Barekar, NS., Pradhan, R. and Dhindaw, BK. (2014) 'Mechanism of Microstructural Refinement of Al-Cu Alloy During Low Melt Sheared Slope Casting'. Journal of Materials Engineering and Performance, 23 (2). pp. 439 - 443. ISSN: 1059-9495

Szakács, G., Wiese, B., Mendis, CL., Tolnai, D., Stark, A., Schell, N., Nair, M., Kainer, KU. and Hort, N. et al. (2014) 'In Situ Synchrotron Radiation Diffraction during Solidification of Mg4Y and Mg4YxGd Alloys (x = 1, 4 wt.%)'. Wiley. pp. 213 - 218. ISSN: 1545-4150

Zhang, Y., Ma, N. and Wang, H. (2014) 'Improvement of yield strength of LM24 alloy'. Materials & Design (1980-2015), 54. pp. 14 - 17. ISSN: 0261-3069

Liu, CH., Li, XL., Wang, SH., Chen, JH., Teng, Q., Chen, J. and Gu, Y. et al. (2014) 'A tuning nano-precipitation approach for achieving enhanced strength and good ductility in Al alloys'. Materials & Design (1980-2015), 54. pp. 144 - 148. ISSN: 0261-3069

Manu, KMS., Resmi, VG., Joseph, P., Rajan, TPD., Pai, BC. and Srivatsan, TS. (2014) 'Fabrication and Characterization of a Hybrid Functionally Graded Metal‐Matrix Composite Using the Technique of Squeeze Infiltration'. Wiley. pp. 91 - 100.

Manu, KMS., Resmi, VG., Rajan, TPD., Joseph, P., Pai, BC. and Srivatsan, TS. (2014) 'Use of Squeeze Infiltration Processing for Fabricating Micro Silica Reinforced Aluminum Alloy‐Based Metal Matrix Composite'. Wiley. pp. 81 - 90.

Djambazov, G., Bojarevics, V., Lebon, B. and Pericleous, K. (2014) 'Contactless Acoustic Wave Generation in a Melt by Electromagnetic Induction', inLight Metals 2014. Wiley. , 9781118889084. pp. 1379 - 1382. ISBN 13: 9781118889084.

Srinivasan, A., Huang, Y., Mendis, CL., Blawert, C., Kainer, KU. and Hort, N. (2014) 'Investigations on microstructures, mechanical and corrosion properties of Mg–Gd–Zn alloys'. Materials Science and Engineering: A, 595. pp. 224 - 234. ISSN: 0921-5093

Vorozhtsov, S., Eskin, D., Vorozhtsov, A. and Kulkov, S. (2014) 'Physico‐Mechanical and Electrical Properties of Aluminum‐Based Composite Materials with Carbon Nanoparticles'. Wiley. pp. 1373 - 1377.

Wiese, B., Mendis, CL., Tolnai, D., Szakács, G., Stark, A., Schell, N., Reichel, HP., Brückner, R., Kainer, KU. and Hort, N. et al. (2014) 'In Situ Synchrotron Radiation Diffraction during Melting and Solidification of Mg‐Al Alloys Containing CaO'. Wiley. pp. 191 - 195. ISSN: 1545-4150

Maier, P., Mendis, C., Wolff, M. and Hort, N. (2014) 'Crack Propagation under Bending in Cast Mg10GdxNd‐T4 Alloys'. Wiley. pp. 77 - 82. ISSN: 1545-4150

Daneshian, B. and Assadi, H. (2014) 'Impact Behavior of Intrinsically Brittle Nanoparticles: A Molecular Dynamics Perspective'. Journal of Thermal Spray Technology, 23 (3). pp. 541 - 550. ISSN: 1059-9630

Rahimian, M., Milenkovic, S. and Sabirov, I. (2014) 'A physical simulation study of the effect of thermal variations on the secondary dendrite arm spacing in a Ni-based superalloy'. Philosophical Magazine Letters, 94 (2). pp. 86 - 94. ISSN: 0950-0839

Klösch, G., McKay, BJ. and Schumacher, P. (2014) 'Preliminary Investigation on the Grain Refinement Behavior of ZrB₂Particles in Mg‐Al Alloys', inEssential Readings in Magnesium Technology. Wiley. , 9781118858943. pp. 255 - 261. ISBN 13: 9781118858943.

Eskin, DG. (2014) 'Mechanisms and Control of Macrosegregation in DC Casting'. Wiley. pp. 851 - 860.

