Iida, K., Babu, NH., Shi, YH., Cardwell, DA. and Murakami, M. (2006) 'Gd–Ba–Cu–O bulk superconductors fabricated by a seeded infiltration growth technique under reduced oxygen partial pressure'. Superconductor Science and Technology, 19 (6). pp. 641 - 647. ISSN: 0953-2048

Yong, XP., Chang, ITH. and Jones, IP. (2006) 'Synthesis and characterisation of quasicrystalline Al based composites'. Powder Metallurgy, 49 (2). pp. 140 - 145. ISSN: 0032-5899

Shi, Y., Babu, NH., Iida, K. and Cardwell, DA. (2006) 'Mg-doped Nd-Ba-Cu-O generic seed crystals for the top-seeded melt growth of large-grain (rare earth)-Ba-Cu-O bulk superconductors'. Journal of Materials Research, 21 (6). pp. 1355 - 1362. ISSN: 0884-2914

Hari Babu, N., Liu, C., Iida, K. and Cardwell, DA. (2006) 'Nano-composite single grain YBa2Cu3O 7-δ/Y2Ba4CuBiOy bulk superconductors'.7th European Conference on Applied Superconductivity. Vienna Univ Technol, Vienna, AUSTRIA. 1 - 15 September. IOP Publishing. pp. 377 - 380. ISSN: 1742-6588 Open Access Link

Cardwell, DA., Hari Babu, N., Shi, Y. and Iida, K. (2006) 'Single grain (LRE)-Ba-Cu-O superconductors fabricated by top seeded melt growth in air'.7th European Conference on Applied Superconductivity. Vienna Univ Technol, Vienna, AUSTRIA. 1 - 15 September. IOP Publishing. pp. 421 - 424. ISSN: 1742-6588 Open Access Link

Haindl, S., Weber, HW., Sefciková, M., Zmorayová, K., Diko, P., Hari Babu, N., Cardwell, DA., Shlyk, L. and Krabbes, G. et al. (2006) 'Studies of cracking behavior in melt-processed YBCO bulk superconductors'.7th European Conference on Applied Superconductivity. Vienna Univ Technol, Vienna, AUSTRIA. 1 - 15 September. IOP Publishing. pp. 429 - 433. ISSN: 1742-6588 Open Access Link

Koblischka-Veneva, A., Mücklich, F., Koblischka, MR., Hari Babu, N. and Cardwell, DA. (2006) 'EBSD characterisation of Y2Ba4CuUOx phase in melttextured YBCO with addition of depleted uranium oxide'.7th European Conference on Applied Superconductivity. Vienna Univ Technol, Vienna, AUSTRIA. 1 - 15 September. IOP Publishing. pp. 438 - 441. ISSN: 1742-6588 Open Access Link

Shi, Y., Hari Babu, N., Iida, K. and Cardwell, D. (2006) 'Properties of Mg-doped Nd-Ba-Cu-O generic seed crystals for the top seeded melt growth of (RE)-Ba-Cu-O bulk superconductors'.7th European Conference on Applied Superconductivity. Vienna Univ Technol, Vienna, AUSTRIA. 1 - 15 September. IOP Publishing. pp. 446 - 449. ISSN: 1742-6588 Open Access Link

Koblischka, MR., Winter, M., Hartmann, U., Koblischka-Veneva, A., Hari Babu, N. and Cardwell, DA. (2006) 'Analysis of melt-textured YBCO with nanoscale inclusions'.7th European Conference on Applied Superconductivity. Vienna Univ Technol, Vienna, AUSTRIA. 1 - 15 September. IOP Publishing. pp. 522 - 526. ISSN: 1742-6588 Open Access Link

Koblischka-Veneva, A., Holzapfel, C., Mücklich, F., Koblischka, MR., Hari Babu, N. and Cardwell, DA. (2006) 'Investigation of grain orientations of melt-textured HTSC with addition of uranium oxide, Y2O3 and Y2BaCuO5'.7th European Conference on Applied Superconductivity. Vienna Univ Technol, Vienna, AUSTRIA. 1 - 15 September. IOP Publishing. pp. 527 - 530. ISSN: 1742-6588 Open Access Link

