Wang, J., Li, W., Yang, H., Huang, H., Ji, S., Ruan, J. and Liu, Z. et al. (2020) 'Corrosion behavior of CoCrNi medium-entropy alloy compared with 304 stainless steel in H2SO4 and NaOH solutions'. Corrosion Science, 177 (December 2020). pp. 1 - 11. ISSN: 0010-938X Open Access Link

Hou, LG., Xiao, WL., Su, H., Wu, CM., Eskin, DG., Katgerman, L., Zhuang, LZ. and Zhang, JS. et al. (2020) 'Room-temperature low-cycle fatigue and fracture behaviour of asymmetrically rolled high-strength 7050 aluminium alloy plates'. International Journal of Fatigue, Volume 142 (January 2021). pp. 1 - 15. ISSN: 0142-1123 Open Access Link

Khan, MA., Wang, Y., Cheng, H., Yasin, G., Malik, A., Nazeer, F., Ahmad, T., Khan, WQ., Kamran, M. and Afifi, MA. et al. (2020) 'Microstructure evolution of an artificially aged Al-Zn-Mg-Cu alloy subjected to soft- And hard-steel core projectiles'. Journal of Materials Research and Technology, 9 (5). pp. 11980 - 11992. ISSN: 2238-7854 Open Access Link

Li, Z., Limodin, N., Tandjaoui, A., Quaegebeur, P., Witz, J-F. and Balloy, D. (2020) 'In-situ 3D characterization of tensile damage mechanisms in A319 aluminium alloy using X-ray tomography and digital volume correlation'. Materials Science and Engineering: A, 794. pp. 139920 - 139920. ISSN: 0921-5093

Dong, X., Youssef, HY., Zhu, X., Zhang, Y., Wang, S. and Ji, S. (2020) 'High as-cast strength die-cast AlSi9Cu2Mg alloy prepared by nanoparticle strengthening with industrially acceptable ductility'. Journal of Alloys and Compounds, 852 (25 January 2021). pp. 1 - 12. ISSN: 0925-8388 Open Access Link

Fang, CM., Que, ZP., Dinsdale, A. and Fan, Z. (2020) 'Si solution in θ-Al13Fe4 from first-principles'. Intermetallics, 126 (November 2020). pp. 1 - 7. ISSN: 0966-9795 Open Access Link

Hong, D., Wang, H., Hou, L., Ou, P., Wang, Y. and Zhao, H. (2020) 'Effect of aging treatment on microstructure and properties of the Fe55(Cocrni)10(MOV)5c5 medium-entropy alloy'. Metals, 10 (8). pp. 1 - 13.

Lebon, B., Lazaro Nebreda, J., Patel, JB. and Fan, Z. (2020) 'Numerical Assessment of In-line Rotor-Stator Mixers in High-Shear Melt Conditioning (HSMC) Technology'. JOM Journal of the Minerals, Metals and Materials Society, 72 (11). pp. 4092 - 4100. ISSN: 1047-4838 Open Access Link

Wang, J., Yang, H., Huang, H., Zou, J., Ji, S. and Liu, Z. (2020) 'High strength-ductility Co23Cr23Ni23Mn31 medium-entropy alloy achieved via defect engineering'. Materials Science and Engineering A, 796 (7 October 2020). pp. 1 - 7. ISSN: 0921-5093 Open Access Link

Lebon, GSB. and Hatch, T. (2020) 'Cavitometer Deconvolve'. (0.0.1) [Computer program]. Available at: https://zenodo.org/record/3976852.

Wang, H., Hong, D., Hou, L., Ou, P., Wang, Z., Shen, L. and Zhao, H. et al. (2020) 'Influence of tempering temperatures on the microstructure, secondary carbides and mechanical properties of spray-deposited AISI M3:2 high-speed steel'. Materials Chemistry and Physics, 255. pp. 123554 - 123554. ISSN: 0254-0584

Eskin, DG. (2020) 'The scandium story -- Part II: Impact on aluminum alloys and their applications'. Light Metal Age -Chicago-, 78 (5). pp. 40 - 44. ISSN: 0024-3345 Open Access Link

Cao, S., Zeng, L., Xia, M., Xu, M., Ge, X., Wang, Y., Lu, W., Fu, Y., Xie, HL. and Li, J. et al. (2020) 'Quantitative Relationship Between the Nucleation Undercooling of Liquid Iron and Its Liquid Structure: Investigated by In Situ Synchrotron Radiation'. Metallurgical and Materials Transactions A, 51 (8). pp. 3754 - 3758. ISSN: 1073-5623

