IMM
Khorrampanah, M., Seyedarabi, H., Danishvar, S., Farhoudi, M., Houshmand, M. and Talebi, M. (2026) 'Effective shapes of tDCS electrodes in stroke patients: A modeling study'. Biomedical Signal Processing and Control, 112. pp. 108423 - 108423. ISSN: 1746-8094
Zhang, H., Zai, L., Wang, Y. and Xue, X. (2026) 'Unveiling the hot cracking mechanism in Ti2AlNb-based alloys during fusion welding'. Materials Letters, 403. pp. 139400 - 139400. ISSN: 0167-577X
Zhu, M., Wang, J., Wen, T., Qiu, D., Liu, Z., Ji, S., et al. (2026) 'Strength-ductility synergy high performance and thermal resistant TiB2/Al-Mg-Yb-Zr alloy prepared by additive manufacturing'. Materials Science and Engineering A, 950. pp. 149482 - 149482. ISSN: 0921-5093
Yan, G., Zhao, Y., Wang, D., Jin, K., Zhang, H., Wang, P. and et al. (2026) 'Mechanical enhancement of hybrid steel fiber-reinforced superabsorbent polymer concrete: Experimental and multiscale simulation analysis'. Journal of Building Engineering, 117. pp. 114762 - 114762. ISSN: 2352-7102
Xiang, K., Qin, L., Huang, S., Song, H., Bazhenov, V., Bellucci, V., et al. (2025) 'Ultrasonic cavitation shock wave exfoliation dynamics of 2D materials revealed in situ by MHz XFEL imaging and multiphysics modeling'. Science Advances, 11 (48). pp. eady9558.
Mortazavi, S., Makouei, S., Abbasian, K. and Danishvar, S. (Accepted) 'Design and Analysis of a Photonic Crystal Fiber Sensor for Identifying the Terahertz Fingerprints of Water Pollutants'. Photonics, 12 (11). pp. 1136 - 1136.
Hosking, L., Al-Noaimat, YA., Zhou, X., Zagorscak, R., Benbow, S. and Metcalfe, R. (2025) 'Numerical sensitivity analysis of cement sheath bond integrity for CO₂ injection wells under pressure and thermal loading'. International Journal of Greenhouse Gas Control, 148. pp. 1 - 12. ISSN: 1750-5836 Open Access Link
Zhu, C., Guo, D., Leung, CLA., Tzanakis, I., Lee, PD. and Eskin, D. (2025) 'Design of hot-tearing resistant and thermally stable aluminium alloys for advanced casting technologies'. Materials and Design, 260. pp. 1 - 11. ISSN: 0264-1275 Open Access Link
Hadjiaghaie Vafaie, R., Poorreza, E., Sheykhivand, S. and Danishvar, S. (Accepted) 'A Bionic Sensing Platform for Cell Separation: Simulation of a Dielectrophoretic Microfluidic Device That Leverages Dielectric Fingerprints'. Biomimetics, 10 (11). pp. 753 - 753.
Lencis, U., Klaucans, R., Udris, A., Korjakins, A., Zhou, X. and Bumanis, G. (2025) 'The Moisture Effect on Ultrasonic, Rebound Hardness and Drilling Resistance Data in Non-Destructive Testing of Concrete'. Applied Sciences Switzerland, 15 (22). pp. 11973 - 11973.
