Fang, X., Fan, Z., Ralph, B., Evans, P. and Underhill, R. (2003) 'Effects of tempering temperature on tensile and hole expansion properties of a C-Mn steel'. Journal of Materials Processing Technology, 132 (1-3). pp. 215 - 218. ISSN: 0924-0136

Cardwell, DA., Hari Babu, N., Kambara, M., Shi, YH., Tarrant, CD. and Schneider, KR. (2003) 'Improved-Trapped Magnetic Fields in Top Seeded Melt Grown YBCO Superconductor Doped with Depleted and Enriched Uranium Oxide'.4th International Conference on Processing and Manufacturing of Advanced Materials. UNIV CARLOS III MADRID, MADRID, SPAIN. 1 - 11 July. Trans Tech Publications, Ltd.. pp. 3499 - 3504. ISSN: 0255-5476

Eskin, DG. (2003) 'Decomposition of supersaturated solid solutions in Al–Cu–Mg–Si alloys'. Journal of Materials Science, 38 (2). pp. 279 - 290. ISSN: 0022-2461

Eskin, D. and Katgerman, L. (2003) 'Hardening, Annealing, and Aging', in Totten, GE. and Mackenzie, DS. (eds.) Handbook of Aluminum. New York : Marcel Dekker. , 1. pp. 259 - 303. ISBN 10: 0-8247-0494-0.

M'Hamdi, M., Pilipenko, A. and Eskin, DG. (2003) 'Experimental and numerical study of contraction during solidification of aluminium alloys'. AFS Transactions, 111. pp. 333 - 340.

Waite, AM., Lloyd, NS., Ashburn, P., Evans, AGR., Ernst, T., Achard, H., Deleonibus, S., Wang, Y. and Hemment, P. et al. (2003) 'Raised source/drain (RSD) for 50nm MOSFETs - effect of epitaxy layer thickness on short channel effects'.ESSDERC 2003. 33rd European Solid-State Device Research - ESSDERC '03. IEEE. pp. 223 - 226. ISSN: 1930-8876

Fang, CM., Li, YQ., Hintzen, HT. and de With, G. (2003) 'Crystal and electronic structure of the novel nitrides MYSi4N7 (M = Sr, Ba) with peculiar NSi4 coordination'. Journal of Materials Chemistry, 13 (6). pp. 1480 - 1480. ISSN: 0959-9428

Men, H., Kim, WT. and Kim, DH. (2003) 'Effect of Titanium on Glass-forming Ability of Cu-Zr-Al Alloys'. MATERIALS TRANSACTIONS, 44 (8). pp. 1647 - 1650. ISSN: 1345-9678

Men, H., Kim, WT. and Kim, DH. (2003) 'Fabrication and Mechanical Properties of Mg₆₅Cu₁₅Ag₅Pd₅Gd₁₀ Bulk Metallic Glass'. Japan Institute of Metals. pp. 2141 - 2144. ISSN: 1345-9678

Wang, XY., Chang, ITH. and Aindow, M. (2002) 'Nucleation of the C40-to-C11 b transformation in magnetron-sputtered MoSi 2 thin films'. Philosophical Magazine Letters, 82 (12). pp. 687 - 694. ISSN: 0950-0839

Afseth, A., Nordlien, JH., Scamans, GM. and Nisancioglu, K. (2002) 'Filiform corrosion of binary aluminium model alloys'. Corrosion Science, 44 (11). pp. 2529 - 2542. ISSN: 0010-938X

Afseth, A., Nordlien, JH., Scamans, GM. and Nisancioglu, K. (2002) 'Filiform corrosion of AA3005 aluminium analogue model alloys'. Corrosion Science, 44 (11). pp. 2543 - 2559. ISSN: 0010-938X

Afseth, A., Nordlien, JH., Scamans, GM. and Nisancioglu, K. (2002) 'Effect of thermo-mechanical processing on filiform corrosion of aluminium alloy AA3005'. Corrosion Science, 44 (11). pp. 2491 - 2506. ISSN: 0010-938X

Rainforth, WM., Leonard, AJ., Perrin, C., Bedolla-Jacuinde, A., Wang, Y., Jones, H. and Luo, Q. et al. (2002) 'High resolution observations of friction-induced oxide and its interaction with the worn surface'. Tribology International, 35 (11). pp. 731 - 748. ISSN: 0301-679X

Ji, S. and Fan, Z. (2002) 'Solidification behavior of Sn-15 wt pct Pb alloy under a high shear rate and high intensity of turbulence during semisolid processing'. Metallurgical and Materials Transactions A, 33 (11). pp. 3511 - 3520. ISSN: 1073-5623

Das, A., Ji, S. and Fan, Z. (2002) 'Morphological development of solidification structures under forced fluid flow: A Monte-Carlo simulation'. Acta Materialia, 50 (18). pp. 4571 - 4585. ISSN: 1359-6454

