Holroyd, NJH. and Scamans, GM. (2011) 'Crack Propagation During Sustained-Load Cracking of Al-Zn-Mg-Cu Aluminum Alloys Exposed to Moist Air or Distilled Water'. Metallurgical and Materials Transactions A, 42 (13). pp. 3979 - 3998. ISSN: 1073-5623

Silver, J., Withnall, R., Li, R., Lipman, A., Marsh, PJ., Fern, GR., Tarverdi, K., Bishop, P. and Thiebaut, B. et al. (2011) 'Iron doped lithium aluminate embedded in polypropylene as a potential infra-red emitter for stimulating plant growth'.18th International Display Workshops (IDW '11). Nagoya Congress Ctr, Nagoya, JAPAN. 1 - 9 December. INST IMAGE INFORMATION & TELEVISION ENGINEERS. pp. 1409 - 1412. ISSN: 1883-2490

Wang, C., Noh, Y., Ebihara, K., Tokumoto, M., Okuyama, I., Terunaga, C., Yusuke, M., Ishii, H., Takanishi, A., Hatake, K. and Shoji, S. et al. (2011) 'Development of a novel flow sensor to acquire quantitative information on BVM operation during airway management training'.2011 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. pp. 269 - 274.

Huang, Y., Wang, L., Liu, Y., Zhao, Z., Wu, JT. and Yan, P. (2011) 'Effects of alloying elements on oxidation behavior of a Ni-base superalloy at 1223 K'. Cailiao Rechuli Xuebao Transactions of Materials and Heat Treatment, 32 (12). pp. 1 - 6. ISSN: 1009-6264

Wang, C., Noh, Y., Ishii, H., Kikuta, G., Ebihara, K., Tokumoto, M., Okuyama, I., Yusuke, M., Terunaga, C., Takanishi, A. and Hatake, K. et al. (2011) 'Development of a 3D simulation which can provide better understanding of trainee's performance of the task using airway management training system WKA-1RII'.2011 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. pp. 2635 - 2640.

Bin Hussin, MF., Noor, SZM., Wang, B. and Hipnie, R. (2011) 'Investigation in the readability and reliability of Basic Offshore Safety and Emergency (B.O.S.E.T) test'.2011 IEEE Colloquium on Humanities, Science and Engineering (CHUSER). IEEE. pp. 364 - 369.

Harris, P., Covill, D., Chappell, D., Constanda, C., Ahues, M., Bodmann, B., De Campos Velho, H., Kirsch, A., Mikhailov, S., Mitrea, D., Nastase, A., Pérez, E., Potapenko, S. and Ruotsalainen, K. et al. (2011) 'Preface'. Integral Methods in Science and Engineering Computational and Analytic Aspects. pp. vii - viii.

Ebihara, K., Noh, Y., Sato, K., Wang, C., Ishii, H., Takanishi, A., Kazuyuki, H. and Shoji, S. et al. (2011) 'Development of airway management training system WKA-4: Control system for simulation of real world condition of patient's motion'.2011 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. pp. 1029 - 1034.

Withnall, R., Silver, J., Catherall, C., Ireland, TG., Fern, GR., Sumner, JWS., Shields, P., Allsopp, D., Reip, PW. and Subbiah, S. et al. (2011) 'Incorporating cerium doped yttrium aluminium garnet (YAG:Ce3+) nanophosphors into gallium nitride LEDs based on photonic crystals'.18th International Display Workshops (IDW '11). Nagoya Congress Ctr, Nagoya, JAPAN. 1 - 9 December. INST IMAGE INFORMATION & TELEVISION ENGINEERS. pp. 1413 - 1416. ISSN: 1883-2490

Zhang, L., Eskin, DG., Miroux, AG. and Katgerman, L. (2011) 'On the mechanism of the formation of primary intermetallics under ultrasonic melt treatment in an Al-Zr-Ti alloy'. Iop Conference Series Materials Science and Engineering. ISSN: 1757-8981

Fan, Z. and Stone, IC. (2011) 'Solidification Science and Technology'. Uxbridge: Brunel University Press. ISSN 13: 978-1-902316-99-4

Silver, J., Yan, X., Withnall, R., Fern, G., Sumner, J., Shields, P. and Allsopp, D. et al. (2011) 'Embedding manganese doped zinc sulfide quantum dots in gallium nitride LEDs based on photonic crystals'.18th International Display Workshops (IDW '11). Nagoya Congress Ctr, Nagoya, JAPAN. 1 - 9 December. INST IMAGE INFORMATION & TELEVISION ENGINEERS. pp. 1405 - 1408. ISSN: 1883-2490

Gosler, AG., Connor, OR. and Bonser, RHC. (2011) 'Protoporphyrin and Eggshell Strength: Preliminary Findings from a Passerine Bird'. Avian Biology Research, 4 (4). pp. 214 - 223. ISSN: 1758-1559

Shahab, S., Mirtaheri, M., Mirzaeifar, R. and Bahai, H. (2011) 'Modifying the Shear Buckling Loads of Metal Shear Walls for Improving Their Energy Absorption Capacity'. Advances in Structural Engineering, 14 (6). pp. 1247 - 1257. ISSN: 1369-4332

Lockton, D., Cain, R., Harrison, D., Giudice, S., Nicholson, L. and Jennings, P. (2011) 'Behaviour change at work: Empowering energy efficiency in the workplace through user-centred design'.Behavior, Energy & Climate Change 2011. Washington, DC. 30 - 2 December. University of California eScholarship Repository.Open Access Link

Atherton, MA., Brown, CJ., Isherwood, J. and Quinn, J. (Accepted) 'Water purification device and method'.

Vanat, Q., Wang, B., Esat, M. and Chizari, M. (2011) 'A biomechanical consideration on immediate post operative mobilisation after medial ulnar collateral ligament reconstruction'.World Congress on Engineering (WCE 2011). Imperial Coll, London, UNITED KINGDOM. 14 - 8 July. INT ASSOC ENGINEERS-IAENG. pp. 2667 - 2670. ISSN: 2078-0958

Mohajeri, N., Raste, R. and Daneshvar, S. (2011) 'An obstacle detection system for blind people'.World Congress on Engineering (WCE 2011). Imperial Coll, London, UNITED KINGDOM. 14 - 8 July. INT ASSOC ENGINEERS-IAENG. pp. 1602 - 1605. ISSN: 2078-0958

Daneshvar, S., Elyasi, M. and Danishvar, M. (2011) 'Multispectral and panchromatic images fusion based on integrating feedback retina and IHS model'.World Congress on Engineering (WCE 2011). Imperial Coll, London, UNITED KINGDOM. 14 - 8 July. INT ASSOC ENGINEERS-IAENG. pp. 1614 - 1618. ISSN: 2078-0958

van Huis, MA., Figuerola, A., Fang, C., Béché, A., Zandbergen, HW. and Manna, L. (2011) 'Chemical Transformation of Au-Tipped CdS Nanorods into AuS/Cd Core/Shell Particles by Electron Beam Irradiation'. Nano Letters, 11 (11). pp. 4555 - 4561. ISSN: 1530-6984

Zhang, Z., Xu, S. and Wang, B. (2011) 'Adaptive actuator failure compensation with unknown control gain signs'. IET Control Theory & Applications, 5 (16). pp. 1859 - 1867. ISSN: 1751-8644

Tirumalasetty, GK., van Huis, MA., Fang, CM., Xu, Q., Tichelaar, FD., Hanlon, DN., Sietsma, J. and Zandbergen, HW. et al. (2011) 'Characterization of NbC and (Nb,Ti)N nanoprecipitates in TRIP assisted multiphase steels'. Acta Materialia, 59 (19). pp. 7406 - 7415. ISSN: 1359-6454

Makanjuola, JK., Grange, P., Aggoun, A., Rouse, P., Lanigan, P., Swash, M. and Yamamoto, H. et al. (2011) 'A revolutionary dimension in imaging and minimal access therapy'. JOURNAL OF ENDOUROLOGY, 25. pp. A65 - A66. ISSN: 0892-7790

Gratton, G., Mares, C. and Saeed, B. (2011) 'A feasibility assessment of annular winged VTOL flight vehicles'. The Aeronautical Journal, 115 (1173). pp. 683 - 692. ISSN: 0001-9240

Ding, H., Chen, S-J., Ibrahim, R. and Cheng, K. (2011) 'Investigation of the size effect on burr formation in two-dimensional vibration-assisted micro end milling'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (11). pp. 2032 - 2039. ISSN: 0954-4054

Hall, A. and Scamans, G. (2011) 'Aluminum for auto body sheet'. Light Metal Age, 69 (6). pp. 6 - 17. ISSN: 0024-3345

Hobson, PR., Leslie, DE. and Smith, DR. (2011) 'Effect of gamma radiation on potential ionising radiation detectors and dosimeters based on quantum dots'.2011 IEEE Nuclear Science Symposium and Medical Imaging Conference. Valencia, Spain. 23 - 29 October. IEEE. pp. 3015 - 3017. ISSN: 1082-3654

Winter, M. and Wei, J. (2011) 'Spiky patterns in a tritrophic food chain model'.International Workshop on Modeling and Analysis of PDE Systems of Biological Processes. Capital Normal University, Beijing. 18 - 21 October. [unpublished]

Daneshvar, S., Pourghassem, H., Danishvar, M. and Ghassemian, H. (2011) 'Combination of feature and pixel level image fusion with feedback retina and IHS model'. Iaeng International Journal of Computer Science, 38 (3). pp. 302 - 308. ISSN: 1819-656X

Smith, DR. and Cole, J. (2011) 'Development and evaluation of an undergraduate multidisciplinary project activity in engineering and design'.The Clute Institute International Academic Conference. Las Vegas. 10 - 12 October. Clute Institute. pp. 285 - 295. ISSN: 1539-8757

Mousavi, A. (2011) 'Introduction to Systems Modelling and Simulation”, Ed 3, Course Book'.

Kumar, S., Hari Babu, N., Scamans, GM. and Fan, Z. (2011) 'Influence of intensive melt shearing on the microstructure and mechanical properties of an Al-Mg alloy with high added impurity content'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42 (10). pp. 3141 - 3149. ISSN: 1073-5623 Open Access Link

Zuo, Y., Jiang, B., Enright, P., Scamans, GM. and Fan, Z. (2011) 'Degassing of LM24 Al alloy by intensive melt shearing'. International Journal of Cast Metals Research, 24 (5). pp. 307 - 313. ISSN: 1364-0461

Weider, SZ., Swinyard, BM., Kellett, BJ., Howe, CJ., Joy, KH., Crawford, IA., Gow, J. and Smith, DR. et al. (2011) 'Planetary X-ray fluorescence analogue laboratory experiments and an elemental abundance algorithm for C1XS'. Planetary and Space Science, 59 (13). pp. 1393 - 1407. ISSN: 0032-0633

Chizari, M., Snow, M. and Wang, B. (2011) 'Post-Operative Assessment of an Implant Fixation in Anterior Cruciate Ligament Reconstructive Surgery'. Journal of Medical Systems, 35 (5). pp. 941 - 947. ISSN: 0148-5598

Lalpoor, M., Eskin, DG. and Katgerman, L. (2011) 'Thermal expansion/contraction behavior of AA7050 alloy in the as-cast condition relevant to thermomechanical simulation of residual thermal stresses'. International Journal of Materials Research, 102 (10). pp. 1286 - 1293. ISSN: 1862-5282

Simolowo, FE., Mousavi, A. and Adjapong, PO. (2011) 'A computer-based product classification and component detection for demanufacturing processes'. International Journal of Computer Integrated Manufacturing, 24 (10). pp. 900 - 914. ISSN: 0951-192X Open Access Link

Gegov, EA., Gegov, AE., Atherton, MA. and Gobet, FR. (2011) 'Evolution-based modelling of complex airport networks'.Special International Conference on Complex Systems: Synergy of Control, Communications and Computing. Ohrid, Macedonia. 16 - 20 September. Society for Electronics, Telecommunications, Automation, and Informatics.Open Access Link

Headings, NS., Hayden, SM., Kulda, J., Babu, NH. and Cardwell, DA. (2011) 'Spin anisotropy of the magnetic excitations in the normal and superconducting states of optimally doped YBaCuO studied by polarized neutron spectroscopy'. Physical Review B - Condensed Matter and Materials Physics, 84 (10). ISSN: 1098-0121 Open Access Link

Smith, DR. and Cole, J. (2011) 'Enhancing the employability of Brunel students: Assessment and evaluation of a Level 1 multidisciplinary project based teaching activity in the School of Engineering and Design'.Open Access Link

Fang, CM., van Huis, MA., Jansen, J. and Zandbergen, HW. (2011) 'Role of carbon and nitrogen in Fe2C and Fe2N from first-principles calculations'. Physical Review B, 84 (9). ISSN: 1098-0121

Zhou, X. and Oladiran, O. (2011) 'Assessment of Restrained Shrinkage Cracking of Concrete with Elliptical Ring Specimens – Preliminary Results'.International RILEM Conference on Advances in Construction Materials through Science and Engineering. Hong Kong. 5 - 7 September. RILEM Publications s.a.r.l.. pp. 309 - 316.

Hou, J., Bonser, RHC. and Jeronimidis, G. (2011) 'Design of a biomimetic skin for an octopus-inspired robot — Part I: Characterising octopus skin'. Journal of Bionic Engineering, 8 (3). pp. 288 - 296. ISSN: 1672-6529

Halliday, I., Atherton, M., Care, CM., Collins, MW., Evans, D., Evans, PC., Hose, DR., Khir, AW., König, CS., Krams, R., Lawford, PV., Lishchuk, SV., Pontrelli, G., Ridger, V., Spencer, TJ., Ventikos, Y., Walker, DC. and Watton, PN. et al. (2011) 'Multi-scale interaction of particulate flow and the artery wall'. Medical Engineering and Physics, 33 (7). pp. 840 - 848. ISSN: 1350-4533 Open Access Link

Cashell, KA., Elghazouli, AY. and Izzuddin, BA. (2011) 'Failure assessment of lightly reinforced floor slabs. I: Experimental investigation'. Journal of Structural Engineering, 137 (9). pp. 977 - 988. ISSN: 0733-9445 Open Access Link

Umar, AS., Swash, RM. and Sadka, AH. (2011) 'Subjective quality assessment of 3D videos'. AFRICON, 2011. pp. 1 - 6. ISSN: 2153-0025

Vlachos, N. and Chang, ITH. (2011) 'Graphical and statistical comparison of various size distribution measurement systems using metal powders of a range of sizes and shapes'. Powder Metallurgy, 54 (4). pp. 497 - 506. ISSN: 0032-5899

Hou, J., Bonser, RHC. and Jeronimidis, G. (2011) 'Design of a biomimetic skin for an octopus-inspired robot — Part II: Development of the skin artefact'. Journal of Bionic Engineering, 8 (3). pp. 297 - 304. ISSN: 1672-6529

Hussaini, N., Winter, M. and Gumel, AB. (2011) 'Qualitative assessment of the role of public health education program on HIV transmission dynamics'. Mathematical Medicine and Biology, 28 (3). pp. 245 - 270. ISSN: 1477-8599

Xu, Y. and Mellor, BG. (2011) 'Application of acoustic emission to detect damage mechanisms of particulate filled thermoset polymeric coatings in four point bend tests'. Surface and Coatings Technology, 205 (23-24). pp. 5478 - 5482. ISSN: 0257-8972

Kazilas, MC. (2011) 'Industrial dielectric cure monitoring and its application to out-of-autoclave cure monitoring and control'. International SAMPE Technical Conference.