BCAST
View our websiteLiu, D., Liu, Y., Zhao, Y., Huang, Y. and Chen, M. (2017) 'The hot deformation behavior and microstructure evolution of HA/Mg-3Zn-0.8Zr composites for biomedical application'. Materials Science and Engineering C, 77. pp. 690 - 697. ISSN: 0928-4931
Huang, Y. (2017) 'Steady state and a general scale law of deformation'.38th Riso International Symposium on Materials Science. Riso, DENMARK. 1 - 8 September. IOP Publishing. pp. 012029 - 012029. ISSN: 1757-8981 Open Access Link
Zuo, J., Hou, L., Shi, J., Cui, H., Zhuang, L. and Zhang, J. (2017) 'The mechanism of grain refinement and plasticity enhancement by an improved thermomechanical treatment of 7055 Al alloy'. Materials Science and Engineering: A, 702. pp. 42 - 52. ISSN: 0921-5093
Zuo, J., Hou, L., Shi, J., Cui, H., Zhuang, L. and Zhang, J. (2017) 'Effect of deformation induced precipitation on grain refinement and improvement of mechanical properties AA 7055 aluminum alloy'. Materials Characterization, 130. pp. 123 - 134. ISSN: 1044-5803
Palade, S., Pantazi, A., Vulpe, S., Berbecaru, C., Ţucureanu, V., Oprea, O., et al. (2017) 'Tunable dielectric properties in polyacrylonitrile/multiwall carbon nanotube composites'. Polymer Composites, 38 (8). pp. 1741 - 1748. ISSN: 0272-8397
Acsente, T., Negrea, RF., Nistor, LC., Matei, E., Grisolia, C., Birjega, R. and et al. (2017) 'Tungsten nanoparticles with controlled shape and crystallinity obtained by magnetron sputtering and gas aggregation'. Materials Letters, 200. pp. 121 - 124. ISSN: 0167-577X
Kotadia, HR., Qian, M., Eskin, DG. and Das, A. (2017) 'On the microstructural refinement in commercial purity Al and Al-10 wt% Cu alloy under ultrasonication during solidification'. Materials & Design, 132. pp. 266 - 274. ISSN: 0264-1275 Open Access Link
Cai, Q., Fan, Z., Zhu, X., Zhang, Y., Gao, F. and Chang, I. (2017) 'Refinement of eutectic microstructure in quaternary Al-Cu-Si-Mg alloys'.6th Decennial International Conference on Solidification Processing, SP17. Windsor. 25 - 28 July. SP17 Conference Proceedings.Open Access Link
Que, Z., Zhou, Y., Wang, Y. and Fan, Z. (2017) 'Composition templating for heterogeneous nucleation of intermetailic compounds'.Proceedings of the 6th Decennial International Conference on Solidification. Windsor, UK. 25 - 27 July. Proceedings of the 6th Decennial International Conference on Solidification. pp. 1 - 5.Open Access Link
Basak, CB. and Hari Babu, N. (2017) 'Influence of Cu on modifying the beta phase and enhancing the mechanical properties of recycled Al-Si-Fe cast alloys'. Scientific Reports, 7 (1). pp. 1 - 10. ISSN: 2045-2322 Open Access Link
Dong, X., Zhang, Y. and Ji, S. (2017) 'Enhancement of mechanical properties in high silicon gravity cast AlSi9Mg alloy refined by Al3Ti3B master alloy'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 700. pp. 291 - 300. ISSN: 0921-5093 Open Access Link
Toropova, LS., Eskin, DG., Kharakterova, ML. and Dobatkina, TV. (2017) 'Advanced Aluminum Alloys Containing Scandium'. Routledge.
Que, Z., Zhongyun, F., Wang, Y. and Jiang, B. (2017) 'Structural and compositional templating for heterogeneous nucleation'.Proceedings of the 6th Decennial International Conference on Solidification. Windsor.
