Eskin, DG. (2012) 'Recent trends in the science and technology of crystallization of aluminum alloys'. Metal Science and Heat Treatment, 53 (9-10). pp. 408 - 413. ISSN: 0026-0673

Ji, S., Watson, D., Fan, Z. and White, M. (2012) 'Development of a super ductile diecast Al-Mg-Si alloy'. Materials Science and Engineering A. ISSN: 0921-5093

Yamanoǧlu, R., Karakulak, E. and Zeren, M. (2012) 'Tribological properties of vacuum hot pressed Al-Cu-Mg-SiC composites'. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition Euro Pm 2012.

Karakulak, E., Yamanoǧlu, R. and Zeren, M. (2012) 'Production of silver powders by prep atomization'. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition Euro Pm 2012.

Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2012) 'ROLE OF SOLUTE AND TRANSITION METALS IN GRAIN REFINEMENT OF ALUMINUM ALLOYS UNDER ULTRASONIC MELT TREATMENT'.13th International Conference on Aluminum Alloys (ICAA). Carnegie Mellon Univ, Pittsburgh, PA. 1 - 7 June. JOHN WILEY & SONS. pp. 1389 - 1394.

Nowak, M. and Nadendla, HB. (2012) 'Grain Refiner for Aluminium-Silicon Sand Casting Aloys', inLight Metals 2012. Springer International Publishing. pp. 349 - 353. ISBN 13: 9783319485706.

Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2012) 'Formation of Microstructure in Al-Si Alloys Under Ultrasonic Melt Treatment'. Springer International Publishing. pp. 999 - 1004.

Fang, CM., van Huis, MA. and Zandbergen, HW. (2012) 'Stability and structures of the CFCC-TmC phases: A first-principles study'. Computational Materials Science, 51 (1). pp. 146 - 150. ISSN: 0927-0256

Hadi, I., Jabbareh, MA., Nikbakht, R. and Assadi, H. (2012) 'Modelling of Microstructure Evolution during Thermal Processes – A Hybrid Deterministic-Probabilistic Approach'.6th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS 2010). Guilin Univ Elect Technol, Guilin, PEOPLES R CHINA. 1 - 19 November. Trans Tech Publications, Ltd.. pp. 63 - 70. ISSN: 0255-5476

Alidokht, SA., Abdollah-zadeh, A., Soleymani, S., Saeid, T. and Assadi, H. (2012) 'Evaluation of microstructure and wear behavior of friction stir processed cast aluminum alloy'. Materials Characterization, 63. pp. 90 - 97. ISSN: 1044-5803

Parvin, N. and Rahimian, M. (2012) 'The Characteristics of Alumina Particle Reinforced Pure Al Matrix Composite'.1st International Congress on Advances in Applied Physics and Materials Science (APMAS). Antalya, TURKEY. Institute of Physics, Polish Academy of Sciences. pp. 108 - 110. ISSN: 0587-4246

Wang, Y., Li, H-T. and Fan, Z. (2012) 'Oxidation of Aluminium Alloy Melts and Inoculation by Oxide Particles'. Transactions of the Indian Institute of Metals. pp. 1 - 9. ISSN: 0972-2815

Li, H-T., Wang, Y. and Fan, Z. (2012) 'Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al-Mg alloys'. Acta Materialia, 60 (4). pp. 1528 - 1537. ISSN: 1359-6454

Reihanian, M., Bagherpour, E. and Paydar, MH. (2012) 'Particle distribution in metal matrix composites fabricated by accumulative roll bonding'. Materials Science and Technology, 28 (1). pp. 103 - 108. ISSN: 0267-0836

Sundaram, K., Babu, NH., Scamans, GM., Eskin, DG. and Fan, Z. (2012) 'Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content'. International Journal of Materials Research, 103 (10). pp. 1228 - 1234.

Xia, M., Huang, Y., Cassinath, Z. and Fan, Z. (2012) 'Rheo-extrusion of AZ91D'. Solid State Phenomena, 192-193. pp. 470 - 475.

Fan, Z. (2012) 'An Epitaxial Model for Heterogeneous Nucleation on Potent Substrates'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. pp. 1 - 10. ISSN: 1073-5623

Satya, SJ., Kumar, V., Barekar, NS., Biswas, K. and Dhindaw, BK. (2012) 'Microstructural Evolution Under Low Shear Rates During Rheo Processing of LM25 Alloy'. Journal of Materials Engineering and Performance. pp. 1 - 7. ISSN: 1059-9495 Open Access Link

Al-Helal, K., Stone, IC. and Fan, Z. (2012) 'Simultaneous Primary Si Refinement and Eutectic Modification in Hypereutectic Al-Si Alloys'. Transactions of the Indian Institute of Metals, 65 (6). pp. 1 - 5. ISSN: 0972-2815

