Huang, Y. and Young, RJ. (1995) 'Effect of fibre microstructure upon the modulus of PAN- and pitch-based carbon fibres'. Carbon, 33 (2). pp. 97 - 107. ISSN: 0008-6223

Huang, Y. and Young, RJ. (1995) 'Interfacial behaviour in high temperature cured carbon fibre/epoxy resin model composite'. Composites, 26 (8). pp. 541 - 550. ISSN: 0010-4361

Assadi, H. and Greer, AL. (1995) 'Application of Disorder Trapping Theory to the Solidification of Ni3Al'. ISIJ International, 35 (6). pp. 574 - 579. ISSN: 0915-1559

Assadi, H., Barth, M., Greer, AL., Herlach, DM. and Adeva, P. (1995) 'Microstructural development in rapidly solidified Ni3Al droplets'. Materials Science Forum, 179-181. pp. 741 - 746. ISSN: 0255-5476

Fang, CM., Ettema, ARHF., Haas, C., Wiegers, GA., Van Leuken, H. and De Groot, RA. (1995) 'Electronic structure of the misfit-layer compound (SnS)1.17NbS2 deduced from band-structure calculations and photoelectron spectra'. Physical Review B, 52 (4). pp. 2336 - 2347. ISSN: 0163-1829

Fan, Z. (1995) 'A new approach to the electrical resistivity of two-phase composites'. Acta Metallurgica Et Materialia, 43 (1). pp. 43 - 49. ISSN: 0956-7151

Fan, Z., Miodownik, AP., Chandrasekaran, L. and Ward-Close, CM. (1995) 'Microstructural investigation of a rapidly solidified Ti-6Al-4V-1B-0.5Y alloy'. Journal of Materials Science, 30 (7). pp. 1653 - 1660. ISSN: 0022-2461

FAN, ZY. (1995) 'A NEW APPROACH TO THE ELECTRICAL-RESISTIVITY OF 2-PHASE COMPOSITES'. ACTA METALLURGICA ET MATERIALIA, 43 (1). pp. 43 - 49. ISSN: 0956-7151

Chang, ITH., Cantor, B., Leigh, PA. and Dobson, PJ. (1995) 'Fabrication of Si/SiO2 nanocomposite thin films'. Nanostructured Materials, 6 (5-8). pp. 835 - 838. ISSN: 0965-9773

Chang, ITH. and Cantor, B. (1995) 'Temperature, composition and microstructure variations during pulsed laser irradiation of a deposited film on a substrate'. Acta Metallurgica Et Materialia, 43 (12). pp. 4411 - 4420. ISSN: 0956-7151

Stone, IC. and Tsakiropoulos, P. (1994) 'The effect of the spatial distribution of reinforcement on the fabrication and heat treatment of (Al4wt.%Cu)SiC particle metal matrix composites'. Materials Science and Engineering A, 189 (1-2). pp. 285 - 290. ISSN: 0921-5093

Scamans, GM., Creber, DK., Stannard, JH. and Tregenza, JE. (1994) 'Aluminum fuel cell power sources for long range unmanned underwater vehicles'. IEEE Sympsium on Autonomous Underwater Vehicle Technology. pp. 179 - 186.

Fan, Z. (1994) 'The β→ω transformation during room temperature aging in rapidly solidified Ti-6Al-4V alloy'. Scripta Metallurgica Et Materiala, 31 (11). pp. 1519 - 1524. ISSN: 0956-716X

Ji, S., Zhang, J., Wan, L. and Yang, G. (1994) 'New Method to Describe the Capability of Reclaimer in Resin Bonded Sand (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1994 (06). pp. 26 - 30. ISSN: 1001-3814

Wang, Y., Lorimer, GW. and Sale, FR. (1994) 'Microstructural development during consolidation of rapidly solidified AlFeVSi powder by VHP, extrusion and rolling'. Scripta Metallurgica Et Materiala, 31 (10). pp. 1337 - 1342. ISSN: 0956-716X

Ma, W., Ji, S., Zhang, J. and Yang, G. (1994) 'Design consideration for production line using full mould casting (in Chinese)'. China Foundry Equipment and Technology, 1994 (5). pp. 48 - 53. ISSN: 1006-9658

