Earnshaw, R., Macredie, R. and Vince, J. (1995) 'Editorial'. Virtual Reality, 1 (2). pp. I - I. ISSN: 1359-4338

Thomas,, P. and Macredie,, R. (1995) 'Introduction to the Special Issue'. Journal of Intelligent Systems, 5 (2-4). pp. 79 - 88. ISSN: 0334-1860

Wang, B., Yu, TX. and Reid, SR. (1995) 'Out-of-Plane Impact at the Tip of a Right-Angled Bent Cantilever Beam'. Journal of Applied Mechanics, 62 (4). pp. 887 - 892. ISSN: 0021-8936

Chang, ITH., Balcers, O. and Cantor, B. (1995) 'Effect of added Mo on the crystallization behaviour of rapidly solidified Fe70Cr20B10 alloys'. International Journal of Rapid Solidification, 9 (1). pp. 63 - 73. ISSN: 0265-0916

Chang, ITH. and Cantor, B. (1995) 'Temperature, composition and microstructure variations during pulsed laser irradiation of a deposited film on a substrate'. Acta Metallurgica et Materialia, 43 (12). pp. 4411 - 4420. ISSN: 0956-7151

Mares, C. and Surace, C. (1995) 'Finite Element Updating Using a Genetic Algorithm'.2nd International Conference on Structural Dynamics Modelling, Test, Analysis and Correlation, NAFEMS/DTA. Cumbria, UK.

Mikhailov, SE. (1995) 'A FUNCTIONAL APPROACH TO NON-LOCAL STRENGTH CONDITIONS AND FRACTURE CRITERIA - I. BODY AND POINT FRACTURE'. ENGINEERING FRACTURE MECHANICS, 52 (4). pp. 731 - 743. ISSN: 0013-7944

Mikhailov, SE. (1995) 'A FUNCTIONAL APPROACH TO NON-LOCAL STRENGTH CONDITIONS AND FRACTURE CRITERIA - II. DISCRETE FRACTURE'. ENGINEERING FRACTURE MECHANICS, 52 (4). pp. 745 - 754. ISSN: 0013-7944

Cheng, K. and Rowe, WB. (1995) 'A selection strategy for the design of externally pressurized journal bearings'. Tribology International, 28 (7). pp. 465 - 474. ISSN: 0301-679X

Harrison, D., Billet, E. and Billingsley, J. (1995) 'Novel circuit fabrication techniques for reduced environmental impact'.IEE/IEEE International Conference on Clean Electronics. Edinburgh, UK. 9 - 11 October. IEEE. pp. 174 - 175. ISSN: 0537-9989 Open Access Link

Kalganova, T., Zaitseva, E., Kochergov, E. and Bondar, I. (1995) 'Synthesis of Two Dimensional Logic Polynomial Forms of Multiple-Valued Functions of Logic Algebra.'. Szczecin, Poland. 1 Proc. of the 2nd Int’l Conf. on Applications of Computer Systems. pp. 131 - 138.

Kalganova, T. and Zaitseva, EN. (1995) 'Using of the Digital Orthogonal Transformations for Solving of the Integer Programming Problems. (in Russian)'. Zielona Gora, Poland. 1 Proc. of the 17th International Symposium of Students and Young Scientists. pp. 167 - 171.

Lu, G. and Wang, B. (1995) 'A simple method for first dynamic mode of plastic deformation for suddenly loaded beams'. International Journal of Impact Engineering, 16 (5-6). pp. 833 - 840. ISSN: 0734-743X

Wang, B. (1995) 'On the large plastic deformation of tubular beams under impact loading'. Structural Engineering and Mechanics, 3 (5). pp. 463 - 474. ISSN: 1225-4568

Wang, B. (1995) 'Yield mechanisms of stepped cantilevers subjected to a dynamically applied constant tip force'. Structural Engineering and Mechanics, 3 (5). pp. 445 - 462. ISSN: 1225-4568

Ghobadian, A., Gallear, D., Liu, J. and Bamford, D. (1995) 'TQM at Betts Plastics'.11th National Conference on Manufacturing Research. De Montfort University, Leicester, UK. 12 - 14 September. TAYLOR & FRANCIS LTD. pp. 529 - 533.

