BCAST
View our websiteDemirtas, H., Karakulak, E. and Nadendla, HB. (2021) 'Understanding the Effect of Ni Content on Microstructure and Mechanical Properties of A384 HPDC Alloy'. Journal of Alloys and Compounds, 896. pp. 1 - 8. ISSN: 0925-8388 Open Access Link
Zargar, T., Sadeghi, F., Kim, JW., Lee, JS., Heo, Y-U. and Yim, CH. (2021) 'Kinetic Model to Investigate the Effect of Cooling Rate on δ-Ferrite Behavior and Its Application in Continuous Casting of AISI 304 Stainless Steel'. Metals and Materials International, 28 (9). pp. 2263 - 2276. ISSN: 1598-9623
Guo, W., Cao, S., Zeng, L., Xia, M., Wang, Y. and Li, J. (2021) 'Substrate Stimulated Orientation for Pure Aluminum'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (12). pp. 5152 - 5158. ISSN: 1073-5623
Silva, JPB., Sekhar, KC., Negrea, RF., Ghica, C., Dastan, D. and Gomes, MJM. (2021)
'Ferroelectric properties of ZrO
Huang, Y. and Jiang, J. (2021) 'Microstructure and Texture Evolution during Severe Plastic Deformation at Cryogenic Temperatures in an Al-0.1Mg Alloy'. Metals, 11 (11). pp. 1 - 14.Open Access Link
Pervikov, A., Filippov, A., Mironov, Y., Kalashnikov, M., Krinitcyn, M., Eskin, D., et al. (2021) 'Microstructure and properties of a nanostructured W-31 wt% Cu composite produced by magnetic pulse compaction of bimetallic nanoparticles'. International Journal of Refractory Metals and Hard Materials, 103. pp. 105735 - 105735. ISSN: 0263-4368 Open Access Link
Tzanakis, I., Khavari, M., Titze, M. and Eskin, D. (2021) 'Cavitation in Thermoplastic Melts: New Insights into Ultrasound-Assisted Fibre-Impregnation'. Composites Part B: Engineering, 229. pp. 109480 - 109480. ISSN: 0961-9526 Open Access Link
Cao, S., Zeng, L., Xia, M., Yu, P., Xu, M., Ge, X., et al. (2021) 'Connecting short-range order for the liquid-solid transition of Al-Cu-Fe alloys'. Materials Today Communications, 29. pp. 102956 - 102956. ISSN: 2352-4928
Priyadarshi, A., Khavari, M., Bin Shahrani, S., Subroto, T., Yusuf, LA., Conte, M., et al. (2021) 'In-situ observations and acoustic measurements upon fragmentation of free-floating intermetallics under ultrasonic cavitation in water'. Ultrasonics Sonochemistry, 80. pp. 105820 - 105820. ISSN: 1350-4177 Open Access Link
Morton, JA., Eskin, DG., Grobert, N., Mi, J., Porfyrakis, K., Prentice, P. and et al. (2021) 'Effect of Temperature and Acoustic Pressure During Ultrasound Liquid-Phase Processing of Graphite in Water'. JOM, 73 (12). pp. 3745 - 3752. ISSN: 1047-4838 Open Access Link
Zhou, M., Li, Z., Assadi, H., Chang, I. and Barbatti, C. (2021) 'An accelerated three-dimensional coupled electromagnetic-mechanical model for electromagnetic pulse forming'. Journal of Manufacturing Processes, 72. pp. 240 - 251. ISSN: 1526-6125 Open Access Link
Silva, JPB., Negrea, RF., Istrate, MC., Dutta, S., Aramberri, H., Íñiguez, J., et al. (2021)
'Wake-up Free Ferroelectric Rhombohedral Phase in Epitaxially Strained ZrO
Tyurnina, AV., Morton, JA., Subroto, T., Khavari, M., Maciejewska, B., Mi, J., et al. (2021) 'Environment friendly dual-frequency ultrasonic exfoliation of few-layer graphene'. Carbon, 185. pp. 536 - 545. ISSN: 0008-6223 Open Access Link
