Eskin, DG. (1997) 'Structure and properties of deformed hypereutectic aluminium alloys'.5th European conference on advanced materials and processes and applications, EUROMAT'97. Maastricht. 21 - 23 April. Netherlands Society for Materials science. pp. 291 - 294.

Huang, Y. (1997) 'Analysis of EBSD spatial and angular resolution'.RMS EBSD Symposium 1997. Oxford, UK. 2 - 2 April. [unpublished]

Fan, Z. (1997) 'High temperature creep resistance of metal matrix composites'. Materials Science and Technology, 13 (4). pp. 327 - 330. ISSN: 0267-0836

Ji, S., Wan, L. and Yang, G. (1997) 'The design and development of sensors for measuring the pressure in dry sand mould (in Chinese)'. Te Zhong Zhu Zao Ji You Se He Jin/Journal of Special Casting & Nonferrous Alloys, 1997 (2). pp. 6 - 10. ISSN: 1001-2249

Fan, Z., Niu, HJ., Cantor, B., Miodownik, AP. and Saito, T. (1997) 'Effect of Cl on microstructure and mechanical properties of in situ Ti/TiB MMCs produced by a blended elemental powder metallurgy method'.Meeting of Microscopy of Composite Materials III. ST JOHNS COLLEGE, OXFORD, ENGLAND. 1 - 3 April. BLACKWELL SCIENCE LTD. pp. 157 - 167. ISSN: 0022-2720

Assadi, H. and Greer, AL. (1997) 'The interfacial undercooling in solidification'. Journal of Crystal Growth, 172 (1-2). pp. 249 - 258. ISSN: 0022-0248

Jacot, A. and Rappaz, M. (1997) 'A two-dimensional diffusion model for the prediction of phase transformations: Application to austenitization and homogenization of hypoeutectoid Fe-C steels'. Acta Materialia, 45 (2). pp. 575 - 585. ISSN: 1359-6454

Fan, ZY. (1997) 'A Microstructural Approach to the Effective Transport Properties of MMCs and CMCs'. Key Engineering Materials, 127-131 (Pt 2). pp. 1207 - 1214. ISSN: 1013-9826

Enayati, MH., Chang, ITH., Schumacher, P. and Cantor, B. (1997) 'Mechanical alloying of Ni-Nb alloys'. Materials Science Forum, 235-238 (PART 1). pp. 85 - 90. ISSN: 0255-5476

Fan, ZY., Grant, PS. and Cantor, B. (1997) 'Manufacture of Hoop Reinforced Ti-MMC Rings by Spray/Wind Process'. Key Engineering Materials, 127-131. pp. 335 - 342. ISSN: 1013-9826

Fan, ZY., Niu, HJ., Miodownik, AP., Saito, T. and Cantor, B. (1997) 'Microstructure and Mechanical Properties of in Situ Ti/TiB MMCs Produced by a Blended Elemental Powder Metallurgy Method'. Key Engineering Materials, 127-131. pp. 423 - 430. ISSN: 1013-9826

Boccaccini, AR. and Fan, Z. (1997) 'A new approach for the Young's modulus-porosity correlation of ceramic materials'. Ceramics International, 23 (3). pp. 239 - 245. ISSN: 0272-8842

Fang, CM., de Groot, RA. and Haas, C. (1997) 'Bulk and surface electronic structure of1T−TiS2and1T−TiSe2'. Physical Review B, 56 (8). pp. 4455 - 4463. ISSN: 0163-1829

Huang, Y. and Humphreys, FJ. (1997) 'Transient dynamic recrystallization in aluminium subjected to large reductions in strain rate'.2nd International Conference on Thermomechanical Processing of Steels and Other Materials (THERMEC 97). UNIV WOLLONGONG, WOLLONGONG, AUSTRALIA. 1 - 11 July. MINERALS, METALS & MATERIALS SOC. pp. 987 - 993.

Eskin, D., Pimenov, YP. and Kharakterova, ML. (1997) 'Structure and phase composition of hypereutectic silumins intended for deformation'. Rossiiskaya Akademiya Nauk. Izvestiya. Metalls. pp. 91 - 98. ISSN: 0568-5303

Kharakterova, ML., Eskin, DG. and Rokhlin, LL. (1997) 'Influence of scandium and zirconium on structure and hardening of Al-Mg-Si alloys in ageing'. Russian Academy of Sciences. Izvestiya. Metals. pp. 123 - 128. ISSN: 0568-5303

Fan, Z., Guo, ZX. and Cantor, B. (1997) 'The kinetics and mechanism of interfacial reaction in sigma fibre-reinforced Ti MMCs'. Composites Part A: Applied Science and Manufacturing, 28 (2). pp. 131 - 140. ISSN: 1359-835X

Ji, S., Li, Z., Wan, L., Deng, J. and Yang, G. (1996) 'A CAD Software for Diecasting Gate System Based on 3D Solid Modelling (in Chinese)'. China Foundry Machinery and Technology, 1996 (6). pp. 47 - 51.

