Dasgupta, K., Sen, D., Mazumder, S., Basak, CB., Joshi, JB. and Banerjee, S. (2010) 'Optimization of Parameters by Taguchi Method for Controlling Purity of Carbon Nanotubes in Chemical Vapour Deposition Technique'. Journal of Nanoscience and Nanotechnology, 10 (6). pp. 4030 - 4037. ISSN: 1533-4880

Zarif, M., McKay, B. and Schumacher, P. (2010) 'Study of heterogeneous nucleation in high purity Al-Si alloys with Sr addition', in MINERALS, METALS & MATERIALS SOC. , 2. pp. 381 - 388. ISBN 13: 978-0-87339-752-0.

McKay, BJ., Nunner, G., Geier, GF. and Schumacher, P. (2010) 'Impurities in Al-5Ti-1B (wt.%) grain refiner rod', in Johnson, JA. (ed.) MINERALS, METALS & MATERIALS SOC. pp. 613 - 618. ISBN 13: 978-0-87339-747-6.

Oh-Ishi, K., Mendis, CL., Watanabe, R. and Hono, K. (2010) 'Influence of Zn additions on age hardening response and microstructure of error Mg-0.3at.%Ca alloys'.Magnesium Technology Symposium 2010. Seattle, WA. 21 - 18 February. MINERALS, METALS & MATERIALS SOC. pp. 517 - 520. ISSN: 1545-4150

Tzamtzis, S., Zhang, H., Babu, NH. and Fan, Z. (2010) 'Microstructural refinement of AZ91D die-cast alloy by intensive shearing'. Materials Science and Engineering A, 527 (12). pp. 2929 - 2934. ISSN: 0921-5093

Zhang, L., Eskin, DG., Lalpoor, M. and Katgerman, L. (2010) 'Factors affecting thermal contraction behavior of an AA7050 alloy'. Materials Science and Engineering: A, 527 (13-14). pp. 3264 - 3270. ISSN: 0921-5093

Fang, CM., van Huis, MA., Sluiter, MHF. and Zandbergen, HW. (2010) 'Stability, structure and electronic properties of γ-Fe23C6 from first-principles theory'. Acta Materialia, 58 (8). pp. 2968 - 2977. ISSN: 1359-6454

Imbaby, M., Jiang, K. and Chang, I. (2010) 'Fabrication of 316-L stainless steel micro components using encapsulating soft mould and isopressing technique'. Microelectronic Engineering, 87 (5-8). pp. 1623 - 1628. ISSN: 0167-9317

Homma, T., Mendis, CL., Hono, K. and Kamado, S. (2010) 'Effect of Zr addition on the mechanical properties of as-extruded Mg–Zn–Ca–Zr alloys'. Materials Science and Engineering: A, 527 (9). pp. 2356 - 2362. ISSN: 0921-5093

Saeid, T., Abdollah-Zadeh, A., Shibayanagi, T., Ikeuchi, K. and Assadi, H. (2010) 'EBSD investigation of friction stir welded duplex stainless steel'. World Academy of Science Engineering and Technology, 61. pp. 376 - 379. ISSN: 2010-376X

Li, YQ., Fang, CM., Fang, Y., Delsing, ACA., de With, G. and Hintzen, HT. (2010) 'ChemInform Abstract: Electronic Structure and Photoluminescence Properties of Eu²⁺‐Activated Ca₂BN₂F.'. ChemInform, 41 (10). ISSN: 0931-7597

Huang, Y., Robson, JD. and Prangnell, PB. (2010) 'The formation of nanograin structures and accelerated room-temperature theta precipitation in a severely deformed Al–4 wt.% Cu alloy'. Acta Materialia, 58 (5). pp. 1643 - 1657. ISSN: 1359-6454

Cui, H., Hou, L. and Zhang, J. (2010) 'Microstructure optimization of Fe-contained hypereutectic Al-Si alloys by Cr-alloying and its mechanism'. Xiyou Jinshu Chinese Journal of Rare Metals, 34 (2). pp. 178 - 185. ISSN: 0258-7076

