Turchin, AN., Eskin, DG. and Katgerman, L. (Accepted) 'Unsteady-State Solidification under Forced Flow Conditions', inMaterials Science Forum. Trans Tech Publications Ltd.. pp. 991 - 994.

Eskin, DG. and Katgerman, L. (Accepted) 'Effect of Structure on Hot Tearing Properties of Aluminum Alloys', inMaterials Science Forum. Trans Tech Publications Ltd.. pp. 995 - 998.

Belov, NA., Cheverikin, VV., Eskin, DG. and Turchin, AN. (Accepted) 'Effect of Al₃Ni and Mg₂Si Eutectic Phases on Casting Properties and Hardening of an Al-7% Zn-3% Mg Alloy', inMaterials Science Forum. Trans Tech Publications Ltd.. pp. 413 - 418. ISBN 10: 0878494081.

Bian, Z., Bayandorian, I., Zhang, HW., Scamans, G. and Fan, Z. (2009) 'Extremely fine and uniform microstructure of magnesium AZ91D alloy sheets produced by melt conditioned twin roll casting'. Materials Science and Technology, 25 (5). pp. 599 - 606. ISSN: 0267-0836

Awang Kechik, MM., Mikheenko, P., Sarkar, A., Dang, VS., Babu, NH., Cardwell, DA., Abell, JS. and Crisan, A. et al. (2009) 'Artificial pinning centres in YBa2Cu3O7-δ thin films by Gd2Ba4CuWOy nanophase inclusions'. Superconductor Science and Technology, 22 (3). pp. 034020 - 034020. ISSN: 0953-2048

Koblischka, MR., Winter, M., Das, P., Koblischka-Veneva, A., Muralidhar, M., Wolf, T., Babu, NH., Turner, S., van Tendeloo, G. and Hartmann, U. et al. (2009) 'Observation of nanostripes and -clusters in (Nd, EuGd)Ba2Cu3Ox superconductors'. Physica C: Superconductivity, 469 (4). pp. 168 - 176. ISSN: 0921-4534

Yeoh, WK., Pathak, SK., Shi, YH., Dennis, AR., Cardwell, DA., Babu, NH., Iida, K. and Strasik, M. et al. (2009) 'Control of Y2BaCuO5 particle formation in bulk, single grain Y-Ba-Cu-O'. Superconductor Science and Technology, 22 (6). pp. 065011 - 065011. ISSN: 0953-2048

Shi, YH., Babu, NH., Iida, K. and Cardwell, DA. (2009) 'The effect of very high barium content in the precursor on the properties of GdBCO single grain bulk superconductors'. Journal of Materials Research, 24 (1). pp. 10 - 18. ISSN: 0884-2914

Shi, Y., Babu, NH., Iida, K., Yeoh, WK., Dennis, AR. and Cardwell, DA. (2009) 'The influence of Gd-2411(Nb) on the superconducting properties of GdBCO/Ag single grains'. Superconductor Science and Technology, 22 (7). pp. 075025 - 075025. ISSN: 0953-2048

Yeoh, WK., Pathak, SK., Shi, Y., Dennis, AR., Cardwell, DA., Babu, NH. and Strasik, M. et al. (2009) 'Improved flux pinning in Y-Ba-Cu-O superconductors containing niobium oxide'. IEEE Transactions on Applied Superconductivity, 19 (3). pp. 2970 - 2973. ISSN: 1051-8223

Pathak, SK., Yeoh, WK., Babu, NH., Shi, Y., Iida, K., Strasik, M. and Cardwell, DA. et al. (2009) 'Fabrication of high performance Y-123/Y-24Nb1/Ag single grain composites'. Physica C: Superconductivity, 469 (15-20). pp. 1173 - 1177. ISSN: 0921-4534

Cardwell, DA., Shi, Y., Babu, NH. and Iida, K. (2009) 'Fabrication of high performance Gd-Ba-Cu-O single grains in air using a practical melt processing technique'. Physica C: Superconductivity, 469 (15-20). pp. 1146 - 1152. ISSN: 0921-4534

