon, GSB., Eskin, DG. and Pericleous, K. (2016) 'Optimization of the Ultrasonic Processing in a Melt Flow', inLight Metals 2016. Springer International Publishing. pp. 833 - 836. ISBN 13: 9783319486154.

Manu, KMS., Sreeraj, K., Rajan, TPD., Shereema, RM., Pai, BC. and Arun, B. (2015) 'Structure and properties of modified compocast microsilica reinforced aluminum matrix composite'. MATERIALS & DESIGN, 88. pp. 294 - 301. ISSN: 0264-1275

LIU, G-Y., NI, S. and SONG, M. (2015) 'Effect of indentation size and grain/sub-grain size on microhardness of high purity tungsten'. Transactions of Nonferrous Metals Society of China, 25 (10). pp. 3240 - 3246. ISSN: 1003-6326

Ji, S., Fan, Z. and Bevis, M. (Accepted) 'Method and apparatus for producing semisolid metal slurries and shaped components'.

Lebon, GSB., Tzanakis, I., Pericleous, K. and Eskin, D. (2015) 'Comparison between low-order and high-order acoustic pressure solvers for bubbly media computations'. Journal of Physics: Conference Series, 656 (1). pp. 012134 - 012134. ISSN: 1742-6588 Open Access Link

Tzanakis, I., Lebon, GSB., Eskin, D. and Pericleous, K. (2015) 'Comparison of cavitation intensity in water and in molten aluminium using a high-temperature cavitometer'. Journal of Physics: Conference Series, 656 (1). pp. 012120 - 012120. ISSN: 1742-6588 Open Access Link

Yang, W., Liu, L., Zhang, J., Ji, S. and Fan, Z. (2015) '[ FAV requested] Heterogeneous nucleation in Mg-Zr alloy under die casting condition'. Materials Letters, 160. pp. 263 - 267. ISSN: 0167-577X Open Access Link

Que, ZP., Zhou, YP., Wang, Y. and Fan, Z. (2015) 'Effect of MgO on Phase Selection in Al–Mg–Si–Fe–Mn Alloys'. Transactions of the Indian Institute of Metals, 68 (6). pp. 1167 - 1172. ISSN: 0972-2815

Rahimian, M., Milenkovic, S., Maestro, L., Eguidazu Ruiz De Azua, A. and Sabirov, I. (2015) 'Development of tool for physical simulation of skin formation during investment casting of nickel-based superalloys'. Materials & Design, 87. pp. 712 - 720. ISSN: 0264-1275

De Giovanni, M., Warnett, JM., Williams, MA., Haribabu, N. and Srirangam, P. (2015) 'X-ray tomography investigation of intensive sheared Al–SiC metal matrix composites'. Materials Characterization, 110. pp. 258 - 263. ISSN: 1044-5803

Resmi, VG., Sree Manu, KM., Lakshmi, V., Brahmakumar, M., Rajan, TPD., Pavithran, C. and Pai, BC. et al. (2015) 'Processing of silica bonded porous SiC preform for metallic composites'. Journal of Porous Materials, 22 (6). pp. 1445 - 1454. ISSN: 1380-2224

Sree Manu, KM., Sreeraj, K., Rajan, TPD., Shereema, RM., Pai, BC. and Arun, B. (2015) 'Structure and properties of modified compocast microsilica reinforced aluminum matrix composite'. Materials & Design, 88. pp. 294 - 301. ISSN: 0264-1275

Huo, WT., Hou, LG. and Zhang, JS. (2015) 'Comments on “Electropulsing induced evolution of grain-boundary precipitates without loss of strength in the 7075 Al alloy” by Xu et al. [Materials Characterization 105 (2015) 90–94]'. Materials Characterization, 110. pp. 136 - 137. ISSN: 1044-5803

Lang, Y., Zhou, G., Hou, L., Zhang, J. and Zhuang, L. (2015) 'Significantly enhanced the ductility of the fine-grained Al–Zn–Mg–Cu alloy by strain-induced precipitation'. Materials & Design, 88. pp. 625 - 631. ISSN: 0264-1275

ZHANG, X., SUN, J., WANG, M., ZHANG, Y., MA, N. and WANG, H. (2015) 'Improvement of yttrium on the hot tearing susceptibility of 6TiB2/Al-5Cu composite'. Journal of Rare Earths, 33 (12). pp. 1335 - 1340. ISSN: 1002-0721

Höche, D., Blawert, C., Lamaka, SV., Scharnagl, N., Mendis, C. and Zheludkevich, ML. (2015) 'The effect of iron re-deposition on the corrosion of impurity-containing magnesium'. Physical Chemistry Chemical Physics, 18 (2). pp. 1279 - 1291. ISSN: 1463-9076 Open Access Link

Yang, W., Ji, S., Zhang, Q. and Wang, M. (2015) 'Investigation of mechanical and corrosion properties of an Al-Zn-Mg-Cu alloy under various ageing conditions and interface analysis of η' precipitate'. Materials and Design, 85. pp. 752 - 761. ISSN: 0264-1275 Open Access Link

Yang, H., Ji, S. and Fan, Z. (2015) 'Effect of heat treatment and Fe content on the microstructure and mechanical properties of die-cast Al-Si-Cu alloys'. Materials and Design, 85. pp. 823 - 832. ISSN: 0264-1275 Open Access Link

Fang, CM., van Huis, MA. and Sluiter, MHF. (2015) 'Formation, structure and magnetism of the γ-(Fe,M)23C6 (M = Cr, Ni) phases: A first-principles study'. Acta Materialia, 103. pp. 273 - 279. ISSN: 1359-6454 Open Access Link