Lalpoor, M., Eskin, DG., ten Brink, G. and Katgerman, L. (2010) 'Microstructural features of intergranular brittle fracture and cold cracking in high strength aluminum alloys'. Materials Science and Engineering: A, 527 (7-8). pp. 1828 - 1834. ISSN: 0921-5093

Eskin, DG., Atamanenko, TV., Zhang, L. and Katgerman, L. (2010) 'On the mechanism of grain refinement by ultrasonic melt treatment in the presence of transition metals'.Technical Session on Light Metals 2010 held at the 139th TMS Annual Meeting. Seattle, WA. 14 - 18 February. MINERALS, METALS & MATERIALS SOC. pp. 607 - 611. ISSN: 0147-0809

Huang, Y. and Prangnell, PB. (2010) 'Room temperature instability of supersaturated solid solution in a nanocrystalline Al-4Cu alloy produced by SPD'.6th International Symposium on Ultrafine Grained Materials. Seattle, USA. 14 - 16 February.

Xia, M., Mitra, S., Dhindaw, B., Liu, G. and Fan, Z. (2010) 'Melt-conditioned, high-pressure die casting of Mg–Zn–Y alloy'. Meatallurgical and Materials Transactions B, 41 (1). pp. 209 - 213. ISSN: 1073-5615 Open Access Link

Rahimian, M., Parvin, N. and Ehsani, N. (2010) 'Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy'. Materials Science and Engineering: A, 527 (4-5). pp. 1031 - 1038. ISSN: 0921-5093

Mendis, CL., Oh-ishi, K. and Hono, K. (2010) 'Effect of Al additions on the age hardening response of the Mg–2.4Zn–0.1Ag–0.1Ca (at.%) alloy—TEM and 3DAP study'. Materials Science and Engineering: A, 527 (4-5). pp. 973 - 980. ISSN: 0921-5093

Hua, X-S., Zhang, Y-J. and Wang, H-W. (2010) 'The effect of texture unit shape on silicon surface on the absorption properties'. Solar Energy Materials and Solar Cells, 94 (2). pp. 258 - 262. ISSN: 0927-0248

Lazaro Nebreda, J., Solorzano, E., Rodríguez-Pérez, MA. and de Saja, JA. (2010) 'Pore interconnection of aluminium foams: effect of production parameters'.6th Biennial International Conference on Porous Metals and Metallic Foams (MetFoam 2009). Bratislava, Slovakia. [unpublished]

Lazaro Nebreda, J., Solorzano, E., Rodríguez-Pérez, MA. and de Saja, JA. (2010) 'Effect of microstructural anisotropy of PM precursors on foaming expansion'.6th Biennial International Conference on Porous Metals and Metallic Foams (MetFoam 2009). Bratislava, Slovakia. Proceedings of the 6th International Conference on Porous Metals and Metallic Foams (MetFoam2009)..

Fang, C., van Huis, MA., Vanmaekelbergh, D. and Zandbergen, HW. (2010) 'Energetics of Polar and Nonpolar Facets of PbSe Nanocrystals from Theory and Experiment'. ACS Nano, 4 (1). pp. 211 - 218. ISSN: 1936-0851

Cardwell, DA., Shi, Y-H., Babu, NH., Pathak, SK., Dennis, AR. and Iida, K. (2010) 'Top seeded melt growth of Gd–Ba–Cu–O single grain superconductors'. Superconductor Science and Technology, 23 (3). pp. 034008 - 034008. ISSN: 0953-2048

Shi, Y., Dennis, AR., Xu, Z., Campbell, AM., Babu, NH. and Cardwell, DA. (2010) 'Field trapping of a joined Y-Ba-Cu-O single grain rings joined to form the geometry of a solenoid'. Superconductor Science and Technology, 23 (4). pp. 045014 - 045014. ISSN: 0953-2048

