Eskin DG., Zuidema, J., Savran, VI. and Katgerman, L. (2004) 'Effect of process parameters on structure formation during direct-chill casting of an Al-Cu alloy'.Aluminium Alloys: Their Physical and Mechanical Properties, ICAA9. Brisbane. Institute of Materials Engineering Australasia Ltd. pp. 487 - 493.

El Mubarek, HAWA., Wang, Y., Bonar, JM., Hemment, P. and Ashburn, P. (2004) 'The Effect of Fluorine Implantation on Boron Diffusion in Metastable Si_0.86 Ge_0.14'. Springer Science and Business Media LLC. pp. 375 - 380. ISSN: 0272-9172

Robson, JD., McKay, B. and Heason, CP. (2004) 'Modelling Dispersoid Precipitation and Recrystallization in Scandium and Zirconium Containing Aluminium Alloys'.Proc. 9th International Conference on Aluminium Alloys (ICAA9). Brisbane.

Ambat, R., Davenport, AJ., Afseth, A. and Scamans, G. (2004) 'Electrochemical Behavior of the Active Surface Layer on Rolled Aluminum Alloy Sheet'. Journal of The Electrochemical Society, 151 (2). pp. B53 - B53. ISSN: 0013-4651

NADENDLA., Reddy, E.S., Cardwell, D.A. and Campbell, A.M. (2003) 'Artificial flux pinning centers in large, single grain (RE)-Ba-Cu-O superconductors'. Applied Physics Letters, 83 (23). pp. 4806 - 4808. ISSN: 0003-6951

Huang, Y. and Humphreys, FJ. (2003) 'The pinning of grain boundaries during the recrystallization of an Al-0.3Mn-0.15Si alloy'. Materials Science Forum, 426-432. pp. 501 - 506. ISSN: 0255-5476

Kunz, VD., De Groot, CH., Anteney, IM., Abdul-Rahim, AI., Hall, S., Hemment, PLF., Wang, Y. and Ashburn, P. et al. (2003) 'Modelling of gain control in SiGe HBTs and Si bipolar transistors by Ge incorporation in the polysilicon emitter'. 2003 Nanotechnology Conference and Trade Show Nanotech 2003. pp. 16 - 19.

Warrender, TE., Aspinwall, DK., Dewes, RC., Simao, JMT., Aspinwall, EM. and Scamans, G. (2003) 'Difficulties in characterising roll surfaces'. Laser Metrology and Machine Performance Vi. pp. 55 - 64.

Katgerman, L., Eskin, DG., Venneker, BCH., Zuidema, J. and Suyitno. (2003) 'Experimental description and process simulation of direct chill (DC) casting of aluminum alloys'. Proceedings of the Australian Asian Pacific Conference on Aluminium Cast House Technology. pp. 243 - 257.

Rappaz, M., Drezet, JM., Grasso, PD. and Jacot, A. (2003) 'Hot tearing and coalescence: Two deeply-connected phenomena'.10th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. DESTIN, FL. 3 - 30 May. MINERALS, METALS & MATERIALS SOC. pp. 53 - 60.

Jacot, A., Du, Q. and Rappaz, M. (2003) 'A 2-dimensional microsegregation model coupled to a thermodynamic database for the prediction of solidification microstructures in multi-component alloys'.10th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. DESTIN, FL. 3 - 30 May. MINERALS, METALS & MATERIALS SOC. pp. 229 - 236.

