IMM
Zhang, L., Sheng, B., Jiang, W., Zhou, W., Tian, Z. and Tang, Z. (2015) 'On-line power cable partial discharge localisation method based on cable transfer function and detected pulse rise-time'. Gaodianya Jishu High Voltage Engineering, 41 (4). pp. 1204 - 1213. ISSN: 1003-6520
Kalganova, T. and GRICHNIK, AJ. (Accepted) 'SYSTEMS AND METHODS FOR FORECASTING USING CARTESIAN GENETIC PROGRAMMING'.
Amini, A. and Banitsas, K. (2015) 'Recognition of Postures and Freezing of Gait in Parkinson’s Disease Patients Using Microsoft Kinect Sensor'.Amin Amini. Montpellier, France. 22 - 24 April. IEEE. pp. 731 - 734. ISSN: 1948-3546 Open Access Link
Saithna, A., Chizari, M., Morris, G., Anley, C., Wang, B. and Snow, M. (2015) 'An analysis of the biomechanics of interference screw fixation and sheathed devices for biceps tenodesis'. Clinical Biomechanics, 30 (6). pp. 551 - 557. ISSN: 0268-0033 Open Access Link
Konig, CS., Atherton, M., Rogers, N., Gomm, C., Bailey, C., Strange, RC., et al. (2015) 'The need for a marker predicting benefit following cardiovascular disease risk reduction treatment'. [Poster] Exhibited at. Ticagrelor Science Conference
Nowak, M., Bolzoni, L. and Nadendla, HB. (2015) 'The Effect of Nb-B Inoculation on Binary Hypereutectic and Near-eutectic LM13 Al-Si Cast Alloys'. Journal of Alloys and Compounds, 641. pp. 22 - 29. ISSN: 1873-4669 Open Access Link
Serpieri, R., Alfano, G. and Sacco, E. (2015) 'A mixed-mode cohesive-zone model accounting for finite dilation and asperity degradation'. International Journal of Solids and Structures, 67-68. pp. 102 - 115. ISSN: 0020-7683 Open Access Link
Madani, SH., Wissink, J. and Bahai, H. (2015) 'Acomparision of conforming and non-conforming mesh methods for flow around a circular cylinder in non-inertial frame of references'.6th International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS). Venice, ITALY. 1 - 20 May. INT CENTER NUMERICAL METHODS ENGINEERING. pp. 1037 - 1046.
Salski, B., Gwarek, W., Korpas, P., Reszewicz, S., Chong, AYB., Theodorakeas, P., et al. (2015) 'Non-destructive testing of carbon-fibre-reinforced polymer materials with a radio-frequency inductive sensor'. Composite Structures, 122. pp. 104 - 112. ISSN: 0263-8223
Pawar, S., Zhou, X., Hashimoto, T., Thompson, GE., Scamans, G. and Fan, Z. (2015) 'Investigation of the microstructure and the influence of iron on the formation of Al8Mn5 particles in twin roll cast AZ31 magnesium alloy'. Journal of Alloys and Compounds, 628. pp. 195 - 198. ISSN: 0925-8388
Alfaresi, SH. and Hone, K. (2015) 'The intention to use mobile digital library technology: A focus group study in the United Arab Emirates'. International Journal of Mobile Human Computer Interaction, 7 (2). pp. 23 - 42. ISSN: 1942-390X Open Access Link
Haxha, S., Teyeb, A., Malek, FA., Akowuah, EK. and Dayoub, I. (2015) 'Design of Environmental Biosensor Based on Photonic Crystal Fiber with Bends Using Finite Element Method'. Optics and Photonics Journal, 5 (3). pp. 69 - 78. ISSN: 2160-8881 Open Access Link
Vorozhtsov, SA., Eskin, DG., Tamayo, J., Vorozhtsov, AB., Promakhov, VV., Averin, AA. and et al. (2015) 'The Application of External Fields to the Manufacturing of Novel Dense Composite Master Alloys and Aluminum-Based Nanocomposites'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46 (7). pp. 2870 - 2875. ISSN: 1073-5623 Open Access Link
Veluscek, M., Kalganova, T. and Broomhead, P. (2015) 'Improving Ant Colony Optimization Performance through Prediction of Best Termination Condition'.2015 IEEE International Conference on Industrial Technology (ICIT 2015). Seville, Spain. 17 - 19 March. IEEE. pp. 2394 - 2402.Open Access Link
Montalba, C., Ramam, K., Eskin, DG., Ruiz-Navas, EM. and Prat, O. (2015) 'Fabrication of a novel hybrid AlMg5/SiC/PLZT metal matrix composite produced by hot extrusion'. Materials and Design, 69. pp. 213 - 218. ISSN: 0261-3069 Open Access Link
Vorozhtsov, SA., Khrustalyov, P., Eskin, DG., Кulkov, SN. and Alba-Baena, N. (2015) 'The Physical-Mechanical and Electrical Properties of Cast Aluminum-Based Alloys Reinforced with Diamond Nanoparticles'. Russian Physics Journal, 57 (11). pp. 1485 - 1490. ISSN: 1064-8887 Open Access Link