Wu, H., Song, X., Lu, J., Dou, K., Wang, W., Zhang, Y. and et al. (2025) 'A machine learning method for predicting the elongation to failure of Al–Si alloy in high pressure die casting combining experiment and modeling'. Journal of Materials Research and Technology, 39. pp. 2621 - 2632. ISSN: 2238-7854
Coskun Tas, Z., Celik, T., Mutlu, I., Yamanoglu, R. and Anguilano, L. (2025) 'A Novel Radially Graded Hydroxyapatite-Based Composite for Bioactive Implant Interfaces'. Journal of Biomedical Materials Research Part A, 113 (11). pp. e38007. ISSN: 1549-3296
Paul, D., Badri, H., Omairey, S., Jayasree, N., Cosby, J. and Penhaul Smith, J. (2025) 'Life Cycle Assessment of Glass Fibre Recovery from Waste Composites Using Pressolysis'. Waste and Biomass Valorization, 0 (ahead of print). pp. 1 - 15. ISSN: 1877-2641 Open Access Link
Li, N., Wang, Q., Ji, S., Yin, S., Guo, N., Niu, W. and et al. (2025) 'Deformation-driven precipitate evolution in cold sprayed age-hardenable aluminum alloys'. Applied Surface Science, 718 (15 February 2026). pp. 1 - 8. ISSN: 0169-4332 Open Access Link
Li, X., Fan, Y., Li, Q., Zhou, X. and Shah, SP. (2025) 'Fracture behavior and enhancement strategies for cement-based materials subjected to harsh environmental conditions: A review'. Journal of Building Engineering, 114. pp. 1 - 37. ISSN: 2352-7102
Ali, TM., Manivannan, N. and Xu, Y. (2025) 'The Effect of Social Media and Artificial Intelligence (AI) on Fear of Missing Out (FoMo) within Kuwait’s Context'. International Journal of Humanities and Social Science, 15. pp. 497 - 513. ISSN: 2220-8488 Open Access Link
Pei, E. and Lakomiec, M. (2025) 'Standardisation efforts of ISO/TC 261 “Additive Manufacturing”—26th Plenary Meeting of ISO/TC 261 “Additive Manufacturing”'. Progress in Additive Manufacturing, 10 (11). pp. 10411 - 10412. ISSN: 2363-9512
Hami Seno, A., Fakis, D., Omairey, S., Zitoun, A., Jayasree, N., Kazilas, M., et al. (2025) 'Smart Self-sensing Composite Marine Propeller: Increased Maintenance Efficiency Through Integrated Structural Health Monitoring Systems', in McNally, C., Carroll, P., Martinez-Pastor, B., Ghosh, B., Efthymiou, M. and Valantasis-Kanellos, N. (eds.) Lecture Notes in Mobility. Cham : Springer. , Part F1025. pp. 61 - 67. ISBN 10: 3-032-06763-4. ISBN 13: 978-3-032-06762-3. Open Access Link
Shourideh, M., Yasseri, S. and Bahai, H. (2025) 'Hydrogen Pipelines Safety Using System Dynamics'. Hydrogen, 6 (4). pp. 1 - 19.Open Access Link
Yang, Q. (2025) 'Towards a unification of measurement, AI, quality and sustainability: Foundations and principles'. EDP Sciences. pp. 1 - 5. ISSN: 2274-7214 Open Access Link
Osman, D., Murali, M. and Noh, Y. (2025) 'Design of a two axis optoelectronic joint measurement sensor using orientation constraining mechanism for flexible robotic application'.International Conference on Measurement, AI, Quality and Sustainability (MAIQS 2025). London, UK. 1 - 28 August. EDP Sciences. pp. 04003-1 - 04003-4. ISSN: 2274-7214 Open Access Link
Wang, Z., Shang, Y., Lu, K., Chen, Z., Wang, D., Hao, C., et al. (2025) 'A novel fabrication of Al-based high-entropy alloy with ultra-high hardness via usage of recycled aluminum'. Materials Characterization, 228. pp. 115430 - 115430. ISSN: 1044-5803
Tian, X., Jiang, F., Xu, C., Shen, C., Dai, Z., Duan, J., et al. (2025) 'Synergistic effects of deep cryogenic treatment and aging on microstructure and mechanical properties of (FeCoNi)86Al7Ti7 high-entropy alloy'. Journal of Materials Science, 60 (40). pp. 19249 - 19266. ISSN: 0022-2461
Madeira Araujo, JP., Gutjahr, J., Yang, Q. and Mynors, D. (2025) 'Influence of process parameters on powder jet properties in L-DEDp using different nozzle designs'.International Conference on Measurement, AI, Quality and Sustainability (MAIQS 2025). London, UK. 1 - 28 August. EDP Sciences. pp. 08002-1 - 08002-6. ISSN: 2274-7214 Open Access Link
Zhang, M., Yang, Q., Sutcliffe, M. and Nicholson, I. (2025) 'NEAT-based 3D path planning for mobile robotic arms in NDT with offline inverse kinematics validation'.International Conference on Measurement, AI, Quality and Sustainability (MAIQS 2025). London, UK. 1 - 28 August. EDP Sciences. pp. 05002-1 - 05002-6. ISSN: 2274-7214 Open Access Link