ASSADI, H., REUTZEL, S. and HERLACH, D. (2006) 'Kinetics of solidification of B2 intermetallic phase in the Ni–Al system'. Acta Materialia, 54 (10). pp. 2793 - 2800. ISSN: 1359-6454

Gandin, CA. and Jacot, A. (2006) 'Modeling of precipitate free zone in multicomponent aluminum alloys'.Symposium on Simulation of Aluminum Shape Casting Processing - From Alloy Design to Mechanical Properties. San Antonio, TX. 22 - 16 March. MINERALS, METALS & MATERIALS SOC. pp. 211 - 220.

Gärtner, F., Kreye, H., Schmidt, T., Stoltenhoff, T. and Assadi, H. (2006) 'Bonding mechanisms and applications of cold spraying'. Proceedings of the 18th International Conference on Surface Modification Technologies. pp. 35 - 43.

Viswanathan, UK., Singh, RN., Basak, CB., Anantharaman, S. and Sahoo, KC. (2006) 'Evaluation of effect of hydrogen on toughness of Zircaloy-2 by instrumented drop weight impact testing'. Journal of Nuclear Materials, 350 (3). pp. 310 - 319. ISSN: 0022-3115

Li, H., Guo, J., Huai, K. and Ye, H. (2006) 'Microstructure characterization and room temperature deformation of a rapidly solidified NiAl-based eutectic alloy containing trace Dy'. Journal of Crystal Growth, 290 (1). pp. 258 - 265. ISSN: 0022-0248

Men, H., Pang, SJ. and Zhang, T. (2006) 'Effect of Er doping on glass-forming ability of Co₅₀Cr₁₅Mo₁₄C₁₅B₆ alloy'. Journal of Materials Research, 21 (4). pp. 958 - 961. ISSN: 0884-2914

Wadeson, DA., Zhou, X., Thompson, GE., Skeldon, P., Oosterkamp, LD. and Scamans, G. (2006) 'Corrosion behaviour of friction stir welded AA7108 T79 aluminium alloy'. Corrosion Science, 48 (4). pp. 887 - 897. ISSN: 0010-938X

Klösch, G., Schumacher, P. and McKay, BJ. (2006) 'Preliminary investigation on the grain refinement behavior of ZrB particles in Mg-Al alloys', in Luo, AA., Neelameggham, NR. and Beals, RS. (eds.) MINERALS, METALS & MATERIALS SOC. , 2006. pp. 69 - 75.

Turchin, AN., Eskin, DG. and Katgerman, L. (2006) 'Comparison of experiments with computer simulations of constant unidirectional melt flow along solidification front'.Technical Session on Light Metals 2006 held at the 135th TMS Annual Meeting. San Antonio, TX. 12 - 16 March. MINERALS, METALS & MATERIALS SOC. pp. 839 - 843. ISSN: 0147-0809

Ruvalcaba, D., Eskin, D. and Katgerman, L. (2006) 'Behavior of the solid-liquid interface at the moment of quenching during solidification of aluminum alloys'.TMS Annual Meeting. San Antonio. 12 - 16 March. MINERALS, METALS & MATERIALS SOC. pp. 813 - 817. ISSN: 0147-0809

Assadi, H. (2006) 'A Phase‐Field Model for Crystallization into Multiple Grain Structures', in Herlach, DM. (ed.) Solidification and Crystallization. John Wiley & Sons. pp. 17 - 26. ISBN 10: 3527604359.