Li, Z., Wei, H., Ji, S. and Yang, G. (1996) 'DCDDI software -- Study of die-casting gating CAD system (in Chinese)'. Te Zhong Zhu Zao Ji You Se He Jin/Journal of Special Casting & Nonferrous Alloys, 1996 (6). pp. 21 - 26. ISSN: 1001-2249

Boccaccini, AR. and Fan, Z. (1996) 'Comment on “Simple Mathematical Model for the Electrical Conductivity of Highly Porous Ceramics”'. Journal of the American Ceramic Society, 79 (11). pp. 2997 - 2998. ISSN: 0002-7820

Ji, S., Zhang, J. and Wan, L. (1996) 'Development of compacting equipment for lost foam process (in Chinese)'. Foundry, 1996 (10). pp. 25 - 28. ISSN: 1001-4977

Assadi, H. and Greer, AL. (1996) 'Site-ordering effects on element partitioning during rapid solidification of alloys'. Nature, 383 (6596). pp. 150 - 152. ISSN: 0028-0836

Stone, IC. and Jones, H. (1996) 'Effect of cooling rate and front velocity on solidification microstructure selection in Al-3.5wt.%Fe-0 to 8.5wt.%Si alloys'. Materials Science and Engineering A, 226-228. pp. 33 - 37. ISSN: 0921-5093

Fang, CM., Wiegers, GA., Meetsma, A., de Groot, RA. and Haas, C. (1996) 'Crystal structure and band structure calculations of and'. Physica B: Condensed Matter, 226 (4). pp. 259 - 267. ISSN: 0921-4526

Fang, CM., Smaalen, SV., Wiegers, GA., Haas, C. and Groot, RAD. (1996) 'Electronic structure of the misfit layer compound : band-structure calculations and photoelectron spectra'. Journal of Physics: Condensed Matter, 8 (29). pp. 5367 - 5382. ISSN: 0953-8984

Fang, CM., Tolsma, PR., Bruggen, CFV., Groot, RAD., Wiegers, GA. and Haas, C. (1996) 'Electronic structure and magnetic properties of'. Journal of Physics: Condensed Matter, 8 (24). pp. 4381 - 4388. ISSN: 0953-8984

Fan, Z. (1996) 'A microstructural approach to the effective transport properties of multiphase composites'. Philosophical Magazine A, 73 (6). pp. 1663 - 1684. ISSN: 0141-8610

Fan, Z. and Boccaccini, AR. (1996) 'A new approach to the effective viscosity of suspensions'. Journal of Materials Science, 31 (10). pp. 2515 - 2521. ISSN: 0022-2461

Huang, Y. (1996) 'In-situ measurement of grain boundary mobility during recrystallization in an Al-0.05Si single-phase alloy by EBSD'.RMS EBSD Workshop 1996. Manchester, UK. 24 - 24 April. [unpublished]

Huang, Y. (1996) 'A novel surface treatment method for diffusion bonding of aluminium alloys'.IOM Workshop for Superplastic Forming and Diffusion Bonding. Leedsd, UK. 26 - 26 March. [unpublished]

Fang, CM., Groot, RAD., Wiegers, GA. and Haas, C. (1996) 'Electronic structure of the misfit layer compound : band structure calculations and photoelectron spectra'. Journal of Physics: Condensed Matter, 8 (11). pp. 1663 - 1676. ISSN: 0953-8984

Li, Z., Ji, S., Yang, G. and Wei, H. (1996) 'Application and Research of Die Casting Die CAD/CAM Technology (in Chinese)'. Special Casting and Nonferrous Alloys, 1996 (1). pp. 23 - 26. ISSN: 1001-2249

Assadi, H. and Greer, AL. (1996) 'Development of microstructure in rapidly solidified intermetallics'.Symposium C on Thermodynamics and Kinetics of Phase Transformations, at the 1995 MRS Fall Meeting. BOSTON, MA. 1 - 1 December. MATERIALS RESEARCH SOC. pp. 75 - 80. ISSN: 0272-9172

Chang, ITH., Svec, P., Gogebakan, M. and Cantor, B. (1996) 'Rapidly solidified Al85Ni15-xYx(x=5,8,10) alloys'. Materials Science Forum, 225-227 (PART 1). pp. 335 - 340. ISSN: 0255-5476

