Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2018) 'Strain reversal in simple shear extrusion (SSE) processing: Microstructure investigations and mechanical properties'.6TH INTERNATIONAL BIENNIAL CONFERENCE ON ULTRAFINE GRAINED AND NANOSTRUCTURED MATERIALS: (UFGNSM2017). IRAN. 10 - 13 November. Author(s). ISSN: 0094-243X

Amirkhanlou, S. and Ji, S. (2018) 'Stiffness improvement through alloying elements in Al alloys'.Light Metals Symposium at the 147th Annual TMS Meeting and Exhibition. Phoenix, AZ. 1 - 15 March. Springer International Publishing. pp. 431 - 433. ISSN: 2367-1181

Chang, L., Liu, J., Yang, HL., Ruan, JM. and Ji, S. (2018) 'Effects of Zr contents on the microstructure, mechanical properties and biocompatibility of Ta-Zr alloys'. Trans Tech Publications, Ltd.. pp. 37 - 44. ISSN: 0255-5476

Karabay, S., Ertürk, AT., Zeren, M., Yamanoğlu, R. and Karakulak, E. (2018) 'Failure analysis of wire-breaks in aluminum conductor production and investigation of early failure reasons for transmission lines'. Engineering Failure Analysis, 83. pp. 47 - 56. ISSN: 1350-6307

Dahlborg, U., Calvo-Dahlborg, M., Eskin, DG. and Popel, PS. (2018) 'Thermal Melt Processing of Metallic Alloys', inSpringer Series in Materials Science. Springer International Publishing. , 273. pp. 277 - 315. ISBN 13: 9783319948416.

Eskin, DG. and Tzanakis, I. (2018) 'High-Frequency Vibration and Ultrasonic Processing', inSpringer Series in Materials Science. Springer International Publishing. , 273. pp. 153 - 193. ISBN 13: 9783319948416.

Eskin, DG. (2018) 'Basics of Solidification Processing of Metallic Alloys', inSpringer Series in Materials Science. Springer International Publishing. , 273. pp. 1 - 17. ISBN 13: 9783319948416.

Shurkin, PK., Dolbachev, AP., Naumova, EA. and Doroshenko, VV. (2018) 'Effect of iron on the structure, hardening and physical properties of the alloys of the Al - Zn - Mg - Ca system'. Tsvetnye Metally. pp. 69 - 77. ISSN: 0372-2929

Matsunaga, T., Souissi, M., Sahara, R., Hongo, H., Tabuchi, M., Zhang, W. and Mills, MJ. et al. (2018) 'Creep property of boron added 9cr heat resistant steels after welding'. Trans Tech Publications, Ltd.. pp. 340 - 345. ISSN: 0255-5476

Torfeh, M., Aghazadeh, J. and Nakhodchi, S. (2018) 'Evolution of temperature, microstructure and inter-granular stresses during directionally solidification process of a Ni-based superalloy'.ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers. ISSN: 0277-027X

Boni, GA., Filip, LD., Chirila, C., Pasuk, I., Negrea, R., Pintilie, I. and Pintilie, L. et al. (2017) 'Multiple polarization states in symmetric ferroelectric heterostructures for multi-bit non-volatile memories'. Nanoscale, 9 (48). pp. 19271 - 19278. ISSN: 2040-3364

Ji, S., Zhu, X. and Blake, P. (Accepted) 'AN ALUMINIUM ALLOY FOR HIGH PRESSURE DIE CASTING'.

Niu, Z., Jiao, F. and Cheng, K. (2017) 'An innovative investigation on chip formation mechanisms in micro-milling using natural diamond and tungsten carbide tools'. Journal of Manufacturing Processes, 31. pp. 382 - 394. ISSN: 1526-6125 Open Access Link

Wang, F., Eskin, D., Mi, J., Wang, C., Koe, B., King, A., Reinhard, C. and Connolley, T. et al. (2017) 'A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35Cu alloy induced by ultrasonic melt processing'. Acta Materialia, 141. pp. 142 - 153. ISSN: 1359-6454 Open Access Link

Ciobotaru, CC., Ciobotaru, IC., Schinteie, G., Negrea, R. and Polosan, S. (2017) 'Enhancement of the electroluminescence of organic light emitting devices based on Ir(ppy)3 by doping with metallic and magnetic nanoparticles'. Materials Science in Semiconductor Processing, 72. pp. 78 - 84. ISSN: 1369-8001

Wang, F., Eskin, D., Connolley, T., Wang, C., Koe, B., King, A., Reinhard, C. and Mi, J. et al. (2017) 'In-situ synchrotron X-ray radiography observation of primary Al2Cu intermetallic growth on fragments of aluminium oxide film'. Materials Letters, 213. pp. 303 - 305. ISSN: 0167-577X Open Access Link

Franconi, A. (2017) 'Metodi per la progettazione di prodotti circolari'.Fare ricerca in design. Venice.

Ji, S., Zhu, X. and Blake, P. (Accepted) 'Aluminium alloys for high pressure die casting'.