Huang, Y., Zahid, GH. and Prangnell, PB. (2012) 'Loss of High Angle Boundary Area during Annealing a Cryo-SPD Processed Al-Alloy with a Nano-Scale Lamellar Grain Structure'. Materials Science Forum, 715-716. pp. 219 - 226. ISSN: 0255-5476

Zhang, L., Subroto, T., Katgerman, L., Eskin, DG. and Miroux, A. (2012) 'Influence of melt feeding scheme and casting parameters during direct-chill casting on microstructure of an AA7050 billet'. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 43B (6). pp. 1565 - 1573. ISSN: 1073-5615 Open Access Link

Bayandorian, I., Stone, I., Huang, Y. and Fan, Z. (2012) 'Twin Roll Casting of Thin AZ31 Magnesium Alloy Strip with Uniform Microstructure and Chemistry'.Symposium on Magnesium Technology held during TMS Annual Meeting and Exhibition. Orlando, FL. Springer International Publishing. pp. 135 - 140. ISSN: 1545-4150

Zuo, YB., Jiang, B., Zhang, Y. and Fan, Z. (2012) 'Melt Conditioned DC (MC-DC) Casting of Magnesium Alloys'. Magnesium Technology. pp. 155 - 160. ISSN: 1545-4150

Liu, D., Zuo, Y., Meng, W., Chen, M. and Fan, Z. (2012) 'Fabrication of biodegradable nano-sized β-TCP/Mg composite by a novel melt shearing technology'. Materials Science and Engineering C, 32 (5). pp. 1253 - 1258. ISSN: 0928-4931

Yamanoglu, R., Karakulak, E. and Zeren, M. (2012) 'Mechanical and wear properties of pre-alloyed molybdenum P/M steels with nickel addition'. Journal of Mining and Metallurgy, Section B: Metallurgy, 48 (2). pp. 251 - 258. ISSN: 1450-5339

Manu, KMS., Resmi, VG., Brahmakumar, M., Anand, N., Rajan, TPD., Pavithran, C., Pai, BC. and Manisekar, K. et al. (2012) 'Synthesis of Porous SiC Preform and Squeeze Infiltration Processing of Aluminium-SiC Metal Ceramic Composites'. Trans Tech Publications, Ltd.. pp. 371 - 376. ISSN: 0255-5476

Alishahi, M., Monirvaghefi, SM., Saatchi, A. and Hosseini, SM. (2012) 'The effect of carbon nanotubes on the corrosion and tribological behavior of electroless Ni–P–CNT composite coating'. Applied Surface Science, 258 (7). pp. 2439 - 2446. ISSN: 0169-4332

Hosseini, SM., Kermanpur, A., Najafizadeh, A. and Alishahi, M. (2012) 'Effect of Process Parameters on Microstructures and Mechanical Properties of a Nano/ultrafine Grained Low Carbon Steel Produced by Martensite Treatment Using Plane Strain Compression'. ISIJ International, 52 (3). pp. 464 - 470. ISSN: 0915-1559

CHENG, W., QUE, Z., ZHANG, J., XU, C., LIANG, W. and YOU, B. (2012) 'EFFECTS OF Zn CONTENT ON MICROSTRUCTURE EVO-LUTION AND MECHANICAL PROPERTIES OF INDIRECT-EXTRUDED M}-BSn-Zn ALLOYS'. Acta Metallurgica Sinica, 48 (3). pp. 371 - 371. ISSN: 0412-1961

Kutty, TRG., Dash, S., Banerjee, J., Kaity, S., Kumar, A. and Basak, CB. (2012) 'Thermophysical properties of U2Mo intermetallic'. Journal of Nuclear Materials, 420 (1-3). pp. 193 - 197. ISSN: 0022-3115

Bayandorian, I., Fan, Z., Stone, IC., Huang, Y. and Scamans, GM. (2011) 'Advances in Twin Roll Casting of Magnesium Alloys'.The John Hunt International Symposium. Brunel University, Uxbridge, UK. 12 - 14 December. Brunel Unievrsity Press. pp. 319 - 333.

Hunt, JD. and Fan, Z. (2011) 'A simple model for the nucleation and growth of equiaxed grains'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 59 - 78.

Li, H-T., Wang, Y., Zuo, Y. and Fan, Z. (2011) 'Harnessing oxides in liquid metals and alloys'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 93 - 110.

Bayandorian, I., Fan, Z., Stone, IC., Huang, Y. and Scamans, GM. (2011) 'Advances in twin roll casting of magnesium alloys'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 319 - 333.