Mikhailov, SE. (1995) 'To singular stress asymptotics in bonded hereditarily-elastic aging bodies'.1st International Conference on Mechanics of Time Dependent Materials. LJUBLJANA, SLOVENIA. 11 - 13 September. SOC EXPERIMENTAL MECHANICS INC. pp. 330 - 335.

Kalganova, T., Kochergov, EG., Ryzhkovich, LR. and Cheushev, VA. (1995) 'The Dictionary Support Algorithm of the Text Recognition Based on Multivariant Classification. (in Russian)'. Minsk, Republic of Belarus. Proc. of the 3rd Int. Conf. on Pattern Recognition and Information Processing. pp. 11 - 16.

Kalganova, T., Kochergov, E., Sanko, A. and Zaitseva, E. (1995) 'Genetic Algorithm to Optimize Analytical Description of Multiple-Valued Functions.'. Minsk, Republic of Belarus. Proc. of the Int’l Conf. on Computer-Aided Design of Discrete Devices.. pp. 115 - 122.

Kaplunov, YD. and Nol'de, EV. (1995) 'The quasi-front in the problem of action of an instantaneous concentrated pulse on the edge of a conical shell'. Prikladnaya Matematika I Mekhanika, 59 (5). pp. 803 - 811. ISSN: 0032-8235

Ji, S. (Accepted) 'Punching and glazing machine for semi-finished pottery'.

Huang, Y. and Young, RJ. (1995) 'Interfacial behaviour in high temperature cured carbon fibre/epoxy resin model composite'. Composites, 26 (8). pp. 541 - 550. ISSN: 0010-4361

Wang, B. and Reid, SR. (1995) 'Large-Deflection Analysis of Whipping Pipes. II: Rigid, Perfectly-Plastic Beam Model with Elastic Root Spring'. Journal of Engineering Mechanics, 121 (8). pp. 888 - 895. ISSN: 0733-9399

Reid, SR. and Wang, B. (1995) 'Large-Deflection Analysis of Whipping Pipes. I: Rigid, Perfectly-Plastic Model'. Journal of Engineering Mechanics, 121 (8). pp. 881 - 887. ISSN: 0733-9399

Yang, Q., Butler, C. and Baird, P. (1995) 'Probe error modelling using artificial neural networks'.ISMQC'95 & CIMI'95. Zaragoza, Spain. Proceedings of International IMEKO Conference ISMQC 95/CIMI 95. pp. 406 - 413.

FANG, CM., MEETSMA, A. and WIEGERS, GA. (1995) 'ChemInform Abstract: Crystal Structure of Erbium Sesquiselenide, Er2Se3.'. ChemInform, 26 (29). ISSN: 0931-7597

Ql, K. and Huang, R. (1995) 'Rheological Behavior of Polyethersulfone (PES)'. International Journal of Polymeric Materials and Polymeric Biomaterials, 29 (3-4). pp. 157 - 164. ISSN: 0091-4037

Macredie, R. (1995) 'Editorial'. Virtual Reality, 1 (1). ISSN: 1359-4338

Cheng, K. and Rowe, WB. (1995) 'Hypermedia as a tool'. Computing & Control Engineering Journal, 6 (3). pp. 123 - 130. ISSN: 0956-3385

Ji, S. (Accepted) 'A height control valve for lost foam process'.Open Access Link

Ji, S., Gao, J. and Huang, C. (1995) 'Drilling and glazing machine for porcelain products'.

Bonser, RHC. (1995) 'Melanin and the abrasion resistance of feathers'. Condor, 97 (2). pp. 590 - 591. ISSN: 0010-5422

Cheng, K. and Rowe, WB. (1995) 'Human-computer interaction issues in developing a bearing design support system: a case study'. Computer Integrated Manufacturing Systems, 8 (2). pp. 125 - 132. ISSN: 0951-5240

Gao, J., Ye, S., Ji, S. and Zhang, J. (1995) 'Centrifugal coating spraying device for casting'.

Fan, Z., Miodownik, AP., Chandrasekaran, L. and Ward-Close, CM. (1995) 'Microstructural investigation of a rapidly solidified Ti-6Al-4V-1B-0.5Y alloy'. Journal of Materials Science, 30 (7). pp. 1653 - 1660. ISSN: 0022-2461

Wang, B., Lu, G. and Lim, MK. (1995) 'Experimental and numerical analysis of the response of aluminium oxide tiles to impact loading'. Journal of Materials Processing Technology, 51 (1-4). pp. 321 - 345. ISSN: 0924-0136

Zhang, J., Ji, S. and Yang, G. (1995) 'Charing pail'.

Bonser, RHC. and Purslow, PP. (1995) 'The Youngs-modulus of feather keratin'. Journal of Experimental Biology, 198 (4). pp. 1029 - 1033. ISSN: 0022-0949

Wang, B., Lu, G. and Yu, TX. (1995) 'A numerical analysis of the large deflection of an elastoplastic cantilever'. Structural Engineering and Mechanics, 3 (2). pp. 163 - 172. ISSN: 1225-4568

Gopalan, R., Roy, T., Rajasekharan, T., Rangarajan, G. and Hari Babu, N. (1995) 'Microstructural and magnetisation study in melt-grown YBaCuO samples'. Physica C: Superconductivity, 244 (1-2). pp. 106 - 114. ISSN: 0921-4534

Harrison, D. and Meng, T. (1995) 'A conceptual quality performance model: Quality world'. Technical Journal of the Institute of Quality Assurance. pp. 44 - 47.

Fang, CM., Meetsma, A. and Wiegers, GA. (1995) 'Crystal structure of erbium sesquiselenide, Er2Se3'. Journal of Alloys and Compounds, 218 (2). pp. 224 - 227. ISSN: 0925-8388

Fan, Z., Chandrasekaran, L., Ward-Close, CM. and Miodownik, AP. (1995) 'The effect of pre-consolidation heat treatment on TiB morphology and mechanical properties of rapidly solidified Ti-6Al-4V-XB alloys'. Scripta Metallurgica et Materialia, 32 (6). pp. 833 - 838. ISSN: 0956-716X

Gao, J., Ji, S., Zhang, J. and Yang, G. (1995) 'Development of a core-making machine with two working stations (in Chinese)'. China Foundry Machinery & Technology, 1995 (01). pp. 51 - 54. ISSN: 1006-9658

Reid, SR., Wang, B. and Yu, TX. (1995) 'Yield mechanisms of a bent cantilever beam subjected to a suddenly applied constant out-of-plane tip force'. International Journal of Impact Engineering, 16 (1). pp. 49 - 73. ISSN: 0734-743X

Reid, SR., Wang, B. and Hua, YL. (1995) 'Triple plastic hinge mechanism for a bent cantilever beam subjected to an out-of-plane tip force pulse of finite duration'. International Journal of Impact Engineering, 16 (1). pp. 75 - 93. ISSN: 0734-743X

Fan, Z. (1995) 'The grain size dependence of ductile fracture toughness of polycrystalline metals and alloys'. Materials Science and Engineering: A, 191 (1-2). pp. 73 - 83. ISSN: 0921-5093

Ji, S., Zhang, J., Wan, L. and Zhang, Y. (1995) 'The design of 3-D vibrating compact table for the EPC process with dry sands (in Chinese)'. Journal of Huazhong University of Science and Technology(Natural Science Edition), 1995 (vol. 23, No 1). pp. 68 - 71. ISSN: 1671-4512

Ji, S., Wei, H., Zhang, J. and Yang, G. (1995) 'A CAD System for Patterns Design in Green Sand Technology (in Chinese)'. Journal of Huazhong University of Science and Technology(Natural Science Edition), 1995 (01). pp. 109 - 112. ISSN: 1671-4512

Ji, S., Wan, L., Zhang, J. and Yang, G. (1995) 'A Microcomputer Control System for the Moulding Machine in Full Mould Process (in Chinese)'. Journal of Huazhong University of Science and Technology(Natural Science Edition), 23 (1995) (1). pp. 72 - 76. ISSN: 1671-4512

Ling, H., Dai, X., Wang, W. and JI, SHOUXUN. (1995) 'Study on the Technology of Anti-adhering Mould in No-bake Process (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1995 (01). pp. 44 - 49. ISSN: 1001-3814