Wang, B., Tan, D., Lee, TL., Khong, JC., Wang, F., Eskin, D., Connolley, T., Fezzaa, K. and Mi, J. et al. (2017) 'Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound'. Acta Materialia, 144. pp. 505 - 515. ISSN: 1359-6454 Open Access Link

Ji, S., Xixi Dong. and Zhang, Y. (Accepted) 'High strength and ductility die cast aluminium alloy'.

Manoylov, A., Lebon, B., Djambazov, G. and Pericleous, K. (2017) 'Coupling of Acoustic Cavitation with Dem-Based Particle Solvers for Modeling De-agglomeration of Particle Clusters in Liquid Metals'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48 (11). pp. 5616 - 5627. ISSN: 1073-5623

Lazaro Nebreda, J., Solórzano, E. and Rodríguez-Pérez, MA. (2017) 'Clues for Cellular Structure Optimization in Aluminum Foams'. Advanced Engineering Materials, 19 (11). pp. 1600496 - 1600496. ISSN: 1438-1656

Hu, KQ., Jiang, W., Zhu, XZ., Zhang, Q., Sun, QQ. and Liu, XF. (2017) 'Affecting factors of P absorption rate of hypereutectic Al-Si alloys'. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 27 (11). pp. 2242 - 2250. ISSN: 1004-0609

Scamans, G. (2017) 'Advanced aluminium automotive engineering conference 2017'. Light Metal Age, 75 (6). pp. 10 - 15. ISSN: 0024-3345

Sen, S., Tyagi, M., Sharma, K., Sarkar, PS., Sarkar, S., Basak, CB., Pitale, S., Ghosh, M. and Gadkari, SC. et al. (2017) 'Organic-Inorganic Composite Films Based on Gd3Ga3Al2O12:Ce Scintillator Nanoparticles for X-ray Imaging Applications'. ACS Applied Materials and Interfaces, 9 (42). pp. 37310 - 37320. ISSN: 1944-8244

Kim, YM., Mendis, C., Sasaki, T., Letzig, D., Pyczak, F., Hono, K. and Yi, S. et al. (2017) 'Erratum to “Static recrystallization behaviour of cold rolled Mg-Zn-Y alloy and role of solute segregation in microstructure evolution” (Scr. Mater. (2017) (136) (41–45) (S135964621730177X) (10.1016/j.scriptamat.2017.04.001))'. Scripta Materialia, 145. pp. 131 - 131. ISSN: 1359-6462

Dong, X., Zhang, Y., Amirkhanlou, S. and Ji, S. (2017) 'High performance gravity cast Al9Si0.45Mg0.4Cu alloy inoculated with AlB2and TiB2'. Journal of Materials Processing Technology, 252. pp. 604 - 611. ISSN: 0924-0136 Open Access Link

Mohammadi, V., Nihtianov, S. and Fang, C. (2017) 'A doping-less junction-formation mechanism between n-silicon and an atomically thin boron layer'. Scientific Reports, 7 (1). pp. 1 - 9. ISSN: 2045-2322 Open Access Link

Ji, S. (2017) 'Revisit of Al-Si-Mg (Cu) cast alloys for gravity and high pressure die casting: Microstructure and mechanical properties'.Materials Science and Technology (MS&T17). Pittsburgh. 9 - 12 October.

Ren, FL., Wang, JG., Ge, HH., Li, J., Hu, Q., Nadendla, HB., Xia, MX. and Li, JG. et al. (2017) 'A Homogeneous Billet Layer Casting Fabrication Method'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48 (10). pp. 4453 - 4457. ISSN: 1073-5623

Li, Z., Limodin, N., Tandjaoui, A., Quaegebeur, P., Witz, J-F. and Balloy, D. (2017) 'Influence of Fe content on the damage mechanism in A319 aluminum alloy: Tensile tests and digital image correlation'. Engineering Fracture Mechanics, 183. pp. 94 - 108. ISSN: 0013-7944

Boni, AG., Chirila, C., Pasuk, I., Negrea, R., Pintilie, I. and Pintilie, L. (2017) 'Steplike Switching in Symmetric PbZr0.2Ti0.8 O3/CoFe O4/PbZr0.2Ti0.8 O3 Heterostructures for Multistate Ferroelectric Memory'. Physical Review Applied, 8 (3).

Fang, CM. and van Huis, MA. (2017) 'Structure and stability of hcp iron carbide precipitates: A first-principles study'. Heliyon, 3 (9). pp. 1 - 15. ISSN: 2405-8440 Open Access Link

Dieringa, H., Katsarou, L., Buzolin, R., Szakács, G., Horstmann, M., Wolff, M., Mendis, C., Vorozhtsov, S. and StJohn, D. et al. (2017) 'Ultrasound assisted casting of an AM60 based metal matrix nanocomposite, its properties, and recyclability'. Metals, 7 (10). pp. 388 - 388. ISSN: 2075-4701 Open Access Link

Fang, CM., Mohammadi, V., Nihtianov, S. and Sluiter, MHF. (2017) 'Stability, local structure and electronic properties of borane radicals on the Si(1 0 0)'. Computational Materials Science, 140. pp. 253 - 260. ISSN: 0927-0256 Open Access Link