Pathak, SK., Babu, NH., Iida, K., Strasik, M. and Cardwell, D. (2009) 'Processing and properties of large grain Y-Ba-Cu-O containing Y2Ba4CuWOy and Ag second phase inclusions'. Journal of Applied Physics, 106 (6). ISSN: 0021-8979

Kotadia, HR., Doernberg, E., Patel, JB., Fan, Z. and Schmid-Fetzer, R. (2009) 'Solidification of Al-Sn-Cu based immiscible alloys under intense shearing'. Metallurgical and Materials Transactions A, 40 (9). pp. 2202 - 2211. ISSN: 1073-5623 Open Access Link

Cole, M. (2009) 'Using Wiki technology to support student engagement: lessons from the trenches'. Computers and Education, 52 (1). pp. 141 - 146. ISSN: 0360-1315

Galano, M., Audebert, F., Garcia Escorial, A., Stone, IC. and Cantor, B. (2009) 'Nanoquasicrystalline Al-Fe-Cr-based alloys. Part II: Mechanical properties'. Acta Materialia, 57 (17). pp. 5120 - 5130. ISSN: 1359-6454

Fan, Z., Wang, Y., Xia, M. and Arumuganathar, S. (2009) 'Enhanced heterogeneous nucleation in AZ91D alloy by intensive melt shearing'. Acta Materialia, 57 (16). pp. 4891 - 4901. ISSN: 1359-6454

Fan, Z., Wang, Y., Zhang, ZF., Xia, M., Li, HT., Xu, J., Granasy, L. and Scamans, GM. et al. (2009) 'Shear enhanced heterogeneous nucleation in some Mg- and Al-alloys'. International Journal of Cast Metals Research, 22 (1-4). pp. 318 - 322. ISSN: 1364-0461 Open Access Link

Kotadia, HR., Patel, JB., Fan, Z., Doernberg, E. and Schmid-Fetzer, R. (2009) 'Solidification and processing of aluminium based immiscible alloys', in Yin, W., Das, SK. and Long, Z. (eds.) Aluminum Alloys: Fabrication, Characterization and Applications II. TMS - The Minerals, Metals and Materials Society. pp. 81 - 86. ISBN 13: 978-0-87339-735-3. Open Access Link

Ji, S. and Fan, Z. (2009) 'Solidification behavior and microstructural evolution of near-eutectic Zn-Al alloys under intensive shear'. Metallurgical and Materials Transactions A, 40 (1). pp. 185 - 195. ISSN: 1073-5623 Open Access Link

Barekar, NS., Tzamtzis, S., Hari Babu, N., Fan, Z. and Dhindaw, BK. (2009) 'Processing of ultrafine-size particulate metal matrix composites by advanced shear technology'. Metallurgical and Materials Transactions A, 40 (3). pp. 691 - 701. ISSN: 1073-5623 Open Access Link

Tzamtzis, S., Barekar, NS., Hari Babu, N., Patel, J., Dhindaw, BK. and Fan, Z. (2009) 'Processing of advanced Al/SiC particulate metal matrix composites under intensive shearing - a novel Rheo-process'. Composites Part A: Applied Science and Manufacturing, 40 (2). pp. 144 - 151. ISSN: 1359-835X Open Access Link

Fan, Z., Xia, M., Zhang, H., Liu, G., Patel, JB., Bian, Z., Bayandorian, I., Wang, Y., Li, HT. and Scamans, GM. et al. (2009) 'Melt conditioning by advanced shear technology (MCAST) for refining solidification microstructures'. International Journal of Cast Metals Research, 22 (1-4). pp. 103 - 107. ISSN: 1364-0461 Open Access Link

Zaffaina, L., Alain, R., Bonollo, F. and Fan, Z. (2009) 'New challenges and directions for high pressure die-cast magnesium'. La Metallurgia Italiana, March 2009 (3). pp. 25 - 29. ISSN: 0026-0843

Galano, M., Audebert, F., Stone, IC. and Cantor, B. (2009) 'Nanoquasicrystalline Al-Fe-Cr-based alloys. Part I: Phase transformations'. Acta Materialia, 57 (17). pp. 5107 - 5119. ISSN: 1359-6454

Schumacher, P., McKay, BJ., Eck, S. and Ludwig, A. (2009) 'International Journal of Cast Metals Research'. Maney Publishing.