Gao, P., Liu, F., Yang, Q. and Wang, J. (2025) 'Research on local visual global localization method based on out-of-view reference of spatial point association'.International Conference on Measurement, AI, Quality and Sustainability (MAIQS 2025). London, UK. 1 - 28 August. EDP Sciences. pp. 01001-1 - 01001-5. ISSN: 2274-7214 Open Access Link
Kumar, S., Nageswaran, C. and Yang, Q. (2025) 'LSTM based SCC detection using ultrasonic testing based data'.International Conference on Measurement, AI, Quality and Sustainability (MAIQS 2025). London, UK. 1 - 28 August. EDP Sciences. pp. 05004-1 - 05004-5. ISSN: 2274-7214 Open Access Link
Xie, Y., Liu, W., Yang, Q., Li, Q. and Liu, G. (2025) 'SharkNet-5G wireless link integration technology research'.International Conference on Measurement, AI, Quality and Sustainability (MAIQS 2025). London, UK. 1 - 28 August. EDP Sciences. pp. 02002-1 - 02002-5. ISSN: 2274-7214 Open Access Link
Kong, X., Wang, Z., Miao, Y., Liu, X., Yang, Q. and Tang, Q. (2025) 'Joint optimisation model for light source position based on a combined target'.International Conference on Measurement, AI, Quality and Sustainability (MAIQS 2025). London, UK. 1 - 28 August. EDP Sciences. pp. 01005-1 - 01005-4. ISSN: 2274-7214 Open Access Link
Shen, Y., Zhang, Y. and Yang, Q. (2025) 'Correction of misalignment errors in the magnetic gradient tensor measurement system and its application in localization'.International Conference on Measurement, AI, Quality and Sustainability (MAIQS 2025). London, UK. 1 - 28 August. EDP Sciences. pp. 01009-1 - 01009-5. ISSN: 2274-7214 Open Access Link
Venkatasubramaniam, G., Ghinea, G., Hone, K. and Li, Y. (2025) 'Personalized Email Marketing with Agentic AI'.International Conference on Measurement, AI, Quality and Sustainability (MAIQS 2025). London, UK. 1 - 28 August. EDP Sciences. pp. 06001-1 - 06001-6. ISSN: 2274-7214 Open Access Link
Mumford, AD., Martinez-Moreno, MF., Morales-Hidalgo, M., Povedano-Priego, C., Generelo-Casajus, L., Jroundi, F., et al. (2025) 'Assessing microbially influenced corrosion of titanium as novel canister material for geological disposal facilities'. Applied Surface Science, 717 (1 February 2026). pp. 1 - 14. ISSN: 0169-4332 Open Access Link
Wu, S., Wang, Y., Liu, C., Hou, D., Zhou, X. and Wang, M. (2025) 'Deterioration Behavior of Steel Passivation Films in a Nano Perspective: Effect of Shear Stress'. Langmuir, 41 (39). pp. 26738 - 26750. ISSN: 0743-7463
Kohr, M., Mikhailov, SE., Nistor, V. and Wendland, WL. (2025) 'Stationary Stokes and Navier-Stokes Equations with Variable Coefficients'. Springer. ISSN 13: 978-3-031-98604-8
Chidara, A., Cheng, K. and Gallear, D. (2025) 'Ontology-Based Modelling and Analysis of Sustainable Polymer Systems: PVC Comparative Polymer and Implementation Perspectives'. Polymers, 17 (19). pp. 1 - 26. ISSN: 2073-4360 Open Access Link
Chohan, BS., Yuan, Z., Riaz, A. and Cheng, K. (2025) 'Carbon Fiber-Reinforced Polymer Sustainability—A New Outlook on Recycling Methods and Strategic Decision-Making for the Recovery of Fiber, Matrix, and Composite'. Polymer Composites, 0 (ahead of print). pp. 1 - 31. ISSN: 0272-8397
Ali, TMA., Manivannan, N. and Xu, Y. (2025) 'How is the Use of AI in Social Media Accepted by Users and Impacting Human – Computer Interfacing in That Area?'. International Journal of Psychology and Behavioral Science, 13. pp. 1 - 17. ISSN: 2374-2380 Open Access Link
Ahmad Al-Ali, D., Manivannan, N., Hunaiti, Z. and Xu, Y. (2025) 'Privacy and security concerns shaping smart city adoption: Evidence from Qatar'. Design+, 0 (ahead of print). pp. 1 - 19.Open Access Link
Liu, Y., Meng, H., Swash, MR., Huang, Y. and Yan, C. (2025) 'Holoscopic 3D Imaging Systems: A Review of History, Recent Advances and Future Directions'. Applied Sciences, 15 (18). pp. 1 - 22.Open Access Link
Madeira Araujo, JP., Gutjahr, J., Yang, Q. and Mynors, D. (2025) 'Powder-Gas Jet Stream Characterisation Techniques in Laser Directed Energy Deposition: A Systematic Review'. Processes, 13 (9). pp. 1 - 45.Open Access Link
(Accepted) 'Future Star of Metallurgy'. .