Fang, CM. and With, GD. (2002) 'Crystal structure and chemical bonding of the high-pressure phase of MgAl 2 O 4 from first-principles calculations'. Philosophical Magazine A, 82 (15). pp. 2885 - 2894. ISSN: 0141-8610

Babu, NH., Kambara, M., Shi, Y-H., Cardwell, DA., Tarrant, CD. and Schneider, KR. (2002) 'Reply to `Comment on ``Processing and Microstructure of Single Grain U-Doped Y-Ba-Cu-O Superconductor'' ''. Superconductor Science and Technology, 15 (10). pp. 1476 - 1477. ISSN: 0953-2048

Gonz lez, MT., Hari-Babu, N. and Cardwell, DA. (2002) 'Enhancement ofJ_cunder magnetic field by Zn doping in melt-textured Y Ba Cu O superconductors'. Superconductor Science and Technology, 15 (10). pp. 1372 - 1376. ISSN: 0953-2048

Weinstein, R. and Sawh, R-P. (2002) 'Comment on  Processing and microstructure of single grain uranium-doped Y Ba Cu O superconductor '. Superconductor Science and Technology, 15 (10). pp. 1474 - 1475. ISSN: 0953-2048

Huang, Y., Humphreys, FJ. and Brough, I. (2002) 'The application of a hot deformation SEM stage, backscattered electron imaging and EBSD to the study of thermomechanical processing'. Journal of Microscopy, 208 (1). pp. 18 - 23. ISSN: 0022-2720

Fang, CM., de Wijs, GA. and de Groot, RA. (2002) 'Spin‐Polarization in Half‐Metals.'. ChemInform, 33 (39). pp. 228 - 228. ISSN: 0931-7597

Fang, CM. and With, GD. (2002) 'Crystal structure and chemical bonding of the high-pressure phase of MgAl₂O₄from first-principles calculations'. Philosophical Magazine A, 82 (15). pp. 2885 - 2894. ISSN: 0141-8610

Fang, CM., Loong, C-K., de Wijs, GA. and de With, G. (2002) 'Phonon spectrum ofZnAl2O4spinel from inelastic neutron scattering and first-principles calculations'. Physical Review B, 66 (14). pp. 1443011 - 1443017. ISSN: 0163-1829

Uzunsoy, D., Chang, ITH. and Bowen, P. (2002) 'Microstructural evolution an dmechanical properties of Rapidsteel 2.0'. Powder Metallurgy, 45 (3). pp. 251 - 254. ISSN: 0032-5899

Ji, S., Fan, Z., Roberts, K. and Fang, X. (2002) 'Development of Twin-screw rheoextrusion process'.the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Tsukuba. 27 - 27 September. Proceeding the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. pp. 677 - 682.

Ji, S., Fan, Z., Liu, G., Fang, X. and Song, S. (2002) 'Twin-screw rheomoulding of AZ91D Mg-alloys'.7th International Conference. on Semi-Solid Processing of Alloys and Composites. Tsukuba, Japan. 22 - 27 September. Proceedings of the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. pp. 683 - 688.Open Access Link

Das, A., Ji, S. and Fan, Z. (2002) 'Solidification microstructures obtained by a novel twin-screw liquidus casting method'.the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Tsukuba, Japan. 20 - 27 September. Proc. the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. pp. 689 - 694.Open Access Link

Eskin, GI. and Eskin, DG. (2002) 'Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt'.8th Conference of the European-Society-of-Sonochemistry. VILLASIMIUS, ITALY. 14 - 19 September. ELSEVIER SCIENCE BV. pp. 297 - 301. ISSN: 1350-4177

Jacot, A. and Rappaz, M. (2002) 'A pseudo-front tracking technique for the modelling of solidification microstructures in multi-component alloys [Acta Materialia 50(8), pp. 1909 - 1926]'. Acta Materialia, 50 (15). pp. 3971 - 3971. ISSN: 1359-6454

Wang, XY., Chang, ITH. and Aindow, M. (2002) 'A transmission electron microscope study of microstructural development in magnetron-sputtered MoSi2 thin films'. Intermetallics, 10 (9). pp. 829 - 839. ISSN: 0966-9795

Prima, F., Tomut, M., Stone, I., Cantor, B., Janickovic, D., Vlasak, G. and Svec, P. et al. (2002) 'In situ resistometric investigation of phase transformations in rapidly solidified Al-based alloys containing dispersed nanoscale particles'. Materials Science and Engineering A, 375-377 (1-2 SPEC. ISS.). pp. 772 - 775. ISSN: 0921-5093

Galano, M., Audebert, F., Cantor, B. and Stone, I. (2002) 'Structural characterisation and stability of new nanoquasicrystalline Al-based alloys'. Materials Science and Engineering A, 375-377 (1-2 SPEC. ISS.). pp. 1206 - 1211. ISSN: 0921-5093

