Sharma, K., Kedia, S., Singh, AK., Basak, CB., Chauhan, AK., Basu, S. and Sinha, S. et al. (2016) 'Morphology and structural studies of laser treated 45S5 bioactive glass'. Journal of Non Crystalline Solids, 440. pp. 43 - 48. ISSN: 0022-3093

Scarisoreanu, ND., Craciun, F., Birjega, R., Ion, V., Teodorescu, VS., Ghica, C., Negrea, R. and Dinescu, M. et al. (2016) 'Joining Chemical Pressure and Epitaxial Strain to Yield Y-doped BiFeO 3 Thin Films with High Dielectric Response'. Scientific Reports, 6 (1). pp. 25535. ISSN: 2045-2322

Hosseini, SM., Habibolahzadeh, A., Petráňová, V. and Němeček, J. (2016) 'Influence of nano-SiCp on the foamability and microstructure of Al/TiH2 foam sheet manufactured by continual annealing and roll-bonding process'. Materials and Design, 97. pp. 483 - 491. ISSN: 0264-1275

Bolzoni, L. and Nadendla, HB. (2016) 'Heterogeneous Nb-Based Nuclei for the Grain Refinement of Al-Si Alloys'. JOM, 68 (5). pp. 1301 - 1306. ISSN: 1047-4838 Open Access Link

Lu, L., Hou, LG., Cui, H., Huang, JF., Zhang, YA. and Zhang, JS. (2016) 'Hot Deformation Behavior and Processing Map of Spray Formed M3: 2 High Speed Steel'. Journal of Iron and Steel Research International, 23 (5). pp. 501 - 508. ISSN: 1006-706X

Bolzoni, L., Nowak, M. and Nadendla, H. (2016) 'Nb-based heterogeneous nuclei for enhanced α-Mg nucleation in Mg(-Al) alloys'. Materials Letters, 169. pp. 207 - 209. ISSN: 1873-4979 Open Access Link

Maier, P., Peters, R., Mendis, CL., Müller, S. and Hort, N. (2016) 'Influence of Precipitation Hardening in Mg-Y-Nd on Mechanical and Corrosion Properties'. JOM, 68 (4). pp. 1183 - 1190. ISSN: 1047-4838

Sunil, S., Verdhan, N., Kapoor, R., Basak, CB., Singh, RN. and Chakravartty, JK. (2016) 'Effect of orientation and presence of hydride on the fatigue crack growth behavior of Zr-2.5 wt% Nb'. International Journal of Fatigue, 85. pp. 49 - 56. ISSN: 0142-1123

Fan, Z. and Lu, SZ. (2016) 'A simple model for spherical growth in alloy solidification'. IOP Publishing. pp. 012016 - 012016. ISSN: 1757-8981

Fan, PZ. and Stone, IC. (2016) 'Preface'. IOP Publishing. pp. 011001 - 011001. ISSN: 1757-8981

Zhang, Y. and Ma, N. (2016) 'The critical effect of Fe on the grain refinement of aluminium via Al-5Ti-1B addition'. Iop Conference Series Materials Science and Engineering, 117 (1). pp. 012005 - 012005. ISSN: 1757-8981

Huang, Y. (2016) 'Solute effect on grain boundary migration in ultrafine/nanostructured materials'.International conference and exhibition on materials chemistry. Valencia, Spain. 31 - 1 April.