Hou, L., Liu, M., Wang, X., Zhuang, L. and Zhang, J. (2017) 'Cryogenic Processing High-Strength 7050 Aluminum Alloy and Controlling of the Microstructures and Mechanical Properties'. Jinshu Xuebao/Acta Metallurgica Sinica, 53 (9). pp. 1075 - 1090. ISSN: 0412-1961

Al-Helal, K., Fan, Z. and Stone, I. (2017) 'Refinement and Modification of Silicon Phases in Solidification of High Purity Hypereutectic Al-15si Alloy'.Liquid Metal Processing & Casting Conference 2017. Philadelphia, Pennsylvania, USA. 10 - 13 September. Proceedings of the Liquid Metal Processing & Casting Conference 2017. pp. 281 - 286.Open Access Link

Su, SS. and Chang, I. (2017) 'Review of production routes of nanomaterials', inCommercialization of Nanotechnologies-A Case Study Approach. Springer International Publishing. pp. 15 - 29. ISBN 13: 9783319569789.

Wang, L., Yang, L., Zhang, D., Xia, MING-XU., Wang, YUN., Chen, B. and Li, J-G. et al. (2017) 'Nucleation interface of Al−Sb alloys on single crystal Al2O3 substrate'. Transactions of Nonferrous Metals Society of China, 27 (9). pp. 2104 - 2111. ISSN: 1003-6326

Cheng, K., Niu, ZC., Wang, RC., Rakowski, R. and Bateman, R. (2017) 'Smart Cutting Tools and Smart Machining: Development Approaches, and Their Implementation and Application Perspectives'. Chinese Journal of Mechanical Engineering (English Edition), 30 (5). pp. 1162 - 1176. ISSN: 1000-9345 Open Access Link

Shurkin, PK., Belov, NA., Akopyan, TK., Alabin, AN., Aleshchenko, AS. and Avxentieva, NN. (2017) 'Formation of the structure of thin-sheet rolled product from a high-strength sparingly alloyed aluminum alloy “nikalin”'. Physics of Metals and Metallography, 118 (9). pp. 896 - 904. ISSN: 0031-918X

Hou, L., Yu, J., Zhang, D., Zhuang, L., Zhou, L. and Zhang, J. (2017) 'Corrosion Behavior of Friction Stir Welded Al-Mg-(Zn) Alloys'. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 46 (9). pp. 2437 - 2444. ISSN: 1002-185X

Wang, G., Wang, Q., Easton, MA., Dargusch, MS., Qian, M., Eskin, DG. and StJohn, DH. et al. (2017) 'Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium'. Scientific Reports, 7 (1). pp. 9729 - 9729. ISSN: 2045-2322 Open Access Link

Sreekumar, VM., Nadendla, HB. and Eskin, D. (2017) 'Prospects of in-situ α-Al2O3 as an inoculant in Aluminium- a feasibility study'. Journal of Materials Engineering and Performance, 26 (9). pp. 4166 - 4176. ISSN: 1059-9495 Open Access Link

Zuo, J., Hou, L., Shi, J., Cui, H., Zhuang, L. and Zhang, J. (2017) 'The mechanism of grain refinement and plasticity enhancement by an improved thermomechanical treatment of 7055 Al alloy'. Materials Science and Engineering: A, 702. pp. 42 - 52. ISSN: 0921-5093

Huang, X., Dong, X., Yang, C., Tian, F., Liu, L., Chen, G. and Li, P. et al. (2017) 'Investigation of atom distribution in Mg-9wt.%Al melt using small-angle X-ray scattering and molecular dynamics simulation'. Journal of Non-Crystalline Solids, 473. pp. 47 - 53. ISSN: 0022-3093

Wang, L., Lu, W., Hu, Q., Xia, M., Wang, Y. and Li, J-G. (2017) 'Interfacial tuning for the nucleation of liquid AlCu alloy'. Acta Materialia, 139. pp. 75 - 85. ISSN: 1359-6454

Huang, Y. (2017) 'Steady state and a general scale law of deformation'.38th Riso International Symposium on Materials Science. Riso, DENMARK. 1 - 8 September. IOP Publishing. pp. 012029 - 012029. ISSN: 1757-8981 Open Access Link

Zuo, J., Hou, L., Shi, J., Cui, H., Zhuang, L. and Zhang, J. (2017) 'Effect of deformation induced precipitation on grain refinement and improvement of mechanical properties AA 7055 aluminum alloy'. Materials Characterization, 130. pp. 123 - 134. ISSN: 1044-5803

Liu, D., Liu, Y., Zhao, Y., Huang, Y. and Chen, M. (2017) 'The hot deformation behavior and microstructure evolution of HA/Mg-3Zn-0.8Zr composites for biomedical application'. Materials Science and Engineering C, 77. pp. 690 - 697. ISSN: 0928-4931

Palade, S., Pantazi, A., Vulpe, S., Berbecaru, C., Ţucureanu, V., Oprea, O., Negrea, RF. and Dragoman, D. et al. (2017) 'Tunable dielectric properties in polyacrylonitrile/multiwall carbon nanotube composites'. Polymer Composites, 38 (8). pp. 1741 - 1748. ISSN: 0272-8397