Zhang, L., Eskin, DG., Miroux, AG. and Katgerman, L. (2011) 'On the mechanism of the formation of primary intermetallics under ultrasonic melt treatment in an Al-Zr-Ti alloy'. Iop Conference Series Materials Science and Engineering. ISSN: 1757-8981

Huang, Y., Wang, L., Liu, Y., Zhao, Z., Wu, JT. and Yan, P. (2011) 'Effects of alloying elements on oxidation behavior of a Ni-base superalloy at 1223 K'. Cailiao Rechuli Xuebao Transactions of Materials and Heat Treatment, 32 (12). pp. 1 - 6. ISSN: 1009-6264

Assadi, H., Schmidt, T., Richter, H., Kliemann, J-O., Binder, K., Gärtner, F., Klassen, T. and Kreye, H. et al. (2011) 'On Parameter Selection in Cold Spraying'. Journal of Thermal Spray Technology, 20 (6). pp. 1161 - 1176. ISSN: 1059-9630

Fan, Z. and Stone, IC. (2011) 'Solidification Science and Technology'. Uxbridge: Brunel University Press. ISSN 13: 978-1-902316-99-4

Holroyd, NJH. and Scamans, GM. (2011) 'Crack Propagation During Sustained-Load Cracking of Al-Zn-Mg-Cu Aluminum Alloys Exposed to Moist Air or Distilled Water'. Metallurgical and Materials Transactions A, 42 (13). pp. 3979 - 3998. ISSN: 1073-5623

Kumar, S., Hari Babu, N., Scamans, GM. and Fan, Z. (2011) 'Microstructural evaluation of melt conditioned twin roll cast Al–Mg alloy'. Materials Science and Technology, 27 (12). pp. 1833 - 1839. ISSN: 0267-0836

van Huis, MA., Figuerola, A., Fang, C., Béché, A., Zandbergen, HW. and Manna, L. (2011) 'Chemical Transformation of Au-Tipped CdS Nanorods into AuS/Cd Core/Shell Particles by Electron Beam Irradiation'. Nano Letters, 11 (11). pp. 4555 - 4561. ISSN: 1530-6984

Tirumalasetty, GK., van Huis, MA., Fang, CM., Xu, Q., Tichelaar, FD., Hanlon, DN., Sietsma, J. and Zandbergen, HW. et al. (2011) 'Characterization of NbC and (Nb,Ti)N nanoprecipitates in TRIP assisted multiphase steels'. Acta Materialia, 59 (19). pp. 7406 - 7415. ISSN: 1359-6454

Hall, A. and Scamans, G. (2011) 'Aluminum for auto body sheet'. Light Metal Age, 69 (6). pp. 6 - 17. ISSN: 0024-3345

Kumar, S., Hari Babu, N., Scamans, GM. and Fan, Z. (2011) 'Influence of intensive melt shearing on the microstructure and mechanical properties of an Al-Mg alloy with high added impurity content'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42 (10). pp. 3141 - 3149. ISSN: 1073-5623 Open Access Link

Zuo, Y., Jiang, B., Enright, P., Scamans, GM. and Fan, Z. (2011) 'Degassing of LM24 Al alloy by intensive melt shearing'. International Journal of Cast Metals Research, 24 (5). pp. 307 - 313. ISSN: 1364-0461

Lalpoor, M., Eskin, DG. and Katgerman, L. (2011) 'Thermal expansion/contraction behavior of AA7050 alloy in the as-cast condition relevant to thermomechanical simulation of residual thermal stresses'. International Journal of Materials Research, 102 (10). pp. 1286 - 1293. ISSN: 1862-5282

Song, K., Pauly, S., Zhang, Y., Gargarella, P., Li, R., Barekar, NS., Kuhn, U., Stoica, M. and Eckert, J. et al. (2011) 'Strategy for pinpointing the formation of B2 CuZr phase in shape memory metastable CuZr-based alloys'. Acta Materialia, 59 (17). pp. 6620 - 6630. ISSN: 1359-6454

Headings, NS., Hayden, SM., Kulda, J., Babu, NH. and Cardwell, DA. (2011) 'Spin anisotropy of the magnetic excitations in the normal and superconducting states of optimally doped YBaCuO studied by polarized neutron spectroscopy'. Physical Review B - Condensed Matter and Materials Physics, 84 (10). ISSN: 1098-0121 Open Access Link

Fang, CM., van Huis, MA., Jansen, J. and Zandbergen, HW. (2011) 'Role of carbon and nitrogen in Fe2C and Fe2N from first-principles calculations'. Physical Review B, 84 (9). ISSN: 1098-0121

Basak, CB. (2011) 'Microstructural evaluation of U-rich U–Zr alloys under near-equilibrium condition'. Journal of Nuclear Materials, 416 (3). pp. 280 - 287. ISSN: 0022-3115

Vlachos, N. and Chang, ITH. (2011) 'Graphical and statistical comparison of various size distribution measurement systems using metal powders of a range of sizes and shapes'. Powder Metallurgy, 54 (4). pp. 497 - 506. ISSN: 0032-5899