Barekar, NS., Pradhan, R. and Dhindaw, BK. (2014) 'Mechanism of microstructural refinement of Al-Cu alloy during low melt sheared slope casting'. Journal of Materials Engineering and Performance, 23 (2). pp. 439 - 443. ISSN: 1059-9495

Men, H. and Fan, Z. (2014) 'Atomic ordering in liquid aluminium induced by substrates with misfits'. Computational Materials Science, 85. pp. 1 - 7. ISSN: 0927-0256

Chen, D., Zou, C., Zhang, YJ., Ma, NH. and Wang, HW. (2014) 'Tensile Properties of 15wt. %TiB₂/7055 Composite Fabricated by In Situ Method'. Advanced Materials Research, 842. pp. 165 - 169. ISSN: 1022-6680

Dong, XX., He, LJ., Mi, GB. and Li, PJ. (2014) 'Simulative and Experimental Study on Electromagnetic Pump Supplying Liquid Alloys during Casting: Modeling and Effects of Design Parameters on Pump Height'. Trans Tech Publications, Ltd.. pp. 441 - 446. ISSN: 1660-9336

Mandal, M., Moon, AP., Deo, G., Mendis, CL. and Mondal, K. (2014) 'Corrosion behavior of Mg–2.4Zn alloy micro-alloyed with Ag and Ca'. Corrosion Science, 78. pp. 172 - 182. ISSN: 0010-938X

Mehrara, H., Eskin, DG., Petrov, RH., Lalpoor, M. and Katgerman, L. (2014) 'Linear Contraction Behavior of Low-Carbon, Low-Alloy Steels During and After Solidification Using Real-Time Measurements'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45A (March). pp. 1445 - 1456. ISSN: 1073-5623 Open Access Link

Djan, E., Vadakke Madam, S., Hari Babu, N., Tamayo-Ariztondo, J., Eskin, DG. and Fan, Z. (2014) 'Processing of metal matrix composites under external fields and their application as grain refiner'. TMS Light Metals, 9781118889084. pp. 1401 - 1404. ISSN: 0147-0809 Open Access Link

Barekar, NS., Das, S., Fan, ZY., Cinderey, R. and Champion, N. (2014) 'Microstructural Evaluation during Melt Conditioned Twin Roll Casting (MC-TRC) of Al-Mg Binary Alloys'. Materials Science Forum, 790-791. pp. 285 - 290. ISSN: 0255-5476

Peng, GS., Wang, Y., Xia, MX. and Fan, Z. (2014) 'Interaction between Zr addition and intensive melt shearing on grain refinement of commercial purity magnesium'. Materials Science Forum, 790-791. pp. 167 - 172. ISSN: 0255-5476

Balart, MJ., Patel, JB. and Fan, ZY. (2014) 'Grain Refinement of Phosphorus Deoxidised Copper'. Materials Science Forum, 790-791. pp. 161 - 166. ISSN: 0255-5476

Lamers, M., Hintzsche, LE., Butler, KT., Vullum, PE., Fang, C-M., Marsman, M., Jordan, G., Harding, JH., Kresse, G. and Weeber, A. et al. (2014) 'The interface of a-SiNx:H and Si: Linking the nano-scale structure to passivation quality'. Solar Energy Materials and Solar Cells, 120 (PART A). pp. 311 - 316. ISSN: 0927-0248

Yang, W., Ji, S., Huang, L., Sheng, X., Li, Z. and Wang, M. (2014) 'Initial precipitation and hardening mechanism during non-isothermal aging in an Al-Mg-Si-Cu 6005A alloy'. Materials Characterization, 94. pp. 170 - 177. ISSN: 1044-5803 Open Access Link

Yan, F., Kumar, S., McKay, BJ., McKay, BJ. and O'Reilly, KAQ. (2014) 'Effect of Mn on Fe containing phase formation in high purity aluminium'. International Journal of Cast Metals Research, 27 (4). pp. 202 - 206. ISSN: 1364-0461

Maier, P., Tober, G., Mendis, CL., Müller, S. and Hort, N. (2014) 'Influence of Nd in Extruded Mg10Gd Base Alloys on Fatigue Strength'. Trans Tech Publications, Ltd.. pp. 419 - 424. ISSN: 1022-6680

Maier, P., Tober, G., Mendis, CL., Müller, S. and Hort, N. (2014) 'Influence of Nd in extruded Mg10Gd base alloys on fatigue strength'. Materials Science Forum. pp. 419 - 424. ISSN: 0255-5476

Arabgol, Z., Assadi, H., Schmidt, T., Gärtner, F. and Klassen, T. (2014) 'Analysis of Thermal History and Residual Stress in Cold-Sprayed Coatings'.International Thermal Spray Conference (ITSC). Busan, SOUTH KOREA. Springer Science and Business Media LLC. pp. 84 - 90. ISSN: 1059-9630

List, A., Gärtner, F., Mori, T., Schulze, M., Assadi, H., Kuroda, S. and Klassen, T. et al. (2014) 'Cold Spraying of Amorphous Cu50Zr50 Alloys'. Journal of Thermal Spray Technology, 24 (1-2). pp. 108 - 118. ISSN: 1059-9630

Milenkovic, S., Rahimian, M., Sabirov, I. and Maestro, L. (2014) 'Effect of solidification parameters on the secondary dendrite arm spacing in MAR M-247 superalloy determined by a novel approach'.2nd European Symposium on Superalloys and their Applications. Giens, FRANCE. EDP Sciences. pp. 13004 - 13004. ISSN: 2261-236X

Tamayo-Ariztondo, J., Vadakke Madam, S., Djan, E., Eskin, DG., Hari Babu, N. and Fan, Z. (2014) 'Nanoparticles distribution and mechanical properties of aluminum-matrix nano-composites treated with external fields'. Minerals, Metals and Materials Society. pp. 1411 - 1415. ISSN: 0147-0809 Open Access Link