Dong, X., Li, P., Amirkhanlou, S., Ji, S., Popel, PS., Dahlborg, U. and Calvo-Dahlborg, M. et al. (2020) 'Evidence of disruption of Si-rich microstructure in engineering-lightweight Al–12.2at.%Si alloy melt above liquidus temperature'. Scientific Reports, 10 (1). pp. 1 - 11. ISSN: 2045-2322 Open Access Link

Huang, H., Wang, J., Yang, H., Ji, S., Yu, H. and Liu, Z. (2020) 'Strengthening CoCrNi medium-entropy alloy by tuning lattice defects'. Scripta Materialia, 188 (November 2020). pp. 216 - 221. ISSN: 1359-6462 Open Access Link

Silva, JPB., Silva, JMB., Sekhar, KC., Palneedi, H., Istrate, MC., Negrea, RF., Ghica, C., Chahboun, A., Pereira, M. and Gomes, MJM. et al. (2020) 'Energy storage performance of ferroelectric ZrO₂film capacitors: effect of HfO₂:Al₂O₃dielectric insert layer'. Journal of Materials Chemistry A, 8 (28). pp. 14171 - 14177. ISSN: 2050-7488

Subroto, T., Eskin, DG., Beckwith, C., Skalicky, I., Roberts, D., Tzanakis, I. and Pericleous, K. et al. (2020) 'Structure refinement upon ultrasonic melt treatment in a DC-casting launder'. JOM Journal of the Minerals, Metals and Materials Society, 72 (11). pp. 4071 - 4081. ISSN: 1047-4838 Open Access Link

Huo, W., Sun, T., Hou, L., Zhang, W., Zhang, Y. and Zhang, J. (2020) 'Effect of heating rate during solution treatment on microstructure, mechanical property and corrosion resistance of high-strength AA 7075 alloy'. Materials Characterization, 167. pp. 110535 - 110535. ISSN: 1044-5803

Seraj, RA., Abdollah-Zadeh, A., Assadi, H., Hajipour, H. and Kadkhodaee, M. (2020) 'Effect of substrate on the properties of cold sprayed coating of WC-10Ni'. Advances in Materials and Processing Technologies, 8 (1). pp. 108 - 121. ISSN: 2374-068X

Wang, W., Guo, E., Phillion, AB., Eskin, DG., Wang, T. and Lee, PD. (2020) 'Semi-solid Compression of Nano/Micro-Particle Reinforced Al-Cu Composites: An In Situ Synchrotron Tomographic Study'. Materialia, 12. pp. 1 - 8. ISSN: 2589-1529 Open Access Link

Khan, MA., Wang, Y., Yasin, G., Nazeer, F., Malik, A., Khan, WQ., Ahmad, T., Zhang, H. and Afifi, MA. et al. (2020) 'The effect of strain rates on the microstructure and the mechanical properties of an over-aged Al-Zn-Mg-Cu alloy'. Materials Characterization, 167. pp. 1 - 12. ISSN: 1044-5803

Tyurnina, A., Tzanakis, I., Morton, J., Mi, J., Porfyrakis, K., Maciejewska, BM., Grobert, N. and Eskin, DG. et al. (2020) 'Ultrasonic exfoliation of graphene in water: A key parameter study'. Carbon, 168. pp. 737 - 747. ISSN: 0008-6223 Open Access Link

Chang, I., Mendis, C., Zhongyun, F. and Qing, C. (2020) 'Effect of short T6 heat treatment on the microstructure and the mechanical properties of newly developed die-cast Al–Si–Mg–Mn alloys'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 788. pp. 139610 - 139610. ISSN: 0921-5093

Hamouda, W., Lubin, C., Ueda, S., Yamashita, Y., Renault, O., Mehmood, F., Mikolajick, T., Schroeder, U., Negrea, R. and Barrett, N. et al. (2020) 'Interface chemistry of pristine TiN/La:Hf0.5Zr0.5O2 capacitors'. Applied Physics Letters, 116 (25). ISSN: 0003-6951