Muhammad Waqas, N., Muhammad Mehtab, A., Swash, R., Qammer, A., Muhammad Ali, I. and Olaoluwa, P. (2025) 'Enhancing Intelligence in Multi-Agent Systems with Edge-Assisted Causal Knowledge Aggregation'. npj Wireless Technology (npj Wirel. Technol.).
Najafi, A., Reihanian, M., Bagherpour, E., Mendis, CL., Mazaheri, Y., Botkin, A., et al. (2025) 'Tailoring microstructure and mechanical behavior of Mg-1Zn-0.2Ca alloy through Hot Extrusion with a Cosine-Profile Die'. Materials Today Communications, 49. pp. 1 - 11. ISSN: 2352-4928
Chen, D., Chen, M., Zhou, X., Jian, S., Zhang, J., Yang, X. and et al. (2025) 'Development of Ca-alginate/nano SiO2 PCC based on waste cooking oil derivative for foamed concrete applied to energy-saving system'. Journal of Cleaner Production, 530. pp. 1 - 12. ISSN: 0959-6526
Wu, H., Lv, C., Xu, Y., Sun, Y., Qu, S. and Zhou, X. (2025) 'Deterioration of Concrete Under the Combined Action of Sulfate Attack and Freeze–Thaw Cycles: A Review'. Materials, 18 (18). pp. 1 - 27. ISSN: 1996-1944 Open Access Link
Que, Z., Wang, Y., Fan, Z., Negrea, RF., Zhou, X. and Ramasse, Q. (2025) 'Interfacial Segregation of Fe and Si on TiB2 Surface and Refinement of Fe-Bearing Intermetallic Compounds and Primary Si Part I: Segregation Phenomenon and Formation of Two-Dimensional Compounds (2DCs) at the Al/TiB2 Interface'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 0 (ahead of print). pp. 1 - 17. ISSN: 1073-5623 Open Access Link
Que, Z., Wang, Y., Fan, Z. and Zhou, X. (2025) 'Interfacial segregation of Fe and Si on TiB2 surface and refinement of Fe-bearing intermetallic compounds and primary Si : Part II Refinement of primary Fe-intermetallic compounds and primary Si through manipulating nucleation potency of TiB2 particles'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 946. pp. 1 - 15. ISSN: 0921-5093 Open Access Link
Shahri, B., Lubis, P. and Pei, E. (2025) 'Co-design: Meanings and applications in design and engineering', in Pei, E. and Becker, K. (eds.) Design Thinking Theory and Practice. Boca Raton : CRC Press. pp. 155 - 181. ISBN 10: 1-003-48752-1. ISBN 13: 978-1-032-76780-2.
Pei, E. and Becker, K. (2025) 'Design Thinking: Theory and Practice'. Boca Raton: CRC Press. ISSN 10: 1-003-48752-1 ISSN 13: 978-1-032-76780-2
Manjunath, K., Tewary, S., Khatri, N. and Cheng, K. (2025) 'In-process monitoring and prediction of machining status in ultraprecision diamond turning using Mel-frequency cepstral coefficient approach combined with machine learning'. International Journal on Interactive Design and Manufacturing, 0 (ahead of print). pp. 1 - 13. ISSN: 1955-2513