Wang, Q., Callisti, M., Greer, J., McKay, B., Milickovic, TK., Zoikis-Karathanasis, A., Deligkiozi, I. and Polcar, T. et al. (2016) 'Effect of annealing temperature on microstructure, mechanical and tribological properties of nano-SiC reinforced Ni-P coatings'. WEAR, 356-357. pp. 86 - 93. ISSN: 0043-1648

Biswas, P., Sen, D., Mazumder, S., Basak, CB. and Doshi, P. (2016) 'Temperature Mediated Morphological Transition during Drying of Spray Colloidal Droplets'. Langmuir, 32 (10). pp. 2464 - 2473. ISSN: 0743-7463

Yu, Z., Huang, Y., Gan, W., Mendis, CL., Zhong, Z., Brokmeier, HG., Hort, N. and Meng, J. et al. (2016) 'Microstructure evolution of Mg-11Gd-4.5Y-1Nd-1.5Zn-0.5Zr (wt%) alloy during deformation and its effect on strengthening'. Materials Science and Engineering A, 657. pp. 259 - 268. ISSN: 0921-5093 Open Access Link

Ma, C., Hou, L., Zhang, J. and Zhuang, L. (2016) 'Microstructures and properties of asymmetrical rolled 7050 Al alloy plate with bending behavior optimization'. Materials Science and Engineering A, 657. pp. 322 - 330. ISSN: 0921-5093

Shu, WX., Hou, LG., Zhang, C., Zhang, F., Liu, JC., Liu, JT., Zhuang, LZ. and Zhang, JS. et al. (2016) 'Tailored Mg and Cu contents affecting the microstructures and mechanical properties of high-strength Al-Zn-Mg-Cu alloys'. Materials Science and Engineering A, 657. pp. 269 - 283. ISSN: 0921-5093

Wang, EQ., Wang, G., Dargusch, MS., Qian, M., Eskin, DG. and StJohn, DH. (2016) 'Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment'. IOP Conference Series: Materials Science and Engineering, 117 (1). pp. 012050 - 012050. ISSN: 1757-8981 Open Access Link

Ji, S., Gao, F. and Fan, Z. (2016) 'Thermodynamics Calculation of Extra Mn Addition in the Recycling of Al-Si-Cu Aluminium Alloys'.ICAA 15. ChongQing, China. 29 - 16 June. Trans Tech Publications, Ltd.. pp. 33 - 38. ISSN: 0255-5476 Open Access Link

Liu, S., Zhou, X., Wu, W., Zhu, X., Duan, Y., Li, H. and Wang, X. et al. (2016) 'Molecular dynamics study on the nucleation of Al-Si melts on sheet substrates at the nanoscale'. Nanoscale, 8 (8). pp. 4520 - 4528. ISSN: 2040-3364

Niu, Z. and Cheng, K. (2016) 'Multiscale Multiphysics-Based Modeling and Analysis on the Tool Wear in Micro Drilling'. Journal of Multiscale Modelling, 07 (01). pp. 1 - 22. ISSN: 1756-9737

Lebon, GSB., Tzanakis, I., Pericleous, K. and Eskin, D. (2016) 'A High-order acoustic cavitation model for the treatment of a moving liquid metal volume'.CFD Modeling and Simulation in Materials Processing. Nasville, USA. 14 - 18 February. Wiley. pp. 135 - 142.

Tzanakis, I., Lebon, GSB., Eskin, DG. and Pericleous, K. (2016) 'Optimization of the ultrasonic processing in a melt flow'.Cast Shop Technology for Aluminum Production at TMS Annual Meeting. Nasville, USA. 14 - 18 February. Wiley. pp. 833 - 836. ISSN: 0147-0809 Open Access Link

Schmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, CL., Tolnai, D., Kainer, KU. and Hort, N. et al. (2016) 'Thermodynamic description of reactions between Mg and CaO'.TMS annual meeting 2016. Orlando Florida USA. 14 - 18 February. Wiley. pp. 67 - 72. ISSN: 1545-4150 Open Access Link

Ji, S., Yang, F. and Fan, Z. (2016) 'A high strength aluminium alloy for high pressure die casting'.TMS 2016. Nashville, Tennessee. 10 - 18 February. TMS USA. pp. 207 - 210. ISSN: 0147-0809 Open Access Link

Lebon, GSB., Tzanakis, I., Pericleous, K. and Eskin, D. (2016) 'A High‐Order Acoustic Cavitation Model for the Treatment of A Moving Liquid Metal Volume', in Wiley. pp. 133 - 142. ISBN 13: 9781119225768.

