Cantor, B., Chang, ITH., Knight, P. and Vincent, AJB. (2004) 'Microstructural development in equiatomic multicomponent alloys'. Materials Science and Engineering: A, 375-377 (1-2 SPEC. ISS.). pp. 213 - 218. ISSN: 0921-5093

Men, H., Kim, WT. and Kim, DH. (2004) 'Glass formation and crystallization behavior in Mg65Cu25Y10−Gd (x=0, 5 and 10) alloys'. Journal of Non-Crystalline Solids, 337 (1). pp. 29 - 35. ISSN: 0022-3093

Fang, CM. and Wijs, GAD. (2004) 'Lattice vibrations and thermal properties of carbon nitride with defect ZnS structure from first-principles calculations'. Journal of Physics: Condensed Matter, 16 (18). pp. 3027 - 3034. ISSN: 0953-8984

Mathier, V., Jacot, A. and Rappaz, M. (2004) 'Coalescence of equiaxed grains during solidification'. Modelling and Simulation in Materials Science and Engineering, 12 (3). pp. 479 - 490. ISSN: 0965-0393

Fang, CM. and Metselaar, R. (2004) 'First-principles calculations of the stability and local structure of  -sialon ceramics on the line Si₃N₄–½Ca₃N₂:3AlN'. Journal of Physics: Condensed Matter, 16 (16). pp. 2931 - 2939. ISSN: 0953-8984

Eskin, DG., Katgerman, L., Suyitno. and Mooney, JF. (2004) 'Contraction of aluminum alloys during and after solidification'. Metallurgical and Materials Transactions A, 35 (4). pp. 1325 - 1335. ISSN: 1073-5623

Gili, E., Kunz, VD., de Groot, CH., Uchino, T., Ashburn, P., Donaghy, DC., Hall, S., Wang, Y. and Hemment, PLF. et al. (2004) 'Single, double and surround gate vertical MOSFETs with reduced parasitic capacitance'. Solid-State Electronics, 48 (4). pp. 511 - 519. ISSN: 0038-1101

McKay, BJ. and Schumacher, P. (2004) 'An investigative study of si poisoning in al-si alloys using the metallic glass technique'.Symposium on Solidification of Aluminum Alloys held at the TMS 2004 Annual Meeting. Charlotte, NC. 14 - 18 March. MINERALS, METALS & MATERIALS SOC. pp. 157 - 166.

Park, S-B., Stone, I. and Cantor, B. (2004) 'Rheocasting of aluminum alloys'.Symposium on Solidification of Aluminum Alloys held at the TMS 2004 Annual Meeting. Charlotte, NC. 14 - 18 March. MINERALS, METALS & MATERIALS SOC. pp. 257 - 266.

Suyitno., Eskin, D. and Katgerman, L. (2004) 'Effect of casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys'.TMS Annual Meeting. Charlotte. 14 - 18 March. TMS. pp. 47 - 52.

Hintzen, HT., Fang, CM. and de With, G. (2004) 'High-pressure phases of MgSiN 2 from first-principles calculations'. Applied Physics A: Materials Science & Processing, 78 (5). pp. 717 - 719. ISSN: 0947-8396

Burman, E., Jacot, A. and Picasso, M. (2004) 'Adaptive finite elements with high aspect ratio for the computation of coalescence using a phase-field model'. Journal of Computational Physics, 195 (1). pp. 153 - 174. ISSN: 0021-9991

Huang, Y. (2004) 'In situ observations of microstructural evolution during deformation of Supral 100'. Materials Science Forum, 447-448. pp. 381 - 386. ISSN: 0255-5476

Mishra, AK., Hari Babu, N., He, P., Isfort, D., Chaud, X., Ferendeci, AM., Cardwell, DA., Tournier, R., Mast, D. and Shi, D. et al. (2004) 'Surface resistance measurements of single domain YBa2Cu3Ox'. Physica C: Superconductivity, 402 (3). pp. 277 - 282. ISSN: 0921-4534

Sengupta, AK., Basak, CB., Jarvis, T., Bhagat, RK., Pandey, VD. and Majumdar, S. (2004) 'Effect of titania addition on hot hardness of UO2'. Journal of Nuclear Materials, 325 (2-3). pp. 141 - 147. ISSN: 0022-3115

Nygård, K., Huotari, S., Hämäläinen, K., Manninen, S., Buslaps, T., Hari Babu, N., Kambara, M. and Cardwell, DA. et al. (2004) 'Temperature dependence ofMgB2Compton profiles'. Physical Review B, 69 (2). ISSN: 1098-0121

Eskin, DG., Suyitno. and Katgerman, L. (2004) 'Mechanical properties in the semi-solid state and hot tearing of aluminium alloys'. Progress in Materials Science, 49 (5). pp. 629 - 711. ISSN: 0079-6425