Lebon, GSB., Tzanakis, I., Djambazov, G., Pericleous, K. and Eskin, DG. (2017) 'Numerical modelling of ultrasonic waves in a bubbly Newtonian liquid using a high-order acoustic cavitation model'. Ultrasonics Sonochemistry, 37. pp. 660 - 668. ISSN: 1350-4177 Open Access Link
Dinsdale, AT., Fang, C., Fan, Z. and Khvan, ZV. (2017) 'The critical assessment of data for Al-Fe based intermetallic phases formed during solidification of aluminium alloys'.Solidification Processing 17. Old Windsor. 1 - 28 July.Open Access Link
Fang, C., Men, H. and Fan, Z. (2017) 'Effect of substrate chemistry on prenucleation by ab initio MD simulation'.6th Decennial International Conference on Solidification Processing. Beaumont Estate, Old Windsor, UK. Sp-17. pp. 53 - 56. ISSN: 1386-1425 Open Access Link
Gao, F., Assadi, H. and Fan, Z. (2017) 'A Phase-field Study of Grain Refinement: Role of Number Density of Inoculant Particles'.6th Decennial International Conference on Solidification Processing, SP17. Windsor, UK. 1 - 28 July. 9781908549297.Open Access Link
Lazaro Nebreda, J., Patel, J., Stone, I., Scamans, GM. and Fan, Z. (2017) 'De-ironing of Aluminium alloy scrap by high shear melt conditioning technology'.6th Decennial International Conference on Solidification Processing SP17. Windsor, UK. 1 - 28 July. Solidification Processing 2017: Proceedings of the 6th Decennial International Conference on Solidification Processing. pp. 601 - 604.Open Access Link
Sree Manu, KM., Arun Kumar, S., Rajan, TPD., Riyas Mohammed, M. and Pai, BC. (2017) 'Effect of alumina nanoparticle on strengthening of Al-Si alloy through dendrite refinement, interfacial bonding and dislocation bowing'. Journal of Alloys and Compounds, 712. pp. 394 - 405. ISSN: 0925-8388
Shi, J., Hou, L., Zuo, J., Zhuang, L. and Zhang, J. (2017) 'Cryogenic rolling-enhanced mechanical properties and microstructural evolution of 5052 Al-Mg alloy'. Materials Science and Engineering: A, 701. pp. 274 - 284. ISSN: 0921-5093
Li, HT., Zhao, P., Yang, R., Patel, JB., Chen, X. and Fan, Z. (2017) 'Grain Refinement and Improvement of Solidification Defects in Direct-Chill Cast Billets of A4032 Alloy by Melt Conditioning'. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 48 (5). pp. 2481 - 2492. ISSN: 1073-5615 Open Access Link
Basak, CB. and Nadendla, H-B. (Accepted) 'Influence of Cu on modifying the beta phase and enhancing the mechanical properties of recycled Al-Si-Fe cast alloys Dataset'. .
Yang, X., Wang, F. and Fan, Z. (2017) 'Crystallographic study of nucleation in SiC particulate reinforced magnesium matrix composite'. Journal of Alloys and Compounds, 706. pp. 430 - 437. ISSN: 0925-8388
Shi, J-T., Hou, L-G., Zuo, J-R., Zhuang, L-Z. and Zhang, J-S. (2017) 'Effect of cryogenic rolling and annealing on the microstructure evolution and mechanical properties of 304 stainless steel'. International Journal of Minerals, Metallurgy, and Materials, 24 (6). pp. 638 - 645. ISSN: 1674-4799
Lazaro Nebreda, J., Patel, J. and Fan, Z. (2017) 'Efficient de-gassing of Aluminium alloy melts by high shear melt conditioning technology'.6th Decennial International Conference on Solidification Processing SP17. Beaumont Estate, Old Windsor, UK. SP17 Conference Proceedings. pp. 597 - 600.