Al-Helal, K., Stone, I. and Fan, Z. (2016) 'Refinement of Primary Silicon Crystals by Novel Al-ZnS Master Alloy in Solidification of Hypereutectic Al-Si Alloys', in Williams, E. (ed.) Light Metals 2016. Wiley. pp. 271 - 273. ISBN 13: 9781119274780. Open Access Link

Wang, Y., Zhou, L. and Fan, Z. (2016) 'Mechanism of Zirconium Poisoning Effect on TiB2 Inoculation in Aluminium Alloys', in Williams, E. (ed.) Light Metals 2016. Wiley. pp. 725 - 729. ISBN 13: 9781119225799.

Nadendla, H. and Joshi, U. (Accepted) 'Grain refiner for Magnesium alloys'.

McKay, BJ., Schumacher, P., Eck, S. and Ludwig, A. (Accepted) 'International Journal of Cast Metals Research'. Maney Publishing.

McKay, BJ., Cizek, P. and Schumacher, P. (Accepted) 'Nucleation mechanisms of TiBAl additions in Al-Ni-Si alloys', in Tms. pp. 833 - 838.

Cizek, P., McKay, BJ. and Schumacher, P. (Accepted) 'Study of Heterogeneous Nucleation of α-Al on Grain Refiner Particles in during Rapid Solidification', in Wiley-VCH Verlag GmbH. pp. 251 - 256.

Holroyd, NJH. and Scamans, GM. (2016) 'Editorial: Sensitization, intergranular corrosion, and environment-induced cracking of aluminum-magnesium alloys'. Corrosion, 72 (2). pp. 135. ISSN: 0010-9312

Burugapalli, K., Razavi, M., Zhou, L. and Huang, Y. (2016) 'In Vitro Cytocompatibility Study of a Medical beta -Type Ti-35.5Nb-5.7Ta Titanium Alloy'. Journal of Biomaterials and Tissue Engineering, 6 (2). pp. 141 - 148. ISSN: 2157-9091 Open Access Link

Ingale, SV., Wagh, PB., Sastry, PU., Basak, CB., Bandyopadhyay, D., Phapale, SB. and Gupta, SC. et al. (2016) 'Studies on impact sensitivity of nanosized trinitrotoluene (TNT) confined in silica processed by sol-gel method'. Defence Technology, 12 (1). pp. 46 - 51. ISSN: 2214-9147

Kang, B., Feng, Q., Summers, C., Fang, CM., Adhikari, R. and Biswas, K. (2016) 'Emerging New Pseudobinary and Ternary Halides as Scintillators for Radiation Detection'. IEEE Transactions on Nuclear Science, 64 (7). pp. 1817 - 1824. ISSN: 0018-9499 Open Access Link

Holroyd, H. and Scamans, GM. (2016) 'Sensitization, Intergranular Corrosion, and Environment-Induced Cracking of Aluminum-Magnesium Alloys'. CORROSION, 72 (2). pp. 135 - 135. ISSN: 0010-9312

Eskin, D., Wang, F., Connolley, T. and Mi, J. (2016) 'Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al-0.4Ti alloy'. Journal of Crystal Growth, 435. pp. 24 - 30. ISSN: 1873-5002 Open Access Link

Tzanakis, I., Lebon, GSB., Eskin, D. and Pericleous, K. (2016) 'Investigation of the factors influencing cavitation intensity during the ultrasonic treatment of molten aluminium'. MATERIALS & DESIGN, 90. pp. 979 - 983. ISSN: 0261-3069 Open Access Link