Knijn, PJ., van Bentum, PJM., van Eck, ERH., Fang, C., Grimminck, DLAG., de Groot, RA., Havenith, RWA., Marsman, M., Meerts, WL., de Wijs, GA. and Kentgens, APM. et al. (2010) 'A solid-state NMR and DFT study of compositional modulations in AlxGa1−xAs'. Physical Chemistry Chemical Physics, 12 (37). pp. 11517 - 11517. ISSN: 1463-9076

Scamans, GM., Birbilis, N. and Buchheit, RG. (2010) 'Corrosion of Aluminum and its Alloys', inShreir's Corrosion. Elsevier. pp. 1974 - 2010. ISBN 13: 9780444527875.

Atamanenko, TV., Eskin, DG., Zhang, L. and Katgerman, L. (2010) 'Criteria of Grain Refinement Induced by Ultrasonic Melt Treatment of Aluminum Alloys Containing Zr and Ti'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. pp. 1 - 11. ISSN: 1073-5623

Dashwood, RJ., Klaumunzer, D., Jackson, M., Fan, ZY. and Grimes, R. (2010) 'The Development of Superplastic Magnesium Alloy Sheet'. Key Engineering Materials, 433. pp. 273 - 279. ISSN: 1013-9826

Jafari, A., Seyedein, SH., Aboutalebi, MR., Eskin, DG. and Katgerman, L. (2010) 'Numerical modeling of macrosegregation during the direct-chill casting of an Al alloy billet'. Iranian Journal of Materials Science and Engineering, 7 (3). pp. 39 - 50. ISSN: 1735-0808

Eskin, DG., Atamanenko, TV., Zhang, L. and Katgerman, L. (2010) 'Ultrasonic treatment of aluminum alloys for grain refinement'.11th International Aluminium Conference INALCO 2010; New Frontiers in Light Metals. Eindhoven. IOS Press. pp. 281 - 288.

Eskin, GI. and Eskin, DG. (2010) 'Ultrasonic processing for grain refinement'.12th International Conference on Aluminum Alloys (ICAA12). Yokohama. Japan Institute of Light Metals. pp. 638 - 645.

Eskin, DG. (2010) 'Mechanisms of macrosegregation in direct-chill casting of aluminium alloys'.12th International Conference on Aluminum Alloys (ICAA12). Yokohama. Japan Institute of Light Metals. pp. 185 - 192.

Lalpoor, M., Eskin, DG. and Katgerman, L. (2010) 'On the development of cold cracking criterion for DC-casting of high strength aluminum alloys'.12th International Conference on Aluminum Alloys (ICAA12). Yokohama. Japan Institute of Light Metals. pp. 727 - 732.

Eskin, D., Lalpoor, M. and Katgerman, L. (2010) 'Numerical simulation of residual thermal stresses in AA7050 alloy during DC casting using Alsim 5'. Advanced Materials Research, 89-91. pp. 319 - 324. ISSN: 1022-6680

Eskin, DG., Faraji, M. and Katgerman, L. (2010) 'Grain refinement in hypoeutectic Al-Si alloys using ultrasonic vibrations'. International Foundry Research, 62 (2). pp. 20 - 25. ISSN: 0046-5933

Zuo, Y., Li, H., Xia, M., Jiang, B., Scamans, GM. and Fan, Z. (2010) 'Refining grain structure and porosity of an aluminium alloy with intensive melt shearing'. Scripta Materialia. ISSN: 1359-6462

Li, HT., Xia, M., Jarry, P., Scamans, GM. and Fan, Z. (2010) '[DUPLICATE ENTRY] Grain refinement in a AlZnMgCuTi alloy by intensive melt shearing: A multi-step nucleation mechanism'. Journal of Crystal Growth. ISSN: 0022-0248