Zuo, J., Hou, L., Shi, J., Cui, H., Zhuang, L. and Zhang, J. (2017) 'Effect of deformation induced precipitation on dynamic aging process and improvement of mechanical/corrosion properties AA7055 aluminum alloy'. Journal of Alloys and Compounds, 708. pp. 1131 - 1140. ISSN: 0925-8388
Biswas, P., Sen, D., Mazumder, S., Melo, JS., Basak, CB. and Dasgupta, K. (2017) 'Porous nano-structured micro-granules from silica-milk bi-colloidal suspension: Synthesis and characterization'. Colloids and Surfaces B: Biointerfaces, 154. pp. 421 - 428. ISSN: 0927-7765
Sadeghi, F., Kermanpur, A., Heydari, D. and Bahmani, M. (2017) 'Effect of withdrawal rate transition on microstructural features of a single crystal Ni‐based superalloy'. Crystal Research and Technology, 52 (6). ISSN: 0232-1300
Darvishi, S., Souissi, M., Karimzadeh, F., Kharaziha, M., Sahara, R. and Ahadian, S. (2017) 'Ni nanoparticle-decorated reduced graphene oxide for non-enzymatic glucose sensing: An experimental and modeling study'. Electrochimica Acta, 240. pp. 388 - 398. ISSN: 0013-4686
Ji, S., Yang, H., Cui, X. and Fan, Z. (2017) 'Macro-heterogeneities in microstructures, concentrations, defects and tensile properties of die cast Al–Mg–Si alloys'. Materials Science and Technology (United Kingdom), 33 (18). pp. 2223 - 2233. ISSN: 0267-0836 Open Access Link
Liu, G., Ji, S., Grechcini, L., Bentley, A. and Fan, Z. (2017) 'Microstructure and mechanical properties of Sn–Cu alloys for detonating and explosive cords'. Materials Science and Technology (United Kingdom), 33 (16). pp. 1907 - 1918. ISSN: 0267-0836 Open Access Link
Wang, G., Dargusch, MS., Eskin, DG. and StJohn, DH. (2017) 'Identifying the Stages during Ultrasonic Processing that Reduce the Grain Size of Aluminum with Added Al3Ti1B Master Alloy'. Advanced Engineering Materials, 19 (8). pp. 1 - 6. ISSN: 1438-1656 Open Access Link
Pawar, S., Slater, TJA., Burnett, TL., Zhou, X., Scamans, GM., Fan, Z., et al. (2017) 'Crystallographic effects on the corrosion of twin roll cast AZ31 Mg alloy sheet'. Acta Materialia, 133. pp. 90 - 99. ISSN: 1359-6454
Mingo, B., Arrabal, R., Mohedano, M., Mendis, CL., del Olmo, R., Matykina, E., et al. (2017) 'Corrosion of Mg-9Al alloy with minor alloying elements (Mn, Nd, Ca, Y and Sn)'. MATERIALS & DESIGN, 130. pp. 48 - 58. ISSN: 0264-1275 Open Access Link
Al-Helal, K., Thomas, PM. and Fan, Z. (2017) 'Design and Development of Continuous Melt-Conditioned Twin Roll Casting Process for Aluminium Alloys'.6th Decennial International Conference on Solidification Processing SP17. Old Windsor, UK. Proceeding of 6th Decennial International Conference on Solidification Processing SP17. pp. 671 - 674.Open Access Link
Al-Helal, K., Stone, I. and Fan, Z. (2017) 'Effect of Solidification Rate on Macro-segregation and Morphologies of Silicon phases in Solidification of Al-15Si Alloy'.6th Decennial International Conference on Solidification Processing SP17. Old Windsore, UK. 9 - 28 July. Proceedings of the 6th Decennial International Conference of Solidification Processing SP17. pp. 517 - 520.Open Access Link
Kitano, Y., Yuasa, M., Miyamoto, H., Farshidi, MH. and Bagherpour, E. (2017) 'Improving hydro-formability of stainless steel tubes by tube channel pressing'.7th International Conference on Nanomaterials by Severe Plastic Deformation. Sydney, Australia. 8 - 7 July. IOP Publishing. pp. 1 - 6. ISSN: 1757-8981 Open Access Link