Tang, H., Anjorin, VAO., Morgan, AJ., Wrobel, LC., Barton, IE. and Fan, Z. (2004) 'Numerical and experimental investigation of the morphology development of expansion clouds by a powder jet flow'. Fire Safety Journal, 39 (7). pp. 601 - 617. ISSN: 0379-7112 Open Access Link

Tang, H., Wrobel, LC. and Fan, Z. (2004) 'Numerical evaluation of immiscible metallic Zn-Pb binary alloys in shear-induced turbulent flow'. Materials Science and Engineering A, 365 (1-2). pp. 325 - 329. ISSN: 0921-5093

Das, A. and Fan, Z. (2004) 'A Monte Carlo simulation of solidification structure formation under melt shearing'. Materials Science and Engineering A, 365 (1-2). pp. 330 - 335. ISSN: 0921-5093

Tang, H., Wrobel, LC. and Fan, Z. (2004) 'Tracking of immiscible interfaces in multiple-material mixing processes'. Computational Materials Science, 29 (1). pp. 103 - 118. ISSN: 0927-0256

Liu, YQ., Das, A. and Fan, Z. (2004) 'Thermodynamic predictions of Mg-Al-M (M = Zn, Mn, Si) alloy compositions amenable to semisolid metal processing'. Materials Science and Technology, 20 (1). pp. 35 - 41. ISSN: 0267-0836

Reddy, ES., Babu, NH., Shi, Y. and Cardwell, DA. (2004) 'The existence of a highly undercooled state during the formation of Y₂BaCuO₅in large grain Y–Ba–Cu–O superconductors'. Superconductor Science and Technology, 17 (1). pp. L1 - L5. ISSN: 0953-2048

Diko, P., Zmorayová, K., Babu, NH., Krabbes, G. and Cardwell, DA. (2004) 'The influence of the addition of depleted uranium on particle pushing in melt-processed, bulk Y–Ba–Cu–O'. Superconductor Science and Technology, 17 (1). pp. 186 - 193. ISSN: 0953-2048

Cantor, B., Dunne, FPE. and Stone, IC. (2004) 'Metal and ceramic matrix composites'. Institute of Physics, Taylor & Francis. ISSN 10: 0750308729 ISSN 13: 9780750308724

Belov, NA., Alabin, AN. and Eskin, DG. (2004) 'Improving the properties of cold-rolled Al–6%Ni sheets by alloying and heat treatment'. Scripta Materialia, 50 (1). pp. 89 - 94. ISSN: 1359-6462

Suyitno, A., Eskin, DG., Savran, VI. and Katgerman, L. (2004) 'Effects of alloy composition and casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys'. Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 35 A (11). pp. 3551 - 3561. ISSN: 1073-5623

Eskin, DG., Suyitno., Mooney, JF. and Katgerman, L. (2004) 'Contraction of aluminum alloys during and after solidification'. Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 35 A (4). pp. 1325 - 1335. ISSN: 1073-5623

Eskin, D., Stangeland, A., Mo, A., Nielsen, O. and M'Hamdi, M. (2004) 'Development of thermal strain in the coherent mushy zone during solidification of aluminum alloys'. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 35A (9). pp. 2903 - 2915. ISSN: 1073-5623

Suyitno., Eskin, DG. and Katgerman, L. (2004) 'Thermal contraction of AA5182 and AA5083: Experiment and Simulation'.Aluminium Alloys: Their Physical and Mechanical Properties, ICAA9. Brusbane. Institute of Materials Engineering Australasia Ltd. pp. 1309 - 1315.

Eskin DG., Zuidema, J., Savran, VI. and Katgerman, L. (2004) 'Effect of process parameters on structure formation during direct-chill casting of an Al-Cu alloy'.Aluminium Alloys: Their Physical and Mechanical Properties, ICAA9. Brisbane. Institute of Materials Engineering Australasia Ltd. pp. 487 - 493.

El Mubarek, HAWA., Wang, Y., Bonar, JM., Hemment, P. and Ashburn, P. (2004) 'The Effect of Fluorine Implantation on Boron Diffusion in Metastable Si_0.86 Ge_0.14'. Springer Science and Business Media LLC. pp. 375 - 380. ISSN: 0272-9172

Robson, JD., McKay, B. and Heason, CP. (2004) 'Modelling Dispersoid Precipitation and Recrystallization in Scandium and Zirconium Containing Aluminium Alloys'.Proc. 9th International Conference on Aluminium Alloys (ICAA9). Brisbane.