HAICHUNGAO., YANHUO., CHANGMINGFANG., CHANGMINSUN. and YIZHANG. (1994) 'Ionic conduction in oxysulfide glasses for the Li2SB2O3 (LiBr) systems'. Solid State Ionics, 73 (1-2). pp. 99 - 103. ISSN: 0167-2738

Chang, ITH., Ishii, K. and Cantor, B. (1994) 'Heat treatment of rapidly solidified Fe-Cr-Zr-B alloys'. Journal of Thermal Analysis, 42 (4). pp. 667 - 678. ISSN: 0368-4466

Ji, S., Zhang, J., Ma, W. and Yang, G. (1994) 'Moulding Technology in Full Mould Casting (in Chinese)'. China Foundry Equipment and Technology, 1994 (4). pp. 50 - 55. ISSN: 1006-9658

Ma, W., Zhang, J., Ji, S., Gao, J. and Yang, G. (1994) 'An experimental study on several new type sand mixing mechanisms (in Chinese)'. China Foundry Machinery and Technology, 1994 (04). pp. 34 - 39. ISSN: 1006-9658

Ji, S., Zhang, J., Ma, W., Yang, G. and Wang, W. (1994) 'Phenolic/Ester Cold-set process (in Chinese)'. China Foundry Machinery and Technology, 1994 (04). pp. 09 - 14. ISSN: 1006-9658

Fan, Z. and Tsakiropoulos, P. (1994) 'On the mean internal stresses in two-ductile-phase alloys'. Materials Science and Engineering A, 184 (1). pp. 57 - 64. ISSN: 0921-5093

Huang, Z., Huang, C., Ji, S. and Gao, J. (1994) 'A die structure for making motorway safety plate'.

Ji, S. and Gao, J. (1994) 'Insight of SO2 cold box in complex core-making technology (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1994 (03). pp. 14 - 17. ISSN: 1001-3814

Zhang, J., Ji, S. and Yang, G. (1994) 'Present situation and prospects of cold box process in casting production (in Chinese)'. Modern Cast Iron, 1994 (02). pp. 32 - 43. ISSN: 1003-8345

Chang, ITH., Ishii, K. and Cantor, B. (1994) 'Heat treatment of rapidly solidified Fe63Cr18Ti4B15'. Materials Science and Engineering A, 179-180 (PART 1). pp. 416 - 421. ISSN: 0921-5093

Lee, MH., Chang, ITH., Dobson, PJ. and Cantor, B. (1994) 'Microstructural characterization of nanocomposite thin films of AgSiO2, AgZnO and AgSi'. Materials Science and Engineering A, 179-180 (PART 1). pp. 545 - 551. ISSN: 0921-5093

Ji, S., Zhang, J., Xiong, Z., Wan, L. and Gao, J. (1994) 'Levelling valve'.

Zhang, J., Ji, S., Ma, W. and Yang, G. (1994) 'Progress in Full Mould Technology (in Chinese)'. China Foundry Equipment and Technology, 1994 (1). pp. 41 - 48. ISSN: 1006-9658

Ji, S. and Wang, W. (1994) 'The Performance Comparisons of Chemical Binder Cold-setting Processes (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1994 (01). pp. 1 - 6. ISSN: 1001-3814

Fan, Z., Miodownik, AP., Chandrasekaran, L. and Ward-Close, M. (1994) 'The Young's moduli of in situ Ti/TiB composites obtained by rapid solidification processing'. Journal of Materials Science, 29 (4). pp. 1127 - 1134. ISSN: 0022-2461

Eskin, DG. and Toropova, LS. (1994) 'Tensile and elastic properties of deformed heterogeneous aluminum alloys at room and elevated temperatures'. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 183 (1-2). pp. L1 - L4. ISSN: 0921-5093

Kharakterova, ML., Eskin, DG. and Toropova, LS. (1994) 'Precipitation hardening in ternary alloys of the Al-Sc-Cu and Al-Sc-Si systems'. Acta Metallurgica et Materialia, 42 (7). pp. 2285 - 2290. ISSN: 0956-7151

Charbon, C., Jacot, A. and Rappaz, M. (1994) '3D stochastic modelling of equiaxed solidification in the presence of grain movement'. Acta Metallurgica Et Materialia, 42 (12). pp. 3953 - 3966. ISSN: 0956-7151