Scamans, G. (2017) 'GALM: Advanced multi-material designs and weight reduction solutions new aston martin features extrusion intensive tub'. Light Metal Age, 75 (3). pp. 16 - 20. ISSN: 0024-3345
Carp, O., Tirsoaga, A., Ene, R., Ianculescu, A., Negrea, RF., Chesler, P., et al. (2017) 'Facile, high yield ultrasound mediated protocol for ZnO hierarchical structures synthesis: Formation mechanism, optical and photocatalytic properties'. Ultrasonics Sonochemistry, 36. pp. 326 - 335. ISSN: 1350-4177
Wang, F., Eskin, D., Connolley, T. and Mi, J. (2017) 'Influence of ultrasonic treatment on the formation of primary Al3Zr in an Al-0.4 Zr alloy'. Transactions of Nonferrous Metals Society of China, 27 (5). pp. 977 - 985. ISSN: 1003-6326 Open Access Link
Han, M., Zhu, X., Gao, T. and Liu, X. (2017) 'Revealing the roles of Al4C3 and Al8Mn5 during α-Mg nucleation in Mg-Al based alloys'. Journal of Alloys and Compounds, 705. pp. 14 - 21. ISSN: 0925-8388
Bozoni, L. and Hari Babu, N. (2017) 'Considerations on the effect of solutal on the grain size of castings from superheated melts'. Materials Letters, 201. pp. 9 - 12. ISSN: 0167-577X Open Access Link
Kim, YM., Mendis, C., Sasaski, T., Letzig, D., Pyczak, F., Hono, K. and et al. (2017) 'Static recrystallization behaviour of cold rolled Mg-Zn-Y alloy and role of solute segregation in microstructure evolution'. Scripta Materialia, 136. pp. 41 - 45. ISSN: 1359-6462 Open Access Link
Tong, M., Patel, JB., Stone, I., Fan, Z. and Browne, DJ. (2017) 'Identification of key liquid metal flow features in the physical conditioning of molten aluminium alloy with high shear processing'. Computational Materials Science, 131. pp. 35 - 43. ISSN: 0927-0256 Open Access Link
Peng, GS., Wang, Y., Chen, KH. and Chen, SY. (2017) 'Improved Zr grain refining efficiency for commercial purity Mg via intensive melt shearing'. International Journal of Cast Metals Research, 30 (6). pp. 1 - 5. ISSN: 1364-0461
Wang, F., Tzanakis, I., Eskin, D., Mi, J. and Connolley, T. (2017) 'In-situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys'. Ultrasonics Sonochemistry, 39. pp. 66 - 76. ISSN: 1350-4177 Open Access Link
Patel, JB., Yang, X., Mendis, CL. and Fan, Z. (2017) 'Melt Conditioning of Light Metals by Application of High Shear for Improved Microstructure and Defect Control'. JOM, 69 (6). pp. 1071 - 1076. ISSN: 1047-4838 Open Access Link
Ravel, B., Kim, Y-I., Woodward, PM. and Fang, CM. (Accepted)
'Role of local disorder in the dielectric response of
Kudryashova, OB., Eskin, D., Khrustalyov, AP. and Vorozhtsov, SA. (2017) 'Ultrasonic Effect on the Penetration of the Metallic Melt into Submicron Particles and Their Agglomerates'. Russian Journal of Non-Ferrous Metals, 58 (4). pp. 427 - 433. ISSN: 1067-8212 Open Access Link
Dybalska, A., Eskin, D. and Patel, JB. (2017) 'Evaluation of Shearing Time Sufficient for Effective Liquid Metal Processing'. JOM Journal of the Minerals, Metals and Materials Society, 69 (4). pp. 720 - 724. ISSN: 1047-4838 Open Access Link
Li, H., Ma, H., Hou, L., Guo, M. and He, Z. (2017) 'Shield-like tile and its application to the decagonal quasicrystal-related structures in Al-Cr-Fe-Si alloys'. Journal of Alloys and Compounds, 701. pp. 494 - 498. ISSN: 0925-8388