Smith, PJ., Cardwell, DA., Babu, NH., Zhou, W. and Shi, Y-H. (2000) 'Properties of Y-Ba-Cu-O powder prepared by evaporative decomposition of solution for melt-processed bulk ceramics'. Superconductor Science and Technology, 13 (11). pp. 1526 - 1532. ISSN: 0953-2048

Cardwell, DA., Babu, NH., Kambara, M., Smith, PJ. and Shi, Y. (2000) 'Fabrication of large grain NdBaCuO by seeded melt growth'. Physica C: Superconductivity, 341-348. pp. 2297 - 2300. ISSN: 0921-4534

Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'Hot deformation and annealing of cube oriented aluminium single crystals'.Materials Congress 2000. CIRENCESTER, ENGLAND. SAGE Publications. pp. 1367 - 1371. ISSN: 0267-0836

Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'Hot deformation and annealing of cube-oriented aluminium single crystals'. Materials Science and Technology, 16 (11-12). pp. 1367 - 1371. ISSN: 1316-2012

Fang, CM., de Wijs, GA., de Groot, RA., Hintzen, HT. and de With, G. (2000) 'ChemInform Abstract: Bulk and Surface Electronic Structure of the Layered Sub‐Nitrides Ca₂N and Sr₂N.'. ChemInform, 31 (44). ISSN: 0931-7597

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Effect of cooling rate on the microstructure of hypereutectic Al-Mg2Si alloys'. Journal of Materials Science Letters, 19 (20). pp. 1825 - 1828. ISSN: 0261-8028

Babu, NH., Lo, W. and Cardwell, DA. (2000) 'Influence of Undercooling and Nd₄Ba₂Cu₂O₁₀Content on the Growth Rate of Large‐Grain Bulk Nd‐Ba‐Cu‐O Superconductor'. Journal of the American Ceramic Society, 83 (10). pp. 2622 - 2624. ISSN: 0002-7820

Niu, HJ. and Chang, ITH. (2000) 'Microstructural evolution during laser cladding of M2 high-speed steel'. Metallurgical and Materials Transactions A, 31 (10). pp. 2615 - 2625. ISSN: 1073-5623

Ji, S. and Fan, Z. (2000) 'Microstructural evolution of semisolid Sn-15wt%Pb alloy under high shear rate and high intensity of turbulence'.the 6th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Turin, Italy. 20 - 29 September. Edimet. pp. 723 - 729.

Humphreys, FJ. and Huang, Y. (2000) 'Grain boundary migration during recovery and the early stages of recrystallization'.21th Inter Symp on Materials Science: Recrystalliozation-Fundamental Aspects and Relations to Deformation Microstructure. Roskilde, Denmark. 5 - 5 September.

Peng, HX., Fan, Z. and Wang, DZ. (2000) 'In situAl₃Ti–Al₂O₃ intermetallic matrix composite: Synthesis, microstructure, and compressive behavior'. Journal of Materials Research, 15 (9). pp. 1943 - 1949. ISSN: 0884-2914

Jacot, A., Maijer, D. and Cockcroft, SL. (2000) 'A two-dimensional model for the description of the columnar-to-equiaxed transition in competing gray and white iron eutectics and its application to calender rolls'. Metallurgical and Materials Transactions A, 31 (8). pp. 2059 - 2068. ISSN: 1073-5623

Srivastava, D., Chang, ITH. and Loretto, MH. (2000) 'The optimisation of processing parameters and characterisation of microstructure of direct laser fabricated TiAl alloy components'. Materials & Design, 21 (4). pp. 425 - 433. ISSN: 0261-3069

Fang, CM., Parker, SC. and de With, G. (2000) 'Atomistic Simulation of the Surface Energy of Spinel MgAl₂O₄'. Journal of the American Ceramic Society, 83 (8). pp. 2082 - 2084. ISSN: 0002-7820

Huang, Y. and Humphreys, FJ. (2000) 'High resolution EBSD and its application to the study of heavily deformed microstructures'.IUMRS - 6th Inter. Conf. in Asia, Section E: Scanning Probe Microscopy for Materials Characterization. Hong Kong. 23 - 26 July.