Cardwell, DA., Yeoh, WK., Pathak, SK., Shi, Y-H., Dennis, AR., Babu, NH., Iida, K. and Balachandran, UB. et al. (2010) 'THE GENERATION OF HIGH TRAPPED FIELDS IN BULK (RE)BCO HIGH TEMPERATURE SUPERCONDUCTORS'.TRANSACTIONS OF THE INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE—ICMC: Advances in Cryogenic Engineering Materials. Tucson, AZ. AIP. pp. 397 - 406. ISSN: 0094-243X

Wang, Y., Xia, M., Fan, Z., Zhou, X. and Thompson, GE. (2010) 'The effect of Al8Mn5 intermetallic particles on grain size of as-cast Mg-Al-Zn AZ91D alloy'. Intermetallics. ISSN: 0966-9795

Shi, Y-H., Yoeh, W., Dennis, R., Hari Babu, N., Pathak, S., Xu, Z. and Cardwell, A. et al. (2010) 'Growth rate of YBCO single grains containing Y-2411(M)'. Journal of Physics: Conference Series, 234 (PART 1). pp. 012039 - 012039. ISSN: 1742-6588 Open Access Link

Mikheenko, P., Abell, JS., Sarkar, A., Dang, VS., Awang Kechik, MM., Tanner, JL., Paturi, P., Huhtinen, H., Hari Babu, N., Cardwell, DA. and Crisan, A. et al. (2010) 'Self-assembled artificial pinning centres in thick YBCO superconducting films'. Journal of Physics: Conference Series, 234 (PART 2). pp. 022022 - 022022. ISSN: 1742-6588 Open Access Link

Bodea, MA., Pedarnig, JD., Withnell, TD., Weber, HW., Cardwell, DA., Hari Babu, N. and Koblischka-Veneva, A. et al. (2010) 'Characterization of nano-composite M-2411/Y-123 thin films by electron backscatter diffraction and in-field critical current measurements'. Journal of Physics: Conference Series, 234 (PART 1). pp. 012006 - 012006. ISSN: 1742-6588 Open Access Link

Zarif, M., Mckay, B. and Schumacher, P. (2010) 'Study of Heterogeneous Nucleation of Eutectic Si in High-Purity Al-Si Alloys with Sr Addition'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. pp. 1 - 8. ISSN: 1543-1940

Garcia-Escorial, A., Echevarria, M., Lieblich, M. and Stone, I. (2010) 'Characterisation of an Al93Fe3Cr2Ti 2 alloy obtained by spray forming'. Journal of Alloys and Compounds, 504 (SUPPL. 1). pp. S519 - S522. ISSN: 0925-8388

Men, H., Jiang, B. and Fan, Z. (2010) 'Mechanisms of grain refinement by intensive shearing of AZ91 alloy melt'. Acta Materialia. ISSN: 1359-6454

Fan, Z., Xia, M., Bian, Z., Bayandorian, I., Cao, L., Li, H. and Scamans, GM. et al. (2010) 'Refinement of Solidification Microstructures by the MCAST Process'. Materials Science Forum, 649. pp. 315 - 323. ISSN: 0255-5476

Fan, Z., Xia, M., Wang, Y., Arumuganathar, S. and Scamans, GM. (2010) 'Shear Enhanced Heterogeneous Nucleation in AZ91D Alloy'. Materials Science Forum, 649. pp. 301 - 306. ISSN: 0255-5476

McMurray, HN., Holder, A., Williams, G., Scamans, GM. and Coleman, AJ. (2010) 'The kinetics and mechanisms of filiform corrosion on aluminium alloy AA6111'. Electrochimica Acta. ISSN: 0013-4686

Galano, M., Audebert, F., Garcia Escorial, A., Stone, IC. and Cantor, B. (2010) 'Nanoquasicrystalline Al-Fe-Cr-based alloys with high strength at elevated temperature'. Journal of Alloys and Compounds, 495 (2). pp. 372 - 376. ISSN: 0925-8388

Kotadia, HR., Babu, NH., Zhang, H. and Fan, Z. (2010) 'Microstructural refinement of Al–10.2%Si alloy by intensive shearing'. Materials Letters, 64 (6). pp. 671 - 673. ISSN: 0167-577X