Kambara, M., Babu, NH., Cardwell, DA. and Campbell, AM. (2003) 'Solidification path of Y_xNd_1 x+yBa_2 yCu₃O₆₊ superconducting composites'. Superconductor Science and Technology, 16 (11). pp. 1286 - 1293. ISSN: 0953-2048

Fang, CM. and Metselaar, R. (2003) 'First–Principles Calculations of Microdomain Models for β–Sialon Si₅AlON₇'. Journal of the American Ceramic Society, 86 (11). pp. 1956 - 1958. ISSN: 0002-7820

Diko, P., Zmorayová, K., Hari Babu, N. and Cardwell, DA. (2003) 'Shape change during solidification of bulk, single grain Y–Ba–Cu–O samples fabricated by top seeded melt growth'. Physica C: Superconductivity, 398 (1-2). pp. 1 - 7. ISSN: 0921-4534

Reddy, ES., Babu, NH., Shi, Y., Cardwell, DA. and Schmitz, GJ. (2003) 'Processing of single domain Y–Ba–Cu–O with pre-defined 3D interconnected porosity for bulk reinforcement'. Superconductor Science and Technology, 16 (11). pp. L40 - L43. ISSN: 0953-2048

Babu, NH., Reddy, ES., Cardwell, DA. and Campbell, AM. (2003) 'New chemically stable, nano-size artificial flux pinning centres in (RE)–Ba–Cu–O superconductors'. Superconductor Science and Technology, 16 (11). pp. L44 - L45. ISSN: 0953-2048

NADENDLA., Cardwell, D.A., Kambara, M. and Shi, Y. (2003) 'The chemical composition of uranium-containing phase particles in U-doped YBCO melt-processed superconductor'. Physica C: Superconductivity, 392-396 (Part 1). pp. 110 - 115. ISSN: 0921-4534

VANBOGGELEN, J., ESKIN, D. and KATGERMAN, L. (2003) 'First stages of grain coarsening in semi-solid Al?Cu alloys'. Scripta Materialia, 49 (7). pp. 717 - 722. ISSN: 1359-6462

Basak, CB., Sengupta, AK. and Kamath, HS. (2003) 'Classical molecular dynamics simulation of UO2 to predict thermophysical properties'. Journal of Alloys and Compounds, 360 (1-2). pp. 210 - 216. ISSN: 0925-8388

Fang, CM., Kools, F., Metselaar, R., With, GD. and Groot, RAD. (2003) 'Magnetic and electronic properties of strontium hexaferrite SrFe₁₂O₁₉from first-principles calculations'. Journal of Physics: Condensed Matter, 15 (36). pp. 6229 - 6237. ISSN: 0953-8984

Assadi, H., Gartner, F., Stoltenhoff, T. and Kreye, H. (2003) 'Bonding mechanism in cold gas spraying'. ACTA MATERIALIA, 51 (15). pp. 4379 - 4394. ISSN: 1359-6454

Assadi, H., Gärtner, F., Stoltenhoff, T. and Kreye, H. (2003) 'Bonding mechanism in cold gas spraying'. Acta Materialia, 51 (15). pp. 4379 - 4394. ISSN: 1359-6454

Bischoff, MMJ., Fang, CM., de Groot, RA., Heijnen, GMM., Katsnelson, MI., Kolesnychenko, OY., de Kort, R., Lichtenstein, AI., Quinn, AJ., Vasquez de Parma, AL., Yamada, TK. and van Kempen, H. et al. (2003) 'Scanning Tunneling Spectroscopy Study of Surface States of 3d Metals: Chemical Identification, Magnetic Contrast and Orbital Kondo Resonance States'. Acta Physica Polonica A, 104 (3-4). pp. 231 - 243. ISSN: 0587-4246

Smit, MA., Hunter, JA., Sharman, JDB., Scamans, GM. and Sykes, JM. (2003) 'Effect of organic additives on the performance of titanium-based conversion coatings'. Corrosion Science, 45 (9). pp. 1903 - 1920. ISSN: 0010-938X

Gennaro, S., Collart, E., Wang, Y., Sealy, BJ. and Gwilliam, RM. (2003) 'Indium clustering in a silicon matrix in the presence of carbon co-implantation'. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 209. pp. 136 - 139. ISSN: 0168-583X