Tomut, M., Prima, F., Stone, IC., Cantor, B., Huenen, G., Vaughan, G., Yavari, AR. and Svec, P. et al. (2002) 'Microstructure evolution of high strength AlFeVTi nanoquasicrystalline alloys at elevated temperature'. Materials Science and Engineering A, 375-377 (1-2 SPEC. ISS.). pp. 1239 - 1245. ISSN: 0921-5093

Cardwell, DA., Hari Babu, N., Kambara, M. and Campbell, AM. (2002) 'Magnetic properties and critical currents of bulk MgB2 polycrystalline superconductor'. Physica C: Superconductivity, 372-376 (PART 2). pp. 1262 - 1265. ISSN: 0921-4534

Men, H., Yang, M. and Xu, J. (2002) 'Effect of Co addition on the glass-forming ability of Mg65Cu25Y10 alloy'. Cailiao Yanjiu Xuebao Chinese Journal of Materials Research, 16 (4). pp. 379 - 384. ISSN: 1005-3093

Hari Babu, N., Kambara, M., Cardwell, DA., Tarrant, CD. and Schneider, K. (2002) 'Effect of the addition of depleted UO2 on the microstructure of melt processed Y–Ba–Cu–O superconductors'. Physica C: Superconductivity, 372-376 (PART 2). pp. 1183 - 1186. ISSN: 0921-4534

Kambara, M., Hari Babu, N., Cardwell, DA. and Campbell, AM. (2002) 'Joining of Nd–Ba–Cu–O superconducting oxides'. Physica C: Superconductivity, 372-376 (PART 2). pp. 1155 - 1158. ISSN: 0921-4534

Fang, X., Fan, Z. and Ji, S. (2002) 'Processing of immiscible alloys by a twin-screw rheomixing process'.the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Tsukuba, Japan. 20 - 27 September.Open Access Link

Huang, Y. and Humphreys, FJ. (2002) 'An in-situ study of substructural evolution in a single-phase aluminium alloy'. Materials Science Forum, 396-402. pp. 411 - 417. ISSN: 0255-5476

Eskin, GI. and Eskin, DG. (2002) 'Effects of ultrasonic (cavitation) melt processing on the structure refinement and property improvement of cast and worked aluminum alloys'.8th International Conference on Aluminium Alloys. CAMBRIDGE, ENGLAND. 2 - 5 July. TRANS TECH PUBLICATIONS LTD. pp. 77 - 82. ISSN: 0255-5476

Eskin, DG. (2002) 'Hardening and precipitation in the Al-Cu-Mg-Si alloying system'.8th International Conference on Aluminium Alloys. CAMBRIDGE, ENGLAND. 2 - 5 July. TRANS TECH PUBLICATIONS LTD. pp. 917 - 922. ISSN: 0255-5476

Belov, NA., Koltsov, AV. and Eskin, DG. (2002) 'The Al-Cu-Fe-Mg-Si phase diagram in the range of Al-Cu alloys'.8th International Conference on Aluminium Alloys. CAMBRIDGE, ENGLAND. 2 - 5 July. TRANS TECH PUBLICATIONS LTD. pp. 929 - 934. ISSN: 0255-5476

Huang, Y. (2002) 'An in-situ study of substructural evolution in a single-phase aluminium alloy'.8th International Conference on Aluminium Alloys. Cambridge, UK. 2 - 5 July. Trans Tech Publications, Ltd.. pp. 411 - 416. ISSN: 0255-5476

Huang, Y. and Humphreys, FJ. (2002) 'In situ SEM hot deformation experiments on Al alloys'.International Conference on Thermomechanical processing: Mechanics, Microstructure & Control. Sheffield, UK. 23 - 26 June.

Fang, CM., Hintzen, HT. and de With, G. (2002) 'ChemInform Abstract: First‐Principles Electronic Structure Calculations of BaSi₇N₁₀ with Both Corner‐ and Edge‐Sharing SiN₄ Tetrahedra.'. ChemInform, 33 (24). ISSN: 0931-7597

Manson-Whitton, ED., Stone, IC., Jones, JR., Grant, PS. and Cantor, B. (2002) 'Isothermal grain coarsening of spray formed alloys in the semi-solid state'. ACTA MATERIALIA, 50 (10). pp. 2517 - 2535. ISSN: 1359-6454

Huang, Y. and Humphreys, FJ. (2002) 'Microstructural evolution during in-situ deformation of a Supral 100 alloy'.Euro-SPF 02. Bristol, UK. 7 - 8 November.

Li, D., Zhou, Z. and Fan, Z. (2002) 'Al2O3p/Al composites with compatible interface by matrix alloying'. Jinshu Xuebao Acta Metallurgica Sinica, 38 (6). pp. 602 - 608. ISSN: 0412-1961

Liu, YJ. and Chang, ITH. (2002) 'The correlation of microstructural development and thermal stability of mechanically alloyed multicomponent Fe-Co-Ni-Zr-B alloys'. Acta Materialia, 50 (10). pp. 2747 - 2760. ISSN: 1359-6454