Singer, HM., Singer, I. and Jacot, A. (2009) 'Phase-field simulations of α→γ precipitations and transition to massive transformation in the Ti–Al alloy'. Acta Materialia, 57 (1). pp. 116 - 124. ISSN: 1359-6454

BOEHM‐COURJAULT, E., GONZALES, F., JACOT, A., KOHLER, F., MARIAUX, A., NIEDERBERGER, C., SALGADO‐ORDORICA, MA. and RAPPAZ, M. et al. (2009) 'EBSD: a powerful microstructure analysis technique in the field of solidification'. Journal of Microscopy, 233 (1). pp. 160 - 169. ISSN: 0022-2720

Vlachos, N. and Chang, ITH. (2009) 'Optimization of metal powder-mixing parameters for chemical homogeneity and agglomeration'. International Journal of Powder Metallurgy Princeton New Jersey, 45 (1). pp. 19 - 28. ISSN: 0888-7462

Kim, J., Jiang, K. and Chang, IT. (2009) 'Net‐Shape Alumina Microcomponents by Conversion of Al Powder'. Advanced Engineering Materials, 11 (1-2). pp. 106 - 110. ISSN: 1438-1656

Vlachos, N. and Chang, ITH. (2009) 'Effect of axial and radial metal powder mixing on chemical homogeneity and agglomeration'. International Journal of Powder Metallurgy Princeton New Jersey, 45 (1). pp. 29 - 37. ISSN: 0888-7462

Namahoot, J., Davenport, A., Ambat, R., Afseth, A. and Scamans, GM. (2008) 'Effect of Equal Channel Angular Extrusion on Corrosion Behavior of Al-Mn ALLOY'. The Electrochemical Society. pp. 105 - 113. ISSN: 1938-5862

Lalpoor, M., Eskin, DG. and Katgerman, L. (2008) 'Fracture behavior and mechanical properties of high strength aluminum alloys in the as-cast condition'. Materials Science and Engineering: A, 497 (1-2). pp. 186 - 194. ISSN: 0921-5093

Huang, Y. and Prangnell, PB. (2008) 'Orientation splitting and its contribution to grain refinement during equal channel angular extrusion'. Journal of Materials Science, 43 (23-24). pp. 7273 - 7279. ISSN: 0022-2461

Prangnell, PB. and Huang, Y. (2008) 'The effect of cryogenic deformation on the limiting grain size in an SMG Al-alloy'. Journal of Materials Science, 43 (23-24). pp. 7280 - 7285. ISSN: 0022-2461

Vlachos, N. and Chang, ITH. (2008) 'Taguchi optimization of the distribution and agglomeration of nickel powder (t123 & t110) in blended fe-ni powder mixture'. Advances in Powder Metallurgy and Particulate Materials 2008 Proceedings of the 2008 World Congress on Powder Metallurgy and Particulate Materials Powdermet 2008. pp. 285 - 296.

Solórzano, E., Escudero, J., Lázaro, J., Rodriguez-Perez, MA. and De Saja, XJA. (2008) 'Critical cooling velocities maps for thermal hardening treatments in aluminium foams: Density characterization, finite elements analysis, experimental validation and final results'.5th Biennial International Conference on Porous Metals and Metallic Foams (MetFoam 2007). Montreal, CANADA. 27 - 7 September. DESTECH PUBLICATIONS, INC. pp. 505 - 508.