Zhou, X., Thompson, GE. and Scamans, GM. (2003) 'The influence of surface treatment on filiform corrosion resistance of painted aluminium alloy sheet'. Corrosion Science, 45 (8). pp. 1767 - 1777. ISSN: 0010-938X

Huang, Y. and Humphreys, FJ. (2003) 'In situ observations of microstructural evolution during deformation of Supral 100'.International Conference on Superplasticity of Advanced Materials. Oxford, UK. 28 - 30 July. Trans Tech Publications, Ltd.. pp. 381 - 386. ISSN: 0255-5476

Mendis, C., Bourgeois, L., Muddle, B. and Nie, JF. (2003) 'Effects of Ca additions on microstructures, age hardening response and creep behaviour of Mg-8Zn-4Al casting alloy'.Symposium on Magnesium Technology 2003 held at the 2003 TMS Annual Meeting. SAN DIEGO, CA. 21 - 6 March. MINERALS, METALS & MATERIALS SOC. pp. 183 - 188.

Huang, Y. (2003) 'The pinning of grain boundaries during the recrystallization of an Al-0.3Mn-0.15Si alloy'.Thermec’2003, Inter Conf. on Processing and Manufacturing of Advanced Materials. Madrid, Spain. 7 - 11 July. Trans Tech Publications, Ltd.. pp. 501 - 506. ISSN: 0255-5476

Men, H. and Kim, DH. (2003) 'Fabrication of ternary Mg–Cu–Gd bulk metallic glass with high glass-forming ability under air atmosphere'. Journal of Materials Research, 18 (7). pp. 1502 - 1504. ISSN: 0884-2914

Uzunsoy, D., Chang, ITH. and Bowen, P. (2003) 'Fracture behaviour of selective laser sintered Rapidsteel 2.0 under static and dynamic loading'. Materials Science and Technology, 19 (7). pp. 897 - 901. ISSN: 0267-0836

Borchers, C., Gärtner, F., Stoltenhoff, T., Assadi, H. and Kreye, H. (2003) 'Microstructural and macroscopic properties of cold sprayed copper coatings'. Journal of Applied Physics, 93 (12). pp. 10064 - 10070. ISSN: 0021-8979

Hari Babu, N., Cardwell, DA., Tarrant, CD. and Schneider, KR. (2003) 'U-doped Y-Ba-Cu-O melt-processed superconductor'. Tsinghua Science and Technology, 8 (3). pp. 242 - 250. ISSN: 1007-0214

Babu, NH., Kambara, M., Shi, Y., Cardwell, DA., Tarrant, CD. and Schneider, KR. (2003) 'Development of the microstructure of uranium-doped Nd-Ba-Cu-O'. IEEE Transactions on Appiled Superconductivity, 13 (2). pp. 3147 - 3150. ISSN: 1051-8223

Vanderbemden, P., Dorbolo, S., Hari-Babu, N., Ntatsis, A., Cardwell, DA. and Campbell, AM. (2003) 'Behavior of bulk melt-textured YBCO single domains subjected to crossed magnetic fields'. IEEE Transactions on Appiled Superconductivity, 13 (2). pp. 3746 - 3749. ISSN: 1051-8223

Kunz, VD., Uchino, T., de Groot, CH., Ashburn, P., Donaghy, DC., Hall, S., Yun Wang. and Hemment, PLF. et al. (2003) 'Reduction of parasitic capacitance in vertical mosfets by spacer local oxidation'. IEEE Transactions on Electron Devices, 50 (6). pp. 1487 - 1493. ISSN: 0018-9383

Fang, CM., de Wijs, GA., Hintzen, HT. and de With, G. (2003) 'Phonon spectrum and thermal properties of cubic Si3N4 from first-principles calculations'. Journal of Applied Physics, 93 (9). pp. 5175 - 5180. ISSN: 0021-8979