Priyadarshi, A., Khavari, M., Subroto, T., Prentice, P., Pericleous, K., Eskin, D., et al. (2021) 'Mechanisms of ultrasonic de-agglomeration of oxides through in-situ high-speed observations and acoustic measurements'. Ultrasonics Sonochemistry, 79. pp. 1 - 12. ISSN: 1350-4177 Open Access Link
Fang, J., Dong, X. and Ji, S. (2021) 'Effect of Mn on Microstructure and Mechanical Properties of Al-4Ni Alloy'. JOM, 73 (12). pp. 3819 - 3826. ISSN: 1047-4838 Open Access Link
Kenny, J., McDonald, N., Binner, J., Chang, ITH. and Marinel, S. (2021) 'Low temperature synthesis and spark plasma sintering of a boron carbide with a low residual carbon content'. Journal of the European Ceramic Society, 42 (2). pp. 383 - 391. ISSN: 0955-2219 Open Access Link
Al-Helal, K., Lazaro Nebreda, J., Patel, J. and Scamans, G. (2021) 'High-Shear De-Gassing and De-Ironing of an Aluminum Casting Alloy Made Directly from Aluminum End-of-Life Vehicle Scrap'. Recycling (Basel), 6 (4). pp. 66 - 66.Open Access Link
Khasraw, D., Theint Htet, T., Yang, X., Degirmenci, V., Hage, H., Meijer, K. and et al. (2021) 'Gasification and structural behaviour of different carbon sources and resultant chars from rapid devolatilization for HIsarna alternative ironmaking process'. Fuel, 309. pp. 1 - 12. ISSN: 0016-2361
Yang, H., Zhu, M., Wang, J., Ma, C., Zhou, X., Xing, H., et al. (2021) 'Optimization of mechanical and antibacterial properties of Ti-3wt%Cu alloy through cold rolling and annealing'. Rare Metals, 41 (2). pp. 610 - 620. ISSN: 1001-0521 Open Access Link
Dou, K., Lordan, E., Zhang, Y., Jacot, A. and Fan, Z. (2021) 'A novel approach to optimize mechanical properties for aluminium alloy in High pressure die casting (HPDC) process combining experiment and modelling'. Journal of Materials Processing Technology, 296. pp. 1 - 13. ISSN: 0924-0136
Wang, F., Chiu, Y-L., Eskin, D., Du, W. and Shearing, PR. (2021) 'A grain refinement mechanism of cast commercial purity aluminium by vanadium'. Materials Characterization, 181. pp. 1 - 12. ISSN: 1044-5803 Open Access Link
De, R., Haque, SM., Singh, R., Basak, CB., Jena, S., Misal, JS., et al. (2021) 'Morphology-dependent optical and wetting behavior of GLAD PTFE thin films'. Journal of Coatings Technology and Research, 18 (1). pp. 173 - 182. ISSN: 1547-0091
Sadeghi, F., Zargar, T., Kim, JW., Heo, Y-U., Lee, JS. and Yim, CH. (2021) 'Role of the annealing twin boundary on the athermal α′-martensite formation in a 304 austenitic stainless steel'. Materialia, 20. pp. 1 - 12. ISSN: 2589-1529
Khan, MA., Wang, Y., Hamza, M., Yasin, G., Tabish, M., Feng, C., et al. (2021) 'Precipitation behaviour in an Al-Zn-Mg-Cu alloy subjected to high strain rate compression tests'. Materials Characterization, 180. pp. 1 - 8. ISSN: 1044-5803
Nikbakht, R., Assadi, H., Jahani, K., Saadati, M. and Jodoin, B. (2021) 'Cold spray deformation and deposition of blended feedstock powders not necessarily obey the rule of mixture'. Surface and Coatings Technology, 424. pp. 127644 - 127644. ISSN: 0257-8972