Ambat, R., Davenport, AJ., Afseth, A. and Scamans, G. (2004) 'Electrochemical Behavior of the Active Surface Layer on Rolled Aluminum Alloy Sheet'. Journal of The Electrochemical Society, 151 (2). pp. B53 - B53. ISSN: 0013-4651

NADENDLA., Reddy, E.S., Cardwell, D.A. and Campbell, A.M. (2003) 'Artificial flux pinning centers in large, single grain (RE)-Ba-Cu-O superconductors'. Applied Physics Letters, 83 (23). pp. 4806 - 4808. ISSN: 0003-6951

Huang, Y. and Humphreys, FJ. (2003) 'The pinning of grain boundaries during the recrystallization of an Al-0.3Mn-0.15Si alloy'. Materials Science Forum, 426-432. pp. 501 - 506. ISSN: 0255-5476

Warrender, TE., Aspinwall, DK., Dewes, RC., Simao, JMT., Aspinwall, EM. and Scamans, G. (2003) 'Difficulties in characterising roll surfaces'. Laser Metrology and Machine Performance Vi. pp. 55 - 64.

Kunz, VD., De Groot, CH., Anteney, IM., Abdul-Rahim, AI., Hall, S., Hemment, PLF., Wang, Y. and Ashburn, P. et al. (2003) 'Modelling of gain control in SiGe HBTs and Si bipolar transistors by Ge incorporation in the polysilicon emitter'. 2003 Nanotechnology Conference and Trade Show Nanotech 2003. pp. 16 - 19.

Katgerman, L., Eskin, DG., Venneker, BCH., Zuidema, J. and Suyitno. (2003) 'Experimental description and process simulation of direct chill (DC) casting of aluminum alloys'. Proceedings of the Australian Asian Pacific Conference on Aluminium Cast House Technology. pp. 243 - 257.

Rappaz, M., Drezet, JM., Grasso, PD. and Jacot, A. (2003) 'Hot tearing and coalescence: Two deeply-connected phenomena'.10th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. DESTIN, FL. 3 - 30 May. MINERALS, METALS & MATERIALS SOC. pp. 53 - 60.

Jacot, A., Du, Q. and Rappaz, M. (2003) 'A 2-dimensional microsegregation model coupled to a thermodynamic database for the prediction of solidification microstructures in multi-component alloys'.10th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. DESTIN, FL. 3 - 30 May. MINERALS, METALS & MATERIALS SOC. pp. 229 - 236.

Reddy, ES., Babu, NH., Shi, Y., Cardwell, DA. and Schmitz, GJ. (2003) 'Processing of single domain Y–Ba–Cu–O with pre-defined 3D interconnected porosity for bulk reinforcement'. Superconductor Science and Technology, 16 (11). pp. L40 - L43. ISSN: 0953-2048

Babu, NH., Reddy, ES., Cardwell, DA. and Campbell, AM. (2003) 'New chemically stable, nano-size artificial flux pinning centres in (RE)–Ba–Cu–O superconductors'. Superconductor Science and Technology, 16 (11). pp. L44 - L45. ISSN: 0953-2048

Kambara, M., Babu, NH., Cardwell, DA. and Campbell, AM. (2003) 'Solidification path of Y_xNd_1 x+yBa_2 yCu₃O₆₊ superconducting composites'. Superconductor Science and Technology, 16 (11). pp. 1286 - 1293. ISSN: 0953-2048

Diko, P., Zmorayová, K., Hari Babu, N. and Cardwell, DA. (2003) 'Shape change during solidification of bulk, single grain Y–Ba–Cu–O samples fabricated by top seeded melt growth'. Physica C: Superconductivity, 398 (1-2). pp. 1 - 7. ISSN: 0921-4534

Fang, CM. and Metselaar, R. (2003) 'First–Principles Calculations of Microdomain Models for β–Sialon Si₅AlON₇'. Journal of the American Ceramic Society, 86 (11). pp. 1956 - 1958. ISSN: 0002-7820

Basak, CB., Sengupta, AK. and Kamath, HS. (2003) 'Classical molecular dynamics simulation of UO2 to predict thermophysical properties'. Journal of Alloys and Compounds, 360 (1-2). pp. 210 - 216. ISSN: 0925-8388

NADENDLA., Cardwell, D.A., Kambara, M. and Shi, Y. (2003) 'The chemical composition of uranium-containing phase particles in U-doped YBCO melt-processed superconductor'. Physica C: Superconductivity, 392-396 (Part 1). pp. 110 - 115. ISSN: 0921-4534

VANBOGGELEN, J., ESKIN, D. and KATGERMAN, L. (2003) 'First stages of grain coarsening in semi-solid Al?Cu alloys'. Scripta Materialia, 49 (7). pp. 717 - 722. ISSN: 1359-6462

Fang, CM., Kools, F., Metselaar, R., With, GD. and Groot, RAD. (2003) 'Magnetic and electronic properties of strontium hexaferrite SrFe₁₂O₁₉from first-principles calculations'. Journal of Physics: Condensed Matter, 15 (36). pp. 6229 - 6237. ISSN: 0953-8984

Assadi, H., Gartner, F., Stoltenhoff, T. and Kreye, H. (2003) 'Bonding mechanism in cold gas spraying'. ACTA MATERIALIA, 51 (15). pp. 4379 - 4394. ISSN: 1359-6454