El Mubarek, HAW., Bonar, JM., Ashburn, P., Wang, Y., Hemment, P., Buiu, O. and Hall, S. et al. (2003) 'Non-selective growth of SiGe heterojunction bipolar trasistor layers at 700 °C with dual control of n- and p-type dopant profiles'. Journal of Materials Science: Materials in Electronics, 14 (5-7). pp. 261 - 265. ISSN: 0957-4522

Huang, Y. and Humphreys, FJ. (2003) 'Reconstruction of grains and subgrains from EBSD orientation maps'.RMS EBSD Symposium 2003. Swansea, UK. 5 - 6 April. [unpublished]

Ji, S. (2003) 'The fragmentation of primary dendrites during shearing in semisolid processing'. Journal of Materials Science, 38 (7). pp. 1559 - 1564. ISSN: 0022-2461

Sareen, A., Wang, Y., Södervall, U., Lundgren, P. and Bengtsson, S. (2003) 'Effect of Si cap layer on parasitic channel operation in Si/SiGe metal–oxide–semiconductor structures'. Journal of Applied Physics, 93 (6). pp. 3545 - 3552. ISSN: 0021-8979

Van Boggelen, JWK., Eskin, DG. and Katgerman, L. (2003) 'Permeability of the mushy zone in aluminum alloys: Evaluation of different approaches'.Light Metals Symposium held at the 132nd TMS Annual Meeting. SAN DIEGO, CA. 2 - 6 March. MINERALS, METALS & MATERIALS SOC. pp. 759 - 766. ISSN: 0147-0809

Fang, CM., Ramanujachary, KV., Hintzen, HT. and de With, G. (2003) 'Electronic structure of magnesium nitride-fluorides from first-principles calculations'. Journal of Alloys and Compounds, 351 (1-2). pp. 72 - 76. ISSN: 0925-8388

Hintzen, HT., Hendrix, MRMM., Wondergem, H., Fang, CM., Sekine, T. and de With, G. (2003) 'Thermal expansion of cubic Si3N4 with the spinel structure'. Journal of Alloys and Compounds, 351 (1-2). pp. 40 - 42. ISSN: 0925-8388

Rappaz, M., Jacot, A. and Boettinger, WJ. (2003) 'Last-stage solidification of alloys: Theoretical model of dendrite-arm and grain coalescence'. Metallurgical and Materials Transactions A, 34 (3). pp. 467 - 479. ISSN: 1073-5623

Fang, CM. and Metselaar, R. (2003) 'Site preferences in β-sialon from first-principles calculations'. Journal of Materials Chemistry, 13 (2). pp. 335 - 337. ISSN: 0959-9428

Fang, CM., de Wijs, GA., Orhan, E., de With, G., de Groot, RA., Hintzen, HT. and Marchand, R. et al. (2003) 'Local structure and electronic properties of BaTaO2N with perovskite-type structure'. Journal of Physics and Chemistry of Solids, 64 (2). pp. 281 - 286. ISSN: 0022-3697

Das, A. and Fan, Z. (2003) 'Morphological development of solidification structures under forced fluid flow: experimental observation'. Materials Science and Technology, 19 (5). pp. 573 - 580. ISSN: 0267-0836

Fang, X., Fan, Z., Ralph, B., Evans, P. and Underhill, R. (2003) 'The relationships between tensile properties and hole expansion property of C-Mn steels'. Journal of Materials Science, 38 (18). pp. 3877 - 3882. ISSN: 0022-2461

Tang, H., Wrobel, LC. and Fan, Z. (2003) 'Fluid flow aspects of twin-screw extruder process: numerical simulations of TSE rheomixing'. Modelling and Simulation in Materials Science and Engineering, 11 (5). pp. 771 - 790. ISSN: 0965-0393

Fang, X., Fan, Z., Ralph, B., Evans, P. and Underhill, R. (2003) 'Effects of tempering temperature on tensile and hole expansion properties of a C-Mn steel'. Journal of Materials Processing Technology, 132 (1-3). pp. 215 - 218. ISSN: 0924-0136