Al-Helal, K., Patel, J., Scamans, G. and Fan, Z. (2020) 'Melt conditioned direct chill (MC - DC) casting and extrusion of AA5754 Aluminium alloy formulated from recycled Taint Tabor scrap'. Materials, 13 (12). pp. 1 - 17. ISSN: 1996-1944 Open Access Link

Fan, Z., Gao, F., Jiang, B. and Que, Z. (2020) 'Impeding Nucleation for More Significant Grain Refinement'. Scientific Reports, 10 (1). pp. 1 - 11. ISSN: 2045-2322 Open Access Link

Nikhbakht, R., Saadati, M., Jahazi, M., Assadi, H. and Jodoin, B. (2020) 'EBSD Analysis Enhancement of Cold Sprayed Composite Materials: Sample Preparation , Annealing, and Scan Optimization'. [Poster] Exhibited at. Microscopical Society Symposium of Canada 2 6 2020

Chankitmunkong, S., Eskin, DG. and Limmaneevichitr, C. (2020) 'Structure refinement, mechanical properties and feasibility of deformation of hypereutectic Al-Fe-Zr and Al-Ni-Zr alloys subjected to ultrasonic melt processing'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 788. pp. 1 - 13. ISSN: 0921-5093 Open Access Link

Zhang, Y., Lordan, E., Dou, K., Wang, S. and Fan, Z. (2020) 'Influence of porosity characteristics on the variability in mechanical properties of high pressure die casting (HPDC) AlSi7MgMn alloys'. Journal of Manufacturing Processes, 56 (Part A). pp. 500 - 509. ISSN: 1526-6125 Open Access Link

Zhang, K., Zheng, J-H., Huang, Y., Pruncu, C. and Jiang, J. (2020) 'Evolution of twinning and shear bands in magnesium alloys during rolling at room and cryogenic temperature'. Materials and Design, 193 (August 2020). pp. 1 - 11. ISSN: 0264-1275 Open Access Link

Assadi, H. and Gärtner, F. (2020) 'Particle Compression Test: A Key Step towards Tailoring of Feedstock Powder for Cold Spraying'. Coatings, 10 (5). pp. 1 - 11.Open Access Link

Que, Z. and Mendis, CL. (2020) 'Heterogeneous nucleation and phase transformation of Fe-rich intermetallic compounds in Al–Mg–Si alloys'. Journal of Alloys and Compounds, 836. pp. 1 - 12. ISSN: 0925-8388 Open Access Link

Fang, C. and Fan, Z. (2020) 'Atomic ordering at the interfaces between liquid Al and solid MgO: An Ab Initio molecular dynamics study'. Philosophical Magazine Letters, 100 (5). pp. 235 - 244. ISSN: 0950-0839

Zuo, J., Hou, L., Shu, X., Peng, W., Yin, A. and Zhang, J. (2020) 'Grain Refinement Assisted by Deformation Enhanced Precipitates through Thermomechanical Treatment of AA7055 Al Alloy'. Metals, 10 (5). pp. 594 - 594.

Dhruv, PN., Meena, SS., Pullar, RC., Carvalho, FE., Jotania, RB., Bhatt, P., Prajapat, CL., Barros Machado, JP., Rao, TVC. and Basak, CB. et al. (2020) 'Investigation of structural, magnetic and dielectric properties of gallium substituted Z-type Sr3Co2-Ga Fe24O41 hexaferrites for microwave absorbers'. Journal of Alloys and Compounds, 822. pp. 153470 - 153470. ISSN: 0925-8388

Chang, I., Luo, D., Al-Helal, K., Patel, JB., Huang, Y., Scamans, G. and Fan, Z. et al. (2020) 'Processing of recycled AA6111 aluminium alloy from two different feedstock of aluminium metal scraps'. Keikinzoku Yosetsu/Journal of Light Metal Welding, 58. pp. 29 - 32. ISSN: 0368-5306 Open Access Link

Silva Campos, MDR., Blawert, C., Mendis, CL., Mohedano, M., Zimmermann, T., Proefrock, D., Zheludkevich, ML. and Kainer, KU. et al. (2020) 'Effect of Heat Treatment on the Corrosion Behavior of Mg-10Gd Alloy in 0.5% NaCl Solution'. Frontiers in Materials, 7. ISSN: 2296-8016

Wang, S., Wang, Y., Ramasse, Q. and Fan, Z. (2020) 'The Nature of Native MgO in Mg and Its Alloys'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (6). pp. 2957 - 2974. ISSN: 1073-5623 Open Access Link