Fan, Z. and Miodownik, AP. (1994) 'TEM study of metastable β-phase decomposition in rapidly solidified Ti-6Al-4V alloy'. Journal of Materials Science, 29 (24). pp. 6403 - 6412. ISSN: 0022-2461

Fan, Z. (1994) 'Observation of β→ω transformation at room temperature in rapidly solidified Ti–7·5Mn–0·5B alloy using transmission electron microscopy'. Materials Science and Technology United Kingdom, 10 (12). pp. 1021 - 1025. ISSN: 0267-0836

Fan, Z., Tsakiropoulos, P. and Miodownik, AP. (1994) 'A generalized law of mixtures'. Journal of Materials Science, 29 (1). pp. 141 - 150. ISSN: 0022-2461

Charbon, C., Jacot, A. and Rappaz, M. (1993) 'Three-dimensional probabilistic modelling of equiaxed eutectic solidification in the presence of convection'. Materials Science and Engineering A, 173 (1-2). pp. 143 - 148. ISSN: 0921-5093

Fan, Z., Miodownik, AP. and Tsakiropoulos, P. (1993) 'Microstructural characterisation of two phase materials'. Materials Science and Technology United Kingdom, 9 (12). pp. 1094 - 1100. ISSN: 0267-0836

Fan, Z. (1993) 'On the young's moduli of Ti6Al4V alloys'. Scripta Metallurgica Et Materiala, 29 (11). pp. 1427 - 1432. ISSN: 0956-716X

Fang, CM., Meetsma, A., Wiegers, GA. and Boom, G. (1993) 'Synthesis and crystal structure of F-type erbium sesquisulfide, F-ER2S3'. Journal of Alloys and Compounds, 201 (1-2). pp. 255 - 259. ISSN: 0925-8388

Fan, Z., Tsakiropoulos, P. and Miodownik, AP. (1993) 'Yield strength of two ductile phase alloys'. Materials Science and Technology United Kingdom, 9 (10). pp. 863 - 868. ISSN: 0267-0836

Chang, ITH. and Cantor, B. (1993) 'Microstructure of pulsed laser irradiated Sn and Ge-50 at.%Sn thin films on Ge single crystal substrates'. Thin Solid Films, 230 (2). pp. 167 - 178. ISSN: 0040-6090

Fang, C., Meetsma, A. and Wiegers, GA. (1993) 'Synthesis and Crystal Structure of Er2S3'.XVI IUCr Congress. Beijing, China. 1 - 29 August. International Union of Crystallography (IUCr). pp. c253 - c253. ISSN: 0906-1975 Open Access Link

Ji, S. (1993) 'Reclamation of ester hardened Phenolic sand (in Chinese)'. Foundry Engineering, 1993 (3). pp. 23 - 29. ISSN: 1673-3320

Ji, S. and Yang, G. (1993) 'Comprehensive classifying and coding system for castings (in Chinese)'. China Foundry Machinery, 1993 (2). pp. 18 - 21. ISSN: 1006-9658

Fan, Z. and Miodownik, AP. (1993) 'An empirical approach to strain to fracture of two-ductile-phase alloys'. Scripta Metallurgica Et Materiala, 28 (8). pp. 895 - 900. ISSN: 0956-716X

Huang, Y. and Ma, L. (1993) 'Diffusion bonding of superplastic Al alloy LC4'. Acta Metallurgica Sinica Series B Process Metallurgy Miscellaneous, 6 B (2). pp. 116 - 121. ISSN: 1000-9450

Ji, S. and Gao, J. (1993) 'Research progress of gas-hardened chemical binder core-making techniques (in Chinese)'. Foundry Engineering, 1993 (2). pp. 35 - 40. ISSN: 1673-3320

Stone, IC. and Tsakiropoulos, P. (1993) 'The spatial disttribution of reinforcement in PM Al/SiCp MMCs and its effect on their processing and properties'.Ninth International Conference on Composite Materials (ICCM/9). Madrid. Woodhead. pp. 271 - 278.

Eskin, D., Fedotov, S. and Toropova, LS. (1993) 'Mechanical and elastic properties of deformed binary aluminum alloys containing 10-20 vol.% of second phase'. Izvestiya Akademii Nauk SSSR. Metally. pp. 144 - 150. ISSN: 0568-5303