Brewin, MP., Birch, MJ., Mehta, DJ., Reeves, JW., Shaw, S., Kruse, C., et al. (2015) 'Characterisation of Elastic and Acoustic Properties of an Agar-Based Tissue Mimicking Material'. Annals of Biomedical Engineering, 23 (4). pp. 865 - 890. ISSN: 0090-6964 Open Access Link
Musto, M. and Alfano, G. (2015) 'A fractional rate-dependent cohesive-zone model'. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 105 (5). pp. 313 - 341. ISSN: 0029-5981 Open Access Link
Yang, W., Yang, X. and Ji, S. (2015) 'Melt superheating on the microstructure and mechanical properties of diecast Al-Mg-Si-Mn alloy'. Metals and Materials International, 21 (2). pp. 382 - 390. ISSN: 1598-9623 Open Access Link
Koster, RS., Fang, CM., Dijkstra, M., van Blaaderen, A. and van Huis, MA. (2015) 'Stabilization of Rock Salt ZnO Nanocrystals by Low-Energy Surfaces and Mg Additions: A First-Principles Study'. The Journal of Physical Chemistry C, 119 (10). pp. 5648 - 5656. ISSN: 1932-7447
Nowak, M., Yeoh, WK., Bolzoni, L. and Nadendla, HB. (2015) 'Development of Al–Nb–B master alloys using Nb and KBF4 Powders'. Materials and Design, 75. pp. 40 - 46. ISSN: 1873-4197 Open Access Link
Gracio, JJ., Vincze, G., Yoon, JW., Cardoso, RP., Rauch, E. and Barlat, F. (2015) 'Modelling the Effect of Asymmetric Rolling on Mechanical Properties of Al-Mg Alloys'. Steel Research International, 86 (8). pp. 922 - 931. ISSN: 1611-3683
Bolzoni, L., Nowak, M. and Hari Babu, N. (2015) 'Assessment of the influence of Al-2Nb-2B master alloy on the grain refinement and properties of LM6 (A413) alloy'. Materials Science and Engineering A, 628 (25 March 2015). pp. 230 - 237. ISSN: 0921-5093 Open Access Link
Yang, W., Ji, S., Li, Z. and Wang, M. (2015) 'Grain boundary precipitation induced by grain crystallographic misorientations in an extruded Al-Mg-Si-Cu alloy'. Journal of Alloys and Compounds, 624. pp. 27 - 30. ISSN: 0925-8388 Open Access Link
Ferrando Chacon, JL., Kappatos, V., Balachandran, W. and Gan, T-H. (2015) 'A novel approach for incipient defect detection in rolling bearings using acoustic emission technique'. Applied Acoustics, 89. pp. 88 - 100. ISSN: 0003-682X
Lam, B. and Dearden, A. (2015) 'Enhancing service development and service delivery through co-design'. Voluntary Sector Review, 6 (1). pp. 61 - 80. ISSN: 2040-8056
Xiao, C., Ding, H., Cheng, K. and Chen, S. (2015) 'Design of an innovative smart turning tool with application to real-time cutting force measurement'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (3). pp. 563 - 568. ISSN: 0954-4054
Cui, Q., Ding, H. and Cheng, K. (2015) 'An analytical investigation on the workpiece roundness generation and its perfection strategies in centreless grinding'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (3). pp. 409 - 420. ISSN: 0954-4054
Whiteman, J. (2015) 'Third special issue on the Mathematics of Finite Elements and Applications'. Numerical Methods for Partial Differential Equations, 31 (2). pp. 365 - 366. ISSN: 0749-159X
Bai, Q., Li, K., Liang, Y. and Cheng, K. (2015) 'Wear and breakage behaviors of PCD small-diameter end-mill: a case study on machining 2A12 aluminum alloy'. The International Journal of Advanced Manufacturing Technology, 77 (5-8). pp. 839 - 846. ISSN: 0268-3768
Winter, M. and Wei, J. (2015) 'Existence and stability of a spike in the central component for a consumer chain model'. Journal of Dynamics and Differential Equations, 27 (3-4). pp. 1141 - 1171. ISSN: 1572-9222 Open Access Link
Bolzoni, L., Nowak, M. and nadendla. (2015) 'Grain refining potency of Nb-B inoculation on Al-12Si-0.6Fe-0.5Mn alloy'. Journal of Alloys and Compounds, 623. pp. 79 - 82. ISSN: 0925-8388 Open Access Link
Koulouri, T., Lauria, S. and Macredie, RD. (2015) 'Teaching introductory programming: a quantitative evaluation of different approaches'. ACM Transactions on Computing Education, 14 (4). pp. 1 - 28. ISSN: 1531-4278 Open Access Link
Buzolin, RH., Tolnai, D., Mendis, CL., Stark, A., Schell, N., Pinto, H., et al. (2015) 'Investigation of Compression Behavior of Mg‐4Zn‐2(Nd,Gd)‐0.5Zr at 350°C byIn SituSynchrotron Radiation Diffraction'. Wiley. pp. 103 - 107. ISSN: 1545-4150
Lebon, GSB., Pericleous, K., Tzanakis, I. and Eskin, D. (2015) 'A Model of Cavitation for the Treatment of a Moving Liquid Metal Volume', in Wiley. pp. 23 - 30. ISBN 13: 9781119082385.