Chang, ITH., Niu, F., Slimovici, D., Wildig, C., Leigh, PA., Dobson, PJ. and Cantor, B. et al. (1996) 'Manufacture and characterization of nanocomposite thin films of Si-SiO2 and Ag-Si'. Materials Science Forum, 225-227 (PART 1). pp. 175 - 178. ISSN: 0255-5476

Fan, Z. and Miodownik, AP. (1996) 'Microstructural evolution in rapidly solidified Ti-7.5 Mn-0.5 B alloy'. Acta Materialia, 44 (1). pp. 93 - 110. ISSN: 1359-6454

Rappaz, M., Doré, X., Gandin, C-A., Jacot, A. and Jalanti, T. (1996) 'Modelling of As-Cast Structures'. Materials Science Forum, 217-222 (PART 1). pp. 7 - 18. ISSN: 0255-5476

Jacot, A., Swierkosz, M., Rappaz, J., Rappaz, M. and Mari, D. (1996) 'Modelling of Electromagnetic Heating, Cooling and Phase Transformations during Surface Hardening of Steels'. Le Journal de Physique IV, 06 (C1). pp. C1 - C1. ISSN: 1155-4339

Gartner, F., Norman, AF., Assadi, H. and Greer, AL. (1996) 'Competitive phase selection in Fe-Ni alloy droplets'.Symposium C on Thermodynamics and Kinetics of Phase Transformations, at the 1995 MRS Fall Meeting. BOSTON, MA. 1 - 1 December. MATERIALS RESEARCH SOC. pp. 51 - 56. ISSN: 0272-9172

Assadi, H. and Greer, AL. (1996) 'Solidification of intermetallic compounds'.Symposium on Metastable Phases and Microstructures. BOSTON, MA. 1 - 30 November. MATERIALS RESEARCH SOC. pp. 173 - 184. ISSN: 0272-9172

Assadi, H., Barth, M., Greer, AL. and Herlach, DM. (1996) 'Microstructural Development in Undercooled and Quenched Ni₃Al Droplets'. Materials Science Forum, 215-216. pp. 37 - 44. ISSN: 0255-5476

Huang, Y. and Young, RJ. (1996) 'Interfacial micromechanics in thermoplastic and thermosetting matrix carbon fibre composites'. Composites Part A: Applied Science and Manufacturing, 27 (10). pp. 973 - 980. ISSN: 1359-835X

Eskin, DG. (1996) 'Effect of melt overheating on primary solidification in aluminium alloys'. Zeitschrift fuer Metallkunde, 87 (4). pp. 295 - 299. ISSN: 0044-3093

Rappaz, M., Desbiolles, JL., Drezet, JM., Gandin, CA., Jacot, A. and Thevoz, P. (1995) 'Application of inverse methods to the estimation of boundary conditions and properties'.7th Conference on Modeling of Casting, Welding and Advanced Solidification Processes. LONDON, ENGLAND. 1 - 15 September. MINERALS, METALS & MATERIALS SOC. pp. 449 - 457.

Rappaz, M., Gandin, CA., Jacot, A. and Charbon, C. (1995) 'Modeling of microstructure formation'.7th Conference on Modeling of Casting, Welding and Advanced Solidification Processes. LONDON, ENGLAND. 1 - 15 September. MINERALS, METALS & MATERIALS SOC. pp. 501 - 516.

Chang, ITH., Balcers, O. and Cantor, B. (1995) 'Effect of added Mo on the crystallization behaviour of rapidly solidified Fe70Cr20B10 alloys'. International Journal of Rapid Solidification, 9 (1). pp. 63 - 73. ISSN: 0265-0916

Chang, ITH. and Cantor, B. (1995) 'Temperature, composition and microstructure variations during pulsed laser irradiation of a deposited film on a substrate'. Acta Metallurgica et Materialia, 43 (12). pp. 4411 - 4420. ISSN: 0956-7151

Ji, S. (Accepted) 'Punching and glazing machine for semi-finished pottery'.

Huang, Y. and Young, RJ. (1995) 'Interfacial behaviour in high temperature cured carbon fibre/epoxy resin model composite'. Composites, 26 (8). pp. 541 - 550. ISSN: 0010-4361

FANG, CM., MEETSMA, A. and WIEGERS, GA. (1995) 'ChemInform Abstract: Crystal Structure of Erbium Sesquiselenide, Er2Se3.'. ChemInform, 26 (29). ISSN: 0931-7597

Ji, S. (Accepted) 'A height control valve for lost foam process'.Open Access Link