Daronde, S., Kuthe, A., Keerti, S., Khatirkar, R., Bagde, A., Kamble, M. and et al. (2021) 'The Effect of Vacuum on the Mechanical Properties of Sand Cast AA6061 Alloy'. Journal of Materials Engineering and Performance, 31 (1). pp. 262 - 271. ISSN: 1059-9495
Li, T., Davies, JMT. and Zhu, X. (2021) 'Revealing the structure and evolution of entrained oxide film in Mg–Y alloy castings'. Journal of Materials Science, 56 (29). pp. 16671 - 16685. ISSN: 0022-2461 Open Access Link
Li, T., Davies, JMT. and Zhu, X. (2021) 'Effect of carrier gases on the entrainment defects within AZ91 alloy castings'. Journal of Magnesium and Alloys, 10 (1). pp. 129 - 145. ISSN: 2213-9567 Open Access Link
Famelton, JR., Hughes, GM., Williams, CA., Barbatti, C., Moody, MP. and Bagot, PAJ. (2021) 'Xenon plasma focussed ion beam preparation of an Al-6XXX alloy sample for atom probe tomography including analysis of an α-Al(Fe,Mn)Si dispersoid'. Materials Characterization, 178. pp. 111194 - 111194. ISSN: 1044-5803
Yang, X., Gao, F., Tang, F., Hao, X. and Li, Z. (2021) 'Effect of Surface Oxides on the Melting and Solidification of 316L Stainless Steel Powder for Additive Manufacturing'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (10). pp. 4518 - 4532. ISSN: 1073-5623 Open Access Link
Zhu, X., Wang, S., Dong, X., Liu, X. and Ji, S. (2021) 'Morphologically templated nucleation of primary Si on AlP in hypereutectic Al-Si alloys'. Journal of Materials Science & Technology, 100. pp. 36 - 45. ISSN: 1005-0302 Open Access Link
Beckwith, C., Djambazov, G., Pericleous, K., Tonry, C., Priyadarshi, A., Khavari, M., et al. (2021) 'Nonlinear helmholtz modelling of acoustic cavitation in water'. Virtual. 11 - 16 July. "Advances in Acoustics, Noise and Vibration - 2021" Proceedings of the 27th International Congress on Sound and Vibration, ICSV 2021. ISSN: 2329-3675
Luan, Q., Wang, J., Huang, Y., Balint, DS. and Jiang, J. (2021) 'How would the deformation bands affect recrystallization in pure aluminium?'. Materials & Design, 209. pp. 1 - 14. ISSN: 0264-1275 Open Access Link
Rezaei, A., Kermanpur, A., Rezaeian, A., Badrossamay, M., Foroozmehr, E., Sadeghi, F., et al. (2021) 'Contribution of hot isostatic pressing on densification, microstructure evolution, and mechanical anisotropy of additively manufactured IN718 Ni-based superalloy'. Materials Science and Engineering: A, 823. pp. 1 - 15. ISSN: 0921-5093
Jabbareh, MA. and Assadi, H. (2021) 'Modelling of microstructure evolution during laser processing of intermetallic containing ni-al alloys'. Metals, 11 (7). pp. 1 - 15.Open Access Link
DU, Y-X., YANG, X-L., LI, Z-S., HAO, F., MAO, Y-C., LI, S-Q., et al. (2021) 'Shear localization behavior in hat-shaped specimen of near-α Ti−6Al−2Zr−1Mo−1V titanium alloy loaded at high strain rate'. Transactions of Nonferrous Metals Society of China, 31 (6). pp. 1641 - 1655. ISSN: 1003-6326 Open Access Link
Nikbakht, R., Saadati, M., Assadi, H., Jahani, K. and Jodoin, B. (2021) 'Dynamic microstructure evolution in cold sprayed Ni[sbnd]Ti composite coatings'. Surface and Coatings Technology, 421. pp. 1 - 10. ISSN: 0257-8972 Open Access Link