Rostamian, A. and Jacot, A. (2008) 'A numerical model for the description of the lamellar and massive phase transformations in Ti-Al-Nb alloys'.Structural Aluminides for Elevated Temperatures Symposium held at the TMS 2008 Annual Meeting and Exhibition. New Orleans, LA. 26 - 13 March. MINERALS, METALS & MATERIALS SOC. pp. 155 - 161.

Danilidis, I., Hunter, J., Scamans, GM. and Sykes, JM. (2008) 'Effect of silica nano-particles on the performance of manganese-based conversion treatments'. Corrosion Science, 50 (11). pp. 3038 - 3046. ISSN: 0010-938X

Saeid, T., Abdollah-zadeh, A., Assadi, H. and Malek Ghaini, F. (2008) 'Effect of friction stir welding speed on the microstructure and mechanical properties of a duplex stainless steel'. Materials Science and Engineering: A, 496 (1-2). pp. 262 - 268. ISSN: 0921-5093

Imbaby, M., Jiang, K. and Chang, I. (2008) 'Net shape fabrication of stainless-steel micro machine components from metallic powder'. Journal of Micromechanics and Microengineering, 18 (11). pp. 115018 - 115018. ISSN: 0960-1317

LUO, W., FANG, CM. and AHUJA, R. (2008) 'NANOLAYERED MAX PHASES FROM ab initio CALCULATIONS'. International Journal of Modern Physics B, 22 (25n26). pp. 4495 - 4499. ISSN: 0217-9792

Pusztai, T., Tegze, G., Toth, GI., Kornyei, L., Bansel, G., Fan, Z. and Granasy, L. et al. (2008) 'Phase-field approach to polycrystalline solidification including heterogenous and homogenous nucleation'. Journal of Physics: Condensed Matter, 20 (40). ISSN: 0953-8984 Open Access Link

Eskin, DG. (2008) 'Structural factors of dendritic segregation in aluminum alloys'. Russian Journal of Non-Ferrous Metals, 49 (5). pp. 373 - 378. ISSN: 1067-8212

Li, H-T., Wang, Q., He, J-C., Guo, J-T. and Ye, H-Q. (2008) 'β-Ti(M) solid solution formation and its thermal stability in a NiAl–Cr(Mo)–(Hf,Ti) near eutectic alloy'. Materials Characterization, 59 (10). pp. 1395 - 1399. ISSN: 1044-5803

Rostamian, A. and Jacot, A. (2008) 'A numerical model for the description of the lamellar and massive phase transformations in TiAl alloys'. Intermetallics, 16 (10). pp. 1227 - 1236. ISSN: 0966-9795

Imbaby, M., Jiang, K. and Chang, I. (2008) 'Fabrication of 316-L stainless steel micro parts by softlithography and powder metallurgy'. Materials Letters, 62 (26). pp. 4213 - 4216. ISSN: 0167-577X

Atamanenko, TV., Eskin, DG. and Katgerman, L. (2008) 'Effect of isothermal ultrasonic treatment on microstructure of a model A;-4 wt% Cu alloys'.Aluminium Alloys: Their Physical and Mechanical Properties, ICAA11. Aachen. 22 - 25 September. Wiley-VCH. pp. 316 - 320.

Eskin, DG. and Katgerman, L. (2008) 'Contribution of different grain structures to macrosegregation of aluminium-alloy billets'.Aluminium Alloys: Their Physical and Mechanical Properties, ICAA11. Aachen. 22 - 25 September. Wiley-VCH. pp. 292 - 297.

Lalpoor, M., Eskin, DG. and Katgerman, L. (2008) 'Investigation of fracture behaviour of high-strength aluminium alloys in the as-cast condition'.Aluminium Alloys: Their Physical and Mechanical Properties, ICAA11. Aachen. 22 - 25 September. Wiley-VCH. pp. 1474 - 1479.

Mehrabi, K., Bruncko, M., Kneissl, AC. and McKay, BJ. (2008) 'Influence of quenching rates on equiatomic NiTi ribbons fabricated by melt-spinning'. Journal of Materials Engineering and Performance, 18 (5-6). pp. 475 - 478. ISSN: 1059-9495