Li, R., Pang, S., Men, H., Ma, C. and Zhang, T. (2006) 'Formation and mechanical properties of (Ce–La–Pr–Nd)–Co–Al bulk glassy alloys with superior glass-forming ability'. Scripta Materialia, 54 (6). pp. 1123 - 1126. ISSN: 1359-6462

Ji, S., Qian, M. and Fan, Z. (2006) 'Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting'. Metallurgical and Materials Transactions A, 37 (3). pp. 779 - 787. ISSN: 1073-5623 Open Access Link

Suyitno., Eskin, DG. and Katgerman, L. (2006) 'Structure observations related to hot tearing of Al–Cu billets produced by direct-chill casting'. Materials Science and Engineering: A, 420 (1-2). pp. 1 - 7. ISSN: 0921-5093

Fang, CM. and de Wijs, GA. (2006) 'Local Structure and Chemical Bonding of Protonated Li_xMn₂O₄ Spinels from First Principles'. Chemistry of Materials, 18 (5). pp. 1169 - 1173. ISSN: 0897-4756

Yi, H., Ma, N., Li, X., Zhang, Y. and Wang, H. (2006) 'High-temperature mechanics properties of in situ TiB2p reinforced Al–Si alloy composites'. Materials Science and Engineering: A, 419 (1-2). pp. 12 - 17. ISSN: 0921-5093

Yi, H., Ma, N., Zhang, Y., Li, X. and Wang, H. (2006) 'Effective elastic moduli of Al–Si composites reinforced in situ with TiB2 particles'. Scripta Materialia, 54 (6). pp. 1093 - 1097. ISSN: 1359-6462

Liu, Y., Zhou, X., Thompson, GE., Hashimoto, T., Scamans, GM. and Afseth, A. (2006) 'Precipitation and Corrosion Behaviour of Nano-Structured Near-Surface Layers on an AA6111 Aluminium Alloy'.EMAG/NANO Conference on Imaging, Analysis and Fabrication on the Nanoscale. Univ Leeds, Leeds, ENGLAND. 22 - 2 September. IOP Publishing. pp. 103 - 106. ISSN: 1742-6588

Klösch, G., McKay, B. and Schumacher, P. (2006) 'Untersuchung zum Kornfeinungsverhalten von ZrB2-Partikeln in Magnesium-Aluminium-Legierungen'. Giesserei-Rundschau. pp. 58 - 62.

Schmidt, T., Gärtner, F., Assadi, H. and Kreye, H. (2006) 'Development of a generalized parameter window for cold spray deposition'. Acta Materialia, 54 (3). pp. 729 - 742. ISSN: 1359-6454

Hua, M., Shu-Jie, P., Ran, L. and Tao, Z. (2006) 'Crystallization Kinetics of Co₄₈Cr₁₅Mo₁₄C₁₅B₆Er₂Bulk Metallic Glass with High Thermal Stability'. Chinese Physics Letters, 23 (2). pp. 417 - 419. ISSN: 0256-307X

Kim, J., Jiang, K. and Chang, I. (2006) 'Pressure Free Fabrication of 3D Microcomponents Using Al Powder'. Advanced Engineering Materials, 8 (1-2). pp. 38 - 41. ISSN: 1438-1656

Niederberger, C., Michler, J. and Jacot, A. (2006) 'Inverse method for the determination of a mathematical expression for the anisotropy of the solid-liquid interfacial energy inAl−Zn−Sialloys'. Physical Review E, 74 (2). pp. 021604. ISSN: 1539-3755

Ji, S., Roberts, K. and Fan, Z. (2006) 'Isothermal coarsening of fine and spherical particles in semisolid slurry of Mg-9Al-1Zn alloy under low shear'. Scripta Materialia, 55 (11). pp. 971 - 974. ISSN: 1359-6462

Ruvalcaba, D., Eskin, DG. and Katgerman, L. (2006) '3D Microstructure Reconstruction of Aluminium Alloys Quenched during Solidification'.10th International Conference on Aliminium Alloys (ICAA-10). Vancouver, CANADA. 1 - 13 July. Trans Tech Publications, Ltd.. pp. 1707 - 1712. ISSN: 0255-5476

Hitchcock, M. and Fan, ZY. (2006) 'Solidification Behaviour of 357 Al-Alloy under Intensive Forced Convection'. Materials Science Forum, 519-521 (PART 2). pp. 1747 - 1752. ISSN: 0255-5476