Morton, JA., Khavari, M., Qin, L., Maciejewska, BM., Tyurnina, AV., Grobert, N., et al. (2021) 'New insights into sono-exfoliation mechanisms of graphite: In situ high-speed imaging studies and acoustic measurements'. Materials Today, 49. pp. 10 - 22. ISSN: 1369-7021 Open Access Link
Khavari, M., Priyadarshi, A., Subroto, T., Beckwith, C., Pericleous, K., Eskin, DG. and et al. (2021) 'Scale Up Design Study on Process Vessel Dimensions for Ultrasonic Processing of Water and Liquid Aluminium'. Ultrasonics Sonochemistry, 76. pp. 1 - 13. ISSN: 1350-4177 Open Access Link
Dong, X., Feng, L., Nyberg, EA. and Ji, S. (2021) 'Development of an Mg–RE-Based Die-Cast Magnesium Alloy for Elevated Applications'.Magnesium 2021. Virtual event. 29 - 18 June. Springer International Publishing. pp. 29 - 36. ISSN: 2367-1181 Open Access Link
Cai, Q., Mendis, CL., Wang, S., Chang, ITH. and Fan, Z. (2021) 'Effect of heat treatment on microstructure and tensile properties of die-cast Al-Cu-Si-Mg alloys'. Journal of Alloys and Compounds, 881. pp. 160559 - 160559. ISSN: 0925-8388
Ghosh, PS., Arya, A., Basak, CB., Poswal, AK. and Banerjee, S. (2021)
'Chemical ordering as a precursor to formation of ordered δ-UZr
Lordan, E., Zhang, Y., Dou, K., Tzileroglou, C., Jacot, A., Blake, P. and et al. (2021) 'Turbulent breakup of non-metallic inclusions and equiaxed crystals during solidification of a hypoeutectic Al-Si alloy'. Materialia, 17. pp. 1 - 19. ISSN: 2589-1529 Open Access Link
Yang, X., Tang, F., Hao, X. and Li, Z. (2021) 'Oxide Evolution During the Solidification of 316L Stainless Steel from Additive Manufacturing Powders with Different Oxygen Contents'. Metallurgical and Materials Transactions B, 52 (4). pp. 2253 - 2262. ISSN: 1073-5615 Open Access Link
Lordan, E., Zhang, Y., Dou, K., Jacot, A., Tzileroglou, C., Blake, P. and et al. (2021) 'On the probabilistic nature of high-pressure die casting'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 817. pp. 1 - 8. ISSN: 0921-5093 Open Access Link
Yang, H., Zhang, Y., Wang, J., Liu, Z., Liu, C. and Ji, S. (2021)
'Additive manufacturing of a high strength Al-5Mg
Fan, Z., Gao, F., Wang, Y., Men, H. and Zhou, L. (2021) 'Effect of solutes on grain refinement'. Progress in Materials Science, 123. pp. 1 - 30. ISSN: 0079-6425 Open Access Link
Beckwith, C., Djambazov, G., Pericleous, K., Subroto, T., Eskin, DG., Roberts, D., et al. (2021) 'Multiphysics Modelling of Ultrasonic Melt Treatment in the Hot-Top and Launder during Direct-Chill Casting: Path to Indirect Microstructure Simulation'. Metals, 11 (5). pp. 1 - 14.Open Access Link
Fang, C., Que, Z. and Fan, Z. (2021) 'Crystal chemistry and electronic structure of the β-AlFeSi phase from first-principles'. Journal of Solid State Chemistry, 299. pp. 1 - 8. ISSN: 0022-4596 Open Access Link
Yang, H., Patel, JB., Yang, X., Gavras, S. and Dieringa, H. (2021) 'Properties of Mg-based metal matrix nanocomposites processed by high shear dispersion technique (HSDT)-A review'. Current Nanomaterials, 6 (2). pp. 106 - 118. ISSN: 2405-4615 Open Access Link
Souissi, M., Fang, CM., Sahara, R. and Fan, Z. (2021)
'Formation energies of θ-Al