Fang, CM., de Wijs, GA., de Groot, RA., Hintzen, HT. and de With, G. (2000) 'Bulk and Surface Electronic Structure of the Layered Sub-Nitrides Ca₂N and Sr₂N'. Chemistry of Materials, 12 (7). pp. 1847 - 1852. ISSN: 0897-4756

Ji, S., Fan, Z., Wan, L. and Zhang, J. (2000) 'Moulding characteristics of sand mixture with partial vacuum suction techniques'. International Journal of Cast Metals Research, 13 (3). pp. 161 - 165. ISSN: 1743-1336

Peng, HX., Fan, Z., Evans, JRG. and Busfield, JJC. (2000) 'Microstructure of ceramic foams'. Journal of the European Ceramic Society, 20 (7). pp. 807 - 813. ISSN: 0955-2219

Cardwell, DA., Babu, NH., Lo, W. and Campbell, AM. (2000) 'Processing, microstructure and irreversibility of large-grain Nd-Ba-Cu-O'. Superconductor Science and Technology, 13 (6). pp. 646 - 654. ISSN: 0953-2048

Hari Babu, N., Kambara, M., Smith, PJ., Cardwell, DA. and Shi, Y. (2000) 'Fabrication of Large Single-grain Y–Ba–Cu–O Through Infiltration and Seeded Growth Processing'. Journal of Materials Research, 15 (6). pp. 1235 - 1238. ISSN: 0884-2914

Zhang, J., Fan, Z., Wang, Y. and Zhou, B. (2000) 'Hypereutectic aluminium alloy tubes with graded distribution of Mg2Si particles prepared by centrifugal casting'. Materials & Design, 21 (3). pp. 149 - 153. ISSN: 0261-3069

Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'The annealing behaviour of deformed cube-oriented aluminium single crystals'. Acta Materialia, 48 (10). pp. 2543 - 2556. ISSN: 1359-6454

Huang, Y. and Humphreys, FJ. (2000) 'Subgrain growth and low angle boundary mobility in aluminium crystals of orientation {110}〈001〉'. Acta Materialia, 48 (8). pp. 2017 - 2030. ISSN: 1359-6454

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Microstructural evolution of the in situ Al-15wt.%Mg2Si composite with extra Si contents'. Scripta Materialia, 42 (11). pp. 1101 - 1106. ISSN: 1359-6462

Babu, NH., Lo, W., Cardwell, DA. and Shi, YH. (2000) 'Fabrication and microstructure of large grain Nd-Ba-Cu-O'. Superconductor Science and Technology, 13 (5). pp. 468 - 472. ISSN: 0953-2048

Huang, Y., Ferry, M. and Humphreys, FJ. (2000) 'Plain strain compression of Cube orientated Al-0.05Si single-phase alloy at elevated temperatures'.Matererial Congress 2000 on Materials for 21st Century. Cirencester, UK. 22 - 14 April.

Eskin, DG. (2000) 'Primary solidification in aluminum alloys under melt overheating'.7th International Conference on Aluminium Alloys (ICAA7). CHARLOTTESVILLE, VIRGINIA. 9 - 14 April. TRANS TECH PUBLICATIONS LTD. pp. 155 - 160. ISSN: 0255-5476

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Microstructural development of Al–15wt.%Mg2Si in situ composite with mischmetal addition'. Materials Science and Engineering: A, 281 (1-2). pp. 104 - 112. ISSN: 0921-5093

Yan, M. and Fan, Z. (2000) 'The erosion of H21 tool steel in molten A380 alloy'. Journal of Materials Science, 35 (7). pp. 1661 - 1667. ISSN: 0022-2461

Fang, CM., de Wijs, GA., de Groot, RA., Metselaar, R., Hintzen, HT. and de With, G. (2000) 'O/N Ordering in Y₂Si₃O₃N₄ with the Melilite-type Structure from First-Principles Calculations'. Chemistry of Materials, 12 (4). pp. 1071 - 1075. ISSN: 0897-4756

Maijer, D., Cockcroft, S. and Jacot, A. (2000) 'Modeling of microstructure and residual stress in cast iron calender rolls'. Metallurgical and Materials Transactions A, 31 (4). pp. 1201 - 1211. ISSN: 1073-5623

Babu, NH., Rajasekharan, T. and Bai, VS. (2000) 'Use of the ac inductive method to assess the quality of bulk melt textured superconductors'. Physica C: Superconductivity, 330 (3-4). pp. 203 - 207. ISSN: 0921-4534

Kambara, M., Nadendla, HB., Shi, YH. and Cardwell, DA. (2000) 'Reduction of porosity in RE1Ba2Cu3Oy pseudo crystals'.International Conference on Materials and Mechanisms of Superconductivity High Temperature Superconductors VI. HOUSTON, TEXAS. 20 - 25 February. ELSEVIER SCIENCE BV. pp. 2473 - 2474. ISSN: 0921-4534

Kambara, M., Nadendla, HB., Shi, Y. and Cardwell, DA. (2000) 'Reduction of porosity in RE1Ba2Cu3Oy pseudo crystals'. Physica C Superconductivity and Its Applications, 341-348 (IV). pp. 2473 - 2474. ISSN: 0921-4534