Mirihanage, W., Xu, W., Tamayo-Ariztondo, J., Eskin, D., Garcia-Fernandez, M., Srirangam, P. and Lee, P. et al. (2016) 'Synchrotron radiographic studies of ultrasonic melt processing of metal matrix nano composites'. Materials Letters, 164. pp. 484 - 487. ISSN: 0167-577X Open Access Link

Nadendla, H. (2016) 'A trapped magnetic field of 3T in homogeneous, bulk MgB2 superconductors fabricated by a Modified Precursor Infiltration and Growth (MPIG) process'. Superconductor Science and Technology, 29 (3). pp. 035008 - 035008. ISSN: 1361-6668 Open Access Link

Leese, RJ., Ivanov, A. and Babu-Nadendla, H. (2016) 'The Potential to Machine Superconductors with Electrochemical Machining'. Journal of Multiscale Modelling, 07 (01). pp. 1640001 - 1640001. ISSN: 1756-9737

Fang, CM. and Biswas, K. (2016) 'Quaternary Iodides A(BaSr)I 5 :Eu 2+ (A = K, Cs) as Scintillators for Radiation Detection'. The Journal of Physical Chemistry C, 120 (2). pp. 1225 - 1236. ISSN: 1932-7447

Tzanakis, I., Hodnett, M., Lebon, GSB., Dezhkunov, N. and Eskin, DG. (2016) 'Calibration and performance assessment of an innovative high-temperature cavitometer'. Sensors and Actuators, A: Physical, 240 (1 April 2016). pp. 57 - 69. ISSN: 0924-4247 Open Access Link

Lu, L., Hou, LG., Zhang, JX., Wang, HB., Cui, H., Huang, JF., Zhang, YA. and Zhang, JS. et al. (2016) 'Microstructure characteristics of spray-formed high speed steel and its evolution during subsequent hot deformation'. Journal of Materials Research, 31 (2). pp. 274 - 280. ISSN: 0884-2914

Tzanakis, I., Lebon, GSB., Eskin, D. and Pericleous, KA. (2016) 'Characterisation of the ultrasonic acoustic spectrum and pressure field in aluminium melt with an advanced cavitometer'. Journal of Materials Processing Technology, 229. pp. 582 - 586. ISSN: 1873-4774 Open Access Link

Razavi, M., Burugapalli, K., Zhou, L. and Huang, Y. (2016) 'Human embryonic kidney cell behaviour on a new β-type titanium alloy by Alamar Blue assay'.Annual Conference and Expo on Biomaterials. Crowne Plaza London-Heathrow, London, UK.

D'Elia, F., Tolnai, D., Mendis, CL. and Hort, N. (2016) 'Hot tearing susceptibility of Mg-5Nd-xZn alloys'.TMS annaual Meeting. Orlando Florida USA. 1 - 18 February. Wiley. pp. 129 - 134. ISSN: 1545-4150 Open Access Link

Szakács, G., Mendis, CL., Tolnai, D., Vlcek, M., Lukác, F., Stulíková, I., Smola, B., Wolff, M., Schmid-Fetzer, R., Schell, N., Kainer, KU. and Hort, N. et al. (2016) 'As solidified microstructure investigation of Mg15Y and MgxYyGd (x+y=15 wt.%) ternary alloys'.Magnesium Technology Symposium held during the 145th TMS Annual Meeting and Exhibition. Nashville, TN. 1 - 18 February. Springer International Publishing. pp. 23 - 27. ISSN: 1545-4150

Srinivasan, A., Dieringa, H., Mendis, CL., Huang, Y., Rajesh Kumar, R., Kainer, KU. and Hort, N. et al. (2016) 'Creep behavior of Mg-10Gd-xZn (x=2 and 6wt%) alloys'. Materials Science and Engineering A, 649. pp. 158 - 167. ISSN: 0921-5093

Niu, Z. and Cheng, K. (2016) 'Multiphysics based modelling and analysis of micro milling metal matrix composites (MMCs) against the effects of key process variables'. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology Euspen 2016.