Bolzoni, L., Nowak, M. and Hari Babu, N. (2014) 'On the performance of a novel grain refiner in hyper-eutectic Al-Si cast alloys', inLight Metals 2014. Minerals, Metals and Materials Society. , 9781118889084. pp. 957 - 962. ISBN 13: 9781118889084. Open Access Link

Das, S., Barekar, NS. and Fan, ZY. (2014) 'Solidification Mechanism of the Melt Conditioned Twin Roll Cast Magnesium Alloy'. Trans Tech Publications, Ltd.. pp. 291 - 295. ISSN: 0255-5476

El Fakir, O., Das, S., Stone, I., Scamans, G., Fan, Z., Wang, L., Balint, D., Dear, JP. and Lin, J. et al. (2014) 'Solution heat treatment, forming and in-die quenching of a commercial sheet magnesium alloy into a complex-shaped component: experimentation and FE analysis'. Key Engineering Materials, 622-623. pp. 596 - 602. ISSN: 1013-9826 Open Access Link

Xia, MX., Li, JG. and Fan, ZY. (2014) 'Grain Refining through Semisolid Processing'. Trans Tech Publications, Ltd.. pp. 431 - 435. ISSN: 1012-0394

Vorozhtsov, S., Eskin, D., Vorozhtsov, A. and Kulkov, S. (2014) 'Physico-mechanical and electrical properties of aluminum-based composite materials with carbon nanoparticles'. Minerals, Metals and Materials Society. pp. 1373 - 1377. ISSN: 0147-0809 Open Access Link

Eskin, DG. (2014) 'Mechanisms and control of macrosegregation in DC casting'. Minerals, Metals and Materials Society. pp. 855 - 860. ISSN: 0147-0809 Open Access Link

Li, J. and Huang, Y. (2014) 'Microstructure and mechanical properties of an Mg-3Zn- o.5Zr-5HA nanocomposite processed by ECAE'.6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD). Metz, FRANCE. Institute of Physics Publishing. pp. 012112 - 012112. ISSN: 1757-8981 Open Access Link

Patel, JB., Li, H-T., Xia, M., Jones, S., Kumar, S., O'Reilly, K. and Fan, Z. et al. (2014) 'Melt Conditioned Direct Chill Casting (MC-DC) Process for Production of High Quality Aluminium Alloy Billets'.14th International Conference on Aluminium Alloys (ICAA). Trondheim, NORWAY. 1 - 19 June. TRANS TECH PUBLICATIONS LTD. pp. 149 - 154. ISSN: 0255-5476 Open Access Link

Barekar, NS., Das, S. and Fan, ZY. (2014) 'Melt Conditioned Twin Roll Casting (MC-TRC) for Aluminium Alloys'.14th International Conference on Aluminium Alloys (ICAA). Trondheim, NORWAY. 1 - 19 June. Trans Tech Publications, Ltd.. pp. 1115 - 1120. ISSN: 0255-5476

Yan, F., Ji, SX. and Fan, ZY. (2014) 'Effect of Cu on the microstructure and mechanical properties of diecast Al-Mg2Si-Mg based alloy'. Materials Science Forum, 794-796. pp. 172 - 177. ISSN: 0255-5476 Open Access Link

Yang, HL., Ji, SX., Watson, D., White, M. and Fan, ZY. (2014) 'Microstructure and mechanical properties of ductile aluminium alloy manufactured by recycled materials'. Materials Science Forum, 794-796. pp. 1077 - 1082. ISSN: 0255-5476 Open Access Link

Watson, D., Ji, SX. and Fan, ZY. (2014) 'A super-ductile alloy for the die-casting of aluminium automotive body structural components'. Materials Science Forum, 794-796. pp. 529 - 531. ISSN: 0255-5476 Open Access Link

Ji, SX., Wang, Y., Watson, D. and Fan, ZY. (2014) 'Microstructural characteristics of diecast almgsimn alloy'. Trans Tech Publications. pp. 234 - 239. ISSN: 1022-6680 Open Access Link

Bolzoni, L., Nowak, M. and Hari Babu, N. (2014) 'Effect of casting temperature on grain size of Al-Si alloys refined by a novel grain refiner'.14th International Conference on Aluminium Alloys (ICAA). Trondheim, NORWAY. Trans Tech Publications Ltd. pp. 77 - 82. ISSN: 0255-5476 Open Access Link

Sreekumar, VM., Babu, NH., Eskin, DG. and Fan, Z. (2014) 'Grain refinement efficiency of a new oxide-containing master alloy for aluminium casting alloys'.14th International Conference on Aluminium Alloys (ICAA). Trondheim, NORWAY. Trans Tech Publications Ltd. pp. 155 - 160. ISSN: 0255-5476 Open Access Link

Zhou, L. and Fan, ZY. (2014) 'Effect of Free Ti on Grain Refinment of Aluminium Inoculated with Potent TiB₂ Particles'. Materials Science Forum, 790-791. pp. 155 - 160. ISSN: 0255-5476