Suyitno., Eskin, DG. and Katgerman, L. (2006) 'Thermal Contraction of AA5182 for Prediction of Ingot Distortions'. Key Engineering Materials, 306-308 II. pp. 977 - 982. ISSN: 1013-9826

Scamans, GM., Afseth, A., Thompson, GE., Liu, Y. and Zhou, X. (2006) 'Corrosion of painted aluminium sheet'. Aluminium Alloys, Parts 1 and 2, 519-521 (PART 1). pp. 647 - 654. ISSN: 0255-5476

Das, A., Liu, G. and Fan, Z. (2006) 'Investigation on the microstructural refinement of an Mg-6 wt.% Zn alloy'. Materials Science and Engineering: A, 419 (1-2). pp. 349 - 356. ISSN: 0921-5093

Wang, Y., Liu, G. and Fan, Z. (2006) 'Microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment'. Acta Materialia, 54 (3). pp. 689 - 699. ISSN: 1359-6454

Fan, Z., Liu, G. and Wang, Y. (2006) 'Microstructure and mechanical properties of rheo-diecast AZ91D magnesium alloy'. Journal of Materials Science, 41 (12). pp. 3631 - 3644. ISSN: 0022-2461

Yang, BC., Zhang, SM., Xu, J., Shi, LK. and Fan, Z. (2006) 'Hot compressive deformation of rheocast AZ31 magnesium alloy'. Solid State Phenomena: Semi-Solid Processing of Alloys and Composites, 116-117. pp. 742 - 745. ISSN: 1662-9779

Fang, X., Shao, G. and Fan, Z. (2006) 'Microstructure and mechanical properties of Fe-containing Al-alloys processed by a rheo-diecasting process'.10th International Conference on Aluminium Alloys (ICAA-10). Vancouver, CANADA. Trans Tech Publications, Ltd.. pp. 1251 - 1256. ISSN: 1662-9752

Zhen, Z., Qian, M., Ji, S. and Fan, Z. (2006) 'The effects of rheo-diecasting on the integrity and mechanical properties of Mg-6Al-1Zn'. Scripta Materialia, 54 (2). pp. 207 - 211. ISSN: 1359-6462

Tang, H., Wrobel, LC. and Fan, Z. (2006) 'Numerical analysis of the hydrodynamic behaviour of immiscible metallic alloys in twin-screw rheomixing process'. Materials and Design, 27 (10). pp. 1065 - 1075. ISSN: 0261-3069 Open Access Link

Wang, Y., Liu, G. and Fan, Z. (2006) 'A new heat treatment procedure for rheo-diecast AZ91D magnesium alloy'. Scripta Materialia, 54 (5). pp. 903 - 908. ISSN: 1359-6462

Fang, X. and Fan, Z. (2006) 'Rheo-diecasting of Al-Si-Pb immiscible alloys'. Scripta Materialia, 54 (5). pp. 789 - 793. ISSN: 1359-6462

Zhang, SM., Fan, Z. and Zhen, Z. (2006) 'Direct chill rheocasting (DCRC) of AZ31 Mg alloy'. Materials Science and Technology, 22 (12). pp. 1489 - 1498. ISSN: 0267-0836

Shao, G., Varsani, V., Wang, Y., Qian, M. and Fan, Z. (2006) 'On the solidification microstructure of Mg-30Zn-2.5Y metal-intermetallic alloy'. Intermetallics, 14 (6). pp. 596 - 602. ISSN: 0966-9795

Shao, G., Varsani, V. and Fan, Z. (2006) 'Thermodynamic modelling of the Y-Zn and Mg-Zn-Y systems'. Calphad, 30 (3). pp. 286 - 295. ISSN: 0364-5916

Men, H., Fu, J., Pang, S., Ma, C. and Zhang, T. (2006) 'Formation and Thermal Stability of Cu_46.25Zr_44.25Al_7.5Er₂ Bulk Metallic Glass with a Diameter of 12 mm'. MATERIALS TRANSACTIONS, 47 (11). pp. 2882 - 2884. ISSN: 1345-9678