Niu, HJ. and Chang, ITH. (2000) 'Selective laser sintering of gas atomized M2 high speed steel powder'. Journal of Materials Science, 35 (1). pp. 31 - 38. ISSN: 0022-2461

Fang, CM., de Groot, RA., Bischoff, MMJ. and van Kempen, H. (2000) 'Local electronic structure of intrinsic defects and impurities at the Fe(001) surface'. Surface Science, 445 (1). pp. 123 - 129. ISSN: 0039-6028

Fang, CM. and de Groot, RA. (2000) 'The electronic structure and magnetism of the Al/Fe interfaces'. Journal of Physics and Chemistry of Solids, 61 (1). pp. 1 - 7. ISSN: 0022-3697

Nisancioglu, K., Nordlien, JH., Afseth, A. and Scamans, GM. (2000) 'Significance of thermomechanical processing in determining corrosion behavior and surface quality of aluminum alloys'. Materials Science Forum, 331. ISSN: 0255-5476

Mummery, PM., Burdekin, NA. and Stone, IC. (2000) 'The effct of spatial distribution of reinforcement on the fracture of particle reinforced MMCs'.Euromat '99. Wiley-VCH. pp. 162.

Lo, W., Babu, NH., Cardwell, DA., Shi, Y. and Astill, DM. (2000) 'Fabrication and characterization of large Nd–Ba–Cu–O grains prepared under low oxygen pressure'. Journal of Materials Research, 15 (1). pp. 33 - 39. ISSN: 0884-2914

Babu, NH., Cardwell, DA., Lo, W. and Campbell, AM. (2000) 'Flux pinning in largeNdBa2Cu3O7−δgrains fabricated by seeded-melt growth'. Physical Review B, 61 (1). pp. 735 - 740. ISSN: 0163-1829

Peng, HX., Fan, Z. and Evans, JRG. (2000) 'Factors affecting the microstructure of a fine ceramic foam'. Ceramics International, 26 (8). pp. 887 - 895. ISSN: 0272-8842

Peng, HX., Fan, Z. and Evans, JRG. (1999) 'Novel MMC microstructures prepared by melt infiltration of reticulated ceramic preforms'.7th International Conference on Metal Matrix Composites (MMC VII). LONDON, ENGLAND. 8 - 9 December. SAGE Publications. pp. 903 - 907. ISSN: 0267-0836

Aldrich, DE., Fan, Z. and Mummery, P. (1999) 'Processing, microstructure, and physical properties of interpenetrating AlO/Ni composites'.7th International Conference on Metal Matrix Composites (MMC VII). LONDON, ENGLAND. 8 - 9 December. SAGE Publications. pp. 747 - 752. ISSN: 0267-0836

Zhou, Z., Peng, HX., Fan, Z. and Li, DX. (1999) 'MMCs with controlled non-uniform distribution of submicrometre Al2O3 particles in 6061 aluminium alloy matrix'.7th International Conference on Metal Matrix Composites (MMC VII). LONDON, ENGLAND. 8 - 9 December. INST MATERIALS. pp. 908 - 912. ISSN: 0267-0836

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (1999) 'Microstructure and mechanical properties of in situ Al-Mg(2)Sicomposites'.7th International Conference on Metal Matrix Composites (MMC VII). LONDON, ENGLAND. 8 - 9 December. INST MATERIALS. pp. 913 - 918. ISSN: 0267-0836

Ji, S., Vuorinen, JJ. and Fan, Z. (1999) 'A casting classification and coding system suitable for a CIMS in casting production'. International Journal of Cast Metals Research, 12 (3). pp. 161 - 165. ISSN: 1364-0461 Open Access Link

Ji, S., Vuorinen, J. and Fan, Z. (1999) 'A comprehensive classification and coding system suitable for a computer integrated system in casting production'. International Journal of Casting Metals Research, 12 (1999). pp. 161 - 165.Open Access Link

Babu, NH., Rajasekharan, T., Menon, L. and Malik, SK. (1999) 'Infiltration‐Growth Processing of NdBa2Cu3O7‐delta Superconductor'. Journal of the American Ceramic Society, 82 (11). pp. 2978 - 2984. ISSN: 0002-7820

Niu, HJ. and Chang, ITH. (1999) 'Instability of scan tracks of selective laser sintering of high speed steel powder'. Scripta Materialia, 41 (11). pp. 1229 - 1234. ISSN: 1359-6462

Ding, W., Ji, S. and Zhang, J. (1999) 'Application of CAD of Hot Box Die of Cylinder Head (in Chinese)'. China Foundry Machinery & Technology, 1999 (05). pp. 21 - 25.