Eskin, DG. (2015) 'Structure and Casting Defects of Aluminum Billets Produced by Direct‐Chill Casting'. Wiley. pp. 73 - 80.
Stüpp, CA., Szakäcs, G., Mendis, CL., Gensch, F., Müller, S., Feyerabend, F., et al. (2015) 'Powder Metallurgical Synthesis of Biodegradable Mg‐Hydroxyapatite Composites for Biomedical Applications'. Wiley. pp. 425 - 429. ISSN: 1545-4150
Szakâcs, G., Mendis, CL., Tolnai, D., Stark, A., Schell, N., Ovri, H., et al. (2015) 'In SituSynchrotron Radiation Diffraction during Solidification of Mgl5Gd: Effect of Cooling Rate'. Wiley. pp. 79 - 84. ISSN: 1545-4150
Joshi, U. and Babu, NH. (2015) 'The Role of Bismuth in Grain Refinement of Magnesium and Its Alloys'. Wiley. pp. 91 - 94. ISSN: 1545-4150
Eskin, DG., Vadakke Madam, SK., Tamayo, J., Vorozhtsov, SA., Hari Babu, N. and Vorozhtsov, AB. (2015) 'Application of external fields to the development of aluminum-based nanocomposite and master alloys'. TMS Annual Meeting. pp. 19 - 24.Open Access Link
Anguilano, L. and Casalegno, E. (2015) 'MOVImenti: Interaction between Man and Landscape'. Create Space. ISSN 10: 1508432120 ISSN 13: 9781508432128
Bolzoni, L., Nowak, M. and nadendla. (Accepted) 'Assessment of the influence of Al-2Nb-2B master alloy on the grain refinement and properties of LM6 (A413) alloy'. Materials Science & Engineering A, 628. pp. 230 - 237.Open Access Link
Zhang, R-R., Xu, Y-M., Harrison, D., Fyson, J., Qiu, F-L. and Southee, D. (2015) 'Flexible strip supercapacitors for future energy storage'. International Journal of Automation and Computing, 12 (1). pp. 43 - 49. ISSN: 1476-8186 Open Access Link
Ivanov, A., MacAulay., Senin, N., Giusca, C. and Leach, R. (2015) 'Review of feature boundary identification techniques for the characterization of tessellated surfaces'. Surface Topography: Metrology and Properties, Surf. Topogr.: Metrol. Prop. 3 (2015) 013002 (1). pp. 013002 - 013002.Open Access Link
Mousavi, A., Komashie, A., Clarkson, J. and Young, T. (2015) 'An integrated model of patient and staff satisfaction using queuing theory'. IEEE Journal of Translational Engineering in Health and Medicine, 3 (2015). pp. 1 - 10. ISSN: 2168-2372 Open Access Link
Ji, S., Yan, F. and Fan, Z. (2015) 'Development of a high strength Al-Mg2Si-Mg-Zn based alloy for high pressure die casting'. Materials Science and Engineering A, 626. pp. 165 - 174. ISSN: 0921-5093 Open Access Link
Butt, HSU., Xue, P., Jiang, TZ. and Wang, B. (2015) 'Parametric identification for material of viscoelastic SHPB from wave propagation data incorporating geometrical effects'. International Journal of Mechanical Sciences, 91. pp. 46 - 54. ISSN: 0020-7403
Wang, B. and Wiercigroch, M. (2015) 'Forward: Special issue in honour of professor Steve R. Reid FREng FRSE'. International Journal of Mechanical Sciences, 91. pp. 1 - 2. ISSN: 0020-7403
Fern, G., Silver, J. and Coe-Sullivan, S. (2015) 'Cathodoluminescence and electron microscopy of red quantum dots used for display applications'. Journal of the Society for Information Display, 23 (2). pp. 50 - 55. ISSN: 1071-0922 Open Access Link
Chang, I., Tucker, D., Su, S. and Brown, PB. (2015) 'Low Temperature Synthesis of Boron Carbide Powders'.39th International Conference & Exposition on Advanced Ceramics and Composites. Florida. 25 - 30 January. Conference Proceedings - 39th ICACC.