Gupta, T., Chauhan, CC., Kagdi, AR., Meena, SS., Jotania, RB., Singh, C. and Basak, CB. et al. (2020) 'Investigation on structural, hysteresis, Mössbauer properties and electrical parameters of lightly Erbium substituted X-type Ba2Co2ErxFe28-xO46 hexaferrites'. Ceramics International, 46 (6). pp. 8209 - 8226. ISSN: 0272-8842

Que, Z., Wang, Y. and Fan, Z. (2020) 'Heterogeneous Nucleation of Eutectic Structure in Al-Mg-Si Alloys'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (6). pp. 2697 - 2702. ISSN: 1073-5623 Open Access Link

Talluri, VSSLP., Tleuova, A., Hosseini, S. and Vopicka, O. (2020) 'Selective separation of 1-butanol from aqueous solution through pervaporation using PTSMP-silica nano hybrid membrane'. Membranes, 10 (4). pp. 1 - 15. ISSN: 2077-0375 Open Access Link

Afifi, MA., Wang, YC. and Langdon, TG. (2020) 'Effect of dynamic plastic deformation on the microstructure and mechanical properties of an Al–Zn–Mg alloy'. Materials Science and Engineering A, 784. pp. 1 - x. ISSN: 0921-5093 Open Access Link

Saeedipour, S., Kermanpur, A. and Sadeghi, F. (2020) 'Effect of N addition on microstructure refinement and high temperature mechanical properties of Ti–46Al–8Ta (at. %) intermetallic alloy'. Journal of Alloys and Compounds, 817. pp. 152749 - 152749. ISSN: 0925-8388

Zeng, G., Shuai, SS., Zhu, XZ., Ji, SX., Xian, JW. and Gourlay, CM. (2020) 'Al8Mn5 in High-Pressure Die Cast AZ91: Twinning, Morphology and Size Distributions'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (5). pp. 2523 - 2535. ISSN: 1073-5623 Open Access Link

Fang, C., Mohammodi, V., Nihtianov, S. and Sluiter, M. (2020) 'Stability, geometry and electronic properties of BH_n (n = 0 to 3) radicals on the Si{0 0 1}3×1:H surface from first-principles'. Journal of Physics: Condensed Matter, 32 (23). pp. 1 - 10. ISSN: 0953-8984 Open Access Link

Uka, J., Minton, T., McKay, B., Lewis, R. and Anguilano, L. (2020) 'Methods to Re-Use and Recycle Aluminium Machining Swarf'. Evolutions in Mechanical Engineering, 3 (2). pp. 1 - 4. ISSN: 2640-9690 Open Access Link

Rezvani, A., Bagherpour, E. and Ebrahimi, R. (2020) 'Circular Simple Shear Extrusion as an Alternative to Simple Shear Extrusion Technique'. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 44 (1). pp. 193 - 201. ISSN: 2228-6187

Souissi, M., Sluiter, MHF., Matsunaga, T., Tabuchi, M., Mills, MJ. and Sahara, R. (2020) 'Direct observation and modeling of growth-induced stacking fault in chromium-rich γ-M23C6 carbides'. Scripta Materialia, 178. pp. 290 - 294. ISSN: 1359-6462

Zhou, M., Cardoso, RP., Bahai, H. and Usmani, A. (2020) 'A thermo-mechanical analysis of stainless steel structures in fire'. Engineering Structures, 210 (1). pp. 1 - 19. ISSN: 0141-0296 Open Access Link

Subroto, T., Eskin, DG., Beckwith, C., Tzanakis, I., Djambazov, G. and Pericleous, K. (2020) 'Improving Ultrasonic Melt Treatment Efficiency Through Flow Management: Acoustic Pressure Measurements and Numerical Simulations'.149th TMS Annual Meeting and Exhibition: Light Metals 2020 Symposium. San Diego, CA, USA. 23 - 27 February. Springer International Publishing. pp. 981 - 987. ISSN: 2367-1181

Venditti, S., Eskin, D. and Jacot, A. (2020) 'Fractional Solidification for Purification of Recycled Aluminium Alloys'.149th TMS Annual Meeting and Exhibition: Light Metals Symposium 2020. San Diego, CA, USA. 23 - 27 February. Springer International Publishing. pp. 1110 - 1118. ISSN: 2367-1181