Ling, H., Dai, X., Wang, W. and JI, SHOUXUN. (1995) 'Study on the Technology of Anti-adhering Mould in No-bake Process (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1995 (01). pp. 44 - 49. ISSN: 1001-3814

Ghobadian, A., Liu, J., Gallear, D., Woo, H. and Viney, H. (1995) 'Practical considerations for the implementation of Total Quality Management'. Kuala Lumpar. 19 - 21 January. Proceedings of International Management Accounting Conference.

Ji, S. (Accepted) 'Compact punching die for highway shield plate'.Open Access Link

Bahai, H., Esat, II. and Rass, L. (1995) 'A factorial design approach to investigate the effect of geometry in drill string screw connectors.'. Journal of Energy Resources Technology, 117 (2). pp. 101 - 107. ISSN: 0195-0738

Eskin, DG. (1995) 'The effect of alloying additives on structure and properties of cast Al-Cu-Si-Mg alloys'. Zeitschrift fuer Metallkunde, 86 (1). pp. 60 - 63. ISSN: 0044-3093

Rokhlin, LL., Kharakterova, ML., Eskin, D. and Dobatkina, TV. (1995) 'New aluminum alloys containing scandium'. Advanced Materials. pp. 139 - 146.

Bonser, RH. (1995) 'Longitudinal variation in mechanical competence of bone along the avian humerus'. Journal of Experimental Biology, 198 (Pt 1). pp. Pt 1/ - Pt 1/. ISSN: 0022-0949

Winter, M. (1995) 'Large time asymptotics for a class of wave equations of higher order with a variable coefficient and time-independent incitation'. Mathematical Methods in the Applied Sciences, 18 (1). pp. 1 - 25. ISSN: 0170-4214

Winter, M. (1995) 'Asymptotic characterization of standing waves and of the static limit for a class of wave equations of higher order with a variable coefficient and time-independent incitation'. Mathematical Methods in the Applied Sciences, 18 (2). pp. 147 - 168. ISSN: 0170-4214

Kaplunov, YD. and Nol'de, YV. (1995) 'A quasifront in the problem of the action of an instantaneous point impulse at the edge of a conical shell'. Journal of Applied Methematics and Mechanics, 59 (5). pp. 773 - 780. ISSN: 0021-8928

Lopez, C., Bosque, R., Solans, X., Font-Bardia, M., Silver, J. and Fern, G. (1995) 'Palladium(II)-induced preferential activation of the σ[Csp2(phenyl)–Cl] bond versusσ[Csp2(ferrocene)–H]. Crystal structure of [Fe(η5-C5H5){η5-C5H4CH2NCH(C6H3Cl2-2,6)}]'. Journal of the Chemical Society. pp. 4053 - 4058. ISSN: 0300-9246

Lopez, C., Bosque, R., Solans, X., Font-Bardia, M., Silver, J. and Fern, G. (1995) 'Alkyne insertions into the σ-Pd–C(sp2, ferrocene) bond of cyclopalladated complexes containing Schiff bases derived from ferrocene. Crystal structures of [Pd{[(EtCCEt)2(η5-C5H3CRNCH2Ph)]Fe(η5-C5H5)}Cl](R = H or Me)'. Journal of the Chemical Society. pp. 1839 - 1849. ISSN: 0300-9246

Hari Babu, N., Rajasekharan, T., Ravi, S. and Seshu Bai, V. (1995) 'Universal behavior of susceptibility in the 110 K phase of the Bi-Pb-Sr-Ca-Cu-O system'. Physical Review B, 52 (18). pp. 13605 - 13610. ISSN: 0163-1829

Rees, DWA. and Li, RKY. (1995) 'Invariant polynomials for composite strength'. Key Engineering Materials: Advances in Engineering Materials, 99-100. pp. 51 - 56. ISSN: 1662-9795

Kuczma, MS. and Whiteman, JR. (1995) 'Variational inequality formulation for flow theory plasticity'. International Journal of Engineering Science, 33 (8). pp. 1153 - 1169. ISSN: 0020-7225

Ghobadian, A., Liu, J., Gallear, D., Woo, H., Stainer, A. and Stainer, L. (1995) 'Baldrige and European Quality Awards - Similarities and Dissimilarities', in Sumanth, D J., Edosomwan, J A., Poupart, R. and Thor, C G. (eds.) Productivity & Quality Management Frontiers-V. Norcross : Industrial Engineering Management Press. pp. 211 - 222. ISBN 10: 0-89806-148-2.

Rees, DWA. (1995) 'Plastic flow in the elliptical bulge test'. International Journal of Mechanical Sciences,, 37 (4). pp. 373 - 389. ISSN: 0020-7403

Janovsky, V., Shaw, S., Warby, MK. and Whiteman, JR. (1995) 'Numerical methods for treating problems of viscoelastic isotropic solid deformation'. Journal of Computational and Applied Mathematics, 63 (1-3). pp. 91 - 107. ISSN: 0377-0427

Stolworthy, CIM. and Rees, DWA. (1995) 'Macroscopic characterisation of failure in composites materials'. Key Engineering Materials: Advances in Engineering Materials, 99-100. pp. 43 - 50. ISSN: 1662-9795

Mücke, R. and Whiteman, JR. (1995) 'A posteriori error estimates and adaptivity for finite element solutions in finite elasticity'. International Journal for Numerical Methods in Engineering, 38 (5). pp. 775 - 795. ISSN: 0029-5981

Abrahams, ID. and Lawrie, JB. (1995) 'Travelling waves on a membrane: reflection and transmission at a corner of arbitrary angle. I'. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 451 (1943). pp. 657 - 683. ISSN: 1364-5021

Abrahams, ID. and Lawrie, JB. (1995) 'On the factorization of a class of Wiener-Hopf kernels'. IMA Journal of Applied Mathematics, 55 (1). pp. 35 - 47. ISSN: 0272-4960 Open Access Link

Rees, DWA. (1995) 'Tensile flow and instability in galvanized, rolled steel sheet'. The Journal of Strain Analysis for Engineering Design, 30 (4). pp. 305 - 315. ISSN: 0309-3247

Rees, DWA. (1995) 'Instability limits to the forming of sheet metals'. Journal of Materials Processing Technology, 55 (3). pp. 146 - 153. ISSN: 0924-0136

Ghobadian, A., Liu, J., Gallear, D., Woo, H., Stainer, A. and Stainer, L. (1995) 'A Conceptual Framework for the Design of Quality Measurement Systems', in Sumanth, D J., Edosomwan, J A., Poupart, R. and Thor, C G. (eds.) Productivity & Quality Management Frontiers-V. Norcross : Industrial Engineering Management Press. pp. 34 - 41. ISBN 10: 0-89806-148-2.

Thomas, PJ., Meech, JF. and Macredie, RD. (1995) 'Framework for the development of information appliances'. Proceedings of the ACM Symposium on Applied Computing. pp. 396 - 400.

Hone, KS., Series, RW. and Baber, C. (1995) 'AN EXPERIMENTAL INVESTIGATION OF THE INPUT AND ERROR CORRECTION STRATEGIES USED BY SUBJECTS ENTERING DIGITS WITH THE AURIX SPEECH RECOGNISER'. 4th European Conference on Speech Communication and Technology Eurospeech 1995. pp. 1445 - 1448.

Kalganova, T. and Shmerko, VP. (1995) 'The System for Automatic Input, Processing and Authentic Confirmation of Documents and Commersial Papers'. Place of publication: Belarusian State University of Informatics and Radioelectronics.

Chang, ITH., Cantor, B., Leigh, PA. and Dobson, PJ. (1995) 'Fabrication of Si/SiO2 nanocomposite thin films'. Nanostructured Materials, 6 (5-8). pp. 835 - 838. ISSN: 0965-9773

Fleuriot, C., Lees, DY., Macredie, RD., Thomas, PJ. and Meech, JF. (1995) 'Interface engineering in an office information appliance'.Conference companion. ACM Press. pp. 242 - 243.

Fan, Z. (1995) 'A new approach to the electrical resistivity of two-phase composites'. Acta Metallurgica et Materialia, 43 (1). pp. 43 - 49. ISSN: 0956-7151

Fang, CM., Ettema, ARHF., Haas, C., Wiegers, GA., van Leuken, H. and de Groot, RA. (1995) 'Electronic structure of the misfit-layer compound (SnS)1.17NbS2deduced from band-structure calculations and photoelectron spectra'. Physical Review B, 52 (4). pp. 2336 - 2347. ISSN: 0163-1829

Kalganova, T. and Shmerko, VP. (1995) 'Technology Development to Use the Applied Theory of Logical Differential Calculus'. Place of publication: Belarusian State University of Informatics and Radioelectronics.

FAN, ZY. (1995) 'A NEW APPROACH TO THE ELECTRICAL-RESISTIVITY OF 2-PHASE COMPOSITES'. ACTA METALLURGICA ET MATERIALIA, 43 (1). pp. 43 - 49. ISSN: 0956-7151

Kalganova, T. and Shmerko, VP. (1995) 'Working out Methods and Algorithms of Logic Algebra (in Russian)'. Place of publication: Belarusian State University of Informatics and Radioelectronics.

Kalganova, T. (1995) 'Adaptation and forming the specialized program teaching complex for system of clerical work and stroke identification to the branches requirements (in Russian)'. Place of publication: Belarusian State Economic University.

Huang, Y. and Young, RJ. (1995) 'Effect of fibre microstructure upon the modulus of PAN- and pitch-based carbon fibres'. Carbon, 33 (2). pp. 97 - 107. ISSN: 0008-6223

ROMANO, G. and ALFANO, G. (1995) 'Multivaluedness in structural mechanics with applications to plasticity'.2nd International Conference on Contact Mechanics. FERRARA, ITALY. 1 COMPUTATIONAL MECHANICS PUBLICATIONS LTD. pp. 19 - 28.

Thomas, PJ., Meech, JF. and Macredie, RD. (1995) 'Personal information appliances'.6th International Conference on Human-Computer Interaction (HCI International 95). TOKYO, JAPAN. Elsevier. pp. 945 - 950. ISSN: 0921-2647

Lu, G., Ong, LS., Wang, B. and Ng, HW. (1994) 'An experimental study on tearing energy in splitting square metal tubes'. International Journal of Mechanical Sciences, 36 (12). pp. 1087 - 1097. ISSN: 0020-7403

Fan, Z. and Miodownik, AP. (1994) 'TEM study of metastable β-phase decomposition in rapidly solidified Ti-6Al-4V alloy'. Journal of Materials Science, 29 (24). pp. 6403 - 6412. ISSN: 0022-2461

Fan, Z. (1994) 'The β→ω transformation during room temperature aging in rapidly solidified Ti-6Al-4V alloy'. Scripta Metallurgica et Materialia, 31 (11). pp. 1519 - 1524. ISSN: 0956-716X

Fan, Z. (1994) 'Observation of β→ω transformation at room temperature in rapidly solidified Ti–7·5Mn–0·5B alloy using transmission electron microscopy'. Materials Science and Technology, 10 (12). pp. 1021 - 1025. ISSN: 0267-0836

Scamans, GM., Creber, DK., Stannard, JH. and Tregenza, JE. (1994) 'Aluminum fuel cell power sources for long range unmanned underwater vehicles'. IEEE Sympsium on Autonomous Underwater Vehicle Technology. pp. 179 - 186.

Mares, C., Surace, G. and Mares, C. (1994) 'Detection of Structural Damage Using a Genetic Algorithm Approach'.PICAST 2-AAC 6 Second Pacific International Aerospace Science and Technology Conference/Sixth Australian Aeronautical Conference. Melbourne, Australia.

Ji, S., Zhang, J., Wan, L. and Yang, G. (1994) 'New Method to Describe the Capability of Reclaimer in Resin Bonded Sand (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1994 (06). pp. 26 - 30. ISSN: 1001-3814

Wang, Y., Lorimer, GW. and Sale, FR. (1994) 'Microstructural development during consolidation of rapidly solidified AlFeVSi powder by VHP, extrusion and rolling'. Scripta Metallurgica et Materialia, 31 (10). pp. 1337 - 1342. ISSN: 0956-716X

Ghobadian, A., Liu, J., Gallear, D. and Woo, H. (1994) 'Practical Considerations for the Implementation of Total Quality Management'. Timisoara. 1 - 3 November. Proceedings of International Symposium on Management.

Ma, W., Ji, S., Zhang, J. and Yang, G. (1994) 'Design consideration for production line using full mould casting (in Chinese)'. China Foundry Equipment and Technology, 1994 (5). pp. 48 - 53. ISSN: 1006-9658

Avis, N. and Macredie, R. (1994) 'Problems, possibilities and potential'. Computer Bulletin London, 6 (Ser 4 pt 5). pp. 8 - 9. ISSN: 0010-4531

HAICHUNGAO., YANHUO., CHANGMINGFANG., CHANGMINSUN. and YIZHANG. (1994) 'Ionic conduction in oxysulfide glasses for the Li2SB2O3 (LiBr) systems'. Solid State Ionics, 73 (1-2). pp. 